The origin and accumulation model of crude oils from oil reservoirs Chang 9 and Chang 10 in the Yanchang Formation of the Ordos Basin

In the lower parts of oil reservoirs Chang 9 and Chang 10 of the Yanchang Formation are oil-bearing layers newly found in oil exploration in the Ordos Basin.Based on GC,GC-MS analyses of saturated hydrocarbons from crude oils and source rocks,reservoir fluid inclusions and BasinMod,the origin of crude oils,accumulation period and accumulation models are discussed in combination with other petroleum geology data in this paper.The result shows that(1) there are two different types of crude oils in oil reservoir Chang 9 in the Longdong and Jiyuan regions:crude oils of typeⅠ(Well D86,Well A44,Well A75,Well B227,Well X62 and Well Z150) are mainly de-rived from the Chang 7 source rocks(including mudstones and shales) and distributed in the Jiyuan and Longdong regions;those of typeⅡ(Well Z14 and Well Y427),are distributed in the Longdong region,which are derived from the Chang 9 source rocks.Crude oils from oil reservoir Chang 10 in the Shanbei region are mainly derived from the Chang-9 source rocks;(2) there are two phases of hydrocarbon filling in oil reservoir Chang 9 in the Jiyuan and Longdong regions and oil reservoir Chang 10 in the Shanbei region:The first phase started at the early stage of J2z.The process of hydrocarbon filling was discontinuous in the Late Jurassic,because of the tectonic-thermal event in the Ordos Basin.The second phase was the main accumulation period,and hydrocarbons began to accumulate from the late stage of J2a to the middle-late of K1,mainly at the middle-late stage of K1;(3) there exist two types of accu-mulation models in oil reservoirs Chang 9 and Chang 10 of the Yanchang Formation:source rocks of the reservoirs in oil reservoir Chang 9 in the Jiyuan region and oil reservoir Chang 10 in the Shanbei region,the mixed type of reservoirs on the lateral side of source rocks and source rocks of the reservoirs in oil reservoir Chang 9 in the Long-dong region.

A quantitative evaluation for well pattern adaptability in ultra-low permeability oil reservoirs:A case study of Triassic Chang 6 and Chang 8 reservoirs in Ordos Basin

Based on the previous studies and development practice in recent 10 years, a quantitative evaluation method for the adaptability of well patterns to ultra-low permeability reservoirs was established using cluster analysis and gray correlation method, and it includes 10 evaluation parameters in the four aspects of optimal evaluation parameters, determination of weights for evaluation parameters, development stage division, and determination of classification coefficients. This evaluation method was used to evaluate the well pattern adaptability of 13 main ultra-low permeability reservoirs in Triassic Chang 6 and Chang 8 of Ordos Basin. Three basic understandings were obtained: Firstly, the well pattern for ultra-low permeability type-I reservoirs has generally good adaptability, with proper well pattern forms and well pattern parameters. Secondly, square inverted nine-spot well pattern is suitable for reservoirs with no fractures; rhombic inverted nine-spot injection pattern is suitable for reservoirs with some fractures; and rectangular well pattern is suitable for reservoirs with rich fractures. Thirdly, for the ultra-low permeability type-Ⅱ and type-Ⅲ reservoirs, with the principles of well pattern form determination, the row spacing needs to be optimized further to improve the level of development of such reservoirs.

Evaluation of reservoir environment by chemical properties of reservoir water‒A case study of Chang 6 reservoir in Ansai oilfield,Ordos Basin,China

The Ordos Basin is the largest continental multi-energy mineral basin in China,which is rich in coal,oil and gas,and uranium resources.The exploitation of mineral resources is closely related to reservoir water.The chemical properties of reservoir water are very important for reservoir evaluation and are significant indicators of the sealing of reservoir oil and gas resources.Therefore,the caprock of the Chang 6 reservoir in the Yanchang Formation was evaluated.The authors tested and analyzed the chemical characteristics of water samples selected from 30 wells in the Chang 6 reservoir of Ansai Oilfield in the Ordos Basin.The results show that the Chang 6 reservoir water in Ansai Oilfield is dominated by calcium-chloride water type with a sodium chloride coefficient of generally less than 0.5.The chloride magnesium coefficients are between 33.7 and 925.5,most of which are greater than 200.The desulfurization coefficients range from 0.21 to 13.4,with an average of 2.227.The carbonate balance coefficients are mainly concentrated below 0.01,with an average of 0.008.The calcium and magnesium coefficients are between 0.08 and 0.003,with an average of 0.01.Combined with the characteristics of the four-corner layout of the reservoir water,the above results show that the graphics are basically consistent.The study indicates that the Chang 6 reservoir in Ansai Oilfield in the Ordos Basin is a favorable block for oil and gas storage with good sealing properties,great preservation conditions of oil and gas,and high pore connectivity.

Diageneses and Their Influences on Reservoir Properties of Chang 2 Oil Member in Renshan Region, Zhidan Oilfield, Ordos Basin

1 Introduction Yanchang Formation in Upper Triassic,Ordos basin contains the most abundant hydrocarbon resources in North China(Wang et al.,2014).The sandstones are the most important oil-bearing reservoirs in Yanchang

Formation patterns of Chang 9 oil reservoir in Triassic Yanchang Formation, Ordos Basin, NW China

Based on analysis of main controlling factors of Chang 9, the source rock, driving force of migration, migration and accumulation modes, reservoir forming stages and model and enrichment law of Chang 9 reservoir were examined. The study showed that the oil of Chang 9 reservoir in the Jiyuan and Longdong(Eastern Gansu) areas came primarily from the source rock of Chang 7 Member, but the oil of Chang 9 reservoir in the Zhidan area came primarily from the source rock of Chang 9 Member. There developed lithologic-structural oil reservoirs in Gufengzhuang-Mahuangshan area in northwest Jiyuan, structural-lithologic oil reservoirs in east Jiyuan, and lithologic reservoirs in Huachi–Qingcheng area and Zhidan area. The overpressure of Chang 7 Member was the driving force of oil migration. The burial history showed that Chang 9 Member experienced two stages of reservoir forming, the reservoir formed in the Late Jurassic was smaller in charging scope and scale, and the Early Cretaceous was the period when the source rock generated oil and gas massively and the Chang 9 reservoir came into being. Along with the tectonic movements, Chang 7 bottom structure turned from high in the west and lower in the East in the sedimentary stage to high in the east and lower in the west in the hydrocarbon accumulation stage and at last to gentle western-leaning monoclinal structure at present. In Early Cretaceous, the Chang 7 bottom structure was the lowest in the west of Huanxian-Huachi-Wuqi-Dingbian areas, so the oil migrated laterally towards the higher positions around after entering the reservoir. In the main reservoir forming period, Chang 7 bottom had an ancient anticline in Mahuangshan-Hongjingzi area of west Jiyuan, controlling the oil reservoir distribution in west Jiyuan.

Main Controlling Factors and Accumulation Model of Chang 9 Reservoir in Northwest Ordos Basin, China

In northwestern Ordos Basin, the Triassic reservoir Chang 9 has favorable reservoir forming conditions, extensive reservoir development, and huge potential for oil exploration and exploitation. Studying the main controlling factors and accumulation model of Chang 9 reservoir in this area can provide a basis for the production targets, and assist in formulating reasonable development technology policy. In this paper, to explore and summarize the hydrocarbon accumulation model, the Chang 9 reservoir were analyzed from the aspects of oil source, fracture, oil migration, structure, lithology and reservoir physical properties for the main controlling factors in this area. Organic geochemical and geological comprehensive analysis that the oil-source of the Chang 9 reservoir in the northwest of Ordos Basin is derived from Chang 7 hydrocarbon source rocks. The fractures provide a sound channel for the "vertical multi-point filling" of the oil source from Chang 7 to Chang 9. The crude oil migrates vertically from Chang 7 to Chang 9, then expands horizontally to form a reservoir. Structures play an important role in controlling the distribution of reservoirs, the control by sand in small layer and physical property is also obvious. This paper creatively establishes the reservoir accumulation model of Chang 9 in northwest of Ordos Basin, which is characterized by Vertical multi-point filling, horizontal expansion becomes oil pool. It reveals the genetic mechanism of the development of Chang 9 multi-reservoir in the study area, which provides guidance for exploration and evaluation deployment.

Predicting the present-day in situ stress distribution within the Yanchang Formation Chang 7 shale oil reservoir of Ordos Basin, central China

The Yanchang Formation Chang 7 oil-bearing layer of the Ordos Basin is important in China for producing shale oil.The present-day in situ stress state is of practical implications for the exploration and development of shale oil;however,few studies are focused on stress distributions within the Chang 7 reservoir.In this study,the present-day in situ stress distribution within the Chang 7 reservoir was predicted using the combined spring model based on well logs and measured stress data.The results indicate that stress magnitudes increase with burial depth within the Chang 7 reservoir.Overall,the horizontal maximum principal stress(SHmax),horizontal minimum principal stress(Shmin) and vertical stress(Sv) follow the relationship of Sv≥SHmax>Shmin,indicating a dominant normal faulting stress regime within the Chang 7 reservoir of Ordos Basin.Laterally,high stress values are mainly distributed in the northwestern parts of the studied region,while low stress values are found in the southeastern parts.Factors influencing stress distributions are also analyzed.Stress magnitudes within the Chang 7 reservoir show a positive linear relationship with burial depth.A larger value of Young's modulus results in higher stress magnitudes,and the differential horizontal stress becomes higher when the rock Young's modulus grows larger.

Pore structure differences of the extra-low permeability sandstone reservoirs and the causes of low resistivity oil layers: A case study of Block Yanwumao in the middle of Ordos Basin, NW China

The influence of pore structure difference on rock electrical characteristics of reservoir and oil reservoir was analyzed taking Triassic Chang 6 reservoir in Block Yanwumao in the middle of Ordos Basin as an example. The relationship between the pore structure difference and the low resistivity oil layer was revealed and demonstrated through core observation, lab experiments, geological research, well log interpretation and trial production etc. The results show that there were two kinds of oil layers in Chang 6 oil layer set, normal oil layer and low resistivity oil layer in the region, corresponding to two types of pore structures, pore type mono-medium and micro-fracture-pore type double-medium; the development of micro-fracture changed greatly the micro-pore structure of the reservoir, and the pore structure difference had an important influence on the rock electrical characteristics of the extra-low permeability sandstone reservoir and oil reservoir; the normal oil layers had obvious characteristics of pore-type mono-medium, and were concentrated in Chang 61, Chang 6232 and Chang 62; the low resistivity oil layers had obvious characteristics of micro-fracture-pore type double-medium, which were mainly distributed in Chang 612 and Chang 63. The mud filtrate penetrated deep into the oil layers along the micro-cracks, leading to sharp reduction of resistivity, and thus low resistivity of the oil layer; the low resistivity oil layers had better storage capacity and higher productivity than the normal oil layers.

吴起油田白豹地区东部长8、长9储层特征研究

对鄂尔多斯盆地吴起油田白豹东部地区长8、长9储层进行储层特征研究。结果表明:白豹东部长8和长9储层的砂岩多为长石砂岩和岩屑长石砂岩;储层孔喉类型属于细孔粗喉,渗透率为强非均质型;长8砂体发育好,长9砂体发育程度差。同时储层敏感性研究表明:白豹项目区的长8、长9储层均为弱-中速敏、弱水敏和弱碱敏及中偏弱应力敏特征,但长8储层显示为弱酸敏,长9储层为强酸敏。

鄂尔多斯盆地英旺地区长9、长10油层组油源及成藏分析

近年来,在鄂尔多斯盆地英旺地区上三叠统延长组长9、长10油层组发现了油气藏。通过烃源岩特征分析、油-源对比、成藏特征分析等发现,英旺地区长9油层组烃源岩为一套好烃源岩,但其生成的油气可能优先侧向运移到了志丹等地区成藏,对英旺地区长9、长10油层组油气藏贡献不大。英旺地区长9、长10油层组中的油气主要来自华池—太白—正宁—英旺一带的长7油层组烃源岩。烃源岩成岩演化过程中产生的异常压力为油气运移的主要动力,孔隙和裂缝为油气运移的主要输导体系,油气沿孔隙-裂缝输导体系进行垂向-侧向运移,遇砂体即充注成藏。

鄂尔多斯盆地南缘长10—长9油层组沉积特征

鄂尔多斯盆地三叠系延长组是主要勘探目标之一。以鄂尔多斯盆地南缘露头剖面详细勘探为基础,结合前人成果,对岩性和岩石组合、沉积相特征及时空演化进行系统分析。结果表明:鄂尔多斯盆地南缘长10—长9油层组可划分9种岩相类型,发育曲流河、曲流河三角洲及辫状河三角洲3种沉积相,曲流河相发育河床滞留沉积、边滩、天然堤及决口扇4种微相,曲流河三角洲发育水下分流河道、水下天然堤、分流间湾、河口坝及远沙坝5种微相,辫状河三角洲发育水下分流河道、分流河道间2种微相;长10—长9油层组垂向上具有粗—细—粗的复合韵律特征;曲流河砂体、三角洲前缘砂体是油气运移聚集的主要场所。

Factors controlling the reservoir accumulation of Triassic Chang 6 Member in Jiyuan-Wuqi area,Ordos Basin,NW China

In the Triassic Yanchang Formation, Jiyuan-Wuqi area, Ordos Basin, the Chang 6 reservoir is contacted to the Chang 7 high-quality source rock, but the oil pools are unevenly distributed, and complex in oil and water distribution. Through cores observation and fracture statistics, combined with comprehensive analyses of physical property, mercury injection, logging and geochemical data, and comparisons of the sandbodies scales, reservoir physical properties, argillaceous laminae and fractures between source and reservoir in the eastern and western oil-bearing areas and in the central water producing area, it is found that the hydrocarbon accumulation patterns are different in the eastern, central and western areas, and the characteristics of hydrocarbon migration under the background of double-provenance were sorted out. The study results show that the crude oil in the eastern area has different Pr/Ph and sterane distribution from that in the western area. The oil and gas primarily migrated vertically. The high-quality source rocks and favorable source-reservoir-cap combinations lay the foundation for large-scale oil and gas accumulations. Vertically, the oil and gas enrichment is controlled by the scale of sandbody and the difference of physical properties, while on the plane, it is controlled by the connectivity of sandbodies, the argillaceous laminae between source rock and reservoir, the reservoir physical property and the fractures. The sandbodies of oil-rich zones in the eastern and western areas have large thickness, low shale content, good physical properties, weak heterogeneity, few argillaceous laminae and abundant fractures, all of which are favorable for the vertical migration and accumulation of oil and gas. In contrast, in the middle area with converging provenances, the reservoirs, composed of thin sandbodies, features rapid variation in lithology and physical properties, strong heterogeneity, poor continuity of sandbodies, abundant argillaceous laminae between source rock and reservoir, and few fractures, makes it difficult for the oil and gas to migrate vertically, and results in low oil enrichment degree ultimately. For the exploration of continental multiple-provenance tight reservoirs, not only the good-property source rocks and reservoirs, but more importantly the source-reservoir contact relationship and the effect of fractures on the hydrocarbon migration and accumulation should be considered.

鄂尔多斯盆地中部罗庞塬地区长7储层控油性及有利区评价

致密油分布的控制因素研究与有利区评价影响着非常规油气的勘探部署。以鄂尔多斯盆地罗庞塬地区长7油层组致密油为研究对象,利用测井、钻井、岩心、压汞、试油成果等资料,研究储层砂体厚度、岩性、储集空间和物性等特征,明确油藏类型,探讨储层条件对致密油的控制作用并评价了有利区。研究表明:罗庞塬地区长7砂体厚度平均为22.6 m,储层岩性主要为细粒度的长石砂岩,储集空间以粒间溶蚀孔和粒间孔为主,其孔隙度平均为8.04%,渗透率平均为0.36×10^(-3)μm^(2),发育小孔-细喉型、细孔-细喉型和微孔-微喉型储层,油藏类型为透镜状致密油藏,呈现出成群、成带的准连续型分布特征,其分布主要受砂体厚度、砂地比、孔隙度、渗透率和砂岩泥质含量的控制,砂体厚度大、泥质含量低、物性好的细砂岩有利于致密油的富集。采用综合指数法,评价出长7油层有4个Ⅰ类区和5个Ⅱ类有利勘探区。

姬塬地区长8油层组储层特征分析

为确定长8油层储层现今表征,储层物性受黏土矿物胶结物控制模式,储层沉积作用和沉积后期所经历的成岩变化,通过铸体薄片、扫描电镜等方法研究了储层基本特征和成岩作用及沉积作用,在整体低渗的背景下,部分位于相对渗透率较高区域的油井有较高的产量,理清研究区长8储层富集规律,对地区内岩石孔隙度下降因素进行剖析。结果表明,姬塬地区有利储层多发育水下分流河道和河口坝沉积,特别是砂体中心部位储层物性是最好,可见长8油层组的储集性能和渗流性能好,即粒间孔型、粒间孔+溶孔型和溶孔+粒间孔型。溶孔型、粒间孔+微孔型两种孔隙组合类型的渗流性能较差。微孔型和溶孔+微孔型两种孔隙组合类型的储集空间主要由半径极小的微孔构成,连通性较差,其孔隙内表面积和渗流阻力,储集性能和渗流性能较差。

鄂尔多斯盆地延长组长9油层组成藏地质条件

通过对鄂尔多斯盆地长9油层组成藏地质条件的分析,认为长9油藏的油源主要来自于上覆长7油层组和其本身两套烃源岩,但志丹地区长9油藏原油来源于长9烃源岩,无长7烃源岩的混入。长9油层组含油段主要集中在长91亚段,储集体主要发育于辫状河三角洲平原相分流河道砂体及三角洲前缘水下分流河道砂体,部分为半深湖亚相浊积岩砂体。长9储层的岩石类型主要为岩屑长石砂岩,以粒间孔为主,孔隙度、渗透率总体较低。平面上储层物性分布差异性较大,姬塬地区砂岩粒度粗,粒间孔发育,物性最好;而发育碳酸盐胶结物的洛川地区孔隙不发育,物性最差。根据源-储关系,长9油层组主要发育上生下储、自生自储两种成藏组合类型。据综合分析,姬塬地区成藏条件较好,为下一步勘探的最有利区。

鄂尔多斯盆地合水地区三叠系长7段夹层型页岩油储层特征及主控因素

运用铸体薄片、扫描电镜、黏土矿物X射线衍射、电子探针、阴极发光、高压压汞、物性测试等资料,对鄂尔多斯盆地西南部合水地区三叠系延长组长7段夹层型页岩油储层特征及储层致密化主控因素进行了研究,建立了储层定量评价标准,并预测出有利储层分布。研究结果表明:(1)鄂尔多斯盆地合水地区三叠系长7段夹层型页岩油储层主要为岩屑长石砂岩与长石岩屑砂岩,成分成熟度低、填隙物含量高、孔喉结构复杂,具有高孔低渗特征。(2)胶结作用是研究区长7段夹层型页岩油储层致密化的主控因素,储层平均视胶结率为86.3%,达到强胶结程度,以自生黏土矿物中的伊利石胶结为主;压实作用对储层致密化起次要作用,储层平均视压实率为46.0%,为中等压实程度;溶蚀作用降低了储层的致密化程度,但储层渗流能力较低,酸性流体难以大规模溶蚀,平均视溶蚀率仅为13.8%,为弱溶蚀程度。(3)受中等压实—弱溶蚀—强胶结成岩作用的影响,储层非均质性较强,成岩系数差异较大。Ⅰ类储层成岩系数大于2.4,Ⅱ1类储层成岩系数为1.8~2.4,Ⅱ2类储层成岩系数为1.2~<1.8,Ⅲ类储层成岩系数小于1.2,Ⅰ类与Ⅱ1类储层为有利储层。区域上中部混源区有利储层发育规模最大,是勘探的主要目标区。

鄂尔多斯盆地陕北地区长10油源及成藏条件分析

在鄂尔多斯盆地的陕北志丹地区勘探发现了长10油藏,原油密度为0.8152g/cm3,全烃色谱图的主峰为nC13～nC15,油质较轻。轻烃组分中环烷烃较为丰富,芳烃含量低,呈姥植均势(Pr/Ph为1.21～1.45),原油的δ13CPDB值为-31.78‰,甾萜烷分布与主要参数特征为:重排藿烷类相对丰度很高、伽马蜡烷低,Ts/Tm比值很高(5.54～7.26),C30*/C30藿烷比值高(0.67～0.72),C29Ts/C30藿烷比值高(0.38～0.52),甾烷中重排甾烷较高、αβ和βα构型甾烷丰富,ααα-20R构型甾烷呈不对称"V"型分布,反映了较为典型的湖相油型油特征。油-油、油-源对比显示,该区长10原油来自长7优质烃源岩。石油可能是在湖盆中部长7优质烃源岩发育的地区通过垂向倒灌进入长10油层组、经侧向运聚成藏的。据此,预测盆地长9和长10油层组具备良好的成藏与勘探潜力。

鄂尔多斯盆地古峰庄—王洼子地区长9油层组流体过剩压力与油气运移研究

近几年,在鄂尔多斯盆地上三叠统长9油层组中不断有新的油气发现,因而对长9油层组石油运移的认识对进一步的勘探开发愈发重要。本文通过对古峰庄-王洼子地区延长组长7—长9油层组流体过剩压力的计算,并结合地球化学特征分析,对该地区长9油藏形成时的油气运移的动力特征进行了研究。结果表明,古峰庄—王洼子地区延长组长9油层组石油和长7油层组烃源岩具有相似的地球化学特征,长9原油可能主要来自于其上部长7油层组源岩。长7油层组源岩层具有远远大于长9油层的过剩压力分布,二者之间具有14MPa以上过剩压力差值,成为长7油气向长9油层组储层运移的主要动力。

鄂尔多斯盆地东南部长7段页岩油气富集主控因素

为明确鄂尔多斯盆地东南部长7段页岩油气富集主控因素,综合钻井、测井、岩心分析化验等资料,对研究区长7段页岩油气富集程度及其机理进行研究。页岩解析气量与烃源岩总有机碳含量呈正比,有机质含量控制页岩油气的总含量,有机质发育大量孔隙,页岩油气以吸附态和游离态赋存于有机孔隙中。储集层孔隙结构和孔隙度影响页岩油气的含量及赋存状态,吸附油气主要赋存于微孔中,游离油气主要赋存于中孔和大孔中,但中孔中游离气含量高于大孔,而孔隙度越大,页岩中油气绝对含量越高。砂岩夹层和富有机质页岩的配置关系控制着页岩油气的富集部位,根据粉砂岩、细砂岩与页岩的关系,延长组长7段页岩油气可划分为近源和源内2类,源内又可分为砂岩与页岩互层型、页岩夹砂岩型和页岩型;下伏于富有机质页岩中的砂体和透镜状砂体油气含量最高,其次是上覆于富有机质页岩的砂体和呈舌状或指状与富有机质页岩接触的砂体。

鄂尔多斯盆地马岭—乔川地区长6油层组油藏分布特征及控制因素

基于岩心观察、测井解释及开采数据分析,结合流体包裹体等测试,对马岭—乔川地区长6油层组的油藏分布特征及控制因素开展研究。研究结果表明,研究区油藏纵向上主要分布在长63油层段,长62、长61油层段含油性显著变差;平面上,长63油层段以L125,B452和L411井区为中心,油藏团块状分布,呈两条带沿北西南东向延伸,油层厚度主要在5~20 m之间,长62、长61油层呈孤立土豆疙瘩状分布,分布规模小。长6油层组油藏以岩性油藏为主,包裹体均一温度集中在70~90℃,荧光以黄褐色为主,结合区域埋藏史分析显示该区油藏充注为晚侏罗世和中-晚白垩世,表现为早期充注。长6油层组烃源岩厚度、距离,砂体砂质碎屑流砂体性质、物性和叠置类型是其形成油气藏的重要影响因素;长63油层段相比长62和长61油层段具有更靠近烃源岩,砂质碎屑流成因砂体分布广、孔渗条件好、叠置厚层砂体类型发育等优势。研究区最为有利油藏的勘探目标为长63油层段Y470,L374,B452等井区附近,有利勘探区面积达到517.28 km 2。