Development characteristics and controlling factors of fractures in lacustrine shale and their geological significance for evaluating shale oil sweet spots in the third member of the Shahejie Formation in the Qikou Sag, Bohai Bay Basin

Natural fractures are critical for shale oil and gas enrichment and development. Due to the extremely high heterogeneity of shale, the factors controlling the formation of internal fractures, especially horizontal fractures, remain controversial. In this study, we integrate thin section analysis and microcomputed tomography(CT) data from several lacustrine shale samples from the third member(Es3) of the Shahejie Formation, Qikou Sag, Bohai Bay Basin, to assess the fractures in detail. The goal is to reveal the development characteristics, controlling factors, and geological significance for evaluating sweet spots in a shale oil play. The fractures in the Es3contain high-angle structural and horizontal bed-parallel fractures that are mostly shear and extensional. Various factors influence fracture development,including lithofacies, mineral composition, organic matter content, and the number of laminae. Structural fractures occur predominantly in siltstone, whereas bed-parallel fractures are abundant in laminated shale and layered mudstone. A higher quartz content results in higher shale brittleness, causing fractures, whereas the transformation between clay minerals contributes to the development of bedparallel fractures. Excess pore pressure due to hydrocarbon generation and expulsion during thermal advance can cause the formation of bed-parallel fractures. The density of the bed-parallel and structural fractures increases with the lamina density, and the bed-parallel fractures are more sensitive to the number of laminae. The fractures are critical storage spaces and flow conduits and are indicative of sweet spots. The laminated shale in the Es3with a high organic matter content contains natural fractures and is an organic-rich, liquid-rich, self-sourced shale play. Conversely, the siltstone, massive mudstone, and argillaceous carbonate lithofacies contain lower amounts of organic matter and do not have bed-parallel fractures. However, good reservoirs can form in these areas when structural fractures are present and the source, and storage spaces are separated.

Enrichment model and major controlling factors of below-source tight oil in Lower Cretaceous Fuyu reservoirs in northern Songliao Basin,NE China

Based on the geochemical,seismic,logging and drilling data,the Fuyu reservoirs of the Lower Cretaceous Quantou Formation in northern Songliao Basin are systematically studied in terms of the geological characteristics,the tight oil enrichment model and its major controlling factors.First,the Quantou Formation is overlaid by high-quality source rocks of the Upper Cretaceous Qingshankou Formation,with the development of nose structure around sag and the broad and continuous distribution of sand bodies.The reservoirs are tight on the whole.Second,the configuration of multiple elements,such as high-quality source rocks,reservoir rocks,fault,overpressure and structure,controls the tight oil enrichment in the Fuyu reservoirs.The source-reservoir combination controls the tight oil distribution pattern.The pressure difference between source and reservoir drives the charging of tight oil.The fault-sandbody transport system determines the migration and accumulation of oil and gas.The positive structure is the favorable place for tight oil enrichment,and the fault-horst zone is the key part of syncline area for tight oil exploration.Third,based on the source-reservoir relationship,transport mode,accumulation dynamics and other elements,three tight oil enrichment models are recognized in the Fuyu reservoirs:(1)vertical or lateral migration of hydrocarbon from source rocks to adjacent reservoir rocks,that is,driven by overpressure,hydrocarbon generated is migrated vertically or laterally to and accumulates in the adjacent reservoir rocks;(2)transport of hydrocarbon through faults between separated source and reservoirs,that is,driven by overpressure,hydrocarbon migrates downward through faults to the sandbodies that are separated from the source rocks;and(3)migration of hydrocarbon through faults and sandbodies between separated source and reservoirs,that is,driven by overpressure,hydrocarbon migrates downwards through faults to the reservoir rocks that are separated from the source rocks,and then migrates laterally through sandbodies.Fourth,the differences in oil source conditions,charging drive,fault distribution,sandbody and reservoir physical properties cause the differential enrichment of tight oil in the Fuyu reservoirs.Comprehensive analysis suggests that the Fuyu reservoir in the Qijia-Gulong Sag has good conditions for tight oil enrichment and has been less explored,and it is an important new zone for tight oil exploration in the future.

Control Effect of Vegetable Oil on Cucumber Powdery Mildew

[Objective] The study discussed the indoor activity and field control effect of vegetable oil on cucumber powdery mildew.[Method] The cucumber seedlings of Changchunmici were adopted as the material,which were inoculated with the fungus pathogen of cucumber powdery mildew naturally occurred in the field.The indoor protective test and field test were performed respectively to observe the control effects of different plant oils EC on the cucumber powdery mildew.[Result] When six plant oils EC including cottonseed oil,soybean oil,canola oil,corn oil,sesame oil and sunflower oil was diluted into 10 and 5 ml/L,they had better control effect on cucumber powdery mildew.As for the indoor protective effect,the protective effect of the vegetable oil EC was equivalent to the control agent triadimefon EC,the field control effect of vegetable oil EC was in the range of 60%-75%,which was consistent with 69%-70% control effect of contrast agent with 1 ml/L triadimefon EC dilution.[Conclusion] All vegetable oils EC had significant control effect on cucumber powdery mildew in the test.

Micro-geological causes and macro-geological controlling factors of low-resistivity oil layers in the Puao Oilfield

Low-resistivity oil layers are often missed in logging interpretation because of their resistivity close to or below the resistivity of nearby water layers. Typical low-resistivity oil layers have been found in the past few years in the Putaohua reservoir of the Puao Oilfield in the south of the Daqing placanticline by detailed exploration. Based on a study of micro-geological causes of low-resistivity oil layers, the macro-geological controlling factors were analyzed through comprehensive research of regional depositional background, geological structure, and oil-water relations combined with core, water testing, well logging, and scanning electron microscopy data. The results showed that the formation and distribution of Putaohua low-resistivity oil layers in the Puao Oilfield were controlled by depositional environment, sedimentary facies, diagenesis, motive power of hydrocarbon accumulation, and acidity and alkalinity of reservoir liquid. The low-resistivity oil layers caused by high bound-water saturation were controlled by deposition and diagenesis, those caused by high free-water saturation were controlled by structural amplitude and motive power of hydrocarbon accumulation. Those caused by formation water with high salinity were controlled by the ancient saline water depositional environment and faulted structure and those caused by additional conductivity of shale were controlled by paleoclimate and acidity and alkalinity of reservoir liquid. Consideration of both micro-geological causes and macro-geological controlling factors is important in identifying low-resistivity oil layers.

Controlling factors of remaining oil distribution after water flooding and enhanced oil recovery methods for fracturecavity carbonate reservoirs in Tahe Oilfield

Based on comprehensive analysis of core, well logging, seismic and production data, the multi-scale reservoir space, reservoir types, spatial shape and distribution of fractures and caves, and the configuration relationship with production wells in fracture-cavity carbonate reservoirs were studied systematically, the influence of them on the distribution of residual oil was analyzed, and the main controlling factors mode of residual oil distribution after water flooding was established. Enhanced oil recovery methods were studied considering the development practice of Tahe oilfield. Research shows that the main controlling factors of residual oil distribution after water flooding in fracture-cavity carbonate reservoirs can be classified into four categories: local high point, insufficient well control, flow channel shielding and weak hydrodynamic. It is a systematic project to improve oil recovery in fracture-cavity carbonate reservoirs. In the stage of natural depletion, production should be well regulated to prevent bottom water channeling. In the early stage of waterflooding, injection-production relationship should be constructed according to reservoir type, connectivity and spatial location to enhance control and producing degree of waterflooding and minimize remaining oil. In the middle and late stage, according to the main controlling factors and distribution characteristics of remaining oil after water flooding, remaining oil should be tapped precisely by making use of gravity differentiation and capillary force imbibition, enhancing well control, disturbing the flow field and so on. Meanwhile, backup technologies of reservoir stimulation, new injection media, intelligent optimization etc. should be developed, smooth shift from water injection to gas injection should be ensured to maximize oil recovery.

Characteristics and Controlling Factors of Shale Oil Reservoir Spaces in the Bohai Bay Basin

The Cenozoic continental strata of the Bohai Bay Basin are rich in shale oil resources, and they contain various types of reservoir spaces that are controlled by complex factors. Using field emission scanning electron microscopy(FESEM), automatic mineral identification and characterization system(AMICS), CO2 and N2 gas adsorption, and focused ion beam scanning electron microscopy(FIB-SEM), the types of shale reservoir spaces in the Bohai Bay Basin are summarized, the spatial distribution and connectivity of the various types of pores are described in detail, the microscopic pore structures are characterized, and the key geological mechanisms affecting the formation and evolution of the reservoir spaces are determined. Three conclusions can be drawn in the present study. First, the shale reservoir spaces in the Bohai Bay Basin can be divided into three broad categories, including mineral matrix pores, organic matter pores, and micro fractures. Those spaces can be subdivided into seven categories and fourteen sub-categories based on the distribution and formation mechanisms of the pores. Second, the complex pore-throat structures of the shale reservoir can be divided into two types based on the shape of the adsorption hysteresis loop. The pore structures mainly include wedge-shaped, flat slit-shaped, and ink bottle-shaped pores. The mesopores and micropores are the main contributors to pore volume and specific surface area, respectively. The macropores provide a portion of the pore volume, but they do not significantly contribute to the specific surface area. Third, the factors controlling the development of microscopic pores in the shale are complex. The sedimentary environment determines the composition and structure of the shale and provides the material basis for pore development. Diagenesis controls the types and characteristics of the pores. In addition, the thermal evolution of the organic matter is closely related to inorganic diagenesis and drives the formation and evolution of the pores.

Crude oil cracking in deep reservoirs:A review of the controlling factors and estimation methods

The natural cracking of crude oils in deep reservoirs has gained great interest due to continuously increasing depth of petroleum exploration and exploitation.Complex oil compositions and surroundings as well as complicated geological evolutions make oil cracking in nature much more complex than industrial pyrolysis.So far,numerous studies,focused on this topic,have made considerable progress although there still exist some drawbacks.However,a comprehensive review on crude oil cracking is yet to be conducted.This article systematically reviews the controlling factors of oil cracking from six aspects,namely,oil compositions,temperature and time,pressure,water,minerals and solid organic matter.We compare previous experimental and modelling results and present new field cases.In the following,we evaluate the prevailing estimation methods for the extent of oil cracking,and elucidate other factors that may interfere with the application of these estimation methods.This review will be helpful for further investigations of crude oil cracking and provides a guide for estimation of the cracking extent of crude oils.

Controlling factors and models of shale oil enrichment in Lower Permian Fengcheng Formation,Mahu Sag,Junggar Basin,NW China

Based on the combination of core observation,experimental analysis and testingand geological analysis,the main controlling factors of shale oil enrichment in the Lower Permian Fengcheng Formation in the Mahu Sag of the Junggar Basin are clarified,and a shale oil enrichment model is established.The results show that the enrichment of shale oil in the Fengcheng Formation in the Mahu Sag is controlled by the organic abundance,organic type,reservoir capacity and the amount of migration hydrocarbon in shale.The abundance of organic matter provides the material basis for shale oil enrichment,and the shales containing typesⅠandⅡorganic matters have good oil content.The reservoir capacity controls shale oil enrichment.Macropores are the main space for shale oil enrichment in the Fengcheng Formation,and pore size and fracture scale directly control the degree of shale oil enrichment.The migration of hydrocarbons in shale affects shale oil enrichment.The shale that has expelled hydrocarbons has poor oil content,while the shale that has received hydrocarbons migrated from other strata has good oil content.Lithofacies reflect the hydrocarbon generation and storage capacity comprehensively.The laminated felsic shale,laminated lime-dolomitic shale and thick-layered felsic shale have good oil content,and they are favorable lithofacies for shale oil enrichment.Under the control of these factors,relative migration of hydrocarbons occurred within the Fengcheng shale,which leads to the the difference in the enrichment process of shale oil.Accordingly,the enrichment mode of shale oil in Fengcheng Formation is established as"in-situ enrichment"and"migration enrichment".By superimposing favorable lithofacies and main controlling factors of enrichment,the sweet spot of shale oil in the Fengcheng Formation can be selected which has great significance for the exploration and development of shale oil.

Enrichment of tight oil and its controlling factors in central and western China

Taking the tight oil of the Zhongnan sag in the Ordos Basin,Jimusar sag in the Junggar Basin and Qingxi sag in the Jiuquan Basin as study objects,based on field survey,dissection of tight oil reservoirs,sample test,modeling experiment and comprehensive analysis,this study reveals that the tight oil accumulates at start-up pressure,advances under differential pressure,diffuses at alternating fast and low speeds,charges in stepped large area and migrates rapidly through fractures,and enriches in dominant fractures and pores.The root cause of ladder-like charge is the multiple scales of pores.The widespread source rock with high hydrocarbon generation intensity is the material basis for tight oil enrichment;the dominant source reservoir assemblage is the basic unit for tight oil enrichment;fractures and beddings are conducive to local rapid migration of tight oil;fractures and pores work together to control the enrichment of tight oil.Two typical accumulation models of tight oil are established,namely"source reservoir in coexistence,four optimal factors controlling enrichment around central area,and large-scale continuous distribution"for a large freshwater lake clastic rock basin and"source reservoir integration,four optimal factors controlling enrichment,central area distribution,small in size but high in enrichment degree"for a small saline lake diamictite depression.

Conformance control by a microgel in a multi-layered heterogeneous reservoir during CO_(2) enhanced oil recovery process

Injecting CO_(2)into the underground for oil displacement and shortage is an important technique for carbon capture,utilization and storage(CCUS).One of the main problems during the CO_(2)injection is the channeling plugging.Finding an effective method for the gas channeling plugging is a critical issue in the CO_(2)EOR process.In this work,an acid-resistance microgel named dispersed particle gel(DPG)was characterized and its stability was tested in the CO_(2)environment.The microgel size selection strategies for the homogeneous and heterogeneous reservoirs were respectively investigated using the single core flooding and three parallel core flooding experiments.Moreover,the comparison of microgel alternate CO_(2)(MAC)injection and water alternate CO_(2)(WAC)injection in the dual core flooding experiments were presented for the investigation of the role of microgel on the conformance control in CO_(2)flooding process.The results have shown that the microgel featured with ANH and CAN groups can keep its morphology after aging 7 days in the CO_(2)environment.Where,the small microgel with unobstructed migration and large microgel with good plugging efficiency for the high permeability zone were respectively featured with the higher recovery factor in homogeneous and heterogeneous conditions,which indicate they are preferred used for the oil displacement and conformance control.Compared to WAC injection,MAC injection had a higher incremental recovery factor of 12.4%.It suggests the acid-resistance microgel would be a good candidate for the conformance control during CO_(2)flooding process.

U-model Enhanced Dynamic Control of a Heavy Oil Pyrolysis/Cracking Furnace

This paper proposes a case study in the control of a heavy oil pyrolysis/cracking furnace with a newly extended U-model based pole placement controller(U-PPC). The major work of the paper includes: 1) establishing a control oriented nonlinear dynamic model with Naphtha cracking and thermal dynamics; 2) analysing a U-model(i.e., control oriented prototype) representation of various popular process model sets; 3)designing the new U-PPC to enhance the control performance in pole placement and stabilisation; 4) taking computational bench tests to demonstrate the control system design and performance with a user-friendly step by step procedure.

Sludge Pollution Control from Crude Oil Tank Cleaning

This study investigated the use of microbial analysis as a bioremediation option for remediating petroleum sludge, which is part of the waste stream generated in the petroleum industry. The aim is to reduce environmental burden caused by the discharge of untreated sludge. Sludge sample was cultured in other to isolate microorganisms for the sludge treatment. The selected strain of the organisms after screening were Aspergillus flavus, Aspergillus niger, Verticillus sp, Penicillum sp, and Microsporium audouinii. Bioreactors (labeled A, B, C, D and O) were designed for the treatment of petroleum sludge. These reactors contain 2.0 × 10-2 m3 of the diluted sludge samples and the isolated organisms for the treatment process. On a weekly basis, the control reactors received 1.5 × 10-3 m3 of fresh and saline water respectively. After 12 weeks of treatment, sludge physicochemical characteristics showed distinct variations. From the result, reactor D was the best in terms of remediating the sludge as compared to other reactors. Friedman non-parametric test was performed to check if the weeks of treatment affected the reduction of the total hydrocarbon content (THC) in the five reactors and also checked for significant differences in the THC after treatments. The drop in the THC of the treated sludge ranged from 56.0% to 67.3%. These results showed the possibility of enhanced biodegradation of petroleum sludge by hydrocarbon utilizing microorganisms (fungi).

A novel approach of tight oil reservoirs stimulation based on fracture controlling optimization and design

To deal with the stress interference caused by simultaneous propagation of multiple fractures and the wettability reversal and physical property changes of the reservoir caused by fracturing fluid getting in during large-volume fracturing of tight oil reservoirs through a horizontal well, a non-planar 3D fracture growth model was built, wettability reversal characterizing parameters and change of relative permeability curve were introduced to correct the production prediction model of fractured horizontal well, a fracturing design optimization software(Fr Smart) by integrating geological and engineering data was developed, and a fracturing design optimization approach for tight oil reservoirs based on fracture control was worked out. The adaptability of the method was analyzed and the fracture parameters of horizontal wells in tight oil reservoirs were optimized. The simulation results show that fracturing technology based on fracture control is suitable for tight oil reservoirs, and by optimizing fracture parameters, this technology makes it possible to produce the maximum amount of reserves in the well-controlled unit of unconventional reservoirs. The key points of fracturing design optimization based on fracture control include increasing lateral length of and reducing the row spacing between horizontal wells, increasing perforation clusters in one stage to decrease the spacing of neighboring fractures, and also avoiding interference of old and new fracturing wells. Field tests show that this technology can increase single well production and ultimate recovery. Using this technology in developing unconventional resources such as tight oil reservoirs in China will enhance the economics significantly.

Elemental characteristics of lacustrine oil shale and its controlling factors of palaeo-sedimentary environment on oil yield： a case from Chang 7 oil layer of Triassic Yanchang Formation in southern Ordos Basin

As an important unconventional resource, oil shale has received widespread attention. The oil shale of the Chang 7 oil layer from Triassic Yanchang Formation in Ordos Basin represents the typical lacustrine oil shale in China. Based on analyzing trace elements and oil yield from boreholes samples, characteristics and paleo-sedi- mentary environments of oil shale and relationship between paleo-sedimentary environment and oil yield were studied. With favorable quality, oil yield of oil shale varies from 1.4% to 9.1%. Geochemical data indicate that the paleo-redox condition of oil shale＇s reducing condition from analyses of V/Cr, V/（V ＋ Ni）, U/Th, δU, and authi genic uranium. Equivalent Boron, Sp, and Sr/Ba illustrate that paleosalinity of oil shale is dominated by fresh water. The paleoclimate of oil shale is warm and humid by calculating the chemical index of alteration and Sr/Cu. Fe/Ti and （Fe ＋ Mn）/Ti all explain that there were hot water activities during the sedimentary period of oil shale. In terms of Zr/Rb, paleohydrodynamics of oil shale is weak. By means of Co abundance and U/Th, paleo-water-depth of oil shale is from 17.30 to 157.26 m, reflecting sedimentary environment which is mainly in semi deep-deep lake facies. Correlation analyses between oil yield and six paleoenvironmental factors show that the oil yield of oil shale is mainly controlled by paleo-redox conditions, paleoclimate, hot water activities, and depth of water.Paleosalinity and paleohydrodynamics have an inconspicuous influence on oil yield.

Oil Production Optimization by Means of a Combined“Plugging,Profile Control,and Flooding”Treatment:Analysis of Results Obtained Using Computer Tomography and Nuclear Magnetic Resonance

Due to long-term water injection,often oilfields enter the so-called medium and high water cut stage,and it is difficult to achieve good oil recovery and water reduction through standard methods(single profile control and flooding measures).Therefore,in this study,a novel method based on“plugging,profile control,and flooding”being implemented at the same time is proposed.To assess the performances of this approach,physical simulations,computer tomography,and nuclear magnetic resonance are used.The results show that the combination of a gel plugging agent,a polymer microsphere flooding agent,and a high-efficiency oil displacement agent leads to better results in terms of oil recovery with respect to the situation in which these approaches are used separately(the oil recovery is increased by 15.37%).Computer tomography scan results show that with the combined approach,a larger sweep volume and higher oil washing efficiency are obtained.The remaining oil in the cluster form can be recovered in the middle and low permeability layer,increasing the proportion of the columnar and blind end states of the oil.The nuclear magnetic resonance test results show that the combined“plugging,profile control,and flooding”treatment can also be used to control more effectively the dominant channels of the high permeability layer and further expand the recovery degree of the remaining oil in the pores of different sizes in the middle and low permeability layers.However,for the low permeability layer(permeability difference of 20),the benefits in terms of oil recovery are limited.

Technology and Practice of Stabiliing Oil Production and Controlling Water Cut in Kalamkas Oilfield in Central Asia

In this paper, by in-depth geological research of Kalamkas Oilfield in Central Asia, the geological body has been re-ascertained; combined with fine study of reservoir engineering, based on the understanding of the distribution of remaining oil horizontal wells have been given full play to stabilizing oil production and controlling water cut, reducing the producing pressure drop, improving well productivity and other advantages, and the development and deployment has been optimized; horizontal wells have been applied to solve problems such as old well casing damages, shutting down wells, low-productivity and low- efficiency wells, and high water cut wells to improve the utilization rate of old wells; through separate layer system improved injection production pattern, adjustment wells have been optimized and deployed, and part measures wells have been preferably selected to tap the residual oil improve the degree of reserves control realize the stabilization of oil production and control of water cut in an old oilfield, and further improve the development effects.

A review of methane leakage from abandoned oil and gas wells:A case study in Lubbock,Texas,within the Permian Basin

In the pursuit of global net zero carbon emissions and climate change mitigation,ongoing research into sustainable energy sources and emission control is paramount.This review examines methane leakage from abandoned oil and gas(AOG)wells,focusing particularly on Lubbock,a geographic area situated within the larger region known as the Permian Basin in West Texas,United States.The objective is to assess the extent and environmental implications of methane leakage from these wells.The analysis integrates pertinent literature,governmental and industry data,and prior Lubbock reports.Factors affecting methane leakage,including well integrity,geological characteristics,and human activities,are explored.Our research estimates 1781 drilled wells in Lubbock,forming a foundation for targeted assessments and monitoring due to historical drilling trends.The hierarchy of well statuses in Lubbock highlights the prevalence of“active oil wells,”trailed by“plugged and abandoned oil wells”and“inactive oil wells.”Methane leakage potential aligns with these well types,underscoring the importance of strategic monitoring and mitigation.The analysis notes a zenith in“drilled and completed”wells during 1980-1990.While our study's case analysis and literature review reiterate the critical significance of assessing and mitigating methane emissions from AOG wells,it's important to clarify that the research does not directly provide methane leakage data.Instead,it contextualizes the issue's magnitude and emphasizes the well type and status analysis's role in targeted mitigation efforts.In summary,our research deepens our understanding of methane leakage,aiding informed decision-making and policy formulation for environmental preservation.By clarifying well type implications and historical drilling patterns,we aim to contribute to effective strategies in mitigating methane emissions from AOG wells.

Assessment of Uinta Basin Oil and Natural Gas Well Pad Pneumatic Controller Emissions

In the fall of 2016, a field study was conducted in the Uinta Basin Utah to improve information on oil and natural gas well pad pneumatic controllers (PCs) and emission measurement methods. A total of 80 PC systems at five oil sites (supporting six wells) and three gas sites (supporting 12 wells) were surveyed, and emissions data were produced using a combination of measurements and engineering emission estimates. Ninety-six percent of the PCs surveyed were low actuation frequency intermittent vent type. The overall whole gas emission rate for the study was estimated at 0.36 scf/h with the majority of emissions occurring from three continuous vent PCs (1.1 scf/h average) and eleven (14%) malfunctioning intermittent vent PC systems (1.6 scf/h average). Oil sites employed, on average 10.3 PC systems per well compared to 1.5 for gas sites. Oil and gas sites had group average PC emission rates of 0.28 scf/h and 0.67 scf/h, respectively. This difference was due in part to differing site selection procedures used for oil and gas sites. The PC system types encountered, the engineering emissions estimate approach, and comparisons to measurements are described. Survey methods included identification of malfunctioning PC systems and emission measurements with augmented high volume sampling and installed mass flow meters, each providing a somewhat different representation of emissions that are elucidated through example cases.

Pressure control method and device innovative design for deep oil in-situ exploration and coring

Deep oil exploration coring technology cannot accurately maintain the in-situ pressure and temperature of samples, which leads to a distortion of deep oil and gas resource reserve evaluations based on conventional cores and cannot guide the development of deep oil and gas resources on Earth. The fundamental reason is the lack of temperature and pressure control in in-situ coring environments. In this paper, a pressure control method of a coring device is studied. The theory and method of deep intelligent temperature-pressure coupling control are innovatively proposed, and a multifield coupling dynamic sealing model is established. The optimal cardinality three term PID (Proportional-Integral-Differential) intelligent control algorithm of pressure system is developed. The temperature-pressure characteristic of the gas-liquid two-phase cavity is analyzed, and the pressure intelligent control is carried out based on three term PID control algorithms. An in-situ condition-preserved coring (ICP-Coring) device is developed, and an intelligent control system for the temperature and pressure of the coring device is designed and verified by experiments. The results show that the temperature-pressure coupling control system can effectively realize stable sealing under temperature-pressure fields of 140 MPa and 150 °C. The temperature-pressure coupling control method can accurately realize a constant pressure inside the coring device. The maximum working pressure is 140 MPa, and the effective pressure compensation range is 20 MPa. The numerical simulation experiment of pressure system control algorithm is carried out, and the optimal cardinality and three term coefficients are obtained. The pressure steady-state error is less than 0.01%. The method of temperature-pressure coupling control has guiding significance for coring device research, and is also the basis for temperature-pressure decoupling control in ICP-Coring.

Prioritizing and Providing Sound Pollution Control Strategies at the CPF of North Azadegan Oilfield Project

Among the harmful occupational factors,noise is the most common exposure in the oil industrial workplaces.The present study aimed to prioritize sound pollution areas in central processing facilities(CPF)of an oil field in order to provide corrective action in the studied industry and similar industries.After reviewing the issued permit to work,job description and noise dosimetry test,the evaluated areas were selected then sound pressure levels in the referenced areas investigated according to ISO 9612–2009(E)next the noise map prepared for all selected areas.For identifying the prioritized areas to implement the control measures NCPI was used.After identifying the first priority area with sound pressure levels greater than 85 dB,the frequency analysis was performed and Isosonic map was prepared by Surfer v10 and AutoCAD 2014.In the last step,in order to provide appropriate corrective action plan,the compatibility of the determined control actions with the production process was examined.The findings of this study indicates that 74%of the aforesaid area has the first priority to perform control measures in the caution zone and the remaining 26%is in the danger zone.In this study it has been demonstrated that implementing control measures for Zone 2 have first priority.The main source of the noise in this zone is fluid(Gas)flow through the piping and HP Gas Compressors.The results of this study shows that using effective factors such as exposure time,sound pressure level and number of exposed persons,can be present suitable model to prioritize noise control.