Mesozoic-Cenozoic Tectonics of the Yellow Sea and Oil-Gas Exploration

The purpose of the present study was to study the tectonics of the Yellow Sea. Although oilgas exploration has been undertaken for more than 30 years in the southern Yellow Sea, the exploration progress has achieved little. There are three tectonic periods with near N-S trending shortening and compression （260-200 Ma, 135-52 Ma and 23-0.78 Ma） and three tectonic periods with near E-W trending shortening and compression （200-135 Ma, 52--23 Ma and 0.78 Ma） at the Yellow Sea and adjacent areas during the Mesozoic and Cenozoic. The lndosinian tectonic period is the collision period between the Sino-Korean and Yangtze Plates, which formed the basic tectonic framework for the Yellow Sea area. There were strong intraplate deformations during the Yanshanian （200-135 Ma） and Sichuanian （135-52 Ma） periods with different tectonic models, which are also the main formation periods for endogenic metallic mineral deposits around the Yellow Sea. The three tectonic periods during the Cenozoic affect important influences for forming oil-gas reservoirs. The Eocene-Oligocene （52-23 Ma） is the main forming period for oil-gas sources. The Miocene-Early Pleistocene （23-0.78 Ma） was a period of favorable passage for oil-gas migration along NNE trending faults. Since the Middle Pleistocene （0.78 Ma） the NNE trending faults are closed and make good conditions for the reservation of oil-gas. The authors suggest that we pay more attention to the oil-gas exploration at the intersections between the NNE trending existing faults and Paleogene- Neogene systems in the southern Yellow Sea area.

Fluid Inclusions in the Xichang Basin and Their Applications in Oil-Gas Exploration

Fluid inclusions are commonly observed in various stages during the diagenetic evolution and the generation, migration and arcumulation of hydrocarbons in LowerPermian carbonate rocks in the Xichang Basin, providing direct physico-chemical evidencefor the process. Altogether seven stages can be recognized, i.e., the penecontemporaneous, early and mid-late diagenetic stages, the epidiagenetic stage and the eary, middleand late reburying stages. Karst and dissolution pores and structural fissures developedduring the epidiagenetic and reburying stages constitute the major reservoirs for hydrocarbon accumulation. Oil generation and migration began in the early reburying stagein Late Permian time and decloped to its climax in the middle reburying stage in theTriassic period, followed by extensive generation and migration of natural gases duringthe late stage of reburying in tbe Jurassic and later periods. The generation, migrationand accumulation of hydrocarbons are closely related to Hercynian basalt eruption andIndosinian and Yenshanian tecto-magmatism.

Application of Organic Inclusions in Offshore Oil-Gas Exploration

Studies of organic inclusions from the offshore oil and gas fields provide much information about the number of times, temperature, depth, time and phase state of oil\|gas migration, as well as about the composition of organic inclusions. On the basis of the type, character, composition and distribution of organic inclusions in the Zhu\|Ⅲ Depression at the Pearl River Mouth, information can be developed about the source rocks of oil and gas, and their evolution and migration.

Late Paleozoic reefs and their significance for tectonics and oil-gas exploration in the Hinggan-Inner Mongolia area

Many reefs of the Late Paleozoic have been discovered recently in the Hinggan-lnner Mongolia area. These reefs clearly are geographically extensive, and possess distinctive features and well-developed reef-facies. They have been found to contain five reef-building communities and were constructed in four periods. Colonial coral-algal reefs at Aohan and Chifeng represent a warm shallow-sea in the Carboniferous. Different reefs in the Xiwu Banner were formed in three periods： early Late Carboniferous, late Late Carboniferous and Early Permian. These reefs were built in warm sea conditions. Their buildup types include colonial coral frameworks, algae-buildings and lime-mud mounds. Bryozoan reefs in the Zhalaite and Dongwu banners were built in the late Middle Permian and thrived in a cold shallow-sea. All reefs grew independently on two kinds of sedimentary platforms, carbonate and carbonate-clastic mixed platforms. Four reef-forming periods occurred later from south to north, along a collisional course between the North China Plate and the Siberian Plate. These reefs can be arranged into three ＇reef-links＇ or reef zones that extend along plate margins. Among these, the Aohan-Chifeng reef-link indicates a northern margin of the North China Plate, the Zhalaite-Dongwu reef-link marks a southern margin of the Siberian Plate, and the Xiwu-Beishan reef-link reflects the former existence of some inter-plates. The strata of each reef-facies are thick and contain rich asphalt deposits. Overlapping and heteropic layers are very thick and contain dark oil/gas-rich horizons; TOC analyses verify that most of these are good hydrocarbon source rocks. This study shows that the study area is an excellent candidate for oil-gas exploration.

Geological characteristics and exploration breakthroughs of coal rock gas in Carboniferous Benxi Formation,Ordos Basin,NW China

To explore the geological characteristics and exploration potential of the Carboniferous Benxi Formation coal rock gas in the Ordos Basin,this paper presents a systematic research on the coal rock distribution,coal rock reservoirs,coal rock quality,and coal rock gas features,resources and enrichment.Coal rock gas is a high-quality resource distinct from coalbed methane,and it has unique features in terms of burial depth,gas source,reservoir,gas content,and carbon isotopic composition.The Benxi Formation coal rocks cover an area of 16×104km^(2),with thicknesses ranging from 2 m to 25 m,primarily consisting of bright and semi-bright coals with primitive structures and low volatile and ash contents,indicating a good coal quality.The medium-to-high rank coal rocks have the total organic carbon(TOC)content ranging from 33.49%to 86.11%,averaging75.16%.They have a high degree of thermal evolution(Roof 1.2%-2.8%),and a high gas-generating capacity.They also have high stable carbon isotopic values(δ13C1of-37.6‰to-16‰;δ13C2of-21.7‰to-14.3‰).Deep coal rocks develop matrix pores such as gas bubble pores,organic pores,and inorganic mineral pores,which,together with cleats and fractures,form good reservoir spaces.The coal rock reservoirs exhibit the porosity of 0.54%-10.67%(averaging 5.42%)and the permeability of(0.001-14.600)×10^(-3)μm^(2)(averaging 2.32×10^(-3)μm^(2)).Vertically,there are five types of coal rock gas accumulation and dissipation combinations,among which the coal rock-mudstone gas accumulation combination and the coal rock-limestone gas accumulation combination are the most important,with good sealing conditions and high peak values of total hydrocarbon in gas logging.A model of coal rock gas accumulation has been constructed,which includes widespread distribution of medium-to-high rank coal rocks continually generating gas,matrix pores and cleats/fractures in coal rocks acting as large-scale reservoir spaces,tight cap rocks providing sealing,source-reservoir integration,and five types of efficient enrichment patterns(lateral pinchout complex,lenses,low-amplitude structures,nose-like structures,and lithologically self-sealing).According to the geological characteristics of coal rock gas,the Benxi Formation is divided into 8 plays,and the estimated coal rock gas resources with a buried depth of more than 2000 m are more than 12.33×10^(12)m^(3).The above understandings guide the deployment of risk exploration.Two wells drilled accordingly obtained an industrial gas flow,driving the further deployment of exploratory and appraisal wells.Substantial breakthroughs have been achieved,with the possible reserves over a trillion cubic meters and the proved reserves over a hundred billion cubic meters,which is of great significance for the reserves increase and efficient development of natural gas in China.

Natural gas exploration potential and favorable targets of Permian Fengcheng Formation in the western Central Depression of Junggar Basin,NW China

Based on the organic geochemical data and the molecular and stable carbon isotopic compositions of natural gas of the Lower Permian Fengcheng Formation in the western Central Depression of Junggar Basin,combined with sedimentary environment analysis and hydrocarbon-generating simulation,the gas-generating potential of the Fengcheng source rock is evaluated,the distribution of large-scale effective source kitchen is described,the genetic types of natural gas are clarified,and four types of favorable exploration targets are selected.The results show that:(1)The Fengcheng Formation is a set of oil-prone source rocks,and the retained liquid hydrocarbon is conducive to late cracking into gas,with characteristics of high gas-generating potential and late accumulation;(2)The maximum thickness of Fengcheng source rock reaches 900 m.The source rock has entered the main gas-generating stage in Penyijingxi and Shawan sags,and the area with gas-generating intensity greater than 20×10^(8) m^(3)/km^(2) is approximately 6500 km^(2).(3)Around the western Central Depression,highly mature oil-type gas with light carbon isotope composition was identified to be derived from the Fengcheng source rocks mainly,while the rest was coal-derived gas from the Carboniferous source rock;(4)Four types of favorable exploration targets with exploration potential were developed in the western Central Depression which are structural traps neighboring to the source,stratigraphic traps neighboring to the source,shale-gas type within the source,and structural traps within the source.Great attention should be paid to these targets.

Notes for the 50th Anniversary Special Issue of Petroleum Exploration and Development

The year of 2024 marks the 50th anniversary of the publication of Petroleum Exploration and Development.For half a century,Petroleum Exploration and Development has been committed to disseminating petroleum technology,witnessing and recording the glorious journey of China's petroleum industry from being weak to becoming strong.The journal has also become a bright banner in China's petroleum technology industry.

New Data on Coal, Gypsum, Iron and Silica Sand Deposits and Geochemical Exploration (Pakistan): Revision of 25 Years History of Dinosaur Discoveries from Pakistan

Discoveries of many coal seams at depths by drilling carried by Geological Survey of Pakistan in Sor Range and Harnai Gochina, extended the coal seams at depth which is challenge for mine owners to exploit feasibly. Bed to bed gypsum samplings (and their chemical analyses) of huge gypsum deposits from Sulaiman foldbelt is a base for industrialist and also planers to develop cement and gypsum industries to increase export and foreign exchange for the development of area and Pakistan. Low and high grade sedimentary iron deposits, silica sand and uranium host rocks and their extensions in Sulaiman and Kirthar foldbelts are presented. Anomalies of a few base metals arise as a result of geochemical exploration carried at part of Loralai District of Balochistan. Theropod dinosaurs were frequent in India, while Poripuchian titanosaurs (Sauropoda, Dinosauria) were frequent in Pakistan. Besides some ichnotaxa, many bone taxa such as 1 titanosauriform, 14 titanosaurian sauropod (including one new titanosaur), and 3 theropod dinosaurs are established from Pakistan. Among these 12 titanosaur species and 3 theropod species are named in about 10 km2 area of Vitakri dome and 2 titanosaur species are named in about a few hundred square meter area of Mari Bohri (Kachi Bohri) which is about 10 km westward from Vitakri dome. Pakistan is a unique country which discoverd 14 diversified titanosaurs in a short area and also in a short period (67 - 66 million years ago/Ma). About 400 bones found from a few meter thick upper part of upper shale horizon of latest Maastrichtian Vitakri Formation which is base for titanosaur taxa. Cranial material is in low fraction (but include significant diverse snouts), caudal vertebrae are prominent, the cervicals, dorsals and sacrals have significant numbers, forelimb and hind limb bones have balanced fraction. Humeri, femora and tibiae are most common. To know the position of Pakistani titanosaurs among titanosaurs and sauropods, there is a need to extend list of characters for phylogenetic analyses. This broad feature list should include main characters of titanosaurs from Pakistan and also from global world.

Cu-Zn isotope compositions of hydrothermal sediments from the southern Mid-Atlantic Ridge:implications to the sediment formation and mineral exploration

Six hydrothermal sediment samples were collected from the Xunmei and Tongguan hydrothermal fields along the southern Mid-Atlantic Ridge during the China Ocean Cruise DY46 in 2017.Sulfides and oxides in the samples were separated,and Cu and Zn isotope compositions were analyzed.Results show that the ranges ofδ^(65)Cu values of the bulk sediments,sulfides,and oxides were 0.36‰-2.46‰,-0.21‰-1.10‰,and 0.68‰-1.52‰,respectively.Theδ^(65)Cu values of sulfides in four samples(46II-14,46II-30,46III-06,and 46II-09)were relatively low(-0.21‰-0.50‰),corresponding to theδ^(65)Cu values of sulfides from inactive old hydrothermal chimneys in northern Mid-Atlantic Ridge(n MAR),suggesting that the sulfides in the sediments were originated from collapsed dead chimney mainly.While theδ^(65)Cu values of the other two samples(46III-02 and 46III-08)were relatively high(1.10‰-0.96‰),corresponding to theδ^(65)Cu values for active hydrothermal chimneys sulfides in n MAR,which indicated that the sulfides in these two samples might mainly come from sulfide particles settled from active hydrothermal plume.Because of the high density of sulfide particles,they tended to settle near the hydrothermal vents first.Therefore,highδ^(65)Cu values of sulfides in 46III-02 and 46III-08 implied that undiscovered active hydrothermal vents near the sampling positions of 46III-02 in the Xunmei hydrothermal field and 46III-08 in the Tongguan hydrothermal field.Theδ^(66)Zn values of hydrothermal sediments and sulfides ranged 0.11‰-0.43‰and 0.29‰-0.67‰,respectively.In the four samples from the Xunmei hydrothermal field,a positive correlation was found between the distance of the sampling position from sulfide mineralized spot and the Zn isotopic ratio,showing that the greater the distance from the mineralized spot,the heavier the Zn isotope composition as seen in two samples(46II-30 and 46II-14)of the Xunmei-3 spot.This result aligned with the findings of Wilkinson et al.(2005)and Baumgartner et al.(2023),suggesting that the lower the Zn isotope composition,the closer it is to the hydrothermal vent.However,in the Xunmei hydrothermal field,the Zn isotope composition in the other two samples(46III-02and 46III-06)showed the opposite trend.This indicated that there might be an active hydrothermal vent near the sampling location of sample 46III-02.This observation aligned with the Cu isotope analysis results.This study showed that Cu-Zn isotopes are good indicators for understanding the formation mechanisms of hydrothermal sediments and for locating active hydrothermal vents.

Review of Artificial Intelligence for Oil and Gas Exploration: Convolutional Neural Network Approaches and the U-Net 3D Model

Deep learning, especially through convolutional neural networks (CNN) such as the U-Net 3D model, has revolutionized fault identification from seismic data, representing a significant leap over traditional methods. Our review traces the evolution of CNN, emphasizing the adaptation and capabilities of the U-Net 3D model in automating seismic fault delineation with unprecedented accuracy. We find: 1) The transition from basic neural networks to sophisticated CNN has enabled remarkable advancements in image recognition, which are directly applicable to analyzing seismic data. The U-Net 3D model, with its innovative architecture, exemplifies this progress by providing a method for detailed and accurate fault detection with reduced manual interpretation bias. 2) The U-Net 3D model has demonstrated its superiority over traditional fault identification methods in several key areas: it has enhanced interpretation accuracy, increased operational efficiency, and reduced the subjectivity of manual methods. 3) Despite these achievements, challenges such as the need for effective data preprocessing, acquisition of high-quality annotated datasets, and achieving model generalization across different geological conditions remain. Future research should therefore focus on developing more complex network architectures and innovative training strategies to refine fault identification performance further. Our findings confirm the transformative potential of deep learning, particularly CNN like the U-Net 3D model, in geosciences, advocating for its broader integration to revolutionize geological exploration and seismic analysis.

Characteristics and close-range exploration methods of near- Earth asteroid 2016HO_(3)

The characteristics of asteroids are vital parameters for planning asteroid exploration missions.These characteristics have been explored in close range for some typical asteroids,and are summarized in the article.This allows estimates of the characteristics of asteroid 2016HO_(3),the target of the first Chinese asteroid exploration mission,Tianwen 2.We obtain 80 characteristic parameters in 9 categories and analyze their impacts on the mission.By comparing three close-range exploration modes,we provide advantages and disadvantages of each,and propose suitable methods for the exploration of 2016HO_(3).Owing to the weak gravity and small size of 2016HO_(3),a combination of multiple hovering positions and active orbiting is recommended for scientific exploration.

Depositional model of the Member Deng-2 marginal microbial mound-bank complex of the Dengying Formation in the southwestern Sichuan Basin, SW China: Implications for the Ediacaran microbial mound construction and hydrocarbon exploration

Recent advances in hydrocarbon exploration have been made in the Member Deng-2 marginal microbial mound-bank complex reservoirs of the Dengying Formation in the western Sichuan Basin, SW China,where the depositional process is regarded confusing. The microfacies, construction types, and depositional model of the Member Deng-2 marginal microbial mound-bank complex have been investigated using unmanned aerial vehicle photography, outcrop section investigation, thin section identification,and seismic reflections in the southwestern Sichuan Basin. The microbialite lithologic textures in this region include thrombolite, dendrolite, stromatolite, fenestral stromatolite, spongiostromata stone,oncolite, aggregated grainstone, and botryoidal grapestone. Based on the comprehensive analysis of“depositional fabrics-lithology-microfacies”, an association between a fore mound, mound framework,and back mound subfacies has been proposed based on water depth, current direction, energy level and lithologic assemblages. The microfacies of the mound base, mound core, mound flank, mound cap, and mound flat could be recognized among the mound framework subfacies. Two construction types of marginal microbial mound-bank complex have been determined based on deposition location, mound scale, migration direction, and sedimentary facies association. Type Jinkouhe microbial mound constructions(TJMMCs) develop along the windward margin owing to their proximity to the seaward subfacies fore mound, with a northeastwardly migrated microbial mound on top of the mud mound,exhibiting the characteristics of large-sized mounds and small-sized banks in the surrounding area. Type E'bian microbial mound constructions(TEMMCs) primarily occur on the leeward margin, resulting from the presence of onshore back mound subfacies, with the smaller southwestward migrated microbial mounds existing on a thicker microbial flat. The platform margin microbial mound depositional model can be correlated with certain lateral comparison profile and seismic reflection structures in the 2D seismic section, which can provide references for future worldwide exploration. Microbial mounds with larger buildups and thicker vertical reservoirs are typically targeted on the windward margin, while small-sized microbial mounds and flats with better lateral connections are typically focused on the leeward margin.

On electro-acoustic characteristics of a marine broadband sparker for seismic exploration

The construction of major marine infrastructure projects and the exploration and development of deep-sea mineral resources require fine imaging of seabed strata and structures.The highresolution marine seismic exploration based on a high broadband sparker source is an important approach to reveal seabed stratum and reservoir structure,and identify geohazard.To optimize the performance of sparker seismic source,we investigated the electro-acoustic characteristics of spark discharge under conditions of different charging voltages and electrode numbers.Results show that the sound source level increased with the increase of the charging voltage,whereas the main frequency decreased when the charging voltage increases.In addition,it was found that the charging capacitance had more obvious influence on the main frequency than the sound source level did.Although the load energy decreased with increasing electrode number,the sound source level still increased but the main frequency decreased.Meanwhile,the primary to bubble(P/B)ratio increased with the increase of the electrode number.To gain a deeper insight into the electro-acoustic characteristics,we investigate the relationship between sound source level and power peak,from which a good correlation was observed.A more practical statistical analysis on the rise rate of current was processed,and a perfect logarithmic function was derived.Furthermore,we found that the main frequency was most possibly subjected to the electrical energy,especially the charging energy per electrode.The results indicate that the charging energy per electrode less than 10 J could increase the main frequency to above 300 Hz.At last,the main frequency could be reduced to 20 Hz when the charging energy of a single-electrode discharge was enhanced to over 4 kJ.This study shall be helpful in developing a sparker seismic source and improving the performance for marine engineering exploration and geohazard assessment.

Petroleum exploration and production in Brazil:From onshore to ultra-deepwaters

The Santos Basin in Brazil has witnessed significant oil and gas discoveries in deepwater pre-salt since the 21^(st)century.Currently,the waters in eastern Brazil stand out as a hot area of deepwater exploration and production worldwide.Based on a review of the petroleum exploration and production history in Brazil,the challenges,researches and practices,strategic transformation,significant breakthroughs,and key theories and technologies for exploration from onshore to offshore and from shallow waters to deep-ultra-deep waters and then to pre-salt strata are systematically elaborated.Within 15 years since its establishment in 1953,Petrobras explored onshore Paleozoic cratonic and marginal rift basins,and obtained some small to medium petroleum discoveries in fault-block traps.In the 1970s,Petrobras developed seismic exploration technologies and several hydrocarbon accumulation models,for example,turbidite sandstones,allowing important discoveries in shallow waters,e.g.the Namorado Field and Enchova fields.Guided by these models/technologies,significant discoveries,e.g.the Marlim and Roncador fields,were made in deepwater post-salt in the Campos Basin.In the early 21^(st)century,the advancements in theories and technologies for pre-salt petroleum system,carbonate reservoirs,hydrocarbon accumulation and nuclear magnetic resonance(NMR)logging stimulated a succession of valuable discoveries in the Lower Cretaceous lacustrine carbonates in the Santos Basin,including the world-class ultra-deepwater super giant fields such as Tupi(Lula),Mero and Buzios.Petroleum development in complex deep water environments is extremely challenging.By establishing the Technological Capacitation Program in Deep Waters(PROCAP),Petrobras developed and implemented key technologies including managed pressure drilling(MPD)with narrow pressure window,pressurized mud cap drilling(PMCD),multi-stage intelligent completion,development with Floating Production Storage and Offloading units(FPSO),and flow assurance,which remarkably improved the drilling,completion,field development and transportation efficiency and safety.Additionally,under the limited FPSO capacity,Petrobras promoted the world-largest CCUS-EOR project,which contributed effectively to the reduction of greenhouse gas emissions and the enhancement of oil recovery.Development and application of these technologies provide valuable reference for deep and ultra-deepwater petroleum exploration and production worldwide.The petroleum exploration in Brazil will consistently focus on ultra-deep water pre-salt carbonates and post-salt turbidites,and seek new opportunities in Paleozoic gas.Technical innovation and strategic cooperation will be held to promote the sustainable development of Brazil's oil and gas industry.

Laboratory or Department?Exploration and Creation in Computer Science and Technology

In the very beginning,the Computer Laboratory of the University of Cambridge was founded to provide computing service for different disciplines across the university.As computer science developed as a discipline in its own right,boundaries necessarily arose between it and other disciplines,in a way that is now often detrimental to progress.Therefore,it is necessary to reinvigorate the relationship between computer science and other academic disciplines and celebrate exploration and creativity in research.To do this,the structures of the academic department have to act as supporting scaffolding rather than barriers.Some examples are given that show the efforts being made at the University of Cambridge to approach this problem.

Accurate Source-Receiver Positioning Method for a High-Resolution Deep-Towed Multichannel Seismic Exploration System

The near-seabed multichannel seismic exploration systems have yielded remarkable successes in marine geological disaster assessment,marine gas hydrate investigation,and deep-sea mineral exploration owing to their high vertical and horizontal resolution.However,the quality of deep-towed seismic imaging hinges on accurate source-receiver positioning information.In light of existing technical problems,we propose a novel array geometry inversion method tailored for high-resolution deep-towed multichannel seismic exploration systems.This method is independent of the attitude and depth sensors along a deep-towed seismic streamer,accounting for variations in seawater velocity and seabed slope angle.Our approach decomposes the towed line array into multiline segments and characterizes its geometric shape using the line segment distance and pitch angle.Introducing optimization parameters for seawater velocity and seabed slope angle,we establish an objective function based on the model,yielding results that align with objective reality.Employing the particle swarm optimization algorithm enables synchronous acquisition of optimized inversion results for array geometry and seawater velocity.Experimental validation using theoretical models and practical data verifies that our approach effectively enhances source and receiver positioning inversion accuracy.The algorithm exhibits robust stability and reliability,addressing uncertainties in seismic traveltime picking and complex seabed topography conditions.

Exploration of Operation and Maintenance Management Mode and Innovation Mechanism of Pilot Base of Chemical Park

Based on the current situation of the operation and maintenance management of the pilot base in many chemical parks in China,this paper conducts an in-depth exploration of the operation and maintenance management and innovation mode of the pilot base from the aspects of the evaluation of the pilot project entering the park,safety and environmental protection supervision,pilot mode,and industrialization mode of the pilot test results,so as to provide solutions for accelerating the process and industrialization of the pilot project and realizing the innovation value of the pilot base.

Applications of artificial intelligence in geothermal resource exploration: A review

Artificial intelligence (AI) has become increasingly important in geothermal exploration,significantly improving the efficiency of resource identification.This review examines current AI applications,focusing on the algorithms used,the challenges addressed,and the opportunities created.In addition,the review highlights the growth of machine learning applications in geothermal exploration over the past decade,demonstrating how AI has improved the analysis of subsurface data to identify potential resources.AI techniques such as neural networks,support vector machines,and decision trees are used to estimate subsurface temperatures,predict rock and fluid properties,and identify optimal drilling locations.In particular,neural networks are the most widely used technique,further contributing to improved exploration efficiency.However,the widespread adoption of AI in geothermal exploration is hindered by challenges,such as data accessibility,data quality,and the need for tailored data science training for industry professionals.Furthermore,the review emphasizes the importance of data engineering methodologies,data scaling,and standardization to enable the development of accurate and generalizable AI models for geothermal exploration.It is concluded that the integration of AI into geothermal exploration holds great promise for accelerating the development of geothermal energy resources.By effectively addressing key challenges and leveraging AI technologies,the geothermal industry can unlock cost‐effective and sustainable power generation opportunities.

Laparoscopic cholecystectomy plus common bile duct exploration for extrahepatic bile duct stones and postoperative recurrenceassociated risk factors

BACKGROUND There remain controversies regarding the surgical treatment of extrahepatic bile duct stones(EHBDSs)in clinical practice.AIM To explore the curative effect of laparoscopic cholecystectomy(LC)plus common bile duct exploration(CBDE)for the surgical treatment of EHBDSs and to analyze the risk factors that affect postoperative stone recurrence.METHODS Eighty-two patients with EHBDSs admitted between March 2017 and March 2023 were selected.Among them,patients treated with open choledocholithotomy plus LC or open cholecystectomy(OC)were set as the control group(n=40),and those treated with LC plus CBDE served as the observation group(n=42).The surgical outcomes of the two groups were compared,the surgical complications and Gas-trointestinal Quality of Life Index(GIQLI)scores were counted,and the one-year prognostic recurrence was recorded.Independent factors for postoperative re-currence were determined using univariate and multivariate analyses.RESULTS The two groups were comparable in the stone residual rate(P>0.05).The ope-ration time(P<0.05),intraoperative bleeding(P<0.05),and total complication rate(P=0.005)were lower in the observation group than in the control group.The observation group exhibited a marked increase in the GIQLI score,which was higher than the control group(P<0.05).A lower one-year recurrence rate was determined in the observation group vs the control group(P=0.027).Sphincter of Oddi dysfunction[odds ratio(OR)=5.712,P=0.007]and the treatment scheme of open choledocholithotomy plus LC or OC(OR=6.771,P=0.008)were the independent risk factors for one-year recurrence in patients after surgery.CONCLUSION LC plus CBDE for patients with EHBDSs can reduce stone residuals,intraoperative bleeding,complications,and postoperative recurrence.

Application of integrated geophysical techniques in geothermal exploration in Binhai County, Jiangsu Province

Integrated geophysical technology is a necessary and effective means for geothermal exploration.However,integration of geophysical technology for large‐scale surveys with those for geothermal reservoir localization is still in development.This study used the controlled source audio‐frequency magnetotelluric method technology for large‐scale exploration to obtain underground electrical structure information and micromotion detection technology to obtain underground wave velocity structure information.The combination of two detection technologies was used for local identification of geothermal reservoirs.Further,auxiliary correction and inversion constraint were implemented through the audio magnetotelluric sounding technology for maximum authenticity restoration of the near‐and transition‐field data.Through these technology improvements,a geothermal geological model was established for the Binhai County of Jiangsu Province in China and potential geothermal well locations were identified.On this basis,a geothermal well was drilled nearly 3000m deep,with a daily water volume of over 2000m3/day and a geothermal water temperature of 51°C at the well head.It is found that predictions using the above integrated geophysical exploration technology are in good agreement with the well geological formation data.This integrated geophysical technology can be effectively applied for geothermal exploration with high precision and reliability.