H-steel all-bolted connection steel frame structures with heat preservation and decoration composite wall boards were investigated and the seismic performances of three scaled specimens were studied.The failure modes,...H-steel all-bolted connection steel frame structures with heat preservation and decoration composite wall boards were investigated and the seismic performances of three scaled specimens were studied.The failure modes,hysteresis curves,bearing capacity,ductility,energy dissipation capacity,stiffness degradation and strain distribution were discussed.The calculation method of structural theoretical internal force was presented.The results showed that the overall structural seismic performance was better,and the structural ductility met the demands of elastic-plastic inter-story drift angle for seismic design.The H-steel weak-axis connection structure obtained better energy dissipation capacity,and its bearing capacity and stiffness were slightly different from the strong-axis connection.The heat preservation and decoration performance of composite wallboard and the all-bolted connection of the steel frame realized prefabrication during the whole construction period.The plastic hinge of the steel beam can be moved outwards because of the L-angles,which effectively avoids stress concentration in joint areas and expands the plastic hinge range.The errors between the theoretical structural capacity calculated by the plastic analysis method and the test results were within 2.44%.In addition,structural failure mechanisms and bearing capacities were verified by the finite element(FE)analysis,and the effects of the main parameters on the structures were investigated.The FE verification results were the same as in the test.The research results provide theoretical support and technical guidance for the application of thermal insulation and decorative composite wall panels in H-shaped steel all-bolted steel frames.展开更多
Oxygen-enriched top-blown smelting is a promising technology for processing waste printed circuit boards(WPCBs).The distribution behavior of valuable elements in WPCBs during smelting was investigated by varying the o...Oxygen-enriched top-blown smelting is a promising technology for processing waste printed circuit boards(WPCBs).The distribution behavior of valuable elements in WPCBs during smelting was investigated by varying the oxygen-enriched concentration,oxygen volume,CaO/SiO_(2)(mass ratio),and Fe/SiO_(2)(mass ratio).The optimal operating conditions were obtained by implementing a one-factor-at-a-time method.X-ray diffractometer,scanning electron microscopy−energy dispersive spectrometer,and inductive coupled plasma-atomic emission spectroscopy methods were utilized to detect the chemical composition,occurrence state as well as elemental contents of alloy and slag.It is found that the elements of Cu,Sn and Ni are mainly accumulated in the alloy while Fe is mainly oxidized into the slag.The direct yields of Cu,Sn and Ni are 90.18%,85.32%and 81.10%under the optimal conditions of temperature 1250℃,oxygen-enriched concentration 30%,oxygen volume 24 L,CaO/SiO_(2) mass ratio 0.55,and Fe/SiO_(2) mass ratio 1.05.The results show that the valuable metals are mainly lost in the slag through mechanical entrainment.展开更多
Through exploring the effects of low pH on the composite system of desulfurization gypsum(DG)enhanced by melamine-formaldehyde resin(MF),it is found that the inducing of sulfate-ion,in contrast to chloride and oxalate...Through exploring the effects of low pH on the composite system of desulfurization gypsum(DG)enhanced by melamine-formaldehyde resin(MF),it is found that the inducing of sulfate-ion,in contrast to chloride and oxalate ions,favors the longitudinal growth of the crystalline form of the hydration product,which was relatively simple and had the highest length to width(L/D)ratio.At the same time,MF can also improve L/D ratio of gypsum hydration products,which favors the formation of hydrated whiskers.Finally,in a composite system composed of hemihydrate gypsum,MF,and glass fibers,when dilute sulfuric acid was used to regulate pH=3-4,the tight binding formed among the components of the composite system compared to pH=5-6.The hydration product of gypsum adheres tightly to glass fiber surface and produces a good cross-linking and binding effect with MF.The flexural strength,compressive strength,elastic modulus,and water absorption of the desulphurized gypsum composite board is 22.7 MPa,39.8 MPa,5608 MPa,and 1.8%,respectively.展开更多
The Milan Gobi area of the Golmud-Korla Railway in northwest China is located in the lower dispersal area of the mountain pass and has strong winds with evident double wind direction characteristics.This study introdu...The Milan Gobi area of the Golmud-Korla Railway in northwest China is located in the lower dispersal area of the mountain pass and has strong winds with evident double wind direction characteristics.This study introduced a novel sand fence deployment technique,termed‘folded linear deployment',designed to position the sand fence orthogonally to the two predominant wind directions for optimal protection.This study used wind tunnel and field tests to evaluate the wind and sand flow characteristics,as well as the windproof and sandresistant performance of folded linear HDPE(Highdensity polyethylene)board sand fences.The results suggest that the airflow around the fence creates clear zoning characteristics.The deceleration area on the BSF(backwind side of the sand fence)is much larger than that on the DSF(downwind side of the sand fence).Thus,sand particles are primarily deposited on the BSF.At different wind speeds,the airflow at 2 and 5 h on the DSF is not disturbed.The WSP(wind speed profile)presents a logarithmic distribution.The airflow is disturbed at 1-20 h on the BSF,and the WSP gradually deviates from the logarithmic law.However,as the airflow moves away from the fence,the WSP gradually approaches a logarithmic distribution.Meanwhile,the WPE(windproof efficiency)and SRE(sand-resistant efficiency)of the sand fence exceed 80%.In addition,the results of wind tunnel tests are compared with those of field tests.The overall dispersion is good,and the best dispersion is found at z/H=2.00,indicating good agreement between the two test results.This study provides a scientific basis for the design of sand hazard control measures,similar to the railway project in the Gobi Gale area.展开更多
In this article,a single-board integrated millimeter-wave(mm-Wave)asymmetric full-digital beamforming(AFDBF)array is developed for beyond-fifth-generation(B5G)and sixth-generation(6G)communications.The proposed integr...In this article,a single-board integrated millimeter-wave(mm-Wave)asymmetric full-digital beamforming(AFDBF)array is developed for beyond-fifth-generation(B5G)and sixth-generation(6G)communications.The proposed integrated array effectively addresses the challenge of arranging a large number of ports in a full-digital array by designing vertical connections in a three-dimensional space and successfully integrating full-digital transmitting(Tx)and receiving(Rx)arrays independently in a single board.Unlike the traditional symmetric array,the proposed asymmetric array is composed of an 8×8 Tx array arranged in a square shape and an 8+8 Rx array arranged in an L shape.The center-to-center distance between two adjacent elements is 0.54k0 for both the Tx and Rx arrays,where k0 is the free-space wavelength at 27 GHz.The proposed AFDBF array possesses a more compact structure and lower system hardware cost and power consumption compared with conventional brick-type full-digital arrays.In addition,the energy efficiency of the proposed AFDBF array outperforms that of a hybrid beamforming array.The measurement results indicate that the operating frequency band of the proposed array is 24.25–29.50 GHz.An eight-element linear array within the Tx array can achieve a scanning angle ranging from-47°to+47°in both the azimuth and the elevation planes,and the measured scanning range of each eight-element Rx array is–45°to+45°.The measured maximum effective isotropic radiated power(EIRP)of the eight-element Tx array is 43.2 dBm at 28.0 GHz(considering the saturation point).Furthermore,the measured error vector magnitude(EVM)is less than 3%when 64-quadrature amplitude modulation(QAM)waveforms are used.展开更多
背景:目前运动疗法是非药物治疗腰痛的有效方法,运动疗法可通过骨骼和肌肉之间的机械-化学偶联维持腰椎的稳定,但目前尚无关于运动疗法通过机械-化学偶联缓解慢性非特异性下背痛之间研究进展及最佳治疗方案的明确阐述。目的:综述运动疗...背景:目前运动疗法是非药物治疗腰痛的有效方法,运动疗法可通过骨骼和肌肉之间的机械-化学偶联维持腰椎的稳定,但目前尚无关于运动疗法通过机械-化学偶联缓解慢性非特异性下背痛之间研究进展及最佳治疗方案的明确阐述。目的:综述运动疗法时椎旁肌通过机械-化学偶联影响腰椎稳定性进而缓解慢性非特异性下背痛的相关研究进展,以及目前运动疗法治疗慢性非特异性下背痛的最佳方案。方法:在万方数据库、中国知网、维普、Web of Science和PubMed数据库进行文献检索,以“慢性非特异性下背痛,腰椎稳定,椎旁肌,运动疗法”为中文检索词,以“chronic nonspecific low back pain,lumbar stabilization,paravertebral muscle,exercise therapy”为英文检索词,检索各数据库建库至2024年1月发表的相关文献,最终纳入93篇文献进行归纳总结。结果与结论:运动疗法可以通过适当的机械刺激作用于椎旁肌和骨骼并使其产生相应的变化。运动疗法主要通过机械-化学偶联方式来提高椎旁肌的质量,进而维持腰椎稳定,从而更好地缓解慢性非特异性下背痛,是慢性非特异性下背痛的重要干预措施。但是,对于运动疗法通过腰椎稳定来治疗慢性非特异性下背痛的确切有效方案尚无明确报道。个体化运动方案的制定对于慢性非特异性下背痛的治疗和预后尤为重要。同一个体的肌肉质量与骨骼质量是密切相关的,影像学评估椎旁肌的质量和体积对于疾病的发现和干预具有重要意义。展开更多
文摘H-steel all-bolted connection steel frame structures with heat preservation and decoration composite wall boards were investigated and the seismic performances of three scaled specimens were studied.The failure modes,hysteresis curves,bearing capacity,ductility,energy dissipation capacity,stiffness degradation and strain distribution were discussed.The calculation method of structural theoretical internal force was presented.The results showed that the overall structural seismic performance was better,and the structural ductility met the demands of elastic-plastic inter-story drift angle for seismic design.The H-steel weak-axis connection structure obtained better energy dissipation capacity,and its bearing capacity and stiffness were slightly different from the strong-axis connection.The heat preservation and decoration performance of composite wallboard and the all-bolted connection of the steel frame realized prefabrication during the whole construction period.The plastic hinge of the steel beam can be moved outwards because of the L-angles,which effectively avoids stress concentration in joint areas and expands the plastic hinge range.The errors between the theoretical structural capacity calculated by the plastic analysis method and the test results were within 2.44%.In addition,structural failure mechanisms and bearing capacities were verified by the finite element(FE)analysis,and the effects of the main parameters on the structures were investigated.The FE verification results were the same as in the test.The research results provide theoretical support and technical guidance for the application of thermal insulation and decorative composite wall panels in H-shaped steel all-bolted steel frames.
基金supported by the National Key R&D Program of China (No.2022YFC2904201)the National Natural Science Foundation of China (Nos.51904124,52004111)+4 种基金Jiangxi Provincial Natural Science Foundation,China (Nos.20224BAB214040,20232BAB204036)the Program of Qingjiang Excellent Young Talents,Jiangxi University of Science and Technology,China (No.JXUSTQJYX2020012)Jiangxi Provincial Cultivation Program for Academic and Technical Leaders of Major Subjects,China (Nos.20212BCJL23052,20212BCJ23006,20212BCJ23007)Double Thousand Plan in Jiangxi Province,China (No.jxsq2019201040)Key Project of Jiangxi Provincial Natural Science Foundation,China (No.20212ACB204015)。
文摘Oxygen-enriched top-blown smelting is a promising technology for processing waste printed circuit boards(WPCBs).The distribution behavior of valuable elements in WPCBs during smelting was investigated by varying the oxygen-enriched concentration,oxygen volume,CaO/SiO_(2)(mass ratio),and Fe/SiO_(2)(mass ratio).The optimal operating conditions were obtained by implementing a one-factor-at-a-time method.X-ray diffractometer,scanning electron microscopy−energy dispersive spectrometer,and inductive coupled plasma-atomic emission spectroscopy methods were utilized to detect the chemical composition,occurrence state as well as elemental contents of alloy and slag.It is found that the elements of Cu,Sn and Ni are mainly accumulated in the alloy while Fe is mainly oxidized into the slag.The direct yields of Cu,Sn and Ni are 90.18%,85.32%and 81.10%under the optimal conditions of temperature 1250℃,oxygen-enriched concentration 30%,oxygen volume 24 L,CaO/SiO_(2) mass ratio 0.55,and Fe/SiO_(2) mass ratio 1.05.The results show that the valuable metals are mainly lost in the slag through mechanical entrainment.
文摘Through exploring the effects of low pH on the composite system of desulfurization gypsum(DG)enhanced by melamine-formaldehyde resin(MF),it is found that the inducing of sulfate-ion,in contrast to chloride and oxalate ions,favors the longitudinal growth of the crystalline form of the hydration product,which was relatively simple and had the highest length to width(L/D)ratio.At the same time,MF can also improve L/D ratio of gypsum hydration products,which favors the formation of hydrated whiskers.Finally,in a composite system composed of hemihydrate gypsum,MF,and glass fibers,when dilute sulfuric acid was used to regulate pH=3-4,the tight binding formed among the components of the composite system compared to pH=5-6.The hydration product of gypsum adheres tightly to glass fiber surface and produces a good cross-linking and binding effect with MF.The flexural strength,compressive strength,elastic modulus,and water absorption of the desulphurized gypsum composite board is 22.7 MPa,39.8 MPa,5608 MPa,and 1.8%,respectively.
基金financially supported by the Chang Jiang Scholar and Innovation Team Development Plan of China(IRT_15R29)the Basic Research Innovation Group Project of Gansu Province,China(21JR7RA347)the Natural Science Foundation of Gansu Province,China(20JR10RA231)。
文摘The Milan Gobi area of the Golmud-Korla Railway in northwest China is located in the lower dispersal area of the mountain pass and has strong winds with evident double wind direction characteristics.This study introduced a novel sand fence deployment technique,termed‘folded linear deployment',designed to position the sand fence orthogonally to the two predominant wind directions for optimal protection.This study used wind tunnel and field tests to evaluate the wind and sand flow characteristics,as well as the windproof and sandresistant performance of folded linear HDPE(Highdensity polyethylene)board sand fences.The results suggest that the airflow around the fence creates clear zoning characteristics.The deceleration area on the BSF(backwind side of the sand fence)is much larger than that on the DSF(downwind side of the sand fence).Thus,sand particles are primarily deposited on the BSF.At different wind speeds,the airflow at 2 and 5 h on the DSF is not disturbed.The WSP(wind speed profile)presents a logarithmic distribution.The airflow is disturbed at 1-20 h on the BSF,and the WSP gradually deviates from the logarithmic law.However,as the airflow moves away from the fence,the WSP gradually approaches a logarithmic distribution.Meanwhile,the WPE(windproof efficiency)and SRE(sand-resistant efficiency)of the sand fence exceed 80%.In addition,the results of wind tunnel tests are compared with those of field tests.The overall dispersion is good,and the best dispersion is found at z/H=2.00,indicating good agreement between the two test results.This study provides a scientific basis for the design of sand hazard control measures,similar to the railway project in the Gobi Gale area.
基金supported by the National Key Research and Development Program of China(2020YFB1804900 and 2022YFE0210900)the Fundamental Research Funds for the Central Universities(2242022k60008 and 2242022k30003)+2 种基金the National Natural Science Foundation of China(62301152 and 61627801)the Youth Talent Promotion Foundation of Jiangsu Science and Technology Association(TJ-2023-074)the Startup Research Fund of Southeast University(RF1028623286).
文摘In this article,a single-board integrated millimeter-wave(mm-Wave)asymmetric full-digital beamforming(AFDBF)array is developed for beyond-fifth-generation(B5G)and sixth-generation(6G)communications.The proposed integrated array effectively addresses the challenge of arranging a large number of ports in a full-digital array by designing vertical connections in a three-dimensional space and successfully integrating full-digital transmitting(Tx)and receiving(Rx)arrays independently in a single board.Unlike the traditional symmetric array,the proposed asymmetric array is composed of an 8×8 Tx array arranged in a square shape and an 8+8 Rx array arranged in an L shape.The center-to-center distance between two adjacent elements is 0.54k0 for both the Tx and Rx arrays,where k0 is the free-space wavelength at 27 GHz.The proposed AFDBF array possesses a more compact structure and lower system hardware cost and power consumption compared with conventional brick-type full-digital arrays.In addition,the energy efficiency of the proposed AFDBF array outperforms that of a hybrid beamforming array.The measurement results indicate that the operating frequency band of the proposed array is 24.25–29.50 GHz.An eight-element linear array within the Tx array can achieve a scanning angle ranging from-47°to+47°in both the azimuth and the elevation planes,and the measured scanning range of each eight-element Rx array is–45°to+45°.The measured maximum effective isotropic radiated power(EIRP)of the eight-element Tx array is 43.2 dBm at 28.0 GHz(considering the saturation point).Furthermore,the measured error vector magnitude(EVM)is less than 3%when 64-quadrature amplitude modulation(QAM)waveforms are used.
文摘背景:目前运动疗法是非药物治疗腰痛的有效方法,运动疗法可通过骨骼和肌肉之间的机械-化学偶联维持腰椎的稳定,但目前尚无关于运动疗法通过机械-化学偶联缓解慢性非特异性下背痛之间研究进展及最佳治疗方案的明确阐述。目的:综述运动疗法时椎旁肌通过机械-化学偶联影响腰椎稳定性进而缓解慢性非特异性下背痛的相关研究进展,以及目前运动疗法治疗慢性非特异性下背痛的最佳方案。方法:在万方数据库、中国知网、维普、Web of Science和PubMed数据库进行文献检索,以“慢性非特异性下背痛,腰椎稳定,椎旁肌,运动疗法”为中文检索词,以“chronic nonspecific low back pain,lumbar stabilization,paravertebral muscle,exercise therapy”为英文检索词,检索各数据库建库至2024年1月发表的相关文献,最终纳入93篇文献进行归纳总结。结果与结论:运动疗法可以通过适当的机械刺激作用于椎旁肌和骨骼并使其产生相应的变化。运动疗法主要通过机械-化学偶联方式来提高椎旁肌的质量,进而维持腰椎稳定,从而更好地缓解慢性非特异性下背痛,是慢性非特异性下背痛的重要干预措施。但是,对于运动疗法通过腰椎稳定来治疗慢性非特异性下背痛的确切有效方案尚无明确报道。个体化运动方案的制定对于慢性非特异性下背痛的治疗和预后尤为重要。同一个体的肌肉质量与骨骼质量是密切相关的,影像学评估椎旁肌的质量和体积对于疾病的发现和干预具有重要意义。
