A multi-purpose prototype test system for mechanical behavior of tunnel supporting structure: Development and application

A multi-purpose prototype test system is developed to study the mechanical behavior of tunnel sup-porting structure,including a modular counterforce device,a powerful loading equipment,an advanced intelligent management system and an efficient noncontact deformation measurement system.The functions of the prototype test system are adjustable size and shape of the modular counterforce structure,sufficient load reserve and accurate loading,multi-connection linkage intelligent management,and high-precision and continuously positioned noncontact deformation measurement.The modular counterforce structure is currently the largest in the world,with an outer diameter of 20.5 m,an inner diameter of 16.5 m and a height of 6 m.The case application proves that the prototype test system can reproduce the mechanical behavior of the tunnel lining during load-bearing,deformation and failure processes in detail.

Analysis of Corrosion Mechanisms of Low-cement or No-cement Al_(2)O_(3)-MgO Gunning Mix with Special Calcined Alumina in Rotary Slag Test

Al_(2)O_(3)-MgO and Al_(2)O_(3)-spinel low cement castables(LCC-AM and LCC-AS)have been extensively used in steel ladles as working linings.Nevertheless,the use of alumina-magnesia gunning mixes has been mainly kept for maintaining these castable linings,because of high rebound loss,poor green strength,high porosity and short life-span.Thanks to a high BET alumina(MC-G),it is now possible to develop a series of high-performance no-cement or low-cement Al_(2)O_(3)-MgO gunning mixes(NCG-AM or LCG-AM).The paper focuses on the BOF slag resistance of NCG-AM,LCG-AM,LCC-AM and LCC-AS.The corrosion mechanisms of rotary slag samples were studied by scanning electron microscopy(SEM/EDS).The results reveal different microstructures around MgO particles,depending on the four used compositions.Continuous and thicker spinel phases were formed in NCG-AM,which was proved to have the best corrosion resistance after the dynamic slag test.MC-G can provide a high diffusion flux of Al^(3+)in terms of kinetics and hence inhibits Kirkendall porosity around MgO particles.In addition,a continuous spinel phase acts like a pinning nail to reinforce the matrix and thus decreases erosion by slag.In contrast to NCG-AM,the porous spinel phase was found around unreacted MgO particles and some particles were carried away near the interface of LCC-AM and slag.The NCG-AM containing MC-G had been tested in two steel plants,and it extended the service life of the ladles up to 50%.In addition,this study suggests the potential application of NCG-AM as steel ladle linings.

DISCRETIZATION APPROACH USING RAY-TESTING MODEL IN PARTING LINE AND PARTING SURFACE GENERATION

Surface classification, 3D parting line, parting surface generation and demoldability analysis which is helpful to select optimal parting direction and optimal parting line are involved in auto-matic cavity design based on the my-testing model. A new ray-testing approach is presented to classify the part surfaces to core/cavity surfaces and undercut surfaces by automatic identifying the visibility of surfaces. A simple, direct and efficient algorithm to identify surface visibility is developed. The algorithm is robust and adapted to rather complicated geometry, so it is valuable in computer-aided mold design systems. To validate the efficiency of the approach, an experimental program is implemented. Case studies show that the approach is practical and valuable in automatic parting line and parting surface generation.

±800-kV UHVDC demonstration project passed live line test

On December 26, 2009, in the main control room of Shanghai Fengxian Converter Station, the voltage value on the screen rose from zero to 800 kV. This represented the demonstrative ±800-kV

基于QZD-160型气动振动器的混凝土振捣工艺试验研究

针对预应力复合衬砌施工中因结构中钢筋和钢绞线密集而导致的狭小空间内混凝土浇筑振捣困难的问题,提出在钢模台车背面附着气动振动器。为明确气动振动器的可行性与适用性,基于QZD-160型气动振动器开展了预应力复合衬砌拱顶和拱腰区域的模型试验,通过断面目测、超声波检测和钻孔取芯等手段明确了该设备的作用深度、作用半径及运行风压等关键参数。结果表明,当单台QZD-160型气动振动器的运行风压为0.6 MPa时,其作用深度不小于0.55 m,作用半径约为0.9 m;建议将振动器在钢模台车上按等边三角形交错布置,并将环向和纵向的间距均控制在1.5 m内,且振动器运行风压需达0.6 MPa以上。

A Ray-Testing Approach to Automatically Identify Surface Visibility in Parting Line Generation

It is critical to identify core/cavity and undercut surfaces of molds in parting line generation. A new Ray-Testing approach is presented to detect these surfaces by identifying the visibility of surfaces. A simple, direct and efficient algorithm to identify surface visibility is developed. Case studies show that the approach is practical and valuable in automated parting line generation.

KYL-8/25D多功能钻机的结构设计及工艺研发

为适应我国川藏线隧洞钻孔施工工艺需求,降低操作人员劳动强度,提高钻孔效率,自主研发了一款KYL-8/25D多功能钻机,解决了现有钻探装备在施工中存在的探测距离短和效率低问题。利用SolidWorks建立三维模型,通过对各结构的功能介绍以及钻杆的仿真模拟计算,验证了该设计的可行性。最后通过现场调试试验也验证了钻机的实际成效,为川藏线隧洞施工提供了设计依据和成功工程实例。

一个改进的陆面过程模式及其模拟试验研究第一部分:陆面过程模式及其“独立(off-line)”模拟试验和模式性能分析

文中在综合比较过去各类陆面过程模式优缺点的基础上，主要参考ＢＡＴＳ模式，发展了一个陆面过程模式（ＬＰＭ－ＺＤ）。它具有以下几个特征：１．采用物理方程和经验解析公式相结合的方法进行土壤温度和土壤水汽的求解。在上层土壤，土壤分层较细并采用温度传导和水汽扩散方程求解，而在下层土壤，土壤分层较粗并利用经验方法处理。２．考虑了降水分布的次网格特征及其对陆面水文产生的重要影响。３．较全面地考虑了雪盖对陆面过程的各种影响：对陆面水文的影响、对土壤热传导的影响以及雪盖的高反照率对辐射收支的影响。利用３组单点观测试验资料对陆面过程模式ＬＰＭ－ＺＤ进行了“独立（ｏｆ－ｌｉｎｅ）”模拟试验。模拟结果表明陆面过程模式ＬＰＭ－ＺＤ具有较好的模拟性能，能够比较准确地模拟不同气候区的多种下垫面类型的陆面过程变化特点，模拟结果与观测基本一致。进而又利用一组观测资料和模式ＬＰＭ－ＺＤ进行了一系列敏感性模拟试验，试验结果表明模式ＬＰＭ－ＺＤ对一些参数的确定非常敏感，如初始土壤水汽、植被的物理特性参数以及降水次网格分布因子等，因此提高确定这些参数的准确性是改进陆面模式的重要内容之一。

基于图像处理-深度学习的孵前种鸭蛋外部品质在线无损检测

种鸭蛋的品质影响着孵化率和健雏率,挑选优质种鸭蛋孵化不仅可以减少孵化占用的资源,还可以及时将不适宜孵化的种鸭蛋筛选出另做它用,避免其孵化失败造成浪费。为了对不同外部品质的孵前种鸭蛋进行检测分级,该研究设计了一种基于图像处理和深度学习的种鸭蛋外部品质检测系统。在传送轨道上获取种鸭蛋的透射图像后,选取多张鸭蛋图像中的最大长轴计算形状特征,通过交错值衡量大小头相似度;在伽马变换平衡图像颜色后,使用HSV分割提取脏污特征图来计算脏污面积;采用自适应阈值分割和脏污特征图掩膜对图像样本数据进行预处理,搭建裂纹识别网络CrackNet来识别脏污鸭蛋的裂纹。结果表明,该检测系统可计算种鸭蛋的大小、蛋形指数、脏污面积和大小头相似度,检测表面裂纹,计算所得长轴和蛋形指数的均方误差仅0.2202 mm^(2)和0.000058,CrackNet的裂纹识别准确率为98.03%,研究结果可为入孵前种鸭蛋的筛选工作提供技术支持。

LDRA TestBed在CTCS2-200C扩展单元软件测试中的应用

介绍了LDRA Test Bed软件测试工具和CTCS2-200C扩展单元,以CTCS2-200C为例,通过对软件进行静态和动态测试,参照EN 50128:2011标准,提高了整个软件开发生命周期中的各项验证和确认活动效率,降低了软件的风险。

钢-PVA混杂纤维高性能混凝土隧道衬砌管片抗弯性能试验

为研究钢纤维、聚乙烯醇(PVA)纤维、矿粉3种因素对混杂纤维高性能混凝土隧道衬砌管片受力性能的影响,针对不同体积分数的钢纤维(0.5%,1.0%,1.5%)、PVA纤维(0.1%,0.2%,0.3%)和不同掺量的矿粉(10%,20%,30%)设计了L_(9)(3^(3))的正交试验,并制作1块钢筋混凝土(RC)衬砌管片和9块钢-PVA混杂纤维高性能混凝土衬砌管片进行抗弯性能试验。研究结果表明:与RC衬砌管片相比,钢-PVA混杂纤维能显著提升衬砌管片开裂弯矩、裂缝宽度0.2 mm对应的弯矩、屈服弯矩、极限弯矩和控制裂缝开展的能力,其中钢纤维对管片极限弯矩提升最为显著,最大提升幅度达64.0%,其次是矿粉和PVA纤维;3种因素的最佳掺量组合为:1.5%钢纤维,0.3%PVA纤维和20%矿粉。对钢-PVA混杂纤维混凝土的选用原则和在衬砌管片的应用提供理论及试验依据。

Pulsed Eddy Current Non-destructive Testing and Evaluation:A Review

Pulsed eddy current （PEC） non-destructive test- ing and evaluation （NDT＆E） has been around for some time and it is still attracting extensive attention from researchers around the globe, which can be witnessed through the reports reviewed in this paper. Thanks to its richness of spectral components, various applications of this technique have been proposed and reported in the lit- erature covering both structural integrity inspection and material characterization in various industrial sectors. To support its development and for better understanding of the phenomena around the transient induced eddy currents, attempts for its modelling both analytically and numeri- cally have been made by researchers around the world. This review is an attempt to capture the state-of-the-art development and applications of PEC, especially in the last 15 years and it is not intended to be exhaustive. Future challenges and opportunities for PEC NDT＆E are also presented.

The 0-1 test algorithm for chaos and its applications

To determine whether a given deterministic nonlinear dynamic system is chaotic or periodic, a novel test approach named zero-one （0-1） test has been proposed recently. In this approach, the regular and chaotic motions can be decided by calculating the parameter K approaching asymptotically to zero or one. In this study, we focus on the 0-1 test algorithm and illustrate the selection of parameters of this algorithm by numerical experiments. To validate the reliability and the universality of this algorithm, it is applied to typical nonlinear dynamic systems, including fractional-order dynamic system.

Detecting land subsidence near metro lines in the Baoshan district of Shanghai with multi-temporal interferometric synthetic aperture radar

Land subsidence is a major factor that affects metro line （ML） stability. In this study, an improved multi- temporal interferometric synthetic aperture radar （InSAR） （MTI） method to detect land subsidence near MLs is presented. In particular, our multi-temporal InSAR method provides surface subsidence measurements with high observation density. The MTI method tracks both point-like targets and distributed targets with temporal radar back- scattering steadiness. First, subsidence rates at the point targets with low-amplitude dispersion index （ADI） values are extracted by applying a least-squared estimator on an optimized freely connected network. Second, to reduce error propagation, the pixels with high-ADI values are classified into several groups according to ADI intervals and processed using a Pearson correlation coefficient and hierarchical analysis strategy to obtain the distributed targets. Then, nonlinear subsidence components at all point-like and distributed targets are estimated using phase unwrapping and spatiotemporal filtering on the phase residuals. The proposed MTI method was applied to detect land subsidence near MLs of No. 1 and 3 in the Baoshan district of Shanghai using 18 TerraSAR-X images acquired between April 21, 2008 and October 30, 2010. The results show that the mean subsidence rates of the stations distributed along the two MLs are -12.9 and -14.0 ram/year. Furthermore, three subsidence funnels near the MLs are discovered through the hierarchical analysis. The testing results demonstrate the satisfactory capacity of the proposed MTI method in providing detailed subsidence information near MLs.

MiR-25-3p attenuates the proliferation of tongue squamous cell carcinoma cell line Tca8113

Objective:To investigate the effects of miR-25-3p on the occurrence,development and proliferation of tongue squamous cell carcinoma cells.Methods:To establish tongue squamous cell carcinoma cell line Tca8113 that stably and highly express miR-25-3p using recombinant reiroviral vector-mediated gene transfer method.The proliferation of transfected Tca8113 was detected by thiazolyl blue tetrazolium bromide(MTT)and cell colony formation assays.eyclnD1,p21^(cipt)and p27^(kipt)mRNA expressions in the transfected Tca-8113 were detected by quantitative PCR.cyclinD1,p21^(cipt),p27^(kipt),AKT,p-AKT,FOXOt and p-FOX01 expressions in the transfected Tca8113 were detected by western blot analysis.In addition,miR-25-3p expression in the tongue squamous cell carcinoma cell line and tissue specimen was also detected by quantitative PCR.Results:Quantitative PCR showed that mitt-25-3p expression in the tongue squamous cell carcinoma cell lines and tissue specimen was significantly lower than that in the adjacent tissue.MTT and cell colony formation assays showed that after miR-25-3p overexpression,the proliferation of transfected Tca8113 was obviously attenuated.Western blot analysis and quantitative PCR showed that after miR-25-3p overexpression.p21^(cipt)and p27^(kipt)expressions were upregulated,while cyclinD1,AKT,FOXO1 expressions were downregulated,and AKT and FOXO1 phosphorylation was inactivated in the transfected Tca8113 cells.Conclusions:MiR-25-3p inhibited the proliferation of tongue squamous cell carcinoma cells and regulated cell cycle-related protein expression,playing an important role in the occurrence and development of squamous cell carcinoma of the tongue.

Discovery of a variable broad absorption line in the BL Lac object PKS B0138-097

We report the discovery of a broad absorption line （BAL） of - 10^4 km s^-1 in width in the previously known BL Lac object PKS 0138-097, which we tentatively identified as an Mg II BAL. This is the first detection of a BAL, which is sometimes seen in powerful quasars with high accretion rates, in a BL Lac object. The BAL was clearly detected in its spectra spanning two epochs at a high luminosity state taken in the Sloan Digital Sky Survey （SDSS）, while it disappeared in three SDSS spectra taken at a low luminosity state. The BAL and its variability pattern were also found in its historical multi-epoch spectra in the literature, but have been overlooked previously. In its high resolution radio maps, PKS 0138-097 shows a core plus a one- sided parsec-scale jet. The BAL variability can be interpreted as follows： The optical emission is dominated by the core in a high state and by the jet in a low state and the BAL material is located between the core and jet so that the BAL appears only when the core is shining. Our discovery suggests that outflows may also be produced in active galactic nuclei at a low accreting state.

Magneto-induced Line Broadening of Magneto-sensitive Lines in Solar Magnetized Atmospheres

We analyze the spectral line broadening of those magneto-sensitive lines in solar magnetized atmospheres. The broadening at the line wings is due to the increase of the effective width of energy levels involved in Zeeman splitting,and the broadening at the line core also originated in Zeeman splitting under the condition that the Zeeman components are mixed. Therefore, the magneto-induced or Zeeman broadening take effects on the whole line. The observed Stokes parameter data in a sunspot and outside it acquired by Solar Stokes Spectrum Telescope （S^3T） are analyzed for the demonstration of this mechanism, and the Zeeman broadening rates are calculated for Fe16302.5 under some assumptions.Our result shows that the broadening is increased as the magnetic field strength becomes stronger, but the rate of increase at the line core is decreased as the field strength increases, while the rate at the wing does not show such an obvious regularity. The broadening is more effective in the line core than in the wings.

Line Broadening in a Limb Flare: Derivation of Macro-turbulent Velocity Fields

The line profiles of Ha in a limb flare on 1998 November 11 appear to be unusually broadened. It is considered that macro-turbulence (or macroscopic mass motions) may be one of the main causes. We use an inversion technique to extract the probability distribution of the line-of-sight velocity in the flare. There exist some differences between the velocity distributions deduced from Ha and from Ca II λ8542, which may be because the two lines depend differently on the temperature and velocity. Since the loop density is high, we obtain a rather short cooling time (several tens of seconds) from the hot X-ray loops to the cool loops visible in Ha. Possible origins of the large scale motions are discussed.

THE DIFFERENTIATION OF HUMAN GASTRIC ADENOCAR-CINOMA CELL LINE MGc80-3 INDUCED BY DIBUTYRYL cAMP IN VITRO

For providing some experimental basis in establishing malignant phenotypic reversed indexes of gastric carcinoma cells, human gastric adenocar-cinoma cell line MGc80-3 was induced by dBcAMP in vitro to appraise the effect of gastric carcinoma cell differentiation by chemical inducers.Under light microscope, MGc80-3 cells, after treated with 1 mM dBcAMP, tended to be flat and disperse, and their volume gradually enlarged, with their uncleus relatively smaller and their shape rather regular. Morphological changes, like norma differentiated epithelial cells, were observed. The cells attached firmly, grew slowly, their growth curve showed inhibitory rate amounted to 52.87%, and cellular division exponent displayed their peak value 1.5 times less than that of MGc80-3 cells. It was clear that dBcAMP could effectively inhibit the multiplication activity of MGc80-3 cells. After dBcAMP treatment, remarkable changes of cell surface charges was indicated by cell electrophoresis, the ratio dropped to 3.043 from 3.988, and their re-tardant ratio reached up to 31.2%. cAMP content in cells after this treatment, detected by cAMP and cGMP radioimmunoassay, was enhanced by 2.42 times, and cAMP/cGMP ratio, by 1.73 times. Thus, cAMP level within MGc80-3 cells was raised obviously by dBcAMP. Heterotransplantation experiments showed that tuntorigenic rate of MGc80-5 cells (transplanted subcutaneously to BALB/c mice) amounted to 100%, and that of the cells after this treatment was only 5.6%. Their tumorigenic ability was extremely reduced.These results confirmed that dBcAMP was able to change malignant phenotypic characteristics of MGc80-3 cells and produce a reversed alteration: Thus, it has a remarkable inductive effect in differentiating gastric carcinoma cells. All these characteristics were also considered as the reference indexes in appraising reversed effect for the homologous cancer cells.

基于Test Method 1311法重结晶α-半水石膏重金属元素的浸出特性研究

以脱硫石膏及其常压盐溶液法重结晶得到的α-半水石膏为研究对象,采用改进的Tessier流程和Test Method 1311法研究两种石膏晶体重金属元素的赋存形态和浸出特性,并对其进行环境效应评价。结果表明:重结晶过程能够释放脱硫石膏中的重金属元素并使其赋存形态改变;重结晶后石膏晶体中的重金属组分短期内可达到释放平衡,其中Cr、Pb、Ni元素的最大浸出量明显低于对应的脱硫石膏,As元素的浸出量几乎不变;α-半水石膏的环境友好性优于脱硫石膏,但仍具有污染环境的潜在风险。