This paper aims to contribute to the classification and specification of glass fiber reinforced concrete (GFRC) and to deal with the question if structural glass fiber reinforced concrete as a special kind of glass fi...This paper aims to contribute to the classification and specification of glass fiber reinforced concrete (GFRC) and to deal with the question if structural glass fiber reinforced concrete as a special kind of glass fiber reinforced concrete is suited for use in load-bearing members. Despite excellent material properties, the use of glass fibers in a concrete matrix is carried out so far only in non- structural elements or as a modification for the prevention of shrinkage cracks. The aim of re- search at the University of Applied Sciences in Leipzig is the use of alkali-resistant macro glass fibers as concrete reinforcement in structural elements as an alternative to steel fiber reinforcement. Slabs on ground, as an example for structural members, provide a sensible application for the new material because they can be casted as load bearing and non-load bearing and are mostly made of steel fiber reinforced concrete. In the future, structural glass fiber reinforced concrete shall provide a simple and visually appealing alternative to conventional steel bar or steel fiber reinforced concrete. The glass fibers can also be used in combination with conventional reinforcing bars or mat reinforcements. Initial investigations have announced some potential.展开更多
Using the neutral grounding method by the resistance in 110?kV system, it can limit the voltage sag and short circuit current when one-phase grounding fault occurred, but it will change the sequence of the network str...Using the neutral grounding method by the resistance in 110?kV system, it can limit the voltage sag and short circuit current when one-phase grounding fault occurred, but it will change the sequence of the network structure and parameters. This paper analyzes the size and distribution of zero sequence voltage and current when one-phase grounding fault occurred in the 110 kV resistance grounding system, and puts forward the grounding protection configuration setting principle of this system combining the power supplying characteristics of 110?kV distribution network. In a reforming substation as an example, the grounding protection of 110 kV lines and transformer have been set and calculated.展开更多
Today the entire globe is shrouded in an inefficient three-phase system. There is however an efficient single-wire system. To use the single wire method, three phase systems can be converted to triple one wire systems.
This paper researches the voltage transfer characteristics when one-phase ground fault occurred in the resistance grounding system, by using the theory of the asymmetric variable characteristics and the sequence netwo...This paper researches the voltage transfer characteristics when one-phase ground fault occurred in the resistance grounding system, by using the theory of the asymmetric variable characteristics and the sequence network analysis of the -11 transformer, and concludes the scope of voltage sag and swell and the degree of power frequency overvoltage and their influencing factors in the 110 kV resistance grounding system. Accordingly this paper puts forward the resistance choosing principle: the resistance grounding coefficient must be equal to or greater than 10. So it can not only wipe out the voltage sag and voltage swell but also make sure the overvoltage is limited to electrical equipment allowing range. The method mentioned above is verified by simulation results of a 110 kV power system in ATP.展开更多
On the assumption that seismic source is simplified as linear rupture fault with finite length, this paper qualitatively studies the seismic source effects on space correlation of strong ground motion. Based on expand...On the assumption that seismic source is simplified as linear rupture fault with finite length, this paper qualitatively studies the seismic source effects on space correlation of strong ground motion. Based on expanding expression of Fourier spectrum of strong ground motion with space coordinate variables, this paper also gives a expression of describing correlation of strong ground motion field. According to far-field condition, the theoretical formula of the expression can be obtained. Furthermore, this paper presents a theoretical formula of estimation the radius of strong ground motion field, which depends on expansion condition of Fourier spectrum of strong ground motion, with space variables. At last, taking one earthquake as an example, this paper gives three-dimension patterns of radius of the field with epicenter distance and azimuth as well as frequency.展开更多
We study the ground-state information of one-dimensional Heisenberg chain with alternating D-term. Given the ground-state phase diagram, the ground-state energy and the entanglement entropy are obtained by tensor-net ...We study the ground-state information of one-dimensional Heisenberg chain with alternating D-term. Given the ground-state phase diagram, the ground-state energy and the entanglement entropy are obtained by tensor-net work algorithm. The phase transition points are shown in the entanglement entropy figure. The results are agreed with the phase diagram.展开更多
The ground-state dipole moments and second-order nonlinear optical （NLO） properties of a series of one-dimensional （1D） chromophores with donor-bridge-acceptor （D-B-A） structures have been investigated by using ...The ground-state dipole moments and second-order nonlinear optical （NLO） properties of a series of one-dimensional （1D） chromophores with donor-bridge-acceptor （D-B-A） structures have been investigated by using the second-order MФller-Plesset （MP2） and density functional theory （DFT） methods with the basis set of 6-31＋G（d）. According to the calculated results, the relationship between the molecular static first hyperpolarizability （βμ） and the directions of electron transition has been summarized. In terms of the sign of βμ, these 1D organic chromophores were classified into two categories： type Ⅰ with negative βμ and type Ⅱ bearing positive βμ. The analyses show that the remarkable difference of the first hyperpolarizabilities between Ⅰ and Ⅱ chromophores is associated mainly with the electrostatic interaction between terminal groups and the transport electrons in excited states. Moreover, different from the popular viewpoint, the obtained results also show that most of this series of 1D D-B-A molecules are more charge-separated in the ground states than in the excited states. As a whole, this theoretical investigation, to some extent, can be considered as a useful reference in designing the NLO chromophores with large first hyperpolarizabilities.展开更多
We present a quantum-chemical analysis of the relationship between the bond length alteration （BLA） and the static first hyperpolarizability of a series of one-dimensional （1D） chromophores with donor-bridge-accep...We present a quantum-chemical analysis of the relationship between the bond length alteration （BLA） and the static first hyperpolarizability of a series of one-dimensional （1D） chromophores with donor-bridge-acceptor （D-B-A） structures. The calculated results show that the parameter BLA can be considered as an indicator to evaluate the molecular first hyper- polarizability. Along the direction of molecular ground-state dipole moments, the evolutions of BLA can be classified into three categories： the first is a non-monotonic line, which represents most chromophores; the second is monotonic increasing; and the third, contrarily, is monotonic decreasing. On the whole, the first hyperpolarizabilities of these studied chromophores are the monotonic functions of BLA along the direction of dipole moments. Therefore, the first hyperpolarizability of these 1D chromophores can be preliminarily evaluated in terms of the development of BLA without a rigorous computation. In other words, one can roughly estimate the relative magnitude of the first hyperpolarizability according to the optimized geometry.展开更多
文摘This paper aims to contribute to the classification and specification of glass fiber reinforced concrete (GFRC) and to deal with the question if structural glass fiber reinforced concrete as a special kind of glass fiber reinforced concrete is suited for use in load-bearing members. Despite excellent material properties, the use of glass fibers in a concrete matrix is carried out so far only in non- structural elements or as a modification for the prevention of shrinkage cracks. The aim of re- search at the University of Applied Sciences in Leipzig is the use of alkali-resistant macro glass fibers as concrete reinforcement in structural elements as an alternative to steel fiber reinforcement. Slabs on ground, as an example for structural members, provide a sensible application for the new material because they can be casted as load bearing and non-load bearing and are mostly made of steel fiber reinforced concrete. In the future, structural glass fiber reinforced concrete shall provide a simple and visually appealing alternative to conventional steel bar or steel fiber reinforced concrete. The glass fibers can also be used in combination with conventional reinforcing bars or mat reinforcements. Initial investigations have announced some potential.
文摘Using the neutral grounding method by the resistance in 110?kV system, it can limit the voltage sag and short circuit current when one-phase grounding fault occurred, but it will change the sequence of the network structure and parameters. This paper analyzes the size and distribution of zero sequence voltage and current when one-phase grounding fault occurred in the 110 kV resistance grounding system, and puts forward the grounding protection configuration setting principle of this system combining the power supplying characteristics of 110?kV distribution network. In a reforming substation as an example, the grounding protection of 110 kV lines and transformer have been set and calculated.
文摘Today the entire globe is shrouded in an inefficient three-phase system. There is however an efficient single-wire system. To use the single wire method, three phase systems can be converted to triple one wire systems.
文摘This paper researches the voltage transfer characteristics when one-phase ground fault occurred in the resistance grounding system, by using the theory of the asymmetric variable characteristics and the sequence network analysis of the -11 transformer, and concludes the scope of voltage sag and swell and the degree of power frequency overvoltage and their influencing factors in the 110 kV resistance grounding system. Accordingly this paper puts forward the resistance choosing principle: the resistance grounding coefficient must be equal to or greater than 10. So it can not only wipe out the voltage sag and voltage swell but also make sure the overvoltage is limited to electrical equipment allowing range. The method mentioned above is verified by simulation results of a 110 kV power system in ATP.
文摘On the assumption that seismic source is simplified as linear rupture fault with finite length, this paper qualitatively studies the seismic source effects on space correlation of strong ground motion. Based on expanding expression of Fourier spectrum of strong ground motion with space coordinate variables, this paper also gives a expression of describing correlation of strong ground motion field. According to far-field condition, the theoretical formula of the expression can be obtained. Furthermore, this paper presents a theoretical formula of estimation the radius of strong ground motion field, which depends on expansion condition of Fourier spectrum of strong ground motion, with space variables. At last, taking one earthquake as an example, this paper gives three-dimension patterns of radius of the field with epicenter distance and azimuth as well as frequency.
文摘We study the ground-state information of one-dimensional Heisenberg chain with alternating D-term. Given the ground-state phase diagram, the ground-state energy and the entanglement entropy are obtained by tensor-net work algorithm. The phase transition points are shown in the entanglement entropy figure. The results are agreed with the phase diagram.
基金supported by the National Natural Science Foundation of China (20573114)the MOST projects of 200CB720605 and 2006DFA403020
文摘The ground-state dipole moments and second-order nonlinear optical （NLO） properties of a series of one-dimensional （1D） chromophores with donor-bridge-acceptor （D-B-A） structures have been investigated by using the second-order MФller-Plesset （MP2） and density functional theory （DFT） methods with the basis set of 6-31＋G（d）. According to the calculated results, the relationship between the molecular static first hyperpolarizability （βμ） and the directions of electron transition has been summarized. In terms of the sign of βμ, these 1D organic chromophores were classified into two categories： type Ⅰ with negative βμ and type Ⅱ bearing positive βμ. The analyses show that the remarkable difference of the first hyperpolarizabilities between Ⅰ and Ⅱ chromophores is associated mainly with the electrostatic interaction between terminal groups and the transport electrons in excited states. Moreover, different from the popular viewpoint, the obtained results also show that most of this series of 1D D-B-A molecules are more charge-separated in the ground states than in the excited states. As a whole, this theoretical investigation, to some extent, can be considered as a useful reference in designing the NLO chromophores with large first hyperpolarizabilities.
基金the National Natural Science Foundation of China (20573114)the MOST projects of 2004CB720605and 2006DFA403020
文摘We present a quantum-chemical analysis of the relationship between the bond length alteration （BLA） and the static first hyperpolarizability of a series of one-dimensional （1D） chromophores with donor-bridge-acceptor （D-B-A） structures. The calculated results show that the parameter BLA can be considered as an indicator to evaluate the molecular first hyper- polarizability. Along the direction of molecular ground-state dipole moments, the evolutions of BLA can be classified into three categories： the first is a non-monotonic line, which represents most chromophores; the second is monotonic increasing; and the third, contrarily, is monotonic decreasing. On the whole, the first hyperpolarizabilities of these studied chromophores are the monotonic functions of BLA along the direction of dipole moments. Therefore, the first hyperpolarizability of these 1D chromophores can be preliminarily evaluated in terms of the development of BLA without a rigorous computation. In other words, one can roughly estimate the relative magnitude of the first hyperpolarizability according to the optimized geometry.
