Dual-phase accelerated cooling(DPAC) was applied to X80 pipeline steel to obtain its microstructure with different amounts of bainite and ferrite. The microstructure, hardness, and polarization behaviors of the steel,...Dual-phase accelerated cooling(DPAC) was applied to X80 pipeline steel to obtain its microstructure with different amounts of bainite and ferrite. The microstructure, hardness, and polarization behaviors of the steel, cooled to different temperatures, were investigated. Results showed that, with decreasing cooling temperature, the amount of polygon ferrite(PF) increased while that of acicular ferrite(AF) decreased. The amount of bainite correspondingly decreased, except when cooled to 760°C. Moreover, the grain size of ferrite increased. The corrosion behaviors of different phases were distinct. Martensite/austenite(M/A) islands presented at the grain boundary of the PF phase caused small pits. Numerous micro-corrosion cells were formed in the AF and bainite phases, where micropores were prone to form. X80 pipeline steel cooled to 700°C had the best corrosion resistance in the simulated seawater. The decreased amount of the PF phase reduced the area of cathode, resulting in slight corrosion. About 40 vol% of the bainite phase provided strength while the PF phase provided adequate ductility to the X80 steel. It was concluded that the appropriate cooling temperature was 700°C for ideal corrosion resistance and mechanical properties.展开更多
The temporal and spatial growth behaviour of protein crystals, subject to different cooling strategies in protein crystallisation was investigated. Although the impact of temperature and cooling rate on crystal growth...The temporal and spatial growth behaviour of protein crystals, subject to different cooling strategies in protein crystallisation was investigated. Although the impact of temperature and cooling rate on crystal growth of small molecules was well documented, much less has been reported on their impact on the crystallisation of proteins. In this paper, an experimental set-up is configured to carry out such a study which involves an automatic temperature controlled hot-stage crystalliser fitted with a real-time imaging system. Linbro parallel crystallisation experiments(24-well plate) were also conducted to find the suitable initial conditions to be used in the hot-stage crystallisation experiments, including the initial concentration of HEW lysozyme solutions, precipitate concentration and pH value. It was observed that fast cooling rates at the early stage led to precipitates while slow cooling rates produced crystal nuclei, and very slow cooling rates, much smaller than for small molecules are critical to the growth of the nuclei and the crystals to a desired shape. The interesting results provide valuable insight as well as experimental proof of the feasibility and effectiveness of cooling as a means for achieving controlled protein crystallisation, compared with the evaporation approach which was widely used to grow single large crystals for X-ray diffraction study. Since cooling rate control can be easily achieved and has good repeatability, it suggests that large-scale production of protein crystals can be effectively achieved by manipulating cooling rates.展开更多
Controlled cooling technology is getting more and more attention with the development of thermal-mechanical control process. In the past decade, achieving the given finish cooling temperature was the sole goal for the...Controlled cooling technology is getting more and more attention with the development of thermal-mechanical control process. In the past decade, achieving the given finish cooling temperature was the sole goal for the technology. However ,with the research and development of new steels such as super high strength steel, researchers have in recent years realized the determinate effects that different cooling paths have on the finish cooling temperature and paid more attention to the control of the cooling rate. This paper focuses on not only the optimization of the controlled cooling system with high precision and fast cooling rate, but also the research and development of the high strength steel plate with reduced alloying component.展开更多
Accelerator generates a lot of heat when it is working.It must be cooled by the circulating cooling water.Generally the heat was released to atimosphere by the cooling water tower.Because the heat energy is very huge(...Accelerator generates a lot of heat when it is working.It must be cooled by the circulating cooling water.Generally the heat was released to atimosphere by the cooling water tower.Because the heat energy is very huge(about 2M watts for HIRFL),it is big waste and the machine can’t be cooled to appropriate temperature when ambient temperature is high in summer.In order to solve the problems,the heat pump has been展开更多
借助船级社规范与MATLAB软件,开发可提取浮式生产储卸油装置(Floating Production Storage and Offloading,FPSO)管道任意位置处加速度的程序,以便更好地对FPSO主甲板冷却水管路系统进行应力分析。将该系统任意位置处实际加速度值和FPS...借助船级社规范与MATLAB软件,开发可提取浮式生产储卸油装置(Floating Production Storage and Offloading,FPSO)管道任意位置处加速度的程序,以便更好地对FPSO主甲板冷却水管路系统进行应力分析。将该系统任意位置处实际加速度值和FPSO船体重心处加速度值以均布载荷形式分别施加至管道上,利用CAESARⅡ软件分析在满载工况条件下该系统的应力变化。结果表明,在FPSO满载工况条件下,采用重心处加速度值得到的结果相较于其自身实际加速度值的作用结果会出现应力冗余和应力不足的情况,例如节点50应力增加1.01%,而节点2570应力减小0.19%。展开更多
One of the most important components of a linac is bunchcr. Throughout most of the buncher, the electrons are well forward of the crest and have velocities considerably less than light velocity, thus they arc in a reg...One of the most important components of a linac is bunchcr. Throughout most of the buncher, the electrons are well forward of the crest and have velocities considerably less than light velocity, thus they arc in a region of radial dcfocusing and a considerable fraction of the beam will be lost unless defocusing action is counteracted by some other applied forces. The simplest way to do this is to sct up a longitudinal magnetic field which intcmcts with the radial motion of the electrons and causes them to follow helical orbits through the space occupied by the field. In this paper, five solenoids were designed to provide necessary magnetic field inside the bunchcr. Magnetic field was analytically calculated and compared with simulation results of Computer Simulation Technology （CST）. Because of resistance in wires, some amount of energy appears in form of heat, so heat power was calculated analytically and cooling system was designed for these solenoids by Analysis System （ANSYS）.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.51761030 and 51701064)the Inner Mongolia Natural Science Foundation(No.2019MS05081)
文摘Dual-phase accelerated cooling(DPAC) was applied to X80 pipeline steel to obtain its microstructure with different amounts of bainite and ferrite. The microstructure, hardness, and polarization behaviors of the steel, cooled to different temperatures, were investigated. Results showed that, with decreasing cooling temperature, the amount of polygon ferrite(PF) increased while that of acicular ferrite(AF) decreased. The amount of bainite correspondingly decreased, except when cooled to 760°C. Moreover, the grain size of ferrite increased. The corrosion behaviors of different phases were distinct. Martensite/austenite(M/A) islands presented at the grain boundary of the PF phase caused small pits. Numerous micro-corrosion cells were formed in the AF and bainite phases, where micropores were prone to form. X80 pipeline steel cooled to 700°C had the best corrosion resistance in the simulated seawater. The decreased amount of the PF phase reduced the area of cathode, resulting in slight corrosion. About 40 vol% of the bainite phase provided strength while the PF phase provided adequate ductility to the X80 steel. It was concluded that the appropriate cooling temperature was 700°C for ideal corrosion resistance and mechanical properties.
基金Supported by the China One Thousand Talent Scheme,the National Natural Science Foundation of China under its Major Research Scheme of Meso-scale Mechanism and Control in Multi-phase Reaction Processes(91434126)the Natural Science Foundation of Guangdong Province(2014A030313228)+1 种基金benefited from early work funded by UK Engineering and Physical Science Research Council(EP/H008012/1EP/H008853/1)
文摘The temporal and spatial growth behaviour of protein crystals, subject to different cooling strategies in protein crystallisation was investigated. Although the impact of temperature and cooling rate on crystal growth of small molecules was well documented, much less has been reported on their impact on the crystallisation of proteins. In this paper, an experimental set-up is configured to carry out such a study which involves an automatic temperature controlled hot-stage crystalliser fitted with a real-time imaging system. Linbro parallel crystallisation experiments(24-well plate) were also conducted to find the suitable initial conditions to be used in the hot-stage crystallisation experiments, including the initial concentration of HEW lysozyme solutions, precipitate concentration and pH value. It was observed that fast cooling rates at the early stage led to precipitates while slow cooling rates produced crystal nuclei, and very slow cooling rates, much smaller than for small molecules are critical to the growth of the nuclei and the crystals to a desired shape. The interesting results provide valuable insight as well as experimental proof of the feasibility and effectiveness of cooling as a means for achieving controlled protein crystallisation, compared with the evaporation approach which was widely used to grow single large crystals for X-ray diffraction study. Since cooling rate control can be easily achieved and has good repeatability, it suggests that large-scale production of protein crystals can be effectively achieved by manipulating cooling rates.
文摘Controlled cooling technology is getting more and more attention with the development of thermal-mechanical control process. In the past decade, achieving the given finish cooling temperature was the sole goal for the technology. However ,with the research and development of new steels such as super high strength steel, researchers have in recent years realized the determinate effects that different cooling paths have on the finish cooling temperature and paid more attention to the control of the cooling rate. This paper focuses on not only the optimization of the controlled cooling system with high precision and fast cooling rate, but also the research and development of the high strength steel plate with reduced alloying component.
基金Supported by WTZ project of BMBF,Germany Government.
文摘Accelerator generates a lot of heat when it is working.It must be cooled by the circulating cooling water.Generally the heat was released to atimosphere by the cooling water tower.Because the heat energy is very huge(about 2M watts for HIRFL),it is big waste and the machine can’t be cooled to appropriate temperature when ambient temperature is high in summer.In order to solve the problems,the heat pump has been
文摘借助船级社规范与MATLAB软件,开发可提取浮式生产储卸油装置(Floating Production Storage and Offloading,FPSO)管道任意位置处加速度的程序,以便更好地对FPSO主甲板冷却水管路系统进行应力分析。将该系统任意位置处实际加速度值和FPSO船体重心处加速度值以均布载荷形式分别施加至管道上,利用CAESARⅡ软件分析在满载工况条件下该系统的应力变化。结果表明,在FPSO满载工况条件下,采用重心处加速度值得到的结果相较于其自身实际加速度值的作用结果会出现应力冗余和应力不足的情况,例如节点50应力增加1.01%,而节点2570应力减小0.19%。
文摘One of the most important components of a linac is bunchcr. Throughout most of the buncher, the electrons are well forward of the crest and have velocities considerably less than light velocity, thus they arc in a region of radial dcfocusing and a considerable fraction of the beam will be lost unless defocusing action is counteracted by some other applied forces. The simplest way to do this is to sct up a longitudinal magnetic field which intcmcts with the radial motion of the electrons and causes them to follow helical orbits through the space occupied by the field. In this paper, five solenoids were designed to provide necessary magnetic field inside the bunchcr. Magnetic field was analytically calculated and compared with simulation results of Computer Simulation Technology （CST）. Because of resistance in wires, some amount of energy appears in form of heat, so heat power was calculated analytically and cooling system was designed for these solenoids by Analysis System （ANSYS）.
