Dual-band multi-beam reconfigurable terahertz antenna based on graphene frequency selective surface

In this paper,a dual-band graphene-based frequency selective surface(GFSS)is investigated and the operating mechanism of this GFSS is analyzed.By adjusting the bias voltage to control the graphene chemical po-tential between 0 eV and 0.5 eV,the GFSS can achieve four working states:dual-band passband,high-pass lowimpedance,low-pass high-impedance,and band-stop.Based on this GFSS,a hexagonal radome on a broadband omnidirectional monopole antenna is proposed,which can achieve independent 360°six-beam omnidirectional scanning at 1.08 THz and 1.58 THz dual bands.In addition,while increasing the directionality,the peak gains of the dual bands reach 7.44 dBi and 6.67 dBi,respectively.This work provides a simple method for realizing multi-band terahertz multi-beam reconfigurable antennas.

STRONGLY CONVERGENT INERTIAL FORWARD-BACKWARD-FORWARD ALGORITHM WITHOUT ON-LINE RULE FOR VARIATIONAL INEQUALITIES

This paper studies a strongly convergent inertial forward-backward-forward algorithm for the variational inequality problem in Hilbert spaces.In our convergence analysis,we do not assume the on-line rule of the inertial parameters and the iterates,which have been assumed by several authors whenever a strongly convergent algorithm with an inertial extrapolation step is proposed for a variational inequality problem.Consequently,our proof arguments are different from what is obtainable in the relevant literature.Finally,we give numerical tests to confirm the theoretical analysis and show that our proposed algorithm is superior to related ones in the literature.

Reconfigurable and polarization-dependent optical filtering for transflective full-color generation utilizing low-loss phase-change materials

All-dielectric metasurface, which features low optical absorptance and high resolution, is becoming a promising candidate for full-color generation. However, the optical response of current metamaterials is fixed and lacks active tuning. In this work, we demonstrate a reconfigurable and polarization-dependent active color generation technique by incorporating low-loss phase change materials(PCMs) and CaF_2 all-dielectric substrate. Based on the strong Mie resonance effect and low optical absorption structure, a transflective, full-color with high color purity and gamut value is achieved. The spectrum can be dynamically manipulated by changing either the polarization of incident light or the PCM state. High transmittance and reflectance can be simultaneously achieved by using low-loss PCMs and substrate. The novel active metasurfaces can bring new inspiration in the areas of optical encryption, anti-counterfeiting, and display technologies.

Reconfigurable mechanism-based metamaterials for ternary-coded elastic wave polarizers and programmable refraction control

Elastic metamaterials with unusual elastic properties offer unprecedented ways to modulate the polarization and propagation of elastic waves.However,most of them rely on the resonant structural components,and thus are frequency-dependent and unchangeable.Here,we present a reconfigurable 2D mechanism-based metamaterial which possesses transformable and frequency-independent elastic properties.Based on the proposed mechanism-based metamaterial,interesting functionalities,such as ternarycoded elastic wave polarizer and programmable refraction,are demonstrated.Particularly,unique ternary-coded polarizers,with 1-trit polarization filtering and 2-trit polarization separating of longitudinal and transverse waves,are first achieved.Then,the strong anisotropy of the proposed metamaterial is harnessed to realize positive-negative bi-refraction,only-positive refraction,and only-negative refraction.Finally,the wave functions with detailed microstructures are numerically verified.

Wideband low-scattering metasurface with an in-band reconfigurable transparent window

Active metasurfaces with dynamically reconfigurable functionalities are highly demanded in various practical applications.Here,we propose a wideband low-scattering metasurface that can realize an in-band reconfigurable transparent window by altering the operation states of the PIN diodes loaded on the structures.The metasurface is composed of a band-pass frequency selective surface(FSS)sandwiched between two polarization conversion metasurfaces(PCMs).PIN diodes are integrated into the FSS to switch the transparent window,while a checkerboard configuration is applied in PCMs for the diffusive-reflective function.A sample with 20×20 elements is designed,fabricated,and experimentally verified.Both simulated and measured results show that the in-band functions can be dynamically switched between beam-splitting scattering and high transmission by controlling the biasing states of the diodes,while low backscattering can be attained outside the passband.Furthermore,the resonant structures of FSS also play the role of feeding lines,thus significantly eliminating extra interference compared with conventional feeding networks.We envision that the proposed metasurface may provide new possibilities for the development of an intelligent stealth platform and its antenna applications.

Fixed-Time Sliding Mode Control With Varying Exponent Coefficient for Modular Reconfigurable Flight Arrays

The modular system can change its physical structure by self-assembly and self-disassembly between modules to dynamically adapt to task and environmental requirements. Recognizing the adaptive capability of modular systems, we introduce a modular reconfigurable flight array(MRFA) to pursue a multifunction aircraft fitting for diverse tasks and requirements,and investigate the attitude control and the control allocation problem by using the modular reconfigurable flight array as a platform. First, considering the variable and irregular topological configuration of the modular array, a center-of-mass-independent flight array dynamics model is proposed to allow control allocation under over-actuated situations. Secondly, in order to meet the stable, fast and accurate attitude tracking performance of the MRFA, a fixed-time convergent sliding mode controller with state-dependent variable exponent coefficients is proposed to ensure fast convergence rate both away from and near the system equilibrium point without encountering the singularity. It is shown that the controller also has fixed-time convergent characteristics even in the presence of external disturbances. Finally,simulation results are provided to demonstrate the effectiveness of the proposed modeling and control strategies.

Channel Estimation for Reconfigurable Intelligent Surface Aided Multiuser Millimeter-Wave/THz Systems

It is assumed that reconfigurable intelligent surface(RIS)is a key technology to enable the potential of mmWave communications.The passivity of the RIS makes channel estimation difficult because the channel can only be measured at the transceiver and not at the RIS.In this paper,we propose a novel separate channel estimator via exploiting the cascaded sparsity in the continuously valued angular domain of the cascaded channel for the RIS-enabled millimeter-wave/Tera-Hz systems,i.e.,the two-stage estimation method where the cascaded channel is separated into the base station(BS)-RIS and the RIS-user(UE)ones.Specifically,we first reveal the cascaded sparsity,i.e.,the sparsity exists in the hybrid angular domains of BS-RIS and the RIS-UEs separated channels,to construct the specific sparsity structure for RIS enabled multi-user systems.Then,we formulate the channel estimation problem using atomic norm minimization(ANM)to enhance the proposed sparsity structure in the continuous angular domains,where a low-complexity channel estimator via Alternating Direction Method of Multipliers(ADMM)is proposed.Simulation findings demonstrate that the proposed channel estimator outperforms the current state-of-the-arts in terms of performance.

Average Secrecy Capacity of the Reconfigurable Intelligent Surface-Assisted Integrated Satellite Unmanned Aerial Vehicle Relay Networks

Integrated satellite unmanned aerial vehicle relay networks(ISUAVRNs)have become a prominent topic in recent years.This paper investigates the average secrecy capacity(ASC)for reconfigurable intelligent surface(RIS)-enabled ISUAVRNs.Especially,an eve is considered to intercept the legitimate information from the considered secrecy system.Besides,we get detailed expressions for the ASC of the regarded secrecy system with the aid of the reconfigurable intelligent.Furthermore,to gain insightful results of the major parameters on the ASC in high signalto-noise ratio regime,the approximate investigations are further gotten,which give an efficient method to value the secrecy analysis.At last,some representative computer results are obtained to prove the theoretical findings.

Research and design of matrix operation accelerator based on reconfigurable array

In the case of massive data,matrix operations are very computationally intensive,and the memory limitation in standalone mode leads to the system inefficiencies.At the same time,it is difficult for matrix operations to achieve flexible switching between different requirements when implemented in hardware.To address this problem,this paper proposes a matrix operation accelerator based on reconfigurable arrays in the context of the application of recommender systems(RS).Based on the reconfigurable array processor(APR-16)with reconfiguration,a parallelized design of matrix operations on processing element(PE)array is realized with flexibility.The experimental results show that,compared with the proposed central processing unit(CPU)and graphics processing unit(GPU)hybrid implementation matrix multiplication framework,the energy efficiency ratio of the accelerator proposed in this paper is improved by about 35×.Compared with blocked alternating least squares(BALS),its the energy efficiency ratio has been accelerated by about 1×,and the switching of matrix factorization(MF)schemes suitable for different sparsity can be realized.

Energy-efficient joint UAV secure communication and 3D trajectory optimization assisted by reconfigurable intelligent surfaces in the presence of eavesdroppers

We consider a scenario where an unmanned aerial vehicle(UAV),a typical unmanned aerial system(UAS),transmits confidential data to a moving ground target in the presence of multiple eavesdroppers.Multiple friendly reconfigurable intelligent surfaces(RISs) help to secure the UAV-target communication and improve the energy efficiency of the UAV.We formulate an optimization problem to minimize the energy consumption of the UAV,subject to the mobility constraint of the UAV and that the achievable secrecy rate at the target is over a given threshold.We present an online planning method following the framework of model predictive control(MPC) to jointly optimize the motion of the UAV and the configurations of the RISs.The effectiveness of the proposed method is validated via computer simulations.

Illumination Adaptive Identification Algorithm of a Reconfigurable Modular Robot

Reconfigurable modular robots feature high mobility due to their unconstrained connection manners.Inspired by the snake multi-joint crawling principle,a chain-type reconfigurable modular robot(CRMR)is designed,which could reassemble into various configurations through the compound joint motion.Moreover,an illumination adaptive modular robot identification(IAMRI)algorithm is proposed for CRMR.At first,an adaptive threshold is applied to detect oriented FAST features in the robot image.Then,the effective detection of features in non-uniform illumination areas is achieved through an optimized quadtree decomposition method.After matching features,an improved random sample consensus algorithm is employed to eliminate the mismatched features.Finally,the reconfigurable robot module is identified effectively through the perspective transformation.Compared with ORB,MA,Y-ORB,and S-ORB algorithms,the IAMRI algorithm has an improvement of over 11.6%in feature uniformity,and 13.7%in the comprehensive indicator,respectively.The IAMRI algorithm limits the relative error within 2.5 pixels,efficiently completing the CRMR identification under complex environmental changes.

Field trial measurement and channel modeling for reconfigurable intelligent surface

With the advantage of programmable electromagnetic properties,Reconfigurable Intelligent Surfaces(RISs)havedrawn wide attention from both industry and academia.RIS-assisted communication systems can promote hugewireless channel quality improvement and remarkable coverage enhancement.This paper proposes generalpathloss model,radiation pattern and mirror beam effect of 1-bit RIS at sub-6 GHz band.Field trails have beencarried out in outdoor and indoor deployment scenarios.The proposed model is validated through extensivesimulations and field-trial measurements.In addition,an optimized RIS phase-shit design process for the mirrorbeam elimination is proposed and validated with simulations.The proposed theoretical model and measurementresults can promote future research and application in RIS-assisted communications.

A reconfigurable dynamic Bayesian network for digital twin modeling of structures with multiple damage modes

Dynamic Bayesian networks(DBNs)are commonly employed for structural digital twin modeling.At present,most researches only consider single damage mode tracking.It is not sufficient for a reusable spacecraft as various damage modes may occur during its service life.A reconfigurable DBN method is proposed in this paper.The structure of the DBN can be updated dynamically to describe the interactions between different damages.Two common damages(fatigue and bolt loosening)for a spacecraft structure are considered in a numerical example.The results show that the reconfigurable DBN can accurately predict the acceleration phenomenon of crack growth caused by bolt loosening while the DBN with time-invariant structure cannot,even with enough updates.The definition of interaction coefficients makes the reconfigurable DBN easy to track multiple damages and be extended to more complex problems.The method also has a good physical interpretability as the reconfiguration of DBN corresponds to a specific mechanism.Satisfactory predictions do not require precise knowledge of reconfiguration conditions,making the method more practical.

Mission reliability modeling and evaluation for reconfigurable unmanned weapon system-of-systems based on effective operation loop

The concept of unmanned weapon system-of-systems(UWSoS)involves a collection of various unmanned systems to achieve or accomplish a specific goal or mission.The mission reliability of UWSoS is represented by its ability to finish a required mission above the baselines of a given mission.However,issues with heterogeneity,cooperation between systems,and the emergence of UWSoS cannot be effectively solved by traditional system reliability methods.This study proposes an effective operation-loop-based mission reliability evaluation method for UWSoS by analyzing dynamic reconfiguration.First,we present a new connotation of an effective operation loop by considering the allocation of operational entities and physical resource constraints.Then,we propose an effective operationloop-based mission reliability model for a heterogeneous UWSoS according to the mission baseline.Moreover,a mission reliability evaluation algorithm is proposed under random external shocks and topology reconfiguration,revealing the evolution law of the effective operation loop and mission reliability.Finally,a typical 60-unmanned-aerial-vehicle-swarm is taken as an example to demonstrate the proposed models and methods.The mission reliability is achieved by considering external shocks,which can serve as a reference for evaluating and improving the effectiveness of UWSoS.

Electric-controlled metasurface antenna array with ultra-wideband frequency reconfigurable reflection suppression

The electric-controlled metasurface antenna array(ECMSAA)with ultra-wideband frequency reconfigurable reflection suppression is proposed and realized.Firstly,an electriccontrolled metasurface with ultra-wideband frequency reconfigurable in-phase reflection characteristics is designed.The element of the ECMSAA is constructed by loading the single electric-controlled metasurface unit on the conventional patch antenna element.The radiation properties of the conventional patch antenna and the reflection performance of electric-controlled metasurface are maintained when the antenna and the metasurface are integrated.Thus,the ECMSAA elements have excellent radiation properties and ultra-wideband frequency reconfigurable in-phase reflection characteristics simultaneously.To take a further step,a 6×10 ECMSAA is realized based on the designed metasurface antenna element.Simulated and measured results prove that the reflection of the ECMSAA is dynamically suppressed in the P and L bands.Meanwhile,high-gain and multi-polarization radiation properties of the ECMSAA are achieved.This design method not only realizes the frequency reconfigurable reflection suppression of the antenna array in the ultra-wide frequency band but also provides a way to develop an intelligent low-scattering antenna.

Multifunctional polarization converter based on multilayer reconfigurable metasurface

In the modern wireless communication system,the manipulation for polarization of electromagnetic wave plays a important role in improving the capacity and reliability of communication.In this paper,a multifunctional polarization converter(MFPC)based on the multilayer reconfigurable metasurface is proposed,which can assist the source antenna to transmit and receive multiple polarization signals.The MFPC consists of a grating which can filter out the undesired polarization and four layers of metasurfaces incorporated with PIN diodes.The functions of the MFPC include LTC and LTL polarization conversions,co-polarization transmission and reflection for arbitrary polarization.By changing the states of PIN diodes,the functions of MFPC can be dynamically switched.Loaded on the aperture of source antenna,the proposed MFPC can serve as a transmissive array with multiple polarization channels,and can also provide EM protection for source antenna by reflecting the incoming interference waves.Cascading of the metasurfaces produces Fabry-Perot resonance in the MFPC,and it contributes to the realization of LTC and LTL polarization conversions.To verify the performance of the proposed MFPC,the prototype is fabricated and tested.The measured results show that the fractional bandwidths of four functions are all higher than 31.9% with transmission or reflection coefficients higher than-2 d B.The frequency band of each function is mainly concentrated in S-band.The measured data are in agreement with the simulated results.

One-step Eco-friendly Fabrication of Antibacterial Polyester Via On-line Amination Reaction by Melt Coextrusion

The work is dedicated to develop a one-step eco-friendly method to prepare antibacterial polyethylene terephthalate(PET).We report a one-step eco-friendly method to manufacture antibacterial PET via on-line amination reaction by melt coextrusion.Beside evenly mixing of poly(hexamethylene guanidine)(PHMG)and PET in the melt coextrusion procedure,the amination reaction also occurred between PHMG and PET under high temperature(230-270℃).The antibacterial ability of composite PET showed obvious PHMG concentration dependence,and antibacterial activity reached more than 99%when PHMG content was 2.5 wt%.Moreover,LIVE/DEAD fluorescence test further confirmed that the composite PET could kill bacteria quickly and efiectively(within 30 min);while negligible cytotoxicity was observed to HSF and HUVEC cells.Onestep eco-friendly fabrication of composite antibacterial PET was accomplished by on-line melt coextrusion.The composite antibacterial PET has potential use in multiple fields to combat with pathogenic including textiles,packaging materials,decoration materials and biomedical devices,etc.

Reconfigurable Mott electronics for homogeneous neuromorphic platform

To simplify the fabrication process and increase the versatility of neuromorphic systems,the reconfiguration concept has attracted much attention.Here,we developed a novel electrochemical VO_(2)(EC-VO_(2))device,which can be reconfigured as synapses or LIF neurons.The ionic dynamic doping contributed to the resistance changes of VO_(2),which enables the reversible modulation of device states.The analog resistance switching and tunable LIF functions were both measured based on the same device to demonstrate the capacity of reconfiguration.Based on the reconfigurable EC-VO_(2),the simulated spiking neural network model exhibited excellent performances by using low-precision weights and tunable output neurons,whose final accuracy reached 91.92%.

High Efficient Reconfigurable and Self Testable Architecture for Sensor Node

Sensor networks are regularly sent to monitor certain physical properties that run in length from divisions of a second to many months or indeed several years.Nodes must advance their energy use for expanding network lifetime.The fault detection of the network node is very significant for guaranteeing the correctness of monitoring results.Due to different network resource constraints and malicious attacks,security assurance in wireless sensor networks has been a difficult task.The implementation of these features requires larger space due to distributed module.This research work proposes new sensor node architecture integrated with a self-testing core and cryptoprocessor to provide fault-free operation and secured data transmission.The proposed node architecture was designed using Verilog programming and implemented using the Xilinx ISE tool in the Spartan 3E environment.The proposed system supports the real-time application in the range of 33 nanoseconds.The obtained results have been compared with the existing Microcontroller-based system.The power consumption of the proposed system consumes only 3.9 mW,and it is only 24%percentage of AT mega-based node architecture.

Cactus-Shaped Frequency Reconfigurable Antenna for Sub 10 GHz Wireless Applications

This paper presents,a novel cactus shaped frequency reconfigurable antenna for sub 10 GHz wireless applications.PIN diode is utilized as an electrical switch to achieve reconfigurability,enabling operation in four different frequency ranges.In the switch ON state mode,the antenna supports 2177-3431 and 6301-8467 MHz ranges.Alternatively,the antenna resonates within 2329-3431 and 4951-6718 MHz while in the OFF state mode.Radiation efficiency values,ranging from 68%to 84%,and gain values,ranging from 1.6 to 4 dB,in the operating frequency bands.the proposed antenna satisfy the practical requirements and expectations.The overall planner dimensions of the proposed antenna model is 40×21 mm^(2).Moreover,the measurement results from the prototype support the simulation results.Based on the frequency ranges supported by the antenna,it can be used for multiple wireless standards and services,including Worldwide interoperability and Microwave Access(WiMAX),Wireless Fidelity(Wi-Fi),Bluetooth,Long Term Evolution(LTE)and satellite communications.This increases its applicability for use in mobile terminals.