This paper studies a strongly convergent inertial forward-backward-forward algorithm for the variational inequality problem in Hilbert spaces.In our convergence analysis,we do not assume the on-line rule of the inerti...This paper studies a strongly convergent inertial forward-backward-forward algorithm for the variational inequality problem in Hilbert spaces.In our convergence analysis,we do not assume the on-line rule of the inertial parameters and the iterates,which have been assumed by several authors whenever a strongly convergent algorithm with an inertial extrapolation step is proposed for a variational inequality problem.Consequently,our proof arguments are different from what is obtainable in the relevant literature.Finally,we give numerical tests to confirm the theoretical analysis and show that our proposed algorithm is superior to related ones in the literature.展开更多
Introduction: Correct adjustment of dry weight after hemodialysis (HD) with no signs of hypervolemia is important. Intradialytic hypotension (IDH) is the most common complication during HD. IDH occurs in 15% to 30% an...Introduction: Correct adjustment of dry weight after hemodialysis (HD) with no signs of hypervolemia is important. Intradialytic hypotension (IDH) is the most common complication during HD. IDH occurs in 15% to 30% and possibly in up to 50% of dialysis sessions. IDH augments mortality essentially due to chronic overhydration and the inability to reach the proper dry weight. On-line hemodiafiltration (ol-HDF) has been reported to reduce the frequency of IDH. The aim of this study was to assess the effect of ol-HDF on hemodynamic stability and dry weight adjustment compared with low-flux HD. Methods: IDH-prone HD patients at our center were enrolled. This study was designed as a crossover trial with two phases (A arm: low-flux HD for 8 weeks followed by ol-HDF for 8 weeks vs. B arm: ol-HDF for 8 weeks followed by low-flux HD for 8 weeks) and two treatment arms (ol-HDF vs. low-flux HD), each phase lasting 8 weeks. We measured the proportion of body water using a body composition monitor (BCM). Results: In a comparison of the systolic blood pressure (SBP) and diastolic blood pressure (DBP) reductions from the baseline blood pressure between the HD and ol-HDF groups, statistically significant differences were observed only in the SBP of the B arm (SBP: HD vs. HDF, -9.83 ± 6.64 vs. -4.62 ± 1.61 mmHg, p = 0.036;DBP: HD vs. HDF, -3.29 ± 4.05 vs. -1.86 ± 1.49 mmHg, p = 0.261). Neither the mean of the interdialytic body weight gains nor the frequency of IDH was different between the A and B arms (p = 0.817 and p = 0.562, respectively). In terms of dialysis modality, there were no significant differences in the amount of overhydration between the conventional HD and ol-HDF groups during the two study phases, as measured by the BCM (A arm: p = 0.875, B arm: p = 0.655). Conclusion: Our study did not show a better benefit of ol-HDF to reach the dry weight compared with low-flux HD in IDH-prone patients.展开更多
The principle and the constitution of an intelligent system for on-line and real-time montitoring tool cutting state were discussed and a synthetic sensors schedule combined a new type fluid acoustic emission sens...The principle and the constitution of an intelligent system for on-line and real-time montitoring tool cutting state were discussed and a synthetic sensors schedule combined a new type fluid acoustic emission sensor (AE) with motor current sensor was presented. The parallel communication between control system of machine tools, the monitoring intelligent system,and several decision-making systems for identifying tool cutting state was established It can auto - matically select the sensor way ,monitoring mode and identifying method in machining process- ing so as to build a successful and effective intelligent system for on -line and real-time moni- toring cutting tool states in FMS.展开更多
This paper introduces the development and industrial application of an on-line corrosion monitoring device for condenser tubes. Corrosion sensors are made up of representative condenser tubes chosen by eddy current te...This paper introduces the development and industrial application of an on-line corrosion monitoring device for condenser tubes. Corrosion sensors are made up of representative condenser tubes chosen by eddy current test, which enable the monitoring result to be consistent with the corrosion of actual condenser tubes. Localized corrosion rate of condenser tubes can be measured indirectly by a galvanic couple made up of tube segments with and without pits. Using this technology, corrosion problems can be found in time and accurately, and anticorrosive measures be made more economic and effective. Applications in two power plants showed the corrosion measurements are fast and accurate.展开更多
The effects of on-line solution, off-line solution and aging heat treatment on the microstructure and hardness of the die-cast AZ91D alloys were investigated. Brinell hardness of die-cast AZ91D alloy increases through...The effects of on-line solution, off-line solution and aging heat treatment on the microstructure and hardness of the die-cast AZ91D alloys were investigated. Brinell hardness of die-cast AZ91D alloy increases through on-line solution and off-line aging treatment but decreases after off-line solution treatment. By X-ray diffractometry, optical microscopy, differential thermal analysis, scanning electron microscopy and X-ray energy dispersive spectroscopy, it is found that the microstructures of the die-cast AZ91D magnesium alloy before and after on-line solution and off-line aging are similar, consisting of α-Mg and β-Al12Mg17. The precipitation of Al element is prevented by on-line solution so that the effect of solid solution strengthening is enhanced. The β-Al12Mg17 phases precipitate from supersaturated Mg solid solution after off-line aging treatment, and lead to microstructure refinement of AZ91D alloy, so the effect of precipitation hardening is enhanced. The β-Al12Mg17 phases dissolve in the substructure after off-line solution treatment, which leads to that the grain boundary strengthening phase is reduced significantly and the hardness of die cast AZ91D is reduced.展开更多
A technique of detecting cutting tool fracture and ultimate wear by si- multaneously monitoring both the spindle motor current and cutting process related acoustic emission(AE)in the cutting process is reported.The te...A technique of detecting cutting tool fracture and ultimate wear by si- multaneously monitoring both the spindle motor current and cutting process related acoustic emission(AE)in the cutting process is reported.The technique can detect breakage of drills having diameter over 0.8mm,turning cutter crack of area over 0.2mm,and the ultimate wear.The principle,system construction,experimental method and result of the technique are discussed.The ratio of success in detection approaches 96% or higher.展开更多
Based on the fact that on-line chat has become the most developing language form in the information age, this article point out the stylistic features of on-line English chat. Though in written language form, such lan...Based on the fact that on-line chat has become the most developing language form in the information age, this article point out the stylistic features of on-line English chat. Though in written language form, such language is spoken language in nature, thus it is worthwhile to analyze this special phaenomenon in lexical and grammatical level.展开更多
Traditional coal mine safety prediction methods are off-line and do not have dynamic prediction functions.The Support Vector Machine(SVM) is a new machine learning algorithm that has excellent properties.The least squ...Traditional coal mine safety prediction methods are off-line and do not have dynamic prediction functions.The Support Vector Machine(SVM) is a new machine learning algorithm that has excellent properties.The least squares support vector machine(LS-SVM) algorithm is an improved algorithm of SVM.But the common LS-SVM algorithm,used directly in safety predictions,has some problems.We have first studied gas prediction problems and the basic theory of LS-SVM.Given these problems,we have investigated the affect of the time factor about safety prediction and present an on-line prediction algorithm,based on LS-SVM.Finally,given our observed data,we used the on-line algorithm to predict gas emissions and used other related algorithm to compare its performance.The simulation results have verified the validity of the new algorithm.展开更多
文摘This paper studies a strongly convergent inertial forward-backward-forward algorithm for the variational inequality problem in Hilbert spaces.In our convergence analysis,we do not assume the on-line rule of the inertial parameters and the iterates,which have been assumed by several authors whenever a strongly convergent algorithm with an inertial extrapolation step is proposed for a variational inequality problem.Consequently,our proof arguments are different from what is obtainable in the relevant literature.Finally,we give numerical tests to confirm the theoretical analysis and show that our proposed algorithm is superior to related ones in the literature.
文摘Introduction: Correct adjustment of dry weight after hemodialysis (HD) with no signs of hypervolemia is important. Intradialytic hypotension (IDH) is the most common complication during HD. IDH occurs in 15% to 30% and possibly in up to 50% of dialysis sessions. IDH augments mortality essentially due to chronic overhydration and the inability to reach the proper dry weight. On-line hemodiafiltration (ol-HDF) has been reported to reduce the frequency of IDH. The aim of this study was to assess the effect of ol-HDF on hemodynamic stability and dry weight adjustment compared with low-flux HD. Methods: IDH-prone HD patients at our center were enrolled. This study was designed as a crossover trial with two phases (A arm: low-flux HD for 8 weeks followed by ol-HDF for 8 weeks vs. B arm: ol-HDF for 8 weeks followed by low-flux HD for 8 weeks) and two treatment arms (ol-HDF vs. low-flux HD), each phase lasting 8 weeks. We measured the proportion of body water using a body composition monitor (BCM). Results: In a comparison of the systolic blood pressure (SBP) and diastolic blood pressure (DBP) reductions from the baseline blood pressure between the HD and ol-HDF groups, statistically significant differences were observed only in the SBP of the B arm (SBP: HD vs. HDF, -9.83 ± 6.64 vs. -4.62 ± 1.61 mmHg, p = 0.036;DBP: HD vs. HDF, -3.29 ± 4.05 vs. -1.86 ± 1.49 mmHg, p = 0.261). Neither the mean of the interdialytic body weight gains nor the frequency of IDH was different between the A and B arms (p = 0.817 and p = 0.562, respectively). In terms of dialysis modality, there were no significant differences in the amount of overhydration between the conventional HD and ol-HDF groups during the two study phases, as measured by the BCM (A arm: p = 0.875, B arm: p = 0.655). Conclusion: Our study did not show a better benefit of ol-HDF to reach the dry weight compared with low-flux HD in IDH-prone patients.
文摘The principle and the constitution of an intelligent system for on-line and real-time montitoring tool cutting state were discussed and a synthetic sensors schedule combined a new type fluid acoustic emission sensor (AE) with motor current sensor was presented. The parallel communication between control system of machine tools, the monitoring intelligent system,and several decision-making systems for identifying tool cutting state was established It can auto - matically select the sensor way ,monitoring mode and identifying method in machining process- ing so as to build a successful and effective intelligent system for on -line and real-time moni- toring cutting tool states in FMS.
文摘This paper introduces the development and industrial application of an on-line corrosion monitoring device for condenser tubes. Corrosion sensors are made up of representative condenser tubes chosen by eddy current test, which enable the monitoring result to be consistent with the corrosion of actual condenser tubes. Localized corrosion rate of condenser tubes can be measured indirectly by a galvanic couple made up of tube segments with and without pits. Using this technology, corrosion problems can be found in time and accurately, and anticorrosive measures be made more economic and effective. Applications in two power plants showed the corrosion measurements are fast and accurate.
基金Projects (2011BAE22B01, 2011BAE22B06) supported by the National Key Technologies R&D Program During the 12th Five-Year Plan Period of ChinaProject (2010NC018) supported by the Innovation Fund of Inner Mongolia University of Science and Technology, China
文摘The effects of on-line solution, off-line solution and aging heat treatment on the microstructure and hardness of the die-cast AZ91D alloys were investigated. Brinell hardness of die-cast AZ91D alloy increases through on-line solution and off-line aging treatment but decreases after off-line solution treatment. By X-ray diffractometry, optical microscopy, differential thermal analysis, scanning electron microscopy and X-ray energy dispersive spectroscopy, it is found that the microstructures of the die-cast AZ91D magnesium alloy before and after on-line solution and off-line aging are similar, consisting of α-Mg and β-Al12Mg17. The precipitation of Al element is prevented by on-line solution so that the effect of solid solution strengthening is enhanced. The β-Al12Mg17 phases precipitate from supersaturated Mg solid solution after off-line aging treatment, and lead to microstructure refinement of AZ91D alloy, so the effect of precipitation hardening is enhanced. The β-Al12Mg17 phases dissolve in the substructure after off-line solution treatment, which leads to that the grain boundary strengthening phase is reduced significantly and the hardness of die cast AZ91D is reduced.
文摘A technique of detecting cutting tool fracture and ultimate wear by si- multaneously monitoring both the spindle motor current and cutting process related acoustic emission(AE)in the cutting process is reported.The technique can detect breakage of drills having diameter over 0.8mm,turning cutter crack of area over 0.2mm,and the ultimate wear.The principle,system construction,experimental method and result of the technique are discussed.The ratio of success in detection approaches 96% or higher.
文摘Based on the fact that on-line chat has become the most developing language form in the information age, this article point out the stylistic features of on-line English chat. Though in written language form, such language is spoken language in nature, thus it is worthwhile to analyze this special phaenomenon in lexical and grammatical level.
文摘Traditional coal mine safety prediction methods are off-line and do not have dynamic prediction functions.The Support Vector Machine(SVM) is a new machine learning algorithm that has excellent properties.The least squares support vector machine(LS-SVM) algorithm is an improved algorithm of SVM.But the common LS-SVM algorithm,used directly in safety predictions,has some problems.We have first studied gas prediction problems and the basic theory of LS-SVM.Given these problems,we have investigated the affect of the time factor about safety prediction and present an on-line prediction algorithm,based on LS-SVM.Finally,given our observed data,we used the on-line algorithm to predict gas emissions and used other related algorithm to compare its performance.The simulation results have verified the validity of the new algorithm.
