Decreasing costs and favorable policies have resulted in increased penetration of solar photovoltaic(PV)power generation in distribution networks.As the PV systems penetration is likely to increase in the future,utili...Decreasing costs and favorable policies have resulted in increased penetration of solar photovoltaic(PV)power generation in distribution networks.As the PV systems penetration is likely to increase in the future,utilizing the reactive power capability of PV inverters to mitigate voltage deviations is being promoted.In recent years,droop control of inverter-based distributed energy resources has emerged as an essential tool for use in this study.The participation of PV systems in voltage regulation and its coordination with existing controllers,such as on-load tap changers,is paramount for controlling the voltage within specified limits.In this work,control strategies are presented that can be coordinated with the existing controls in a distributed manner.The effectiveness of the proposed method was demonstrated through simulation results on a distribution system.展开更多
With the growing demand for precise voltage adjustment and reactive regulation,the frequent operation of on-load tap changers(OLTCs)in oil-immersed systems has led to increased erosion of switch contacts by arcs durin...With the growing demand for precise voltage adjustment and reactive regulation,the frequent operation of on-load tap changers(OLTCs)in oil-immersed systems has led to increased erosion of switch contacts by arcs during the switching process.This erosion causes significant wear on the contacts,thereby reducing their lifespan.Therefore,the present study aims to investigate the behavior and mechanism of arc erosion on contact surfaces in oil-immersed OLTCs.To achieve this,a self-designed friction and wear test device for OLTC contacts was utilized to conduct experiments at various sliding speeds and contact pressures.Additionally,finite element analysis was employed to validate the experimental results regarding the influence of sliding speed on arc energy.The surface morphology of the contacts was observed using an optical microscope.The findings revealed that as the sliding speed increased,the arc energy,arc initiation rate,and contact resistance initially exhibited an upward trend,then decreased,and eventually increased again.The minimum values were observed at a sliding speed of 90 mm/s.Moreover,the arc energy,arc initiation rate,and contact resistance decreased gradually as the contact pressure increased.After reaching a contact pressure of 1.5 N,the variation in the arc energy stabilized.At lower contact pressures,arc erosion dominated the wear on the contact surface.However,at higher contact pressures,the wear transitioned from predominantly arc erosion to a combination of mechanical wear and arc erosion.In summary,experimental and analytical investigations provided insights into the effects of sliding speed and contact pressure on the behavior of arc erosion,contact resistance,and surface damage of OLTC contacts in oil-immersed systems.展开更多
The continuous operation of On-Load Tap-Changers (OLTC) is essential for maintaining stable voltage levels in power transmission and distribution systems. Timely fault detection in OLTC is essential for preventing maj...The continuous operation of On-Load Tap-Changers (OLTC) is essential for maintaining stable voltage levels in power transmission and distribution systems. Timely fault detection in OLTC is essential for preventing major failures and ensuring the reliability of the electrical grid. This research paper proposes an innovative approach that combines voiceprint detection using MATLAB analysis for online fault monitoring of OLTC. By leveraging advanced signal processing techniques and machine learning algorithms in MATLAB, the proposed method accurately detects faults in OLTC, providing real-time monitoring and proactive maintenance strategies.展开更多
变压器有载分接开关(on-load top changer,OLTC)的主要故障类型是机械故障,现有大多数研究仅诊断切换开关故障,难以辨识影响换档全过程的传动机构故障。为准确诊断切换开关与传动机构故障,该文提出一种基于换档全过程振动强度的OLTC机...变压器有载分接开关(on-load top changer,OLTC)的主要故障类型是机械故障,现有大多数研究仅诊断切换开关故障,难以辨识影响换档全过程的传动机构故障。为准确诊断切换开关与传动机构故障,该文提出一种基于换档全过程振动强度的OLTC机械故障诊断方法。首先,将多通道切换开关振动爆发数据转换为时域波形图输入改进的卷积神经网络(convolutional neural network,CNN),以获取池化层特征。然后,提出换档全过程振动强度特征,将换档全过程振动信号划分为多个区间,统计各区间中幅值超过阈值的点数,以表征各时间段平均振动强度。最后,提出一种新的特征处理方法改变以上两种特征的相对大小,并融合两种特征训练分类器诊断机械故障类型。实例分析表明:相比于现有OLTC机械故障诊断方法,所提方法能有效辨识传动机构故障,进一步提升对切换开关故障的诊断精度,具有较强的鲁棒性与泛用性,可为OLTC机械故障诊断研究提供新的思路。展开更多
无励磁分接开关出现放电性故障会严重危害变压器安全运行。介绍了一起500 k V变压器交接试验过程中脉冲局部放电试验异常的案例,应用脉冲电流法、特高频法、超声波法等多维局部放电检测技术进行时差定位,成功诊断了变压器无励磁分接开...无励磁分接开关出现放电性故障会严重危害变压器安全运行。介绍了一起500 k V变压器交接试验过程中脉冲局部放电试验异常的案例,应用脉冲电流法、特高频法、超声波法等多维局部放电检测技术进行时差定位,成功诊断了变压器无励磁分接开关内部异物放电故障;通过材质成分分析判断异物为动触头旋转轴压环的机加工碎屑,异物位于无励磁分接开关动触头旋转轴位置,随挡位切换而移动,导致各个挡位均可检测到局部放电,且脉冲局部放电量随挡位变化而变化。展开更多
At present, an automatic-mechanic contact tap-changer is widely used in power system, but it can not frequently operate. In addition, arc will occur when the switch changes. In order to solve these two problems, this ...At present, an automatic-mechanic contact tap-changer is widely used in power system, but it can not frequently operate. In addition, arc will occur when the switch changes. In order to solve these two problems, this paper presented an automatic on-load voltage-regulating distributing transformer which employed non-contact solid-state relay as tap-changer, and mainly introduced its structure, basic principal, design method of each key link and experimental results. Laboratory simulation experiments informed that the scheme was feasible. It was a smooth and effective experiment device, which was practical in application.展开更多
柔性交流输电系统(flexible alternative current transmission systems,FACTS)装置如混合式统一潮流控制器(hybrid unified power flow controller,HUPFC)可调节线路潮流,有效提升输电网络的传输容量。为解决传统HUPFC中使用机械式有...柔性交流输电系统(flexible alternative current transmission systems,FACTS)装置如混合式统一潮流控制器(hybrid unified power flow controller,HUPFC)可调节线路潮流,有效提升输电网络的传输容量。为解决传统HUPFC中使用机械式有载分接开关调压带来的诸多问题,文中提出基于全电力电子有载分接开关的快速电磁式HUPFC。首先,针对其工作特性进行研究,并提出抑制开关切换过程中产生过压的方法。然后,根据不对称级电压Sen变压器的工作点合成方式存在自由度,实现一种开关切换次数最少的抽头选择策略,并给出从潮流指令改变到开关切换调压的详细步骤。最后,在Simulink中搭建220 kV双回线路仿真模型,对比快速电磁式HUPFC与传统HUPFC的潮流调节过程及结果。结果表明,全电力电子开关在响应速度和降低调节过程中的功率波动等方面更具优势,验证了快速电磁式HUPFC的可行性。展开更多
基金by a project under the scheme entitled“Developing Policies&Adaptation Strategies to Climate Change in the Baltic Sea Region”(ASTRA),Project No.ASTRA6-4(2014-2020.4.01.16-0032).
文摘Decreasing costs and favorable policies have resulted in increased penetration of solar photovoltaic(PV)power generation in distribution networks.As the PV systems penetration is likely to increase in the future,utilizing the reactive power capability of PV inverters to mitigate voltage deviations is being promoted.In recent years,droop control of inverter-based distributed energy resources has emerged as an essential tool for use in this study.The participation of PV systems in voltage regulation and its coordination with existing controllers,such as on-load tap changers,is paramount for controlling the voltage within specified limits.In this work,control strategies are presented that can be coordinated with the existing controls in a distributed manner.The effectiveness of the proposed method was demonstrated through simulation results on a distribution system.
文摘With the growing demand for precise voltage adjustment and reactive regulation,the frequent operation of on-load tap changers(OLTCs)in oil-immersed systems has led to increased erosion of switch contacts by arcs during the switching process.This erosion causes significant wear on the contacts,thereby reducing their lifespan.Therefore,the present study aims to investigate the behavior and mechanism of arc erosion on contact surfaces in oil-immersed OLTCs.To achieve this,a self-designed friction and wear test device for OLTC contacts was utilized to conduct experiments at various sliding speeds and contact pressures.Additionally,finite element analysis was employed to validate the experimental results regarding the influence of sliding speed on arc energy.The surface morphology of the contacts was observed using an optical microscope.The findings revealed that as the sliding speed increased,the arc energy,arc initiation rate,and contact resistance initially exhibited an upward trend,then decreased,and eventually increased again.The minimum values were observed at a sliding speed of 90 mm/s.Moreover,the arc energy,arc initiation rate,and contact resistance decreased gradually as the contact pressure increased.After reaching a contact pressure of 1.5 N,the variation in the arc energy stabilized.At lower contact pressures,arc erosion dominated the wear on the contact surface.However,at higher contact pressures,the wear transitioned from predominantly arc erosion to a combination of mechanical wear and arc erosion.In summary,experimental and analytical investigations provided insights into the effects of sliding speed and contact pressure on the behavior of arc erosion,contact resistance,and surface damage of OLTC contacts in oil-immersed systems.
文摘The continuous operation of On-Load Tap-Changers (OLTC) is essential for maintaining stable voltage levels in power transmission and distribution systems. Timely fault detection in OLTC is essential for preventing major failures and ensuring the reliability of the electrical grid. This research paper proposes an innovative approach that combines voiceprint detection using MATLAB analysis for online fault monitoring of OLTC. By leveraging advanced signal processing techniques and machine learning algorithms in MATLAB, the proposed method accurately detects faults in OLTC, providing real-time monitoring and proactive maintenance strategies.
文摘变压器有载分接开关(on-load top changer,OLTC)的主要故障类型是机械故障,现有大多数研究仅诊断切换开关故障,难以辨识影响换档全过程的传动机构故障。为准确诊断切换开关与传动机构故障,该文提出一种基于换档全过程振动强度的OLTC机械故障诊断方法。首先,将多通道切换开关振动爆发数据转换为时域波形图输入改进的卷积神经网络(convolutional neural network,CNN),以获取池化层特征。然后,提出换档全过程振动强度特征,将换档全过程振动信号划分为多个区间,统计各区间中幅值超过阈值的点数,以表征各时间段平均振动强度。最后,提出一种新的特征处理方法改变以上两种特征的相对大小,并融合两种特征训练分类器诊断机械故障类型。实例分析表明:相比于现有OLTC机械故障诊断方法,所提方法能有效辨识传动机构故障,进一步提升对切换开关故障的诊断精度,具有较强的鲁棒性与泛用性,可为OLTC机械故障诊断研究提供新的思路。
文摘无励磁分接开关出现放电性故障会严重危害变压器安全运行。介绍了一起500 k V变压器交接试验过程中脉冲局部放电试验异常的案例,应用脉冲电流法、特高频法、超声波法等多维局部放电检测技术进行时差定位,成功诊断了变压器无励磁分接开关内部异物放电故障;通过材质成分分析判断异物为动触头旋转轴压环的机加工碎屑,异物位于无励磁分接开关动触头旋转轴位置,随挡位切换而移动,导致各个挡位均可检测到局部放电,且脉冲局部放电量随挡位变化而变化。
文摘At present, an automatic-mechanic contact tap-changer is widely used in power system, but it can not frequently operate. In addition, arc will occur when the switch changes. In order to solve these two problems, this paper presented an automatic on-load voltage-regulating distributing transformer which employed non-contact solid-state relay as tap-changer, and mainly introduced its structure, basic principal, design method of each key link and experimental results. Laboratory simulation experiments informed that the scheme was feasible. It was a smooth and effective experiment device, which was practical in application.
文摘柔性交流输电系统(flexible alternative current transmission systems,FACTS)装置如混合式统一潮流控制器(hybrid unified power flow controller,HUPFC)可调节线路潮流,有效提升输电网络的传输容量。为解决传统HUPFC中使用机械式有载分接开关调压带来的诸多问题,文中提出基于全电力电子有载分接开关的快速电磁式HUPFC。首先,针对其工作特性进行研究,并提出抑制开关切换过程中产生过压的方法。然后,根据不对称级电压Sen变压器的工作点合成方式存在自由度,实现一种开关切换次数最少的抽头选择策略,并给出从潮流指令改变到开关切换调压的详细步骤。最后,在Simulink中搭建220 kV双回线路仿真模型,对比快速电磁式HUPFC与传统HUPFC的潮流调节过程及结果。结果表明,全电力电子开关在响应速度和降低调节过程中的功率波动等方面更具优势,验证了快速电磁式HUPFC的可行性。
