According to the valve port features of high speed on-off valve and its actions, the valve port can be simplified into an a-type half bridge construction. A method that tests the dynamic characteristics of the high sp...According to the valve port features of high speed on-off valve and its actions, the valve port can be simplified into an a-type half bridge construction. A method that tests the dynamic characteristics of the high speed on-off valve by the output pressure signal of the a-type half bridge is proposed. Having analyzed the factors related to the dynamic characteristics of an a-type half bridge, a rule for designing the outlet chamber＇s volume is worked out. According to the rule, a test stand is built to test the self-developed high-speed on-off valve. From the test results, it can be seen that with the outlet chamber＇s volume controlled by the rule the rise time of the pressure signals driven by signals with different frequencies changes very little. The test results conform to the simulation results, which nroves the correctness of the method.展开更多
Considering spectrum tilt due to signal-to-signal Raman scattering (SSRS) in backward distributed fiber Raman amplifiers (B-DFRA),an inverse tilted on-off gain profile is adopted to achieve flat net gain.A simple appr...Considering spectrum tilt due to signal-to-signal Raman scattering (SSRS) in backward distributed fiber Raman amplifiers (B-DFRA),an inverse tilted on-off gain profile is adopted to achieve flat net gain.A simple approximate linear relationship of pump power at each wavelength versus on-off gain level and tilt was derived numerically and experimentally so that a novel control method was established.Since there are only 3 pre-determinable constants required for individual pump wave,it is easy to be realized.As an example,maximum errors less than 0.2 and 0.4 dB respectively for average gain and gain tilt were achieved over C+L band in 100-km back-pumped standard single-mode fiber (SMF) experimentally.展开更多
文摘According to the valve port features of high speed on-off valve and its actions, the valve port can be simplified into an a-type half bridge construction. A method that tests the dynamic characteristics of the high speed on-off valve by the output pressure signal of the a-type half bridge is proposed. Having analyzed the factors related to the dynamic characteristics of an a-type half bridge, a rule for designing the outlet chamber＇s volume is worked out. According to the rule, a test stand is built to test the self-developed high-speed on-off valve. From the test results, it can be seen that with the outlet chamber＇s volume controlled by the rule the rise time of the pressure signals driven by signals with different frequencies changes very little. The test results conform to the simulation results, which nroves the correctness of the method.
文摘Considering spectrum tilt due to signal-to-signal Raman scattering (SSRS) in backward distributed fiber Raman amplifiers (B-DFRA),an inverse tilted on-off gain profile is adopted to achieve flat net gain.A simple approximate linear relationship of pump power at each wavelength versus on-off gain level and tilt was derived numerically and experimentally so that a novel control method was established.Since there are only 3 pre-determinable constants required for individual pump wave,it is easy to be realized.As an example,maximum errors less than 0.2 and 0.4 dB respectively for average gain and gain tilt were achieved over C+L band in 100-km back-pumped standard single-mode fiber (SMF) experimentally.
