Intelligent responsive self-assembled micro-nanocapsules:Used to delay gel gelation time

In the application of polymer gels to profile control and water shutoff,the gelation time will directly determine whether the gel can"go further"in the formation,but the most of the methods for delaying gel gelation time are complicated or have low responsiveness.There is an urgent need for an effective method for delaying gel gelation time with intelligent response.Inspired by the slow-release effect of drug capsules,this paper uses the self-assembly effect of gas-phase hydrophobic SiO_(2) in aqueous solution as a capsule to prepare an intelligent responsive self-assembled micro-nanocapsules.The capsule slowly releases the cross-linking agent under the stimulation of external conditions such as temperature and pH value,thus delaying gel gelation time.When the pH value is 2 and the concentration of gas-phase hydrophobic SiO_(2) particles is 10%,the gelation time of the capsule gel system at 30,60,90,and 120℃is12.5,13.2,15.2,and 21.1 times longer than that of the gel system without containing capsule,respectively.Compared with other methods,the yield stress of the gel without containing capsules was 78 Pa,and the yield stress after the addition of capsules was 322 Pa.The intelligent responsive self-assembled micronanocapsules prepared by gas-phase hydrophobic silica nanoparticles can not only delay the gel gelation time,but also increase the gel strength.The slow release of cross-linking agent from capsule provides an effective method for prolongating the gelation time of polymer gels.

The IDD Transcription Factors:Their Functions in Plant Development and Environmental Response

INDETERMINATE-DOMAIN proteins(IDDs)are a plant-specific transcription factor family characterized by a conserved ID domain with four zinc finger motifs.Previous studies have demonstrated that IDDs coordinate a diversity of physiological processes and functions in plant growth and development,including floral transition,plant architecture,seed and root development,and hormone signaling.In this review,we especially summarized the latest knowledge on the functions and working models of IDD members in Arabidopsis,rice,and maize,particularly focusing on their role in the regulatory network of biotic and abiotic environmental responses,such as gravity,temperature,water,and pathogens.Understanding these mechanisms underlying the function of IDD proteins in these processes is important for improving crop yields by manipulating their activity.Overall,the review offers valuable insights into the functions and mechanisms of IDD proteins in plants,providing a foundation for further research and potential applications in agriculture.

An Improved Text-Based and Image-Based CAPTCHA Based on Solving and Response Time

CAPTCHA is an acronym that stands for Completely Automated Public Turing Test to tell Computers and Humans Apart(CAPTCHA),it is a good example of an authentication system that can be used to determine the true identity of any user.It serves as a security measure to prevent an attack caused by web bots(automatic programs)during an online transaction.It can come as text-based or image-based depending on the project and the programmer.The usability and robustness,as well as level of security,provided each of the varies and call for the development of an improved system.Hence,this paper studied and improved two different CAPTCHA systems(the text-based CAPTCHA and image-based CAPTCHA).The textbased and image-based CAPTCHAwere designed using JavaScript.Response time and solving time are the two metrics used to determine the effectiveness and efficiency of the two CAPTCHA systems.The inclusion of response time and solving time improved the shortfall of the usability and robustness of the existing system.The developed system was tested using 200 students from the Federal College of Animal Health and Production Technology.The results of each of the participants,for the two CAPTCHAs,were extracted from the database and subjected to analysis using SPSS.The result shows that textbased CAPTCHAhas the lowest average solving time(21.3333 s)with a 47.8%success rate while image-based CAPTCHA has the highest average solving time was 23.5138 s with a 52.8%success rate.The average response time for the image-based CAPTCHA was 2.1855 s with a 37.9%success rate lower than the text-based CAPTCHA response time(3.5561 s)with a 62.1%success rate.This indicates that the text-based CAPTCHA is more effective in terms of usability tests while image-based CAPTCHA is more efficient in terms of system responsiveness and recommended for potential users.

The Application of Information Systems to Improve Ambulance Response Times in the UK

Emergency ambulance services in the UK are tasked with providing pre-hospital patient care and clinical services with a target response time between call connect to on-scene attendance.In 2017,NHS England introduced four new response time categories based on patient needs.The most challenging is to be on-scene for a life-threatening situation within seven minutes of the call being connected when such calls are random in terms of time and place throughout a large territory.Recent evidence indicates emergency ambulance services regularly fall short of achieving the target ambulance response times set by the National Health Service(NHS).To achieve these targets,they need to undertake transformational change and apply statistical,operations research and artificial intelligence techniques in the form of five separate modules covering demand forecasting,plus locate,allocate,dispatch,monitoring and re-deployment of resources.These modules should be linked in real-time employing a data warehouse to minimise computational data and generate accurate,meaningful and timely decisions ensuring patients receive an appropriate and timely response.A simulation covering a limited geographical area,time and operational data concluded that this form of integration of the five modules provides accurate and timely data upon which to make decisions that effectively improve ambulance response times.

Analysis of response time probability distribution of workflows

An evaluation approach for the response time probability distribution of workflows based on the fluid stochastic Petri net formalism is presented. Firstly, some problems about stochastic workflow net modeling are discussed. Then how to convert a stochastic workflow net model into a fluid stochastic Petri net model is described. The response time distribution can be obtained directly upon the transient state solution of the fluid stochastic Petri net model. In the proposed approach, there are not any restrictions on the structure of workflow models, and the processing times of workflow tasks can be modeled by using arbitrary probability distributions. Large workflow models can be efficiently tackled by recursively using a net reduction technique.

Time Domain Simulation of Transient Responses of Very Large Floating Structures Under Unsteady External Loads

A time domain finite element method （FEM） for the analysis of transient elastic response of a very large floating structure （VLFS） subjected to arbitrary time-dependent external loads is presented. This method is developed directly in time domain and the hydrodynamic problem is formulated based on linear, inviscid and slightly compressible fluid theory and the structural response is analyzed on the thin plate assumption. The time domain finite element procedure herein is validated by comparing numerical results with available experimental data. Finally, the transient elastic response of a pontoon-type VLFS under the landing of an airplane is computed by the proposed time domain FEM. The time histories of the applied force and the position and velocity of an airplane during landing are modeled with data from a Boeing 747-400 jumbo jet.

Factors Influencing the Emergency Medical Service Response Time for Cardiovascular Disease in Guangzhou, China

While emergency medical service (EMS) response time (ERT) is a major factor associated with the survival of patients with cardiovascular disease (CVD), relatively few studies have explored the factors associated with ERT. This study aimed to assess the current status of ERT and to identify the factors affecting ERT in patients with CVD in China. Between January 1, 2011 and December 31, 2015, EMS responses to CVD incidents in Guangzhou, China, were examined. The primary outcome was ERT, defined as the time from receipt of an emergency call to the arrival of paramedics on the scene. Factors associated with ERT were evaluated by multivariable logistic regression. A total of 44 383 CVD incidents were analysed. The median ERT was 12.58 min (interquartile range=9.98-15.67). Among the risk factors, distance (OR=13.73, 95% CI=11.76- 16.04), level of hospital (OR=1.57, 95% CI=1.40-1.75), and site of the incident (OR=1.53, 95% CI=1.38-1.69) were the top three significant factors affecting the ERT. Our results suggest that greater attention should be given to factors affecting the ERT. It is essential to make continuous efforts to promote the development of effective interventions to reduce the response time.

The time reversal effect of the impulse response of crust

In this paper, the time reversal processes of impulse response of crust are simulated by means of a dynamical finite element method (DFEM). The results indicate that a small undulating load during a long period may cause a focused brevity impact in a chaos-response system. The physical principle for this phenomenon is that the wave interferes or multiples superposition. Based on this knowledge, a new view toward the mechanism for preparing and triggering an earthquake is proposed. Finally, an interpretation of crust response to the sea tides is given.

Aggregator-based demand response mechanism for electric vehicles participating in peak regulation in valley time of receiving-end power grid

With the increase in the power receiving proportion and an insufficient peak regulation capacity of the local units, the receiving-end power grid struggles to achieve peak regulation in valley time. To solve this problem while considering the potential of the large-scale charge load of electric vehicles(EVs), an aggregator-based demand response(DR) mechanism for EVs that are participating in the peak regulation in valley time is proposed in this study. In this aggregator-based DR mechanism, the profits for the power grid’s operation and the participation willingness of the EV owners are considered. Based on the characteristics of the EV charging process and the day-ahead unit generation scheduling, a rolling unit commitment model with the DR is established to maximize the social welfare. In addition, to improve the efficiency of the optimization problem solving process and to achieve communication between the independent system operator(ISO) and the aggregators, the clustering algorithm is utilized to extract typical EV charging patterns. Finally, the feasibility and benefits of the aggregator-based DR mechanism for saving the costs and reducing the peak-valley difference of the receiving-end power grid are verified through case studies.

Coseismic site response and slope instability using periodic boundary conditions in the material point method

This paper proposed the explicit generalized-a time scheme and periodic boundary conditions in the material point method(MPM)for the simulation of coseismic site response.The proposed boundary condition uses an intuitive particle-relocation algorithm ensuring material points always remain within the computational mesh.The explicit generalized-a time scheme was implemented in MPM to enable the damping of spurious high frequency oscillations.Firstly,the MPM was verified against finite element method(FEM).Secondly,ability of the MPM in capturing the analytical transfer function was investigated.Thirdly,a symmetric embankment was adopted to investigate the effects of ground motion arias intensity(I_(a)),geometry dimensions,and constitutive models.The results show that the larger the model size,the higher the crest runout and settlement for the same ground motion.When using a Mohr-Coulomb model,the crest runout increases with increasing I_(a).However,if the strain-softening law is activated,the results are less influenced by the ground motion.Finally,the MPM results were compared with the Newmark sliding block solution.The simplified analysis herein highlights the capabilities of MPM to capture the full deformation process for earthquake engineering applications,the importance of geometry characterization,and the selection of appropriate constitutive models when simulating coseismic site response and subsequent large deformations.

Finite Difference Solution of Response Time Delay of Magneto-rhelological Damper

Magneto-rhelological（MR） dampers are devices that employ rheological fluids to modify their mechanical properties. Their mechanical simplicity, high dynamic range, lower power requirements, large force capacity, robustness and safe maimer of operation in cases of failure have made them attractive devices for semi-active real-time control in civil, aerospace and automotive applications. Time response characteristic is one of the most important technical performances of MR dampers, and response time directly affects the control frequency, application range and the actual effect of MR dampers. In this study, one kind of finite difference solution for predicting the response time ofmagneto-rheological dampers from ＂off-state＂ to ＂on-state＂ is put forward. A laminar flow model is used to describe the flow in the MR valve, and a bi-viscous fluid flow model is utilized to describe the relationship of shear stress and shear rate of MR fluid. An explicit difference format is used to diseretize the Novior-Stoks equation, and stability condition of this algorithm is built by Von-Neumann stability criterion. The pressure gradient along the flow duct is solved by a dichotomy algorithm with iteration, and the changing curve of the damping force versus time of MR damper is obtained as well. According to the abovementioned numerical algorithm, the damping forces versus time curves from ＂off-state＂ to ＂on-state＂ of a cylindrical piston type MR damper are computed. Moreover, the MR damper is installed in a material test system（MTS）, the magnetic field in the wire circles of the MR damper is ＂triggered＂ when the MR damper is imposed to do a constant speed motion, and the damping force curves are recorded. The comparison between numerical results and experimental results indicates that this finite difference algorithm can be used to estimate the response time delay of MR dampers.

A GIS-Based Decision Support System for Reducing Air Ambulance Response Times: A Case Study on Public Schools in Jeddah City

In injuries reducing ambulance response time (time from injury to hospital arrival) is an important factor for saving people’s lives. Helicopter emergency medical services can reduce out-of-hospital transport times because of their high speed and their ability to travel in straight paths?unlike ground ambulance which are restricted to road network paths, as well as the ability toaccess rural or remote area injuries that are difficult to reach by ground ambulance. GIS technology aids air ambulance movement planning to reduce out-of-hospital response time based on mathematical and geographic models to support decision making which is necessary from out-of-hospital care providers. The goal of this study is to use GIS to develop an efficient DSS to outline where air ambulance can reduce response times, by using spatial analysis tools to create Euclidean distance and direction zones around receiving hospitals. The study concludes that GIS technology can be used to develop an efficient DSS to outline where air ambulance can reduce response times, by creating surfaces of Euclidean allocation, direction, and distance that can be used to improve initial response times for the civil defense air rescue and air ambulance services.

Fork-Join program response time on multiprocessors with exchangeable join

The Fork-Join program consisting of K parallel tasks is a useful model for a large number of computing applications. When the parallel processor has multi-channels, later tasks may finish execution earlier than their earlier tasks and may join with tasks from other programs. This phenomenon is called exchangeable join (EJ), which introduces correlation to the task’s service time. In this work, we investigate the response time of multiprocessor systems with EJ with a new approach. We analyze two aspects of this kind of systems: exchangeable join (EJ) and the capacity constraint (CC). We prove that the system response time can be effectively reduced by EJ, while the reduced amount is constrained by the capacity of the multiprocessor. An upper bound model is constructed based on this analysis and a quick estimation algorithm is proposed. The approximation formula is verified by extensive simulation results, which show that the relative error of approximation is less than 5%.

Time history of seismic earth pressure response from gravity retaining wall based on energy dissipation

The seismic design of gravity retaining walls is based mostly on the pseudo static method.The seismic earth pressure is assumed to be a constant without considering the wave traveling effect when the seismic wave propagates through the slope.However,under continuous ground motion,the actual earth pressure on the retaining wall varies with time.The present seismic earth pressure calculation method yields results that differ significantly from the actual scenario.Considering this,a slip surface curve was assumed in this study.It is more suitable for engineering practice.In addition,a theoretical calculation model based on energy dissipation was established.The time history of seismic earth pressure response under continuous ground motion was calculated using the equilibrium equation between the external power and the internal energy dissipation power of the sliding soil wedge.It can more effectively reflect the stress scenario of a retaining wall under seismic conditions.To verify the applicability of the proposed approach,a large-scale shaking table test was conducted,and the time history of the seismic earth pressure response obtained from the experiment was compared with the calculation results.The results show that the proposed approach is applicable to the calculation of the time history of seismic earth pressure response of gravity retaining walls.This lays the foundation for the seismic design of retaining structures by using dynamic time history.

Estimation of Concrete Arch Dams Responses in Linear Domain Using Endurance Time Analysis Method

In this paper, Endurance Time Analysis （ETA） method which is a new time-history based dynamic pushover procedure is introduced and its application in linear analysis of concrete arch dams is investigated. In this method the structure is subjected to gradually intensifying acceleration functions and its performance is evaluated based on the length of the time duration that can satisfy required performance criteria. For this purpose Dez arch dam is selected as case study, fluid-structure interaction is taken into account and F.E. model of the system is excited in three performance levels. ETA method gives an approximation of maximum response at the equivalent target time, resulted from analyzing the system based on natural records. Extracted results are displacement, velocity and acceleration of the crest at crown cantilever. Results show using of ETA method can reduce at least 50% in number of analyses and 70% in total time of analyses at the current case. Furthermore, it is found that although the results of the ETA are not exactly consistent with the results of time-history analyses using real ground motions, errors are reasonable and ETA can identify performance levels of the dam with acceptable accuracy.

Time-frequency response spectrum of rotational ground motion and its application

The rotational seismic motions are estimated from one station records of the 1999 Jiji （Chi-Chi）, Taiwan, earthquake based on the theory of elastic plane wave propagation. The time-frequency response spectrum （TFRS） of the rotational motions is calculated and its characteristics are analyzed, then the TFRS is applied to analyze the damage mechanism of one twelve-storey frame concrete structure. The results show that one of the ground motion components can not reflect the characteristics of the seismic motions completely; the characteristics of each component, especially rotational motions, need to be studied. The damage line of the structure and TFRS of ground motion are important for seismic design, only the TFRS of input seismic wave is suitable, the structure design is reliable.

The simulation of temperature dependence of responsivity and response time for 6H-SiC UV photodetector

In this paper the temperature dependence of responsivity and response time for 6H-SiC ultraviolet （UV） photodetector is simulated based on numerical model in the range from 300 K to 900 K. The simulation results show that the responsivity and the response time of device are less sensitive to temperature and this kind of UV photodetector has excellent temperature stability. Also the effects of device structure and bias voltage on the responsivity and the response time are presented. The thicker the drift region is, the higher the responsivity and the longer the response time are. So the thickness of drift region has to be carefully designed to make trade-off between responsivity and response time.

The Response Time Analysis of Digital Broadcasting System

Digital broadcasting system has become a high-light of research on computer application. To respond to the changes of the playbill in the broadcasting system in real time, the response time of the system must be studied. There is scarcely the research on this area currently. The influence factors in the response time are analyzed; the model on the response time of the system service is built; how the influence factors affect the response time of the system service is validated; and four improvement measures are proposed to minimize the response time of system service.

Response time of variable transparency glass and its application to welding goggles

The behavior of variable transparency glass is studied, and the response time analyzed and measured aimed at applications to welding goggles. Detection apparatus for goggle testing is involved in the design and development. Charac-teristics of the apparatus are discussed based on experiments. The definition of nominal response time and effective response time are presented based on the analysis and calculation with experimental data.

Analysis of Time and Frequency Domain of Auditory Brainstem Response in Normal Guinea Pigs

The auditory brainstem response (ABR) was measured for 90 cars of norml gui-nea pigs,from which the mean latency,amplitude and recognition of waves were obtain-ded.The waves were classified into six types,with wave Ⅲ as the main wave which ac-counted for 77.1% of all the waves.The frequency domain of each type was analysed bymeans of digital filtering and auto-regressive (AR)estimation.The main frequency com-position of ABR in the guinea pigs was restricted within 1600 Hz,in which there werethree peaks at AR spectrum,the mean value of the peaks being 107.33 Hz,566.67 Hzand 1076 Hz respectively.The AR spectrograms of all types waves were very similar toeach other.