One-dimensional (1D) ZnO was prepared through hydrothermal synthesis by cetyltrimethylammonium bromide (CTAB) controling its morphology.The products were characterized by X-ray diffraction (XRD),transmission electron ...One-dimensional (1D) ZnO was prepared through hydrothermal synthesis by cetyltrimethylammonium bromide (CTAB) controling its morphology.The products were characterized by X-ray diffraction (XRD),transmission electron microscopy (TEM) and scanning electron microscopy (SEM).The sintered gas sensor was prepared using ZnO nanorods and its gas sensitivity was measured in static gas atmosphere.The result showed that the ZnO nanorods had lower working temperature than granulated ZnO and had very good sensitivity to 10μg/g trimethylamine (TMA),methanol,ammonia, acetone and ethanol at the working temperature of 170℃.SEM picture revealed that there were many multi-pores in the surface of the sensors.These multi-pores might help to absorb gases and improve the gas sensitivity.展开更多
Semiconductor nanowires, with their unique capability to bridge the nanoscopic and macroscopic worlds, have been demonstrated to have potential applications in energy conversion, electronics, optoelectronics, and bios...Semiconductor nanowires, with their unique capability to bridge the nanoscopic and macroscopic worlds, have been demonstrated to have potential applications in energy conversion, electronics, optoelectronics, and biosensing devices. Onedimensional（1D） ZnO nanostructures, with coupled semiconducting and piezoelectric properties, have been extensively investigated and widely used to fabricate nanoscale optoelectronic devices. In this article, we review recent developments in 1D ZnO nanostructure based photodetectors and device performance enhancement by strain engineering piezoelectric polarization and interface modulation. The emphasis is on a fundamental understanding of electrical and optical phenomena, interfacial and contact behaviors, and device characteristics. Finally, the prospects of 1D ZnO nanostructure devices and new challenges are proposed.展开更多
A focus of the current nanotechnology has shifted from routine fabrication of nanostructures to designing functional electronic devices and realizing their immense potentials for applications. Due to infusion of multi...A focus of the current nanotechnology has shifted from routine fabrication of nanostructures to designing functional electronic devices and realizing their immense potentials for applications. Due to infusion of multi-functionality into a single system, the utilization of hetero-, core/shell and hierarchical nanostructures has become the key issue for building such devices. ZnS, due to its direct wide bandgap, high index of refraction, high transparency in the visible range and intrinsic polarity, is one of the most useful semiconductors for a wide range of electronics applications. This article provides a dense review of the state-of-the-art research activities in one-dimensional （1D） ZnS-based hetero-, core/shell and hierarchical nanostructures. The particular emphasis is put on their syntheses and applications.展开更多
In this review, the progress made during the last two years with respect to the syntheses and novel properties of one-dimensional （1D） ZnS nanostructures is presented. Primarily the research on 1D ZnS nanostructures...In this review, the progress made during the last two years with respect to the syntheses and novel properties of one-dimensional （1D） ZnS nanostructures is presented. Primarily the research on 1D ZnS nanostructures has been of growing interest owing to their promising applications in nanoscale optoelectronic devices. Diverse 1D ZnS nanostructures with delicately-tuned morphologies, sizes, and microstructures have been synthesized through relatively simple and well-controlled techniques. Some novel properties of the nanomaterials have been explored and the relationships between their structural features and functions have been understood gradually.展开更多
In this paper,numerical experiments are carried out to investigate the impact of penalty parameters in the numerical traces on the resonance errors of high-order multiscale discontinuous Galerkin(DG)methods(Dong et al...In this paper,numerical experiments are carried out to investigate the impact of penalty parameters in the numerical traces on the resonance errors of high-order multiscale discontinuous Galerkin(DG)methods(Dong et al.in J Sci Comput 66:321–345,2016;Dong and Wang in J Comput Appl Math 380:1–11,2020)for a one-dimensional stationary Schrödinger equation.Previous work showed that penalty parameters were required to be positive in error analysis,but the methods with zero penalty parameters worked fine in numerical simulations on coarse meshes.In this work,by performing extensive numerical experiments,we discover that zero penalty parameters lead to resonance errors in the multiscale DG methods,and taking positive penalty parameters can effectively reduce resonance errors and make the matrix in the global linear system have better condition numbers.展开更多
文摘One-dimensional (1D) ZnO was prepared through hydrothermal synthesis by cetyltrimethylammonium bromide (CTAB) controling its morphology.The products were characterized by X-ray diffraction (XRD),transmission electron microscopy (TEM) and scanning electron microscopy (SEM).The sintered gas sensor was prepared using ZnO nanorods and its gas sensitivity was measured in static gas atmosphere.The result showed that the ZnO nanorods had lower working temperature than granulated ZnO and had very good sensitivity to 10μg/g trimethylamine (TMA),methanol,ammonia, acetone and ethanol at the working temperature of 170℃.SEM picture revealed that there were many multi-pores in the surface of the sensors.These multi-pores might help to absorb gases and improve the gas sensitivity.
基金Project supported by the National Major Research Program of China(Grant No.2013CB932602)the National Key Research and Development Program of China(Grant No.2016YFA0202701)+6 种基金the Program of Introducing Talents of Discipline to Universities,China(Grant No.B14003)the National Natural Science Foundation of China(Grant Nos.51527802,51232001,51602020,51672026,and 51372020)China Postdoctoral Science Foundation(Grant Nos.2015M580981 and 2016T90033)Beijing Municipal Science&Technology Commission,Chinathe State Key Laboratory for Advanced Metals and Materials,China(Grant No.2016Z-06)the Fundamental Research Funds for the Central Universities,ChinaJST in Japan,Research and Education Consortium for Innovation of Advanced Integrated Science
文摘Semiconductor nanowires, with their unique capability to bridge the nanoscopic and macroscopic worlds, have been demonstrated to have potential applications in energy conversion, electronics, optoelectronics, and biosensing devices. Onedimensional（1D） ZnO nanostructures, with coupled semiconducting and piezoelectric properties, have been extensively investigated and widely used to fabricate nanoscale optoelectronic devices. In this article, we review recent developments in 1D ZnO nanostructure based photodetectors and device performance enhancement by strain engineering piezoelectric polarization and interface modulation. The emphasis is on a fundamental understanding of electrical and optical phenomena, interfacial and contact behaviors, and device characteristics. Finally, the prospects of 1D ZnO nanostructure devices and new challenges are proposed.
基金World Premier International Research Center Initiative(WPI Initiative)on Materials Nanoarchitronics,MEXT,Japanthe Japan Society for the Promotion of Science (JSPS)for a support in the form of a fellowship tenable at the National Institute for Materials Science,Tsukuba,Japan.
文摘A focus of the current nanotechnology has shifted from routine fabrication of nanostructures to designing functional electronic devices and realizing their immense potentials for applications. Due to infusion of multi-functionality into a single system, the utilization of hetero-, core/shell and hierarchical nanostructures has become the key issue for building such devices. ZnS, due to its direct wide bandgap, high index of refraction, high transparency in the visible range and intrinsic polarity, is one of the most useful semiconductors for a wide range of electronics applications. This article provides a dense review of the state-of-the-art research activities in one-dimensional （1D） ZnS-based hetero-, core/shell and hierarchical nanostructures. The particular emphasis is put on their syntheses and applications.
基金World Premier International Research Center Initiative(WPI Initiative)on Materials Nanoarchitronics,MEXT,Japanthe Japan Society for the Promotion of Science (JSPS)for a support in the form of a fellowship tenable at the National Institute for Materials Science,Tsukuba,Japan.
文摘In this review, the progress made during the last two years with respect to the syntheses and novel properties of one-dimensional （1D） ZnS nanostructures is presented. Primarily the research on 1D ZnS nanostructures has been of growing interest owing to their promising applications in nanoscale optoelectronic devices. Diverse 1D ZnS nanostructures with delicately-tuned morphologies, sizes, and microstructures have been synthesized through relatively simple and well-controlled techniques. Some novel properties of the nanomaterials have been explored and the relationships between their structural features and functions have been understood gradually.
基金supported by the National Science Foundation grant DMS-1818998.
文摘In this paper,numerical experiments are carried out to investigate the impact of penalty parameters in the numerical traces on the resonance errors of high-order multiscale discontinuous Galerkin(DG)methods(Dong et al.in J Sci Comput 66:321–345,2016;Dong and Wang in J Comput Appl Math 380:1–11,2020)for a one-dimensional stationary Schrödinger equation.Previous work showed that penalty parameters were required to be positive in error analysis,but the methods with zero penalty parameters worked fine in numerical simulations on coarse meshes.In this work,by performing extensive numerical experiments,we discover that zero penalty parameters lead to resonance errors in the multiscale DG methods,and taking positive penalty parameters can effectively reduce resonance errors and make the matrix in the global linear system have better condition numbers.
基金supported by the Jiangsu Province Industry–University–Research Project,China(No.BY20221160)the Postgraduate Research and Practice Innovation Program of Jiangsu Province,China(No.KYCX22_3798)+2 种基金the National Natural Science Foundation of China(No.52275339)the Key Research and Development Plan of the Ministry of Science and Technology,China(No.2023YFE0200400)the Science and Technology Project of Jiangsu Province,China(No.BZ2021053)。
