Design of(GO/TiO2)N one-dimensional photonic crystal photocatalysts with improved photocatalytic activity for tetracycline degradation

(GO/TiO2)N(GO represents graphene oxide,and N represents the period number of alternate superposition of two dielectrics)onedimensional photonic crystal with different lattice constants was prepared via the sol–gel technique,and its transmission characteristics for photocatalysis were tested.The results show that the lattice constant,filling ratio,number of periodic layers,and incident angle had effects on the band gap.When the lattice constant,filling ratio,number of periodic layers,and incident angle were set to 125 nm,0.45,21,and 0°,respectively,a gap width of 53 nm appeared at the central wavelength(322 nm).The absorption peak of the photocatalyst at 357 nm overlapped the blue edge of the photonic band gap.A slow photon effect region above 96%reflectivity appeared.The degradation rate of tetracycline in(GO/TiO2)N photonic crystal was enhanced to 64%within 60 min.Meanwhile,the degradation efficiency of(GO/TiO2)N one-dimensional photonic crystal was effectively improved compared with those of the GO/TiO2 composite film and GO/TiO2 powder.

Description and reconstruction of one-dimensional photonic crystal by digital signal processing theory

A method of describing one-dimensional photonic crystals （1DPCs） based on Z-domain digital signal processing theory is presented. The analytical expression of the target band gap spectrum in the digital domain is obtained by the autocorrelation of its impulse response. The feasibility of this method is verified by reconstructing two simple 1DPC structures with a target photonic band gap obtained by the traditional transfer matrix method. This method provides an effective approach to function-guided designs of interference-based band gap structures for photonic applications.

Controlling the Bandgaps of One-Dimensional TiO2/SiO2, TiO2/SnO2, and SiO2/SnO2 Photonic Crystals Using the Transfer Matrix Method

One-dimensional photonic crystals (1D PhCs) have a unique ability to control the propagation of light waves, however certain classes of 1D oxides remain relatively unexplored for use as PhCs. Specifically, there has not been a comparative study of the three different 1D PhC structures to compare the influence of layer thickness, number, and refractive index on the ability of the PhCs to control light transmission. Herein, we use the transfer matrix method (TMM) to theoretically examine the transmission of 1D PhCs composed of layers of TiO2/SiO2, TiO2/SnO2, SiO2/SnO2, and combinations of the three with various top and bottom layer thicknesses to cover a substantial region of the electromagnetic spectrum (UV to NIR). With increasing layer numbers for TiO2/SiO2 and SiO2/SnO2, the edges became sharper and wider and the photonic bandgap width increased. Moreover, we demonstrated that PhCs with significantly thick TiO2/SiO2 layers had a high transmittance for a wide bandgap, allowing for wide-band optical filter applications. These different PhC architectures could enable a variety of applications, depending on the properties needed.

Flexible one-dimensional photonic crystal films composed of chalcogenide glass and water-soluble polymer for curvature sensing

Curvature sensing plays an important role in structural health monitoring,damage detection,real-time shape control,modification,etc.Developing curvature sensors with large measurement ranges,high sensitivity,and linearity remains a major challenge.In this study,a curvature sensor based on flexible one-dimensional photonic crystal(1D-PC)films was proposed.The flexible 1D-PC films composed of dense chalcogenide glass and water-soluble polymer materials were fabricated by solution processing.The flexible 1D-PC film curvature sensor has a wide measurement range of 33-133 m-1and a maximum sensitivity of0.26 nm/m^(-1).The shift of the transmission peak varies approximately linearly with the curvature in the entire measurement range.This kind of 1D-PC film curvature sensor provides a new idea for curvature sensing and measurement.

Size effect on light propagation modulation near band edges in one-dimensional periodic structures

Periodic photonic structures can provide rich modulation in propagation of light due to well-defined band structures.Especially near band edges,light localization and the effect of near-zero refractive index have attracted wide attention.However,the practically fabricated structures can only have finite size,i.e.,limited numbers of periods,leading to changes of the light propagation modulation compared with infinite structures.Here,we study the size effect on light localization and near-zero refractive-index propagation near band edges in one-dimensional periodic structures.Near edges of the band gap,as the structure's size shrinks,the broadening of the band gap and the weakening of the light localization are discovered.When the size is small,an added layer on the surface will perform large modulation in the group velocity.Near the degenerate point with Dirac-like dispersion,the zero-refractive-index effects like the zero-phase difference and near-unity transmittance retain as the size changes,while absolute group velocity fluctuates when the size shrinks.

Spectroscopy and carrier dynamics of one-dimensional nanostructures

In recent years,one-dimensional(1D)nanomaterials have raised researcher's interest because of their unique structur-al characteristic to generate and confine the optical signal and their promising prospects in photonic applications.In this re-view,we summarized the recent research advances on the spectroscopy and carrier dynamics of 1D nanostructures.First,the condensation and propagation of exciton-polaritons in nanowires(NWs)are introduced.Second,we discussed the properties of 1D photonic crystal(PC)and applications in photonic-plasmonic structures.Third,the observation of topological edge states in 1D topological structures is introduced.Finally,the perspective on the potential opportunities and remaining chal-lenges of 1D nanomaterials is proposed.

Investigation of one-dimensional Si/SiO_2 photonic crystals for thermophotovoltaic filter

The spectral control is widely incorporated with the thermophotovoltaic (TPV) technology to improve the optical-electric conversion efficiency of the whole sys- tem. In order to match with GaSb photovoltaic cell, an 8-layer one-dimensional photonic crystals (PC) filter structure was designed as quarter-wave periodic structure by selecting silicon (Si) and silicon dioxide (SiO2) as candidate materials. The multilayer Si/SiO2 structure was developed for the matching filter to simulta- neously realize the optimal matching with the spectral distribution of the high temperature emitter and the quantum efficiency of GaSb cell. The physical vapor deposition (PVD) method was used to fabricate the optical filter and the normal incidence optical property of the filter was measured within the spectral range from 0.7 to 3.3 μm. These experimental data were used to predict the spectral control performance in a TPV system. Finally, temperature performance experiments were carried out to establish its withstanding performance in high temperature envi- ronment.

Omni-directional mirror for visible light based on one-dimensional photonic crystal

The omni-directional reflection characteristics of one-dimensional photonic crystals composed of Ta2O5/MgF2 multi-quantum well （MQW） are studied using the transfer matrix method. An omnidirectional reflector consisting of three and four Ta2O5/MgF2 MQWs is investigated. Results show that the photonic band gap of the photonic crystal composed of three and four Ta2O5/MgF2 MQWs, which are within the wavelength ranges of 402-712 and 412-1,023 nm, respectively, could cover the entire visible region. The relationship among the width of the band gap, its location, reflectivity rate, and incident angle of the incident light is analyzed. The optimal structural parameters of the MQW of the omni-directional reflector in the visible region are also calculated. The calculations provide a guide for the design of omni- directional reflection devices in the visible region.

Properties of single and multiple defect modes in one-dimensional photonic crystals containing left-handed metamaterials

Wave propagation is studied in structures consisting of alternate left- and right-handed layers. Bragg gap and zero-n gap appear in different frequency regions of the structure. The periodicity of the structure is broken by simply reversing the order of the layers in one half of the structure, resulting in defect modes located inside the zero-n gap and Bragg gap. These modes can be made very narrow by adding more layers in the structure. The defect mode located inside the zero-n gap is sensitive to the symmetry of the structure and insensitive to the angle of incidence of the incoming radiation. Multiple modes are also generated inside the gaps by repeating the structural pattern. Thus, a simple structure can be used for single and multiple modes that are imDortant for different applications.

一维多层介质光子晶体的禁带特征及其在滤波中的应用

利用光学传输矩阵法,研究了一维多层介质光子晶体的禁带特征．分析讨论了介质层排列、折射率及几何厚度等因素对光子晶体禁带的影响,进一步数值计算研究表明四层介质以上的光子晶体会因介质层排列顺序不同而产生不同的光子禁带,利用这一特点设计了一种新型的光子晶体滤波器,并研究了其窄带滤波特性．

Dual-channel tunable near-infrared absorption enhancement with graphene induced by coupled modes of topological interface states

The dual-channel nearly perfect absorption is realized by the coupled modes of topological interface states(TIS) in the near-infrared range. An all-dielectric layered heterostructure composed of photonic crystals(Ph C)/graphene/Ph C/graphene/Ph C on Ga As substrate is proposed to excite the TIS at the interface of adjacent Ph C with opposite topological properties. Based on finite element method(FEM) and transfer matrix method(TMM), the dualchannel absorption can be modulated by the periodic number of middle Ph C, Fermi level of graphene, and angle of incident light(TE and TM polarizations). Especially, by fine-tuning the Fermi level of graphene around 0.4 e V, the absorption of both channels can be switched rapidly and synchronously. This design is hopefully integrated into silicon-based chips to control light.