A novel one-time-programmable memory unit based on Schottky-type p-GaN diode

In this work,a novel one-time-programmable memory unit based on a Schottky-type p-GaN diode is proposed.During the programming process,the junction switches from a high-resistance state to a low-resistance state through Schottky junction breakdown,and the state is permanently preserved.The memory unit features a current ratio of more than 10^(3),a read voltage window of 6 V,a programming time of less than 10^(−4)s,a stability of more than 108 read cycles,and a lifetime of far more than 10 years.Besides,the fabrication of the device is fully compatible with commercial Si-based GaN process platforms,which is of great significance for the realization of low-cost read-only memory in all-GaN integration.

Evaluation of the Effectiveness and Safety of One-Time Endodontics in the Treatment of Chronic Apical Periodontitis with Sinus Tract in Pediatric Deciduous Teeth

Objective:To observe the effectiveness and safety of one-time endodontics in the treatment of chronic apical periodontitis with sinus tract in pediatric deciduous teeth.Methods:109 cases of children with chronic apical periodontitis with sinus tract in the deciduous teeth treated in our hospital from January 2022 to December 2023 were selected and grouped by the randomized numerical table method,with 54 cases in the experimental group and 55 cases in the control group.The experimental group was treated with one-time endodontics and the control group was treated with conventional endodontics.Results:After the treatment,the total effective rate of treatment was higher in the experimental group than in the control group(P<0.05);the incidence of adverse events was lower in the experimental group than in the control group(P<0.05);the satisfaction of the children's family members was higher in the experimental group than in the control group(P<0.05);the pain duration was lower in the experimental group than in the control group(P<0.05).Conclusion:In the experimental group,children with chronic apical periodontitis with sinus tract of the deciduous teeth were given one-time endodontic treatment,and the results of its implementation were relatively good.

Research on Energy Efficiency Characteristics of Mining Shovel Hoisting and Slewing System Driven by Hydraulic-Electric Hybrid System

Mining shovel is a crucial piece of equipment for high-efficiency production in open-pit mining and stands as one of the largest energy consumption sources in mining.However,substantial energy waste occurs during the descent of the hoisting system or the deceleration of the slewing platform.To reduce the energy loss,an innovative hydrau-lic-electric hybrid drive system is proposed,in which a hydraulic pump/motor connected with an accumulator is added to assist the electric motor to drive the hoisting system or slewing platform,recycling kinetic and potential energy.The utilization of the kinetic and potential energy reduces the energy loss and installed power of the min-ing shovel.Meanwhile,the reliability of the mining shovel pure electric drive system also can be increased.In this paper,the hydraulic-electric hybrid driving principle is introduced,a small-scale testbed is set up to verify the feasibil-ity of the system,and a co-simulation model of the proposed system is established to clarify the system operation and energy characteristics.The test and simulation results show that,by adopting the proposed system,compared with the traditional purely electric driving system,the peak power and energy consumption of the hoisting electric motor are reduced by 36.7%and 29.7%,respectively.Similarly,the slewing electric motor experiences a significant decrease in peak power by 86.9%and a reduction in energy consumption by 59.4%.The proposed system expands the application area of the hydraulic electric hybrid drive system and provides a reference for its application in over-sized and super heavy equipment.

One-time fertilization at first flowering improves lint yield and dry matter partitioning in late planted short-season cotton

Cotton producers have substantially reduced their inputs(labor,nutrients,and management)mainly by adopting a shortseason cropping management that is characterized by late sowing,high density,and reduced fertilization with one-time application at the first bloom stage without lint yield reduction.However,it has been hypothesized that one-time fertilization at an earlier growth stage could be a more effective and economic management practice.A two-year field experiment was conducted by applying five fertilizer one-time fertilization at 0(FT1),5(FT2),10(FT3),15(FT4),and 20(FT5)days after the first flower appeared in the field and one three-split fertilizer application taken as the conventional control(FT6),making six treatments altogether.Cotton growth period,biomass accumulation,yield,and its formation were quantified.The results showed that the one-time fertilization did not affect the cotton growth progress as compared to FT6,however,the total crop cycles for FT3–FT5 were 3 days shorter.FT1 produced the highest cotton lint yield(1396 kg ha–1),which was similar to the FT6 but higher than the other treatments,and could be attributed to more bolls per unit area and higher lint percentage.Cotton yield was positively correlated with cotton plant biomass accumulated.FT1 had both the highest average(VT)(193.7 kg ha–1 d–1)and the highest maximum(VM)(220.9 kg ha–1 d–1)rates during the fast biomass accumulation period.These results suggest that one-time fertilizer application at the first flower stage might be an adjustment that is more effective than at first bloom,and allowed for easier decision making for application date due to non counting of plants with flowers is needed.

One-time sintering process to modify xLi2MnO3(1-x)LiMO2 hollow architecture and studying their enhanced electrochemical performances

To solve the critical problems of lithium rich cathode materials, e.g., structure instability and short cycle life, we have successfully prepared a ZrO2-coated and Zr-doping xLi2MnO3·(1–x)LiMO2 hollow architecture via one-time sintering process. The modified structural materials as lithium-ion cathodes present good structural stability and superior cycle performance in LIBs. The discharge capacity of the ZrO2-coated and Zr-doped hollow pristine is 220 mAh g-1 at the 20th cycle at 0.2 C(discharge capacity loss, 2.7%)and 150 m Ah g-1 at the 100 th cycle at 1 C(discharge capacity loss, 17.7%), respectively. However, hollow pristine electrode only delivers 203 m Ah g-1 at the 20 th cycle at 0.2 C and 124 mAh g-1 at the 100 th cycle at 1 C, respectively, and the corresponding to capacity retention is 92.2% and 72.8%, respectively.Diffusion coefficients of modified hollow pristine electrode are much higher than that of hollow pristine electrode after 100 cycles(approach to 1.4 times). In addition, we simulate the adsorption reaction of HF on the surface of ZrO2-coated layer by the first-principles theory. The calculations prove that the adsorption energy of HF on the surface of ZrO2-coated layer is about-1.699 e V, and the ZrO2-coated layer could protect the hollow spherical xLi2MnO3·(1–x)LiMO2 from erosion by HF. Our results would be applicable for systematic amelioration of high-performance lithium rich material for anode with the respect of practical application.

Cryptanalysis of the One-Time Proxy Signature Scheme Used in Mobile Agents

We ayptanalyze Kim et. al's one-time proxy signature scheme used in mobileagents, and then a successful forgery is introduced It is showed that a dishonest customer cansuccessfully forge a valid one-time proxy signature by impersonating the stiver Furthermore, he canrequest the server with responsibility for the forged bidding information.

Effect of Nucleating Agent on the Crystallization of Tailings Glass Ceramics Prepared by One-time Sintering

Glass ceramics was made by the one-time sintering method using the main raw material of iron tailings. On the basis of quaternary system of CaO-MgO-Al2O3-SiO2, using DTA, XRD and SEM, the effects of different nucleating agents and mixing amounts as well as heat treatment on the crystallization of railings glass ceramics were studied. The experimental results show that, nucleating agent and heat treatment are two necessary conditions for one-time sintering preparation of tailings glass ceramics namely, only adding nucleating agent or experiencing heat treatment, the quaternary system can not crystallize. The composite nucleating agent consisting of Cr2O3 and TiO2 can further lead to the crystallization of the CaO-MgO-A1203-SiO2 quaternary system at the lower temperature, with the major phase of diopside. In the range of mass content, 0%-4%, crystal intensity and crystal content grow. But when mass content is more than 4%, the crystal size will become coarser and the crystal distribution will be less regular. Different heat treatment regimes do not change the composition of the crystalline major phase in the glass ceramics crystallization of CaO-MgO-Al2O3-SiO2 system. In the range of 30-60 minutes, with the extension of nucleation and crystallization, crystallization degree enhanced, but if the holding time surpasses 60 minutes, the crystallization is worse.

A One-Time Pad Encryption Scheme Based on Efficient Physical-Layer Secret Key Generation for Intelligent IoT System

The one-time pad(OTP)is an applicationlayer encryption technique to achieve the informationtheoretic security,and the physical-layer secret key generation(SKG)technique is a promising candidate to provide the random keys for OTP.In this paper,we propose a joint SKG and OTP encryption scheme with the aid of a reconfigurable intelligent surface(RIS)to boost secret key rate.To maximize the efficiency of secure communication,we divide the process of secure transmission into two stages:SKG and then encrypted packet transmission.Meanwhile,we design an optimal algorithm for allocating time slots for SKG to maximize SKG efficiency without security risk.Furthermore,we design a key updating protocol based on our SKG scheme for OTP encryption.Simulation results verify that our scheme can generate keys securely and efficiently,and significantly improve the secure communication performance in an intelligent IoT system.

Study of Movement Reliability for Hoisting Jack under a Rocket Launcher Vehicle

The transmission mechanism of a jack is required to support the combat vehicle reliably within a very short time. So reliability research is very important because the mechanism completes motions required under the conditions within limited time. If the transmission mechanism of the jack supports the rocket launcher steadily, it needs to go through several stages as follows ： unlocking, starting, operating, braking, stopping, fixing position and locking. The transmission mechanism of the jack is a complicated and single degree of freedom mechanical system; it can be considered an imaginary mechanical model that has an equivalent moment of inertia and equivalent torque. According to the characteristics of each supporting stages, dynamics equations of the mechanism are established. At the stages of starting and operating, a driving moment and resistance moment are dealt with for a Normal distribution. The design principles for movement reliability of completing action are established and the design principles for time reliability of completing action within a limited time are established. Finally, movement reliability of the transmission mechanism of the jack is 0. 9 852, according to our calculation. Reliability of time to complete action is 0. 9 943.

Water hammer in coarse grained solid liquid flows in hydraulic hoisting for ocean mining

The particles of polymetallic nodules in hydraulic hoisting flows that are used for mining in deep sea are rather coarse, therefore their flow velocity is smaller than that of the surrounding water. The characteristics of solid liquid flows such as their density, concentration, elastic modulus and resistance were discussed. The wave propagation speed and the continuity and momentum equations of water hammer in coarse grained solid liquid flows were theoretically derived, and a water hammer model for such flows was developed.

基于深度学习与机器视觉的起重机吊装安全监测方法

随着我国经济的快速发展,各类大型工程层出不穷,对起重机吊装作业的需求不断增加。然而,吊装作业过程中依然存在众多的安全隐患,极易造成人员伤亡等安全事故。因此,该文提出一种基于深度学习和机器视觉的起重机吊装安全监测方法。将深度学习与机器视觉相结合对监控图像中的被吊物和工人进行识别和定位,同时可自主判断工人是否佩戴安全帽。根据监测模型的识别和定位信息,获得工人与被吊物之间的空间关系,为起重机吊装过程提供安全预警信息。为了提高所提方法的实用性和便携性,开发一个起重机吊装安全智能监测系统,不仅可以实时显示监控图像的识别结果,而且能够输出场景的语义描述、发出安全预警信号。

基于动态贝叶斯网络的装配式建筑吊装施工安全风险分析

针对装配式建筑吊装施工期间风险影响因素多、不确定性高及风险状态随时间动态变化等问题,提出基于动态贝叶斯网络的装配式建筑吊装施工安全风险动态分析方法。首先,根据装配式建筑吊装施工特点和事故致因理论,从“人、物、环、管”4个方面建立风险指标体系。其次,引入时间维度建立动态贝叶斯网络模型,利用模糊理论和专家打分法量化网络节点的概率,并结合Leaky Noisy-or Gate扩展模型修正条件概率。最后,利用动态贝叶斯网络的双向推理功能对装配式建筑吊装施工安全风险进行动态风险分析。由实例分析得到某装配式建筑吊装施工安全风险的时序变化曲线,通过反向推理得到导致吊装事故发生的关键风险因素。研究成果可为分析和有效控制装配式建筑吊装施工安全风险提供新思路。

装配式建筑吊装施工安全关键风险分析的改进DEMATEL方法

为了解决装配式建筑吊装施工安全风险评估体系缺失、演化路径不清的共性问题,提高施工安全科学管理水平,提出了一种基于改进决策试验与实验室评估法(Decision Making Trial and Evaluation Laboratory,DEMATEL)的关键风险识别与演化路径分析方法。基于扎根理论构建装配式建筑吊装施工安全风险评价指标体系,利用基于组合数有序加权算子(Combination Ordered Weighted Averaging,C-OWA)改进直接影响矩阵,建立DEMATEL模型决策矩阵,并通过因果关系图识别关键风险因素,探究关键风险演化路径,以武汉市某工程项目为背景开展实证研究。结果表明:该项目存在X_(1)(工人的专业水平与素质差)、X_(5)(工人的技能培训与安全教育不到位)、X_(15)(人员没有进行定期的安全培训)、X_(18)(现场施工安全管理水平低)、X_(19)(风险意识缺乏)等关键风险因素;在4条基础路径和2条复合路径中,复合路径的权重高于基础路径,随着关键风险之间直接和间接作用的复杂化,发生风险事件的可能性将逐步增加;复合路径除了通过基础路径与关键风险耦合得到以外,还可以通过基础路径的相互作用演化得到。

基于SAPAD-QFD的施工升降机驾驶室设计研究

目的 为提高施工升降机驾驶员工作效率,改善其工作体验,设计出满足驾驶员实际需求的施工升降机驾驶室。方法 以SAPAD理论和QFD理论为理论框架,梳理出用户需求及与其对应的设计特征,并在此基础上开展设计实践。首先,通过观察法和访谈法来获取驾驶员日常行为信息,根据SAPAD理论完成“行为-产品-意义”的映射分析,并借助聚类分析法获取用户需求;其次,利用AHP法对用户需求进行权重分析并计算权重值;最后,根据QFD理论构建施工升降机驾驶室的质量屋,将各项用户需求转化为设计特征,指导设计实践。结果 根据研究结果,提出一种符合驾驶员实际需求的施工升降机驾驶室设计方案。结论 SAPAD理论与QFD理论的综合应用,一方面可以挖掘出用户的核心需求,另一方面增加了设计方案的科学性,在优化施工升降机驾驶室用户体验的同时,也为其他工业产品设计提供了有价值的参考。

基于WSR-IM的装配式预制构件吊装施工安全评价

装配式建筑预制构件吊装施工相较于传统建筑吊装作业的施工安全风险更加具有多样性和复杂性,为准确有效的评估装配式建筑预制构件吊装施工的安全风险状态,识别出关键风险因素,在多因素耦合视角下构建预制构件吊装施工安全事故致因模型。基于施工单位责任视角,首先采用WSR方法论从“物理-事理-人理”三个层面识别并筛选出预制构件吊装施工安全风险影响因素20个,其次利用可以削弱主观因素影响的C-OWA算子构建改进相互作用矩阵进行风险耦合分析,最后用实例验证该方法实用性。结果表明:该项目整体风险等级偏强,项目管理者应该重视预制构件吊装风险的预防和管控,通过采取有效的防御措施,对施工过程中的高权重风险因素进行控制,降低发生重大安全事故的概率。

大跨径刚性悬链桁架桥不带加劲弦顶推施工技术

针对悬链形上加劲连续钢桁梁桥建造,提出不带加劲弦多点同步顶推施工技术,在边跨设置拼装平台,在中跨设置临时墩,分段拼装,顶推钢桁梁,最后吊装合龙加劲弦。在施工中,设置大临结构,以减小钢桁梁的悬臂长度,适应了钢桁梁拼装及顶推装置布置的要求;采用同步控制系统与纠偏装置,解决了多点同步顶推与钢桁梁线性控制的难题;通过有限元仿真分析,验证了顶推过程的可行性;采用落梁法,解决了钢桁主梁合龙及加劲弦合龙的难题。