Residual subsidence time series model in mountain area caused by underground mining based on GNSS online monitoring

The residual subsidence caused by underground mining in mountain area has a long subsidence duration time and great potential harm,which seriously threatens the safety of people's production and life in the mining area.Therefore,it is necessary to use appropriate monitoring methods and mathematical models to effectively monitor and predict the residual subsidence caused by underground mining.Compared with traditional level survey and InSAR(Interferometric Synthetic Aperture Radar)technology,GNSS(Global Navigation Satellite System)online monitoring technology has the advantages of long-term monitoring,high precision and more flexible monitoring methods.The empirical equation method of residual subsidence in mining subsidence is effectively combined with the rock creep equation,which can not only describe the residual subsidence process from the mechanism,but also predict the residual subsidence.Therefore,based on GNSS online monitoring technology,combined with the mining subsidence model of mountain area and adding the correlation coefficient of the compaction degree of caving broken rock and the Kelvin model of rock mechanics,this paper constructs the residual subsidence time series model of arbitrary point on the ground in mountain area.Through the example,the predicted results of the model in the inversion parameter phase and the dynamic prediction phase are compared with the measured data sequence.The results show that the model can carry out effective numerical calculation according to the GNSS monitoring data of any point on the ground,and the model prediction effect is good,which provides a new method for the prediction of residual subsidence in mountain mining.

Comparative analysis of online monitoring methods for transformer insulation performance of 330-750kV substation

The online-monitoring methods for insulation performance of current transformers of 330-750 kV substation are analyzed and compared.The effectiveness and availability of each method are discussed.Main features,advantages and disadvantages of each method and its corresponding standard are also described.

Online Monitoring Volume Deformation of Cement-based Materials in Multiple Environments

Comparing and analyzing some volume deformation measuring means for cement-based materials at home and abroad, a continuous online monitor of cement-based material volume deformation in multiple environments is developed. The device is designed based on the environmental simulation technology, micro-distance measuring technology of laser and eddy current, and transmission agent online monitoring the deformation of multi-group samples. This device can be used widely, such as glass, ceramics, walling material, and so on, with high precision, low testing cost, and intellectualization.

Research on Online Monitoring Methods on SF_(6) Circuit Breakers

To promote the accuracy and application of arcing time measurement for SF_6 circuit breaker in substation,five measurement methods are investigated by two cases experimentally. First,the test results of the five methods for a circuit breaker in different stages of wear and a circuit breaker with a component failure were presented. Then,the time error is analyzed by simulation.Finally,the advantage and disadvantage of these methods are discussed.

Online Monitoring the Products Quality by Measuring Cavity Pressure during Injection Molding

Injection molding is a complicated production technique for the manufacturing of polymer products. During injection molding, it＇s hard to predict molding quality; the injection molding parameters, such as mold temperature, melt temperature, packing pressure and packing time, affect the final properties of product. The cavity pressure is a significant key factor. Residual stress and injection molding weight are significantly affected by the cavity pressure. This study created an approach to predict weight of injection-molded by real-time online cavity pressure monitoring. This study uses a 6-inch with thickness lmm light guide panel and the largest area beneath the pressure curve of time as well as the maximum pressure as its characteristic. The upper and lower limits of the control are set to ＋2 standard deviations, and GUI （Graphical User Interface）-based LabVIEW software is used to perform calculation and analysis of the pressure curve. The results of the experiment show that the online internal cavity pressure monitoring system can effectively monitor the quality of the molded products. In 500 injection molding cycle tests, its error rate was less than 8%, whereas the deviation in mass of the molded products selected through the system＇s filtering process was successfully controlled to be within ±4%.

Online Monitoring of Welding Status Based on a DBN Model During Laser Welding

In this research,an auxiliary illumination visual sensor system,an ultraviolet/visible(UVV)band visual sensor system(with a wavelength less than 780 nm),a spectrometer,and a photodiode are employed to capture insights into the high-power disc laser welding process.The features of the visible optical light signal and the reflected laser light signal are extracted by decomposing the original signal captured by the photodiode via the wavelet packet decomposition(WPD)method.The captured signals of the spectrometer mainly have a wavelength of 400-900 nm,and are divided into 25 sub-bands to extract the spectrum features by statistical methods.The features of the plume and spatters are acquired by images captured by the UVV visual sensor system,and the features of the keyhole are extracted from images captured by the auxiliary illumination visual sensor system.Based on these real-time quantized features of the welding process,a deep belief network(DBN)is established to monitor the welding status.A genetic algorithm is applied to optimize the parameters of the proposed DBN model.The established DBN model shows higher accuracy and robustness in monitoring welding status in comparison with a traditional back-propagation neural network(BPNN)model.The effectiveness and generalization ability of the proposed DBN are validated by three additional experiments with different welding parameters.

Applications of online monitoring technology for tailings dam on digital mine

Considering its structural features, geometric shapes, service mode, environmental media, mechanical behavior, etc, the special nature and complexity of tailings dam were summarized. The technical approach to safety management for tailings dam was proposed, which is the on-line automated monitoring and early warning information. The results show that a strong theoretical basis can be provided for security monitoring and security management of tailings dam. Online automated monitoring system for tailings dam has full implementation of the information. It is applied widely in Lingnan gold mine, Xiadian gold mine and Hedong gold mine in Zhaoyuan, Shandong Province, and achieves good effect.

Design and Develop Online Monitoring and Early-warning System of Crane Structural Stress

This paper proposed an online monitoring and early-warning system of dynamic stress of crane metal structure, and designed this system’s hardware,including sensor unit,data gathering unit,and controlling & processing unit of this sys- tem,and discussed the waterproof protection for resistance strain wafer and scheme of data gathering and transmission of dynamic strain gauge,moreover developed system software of real-time and online monitoring dynamic stress,including data gathering by DLL and data display & processing based on Visual C++.The system applies the dynamic strain gauge to gather the data of the stress,and communicates between PLC control system of crane and upper industrial computer,so that realize the real-time online monitoring and early-warning for crane’s metal structure stress.The test results show this system carry on real time and online monitoring to dynamic stress of loud-bearing metal structure longly and stability,and can give an alarm and overload protection on time.So the system has good practice value.

Establishment of a Quality Assurance System in the Online Monitoring of Electromagnetic Environment of Alternating Current Power Transmission and Transformation Facilities

With the acceleration of urbanization and increase of points in power systems,complaints about power grids have increased.In the actual on-site measurement process,although the actual measurement results can meet the relevant standards,some people are still concerned that the electromagnetic environment may change drastically outside the measurement period,which will have an impact on human health.In this study,the situation of electromagnetic online monitoring systems at home and abroad was introduced firstly,and then some practical requirements for establishing monitoring stations were analyzed.According to existing technologies and related writings,the methods and steps for establishing a quality assurance system were introduced,including the identification of quality assurance system activities and their corresponding structure of quality assurance system documents,the preparation and principles of the documents,and the operation of the quality assurance system.It intends to provide reference for the relevant organizations and personnel conducting electromagnetic environment monitoring when establishing a quality assurance system.Through the establishment of the online monitoring system and the later data publicity,the public have an intuitive understanding of the electromagnetic environment attenuation around power transmission and transformation projects,which can not only make China's electric power industry develop better,but also monitor the unexpected situation in time,maintain public safety and reduce people's fear of electromagnetic radiation in substations.

In-situ analysis of laser-induced breakdown spectra for online monitoring of femtosecond laser machining of sapphire

Laser-induced breakdown spectroscopy(LIBS)is widely used for elemental analysis.However,its application for monitoring and analyzing a laser machining process by examining the changes in spectral information warrants further investigation.In this study,we investigate the effect of laser parameters on the spectra,variations in the time-resolved plasma emission spectra,and the relationship between the morphology of craters and plasma plume evolution during the femtosecond(fs)laser ablation of sapphire.The Boltzmann plot method and Stark’s broadening model are employed to estimate the temporal temperature and electron density of the plasma plume,revealing the process of plasma evolution.This study aims to demonstrate the feasibility of LIBS for online monitoring of laser processing through experimental data and theoretical explanations.

An ultra-thin bolt tension sensor and online monitoring system:For application in hydropower plant unit

The condition of bolted connections significantly affects the structural safety.However,conventional bolt tension sensors fail to provide precise measurements due to their bulky size or inadequate stability.This study employs the piezoresistive effect of crystalline silicon material to fabricate an ultrathin sensor.The sensor exhibits a linear relationship between pressure and voltage,an exceptional stability at varying temperatures,and a superior resistance to corrosion,making it adaptable and user-friendly for applications of high-strength bolt tension monitoring.A monitoring system,incorporating the proposed sensor,has also been developed.This system provides real-time display of bolt tension and enables the assessment of sensor and structural conditions,including bolt loosening or component failure.The efficacy of the proposed sensor and monitoring system was validated through a project carried out at the Xiluodu Hydropower Plant.According to the results,the sensor and online monitoring system effectively gauged and proficiently conveyed and stored bolt tension data.In addition,correlations were created between bolt tensions and essential unit parameters,such as water head,active power,and pressures at vital points,facilitating anomaly detection and early warning.

Non-contact and full-field online monitoring of curing temperature during the in-situ heating process based on deep learning

Online monitoring of the curing temperature field is essential to improving the quality and efficiency of the manufacturing process of composite parts.Traditional embedded sensor-based technologies have difficulty monitoring the full temperature field or have to introduce heterogeneous items that could have an undesired impact on the part.In this paper,a non-contact,full-field monitoring method based on deep learning that predicts the internal temperature field of composite parts in real time using surface temperature measurements of auxiliary materials is proposed.Using the proposed method,an average temperature monitoring accuracy of 97%is achieved in various heating patterns.In addition,this method also demonstrates satisfying feasibility when a stronger thermal barrier covers the part.This method was experimentally validated during the self-resistance electric heating process,in which the monitoring accuracy reached 93.1%.This method can potentially be applied to automated manufacturing and process control in the composites industry.

Online Fault Monitoring of On-Load Tap-Changer Based on Voiceprint Detection

The continuous operation of On-Load Tap-Changers (OLTC) is essential for maintaining stable voltage levels in power transmission and distribution systems. Timely fault detection in OLTC is essential for preventing major failures and ensuring the reliability of the electrical grid. This research paper proposes an innovative approach that combines voiceprint detection using MATLAB analysis for online fault monitoring of OLTC. By leveraging advanced signal processing techniques and machine learning algorithms in MATLAB, the proposed method accurately detects faults in OLTC, providing real-time monitoring and proactive maintenance strategies.

Research on the monitoring system for induced voltage and ground current of 27.5 kV cable sheath in railways

Purpose–The purpose of this study is to address the deficiency in safety monitoring technology for 27.5 kV high-voltage cables within the railway traction power supply by analyzing the grounding methods employed in high-speed railways and developing an effective monitoring solution.Design/methodology/approach–Through establishing a mathematical model of induced potential in the cable sheath and analyzing its influencing factors,the principle of grounding current monitoring is proposed.Furthermore,the accuracy of data collection and alarm function of the monitoring equipment were verified through laboratory simulation experiments.Finally,through practical application in the traction substation of the railway bureau on site,a large amount of data were collected to verify the stability and reliability of the monitoring system in actual environments.Findings–The experimental results show that the designed monitoring system can effectively monitor the grounding current of high-voltage cables and respond promptly to changes in cable insulation status.The system performs excellently in terms of data collection accuracy,real-time performance and reliability of alarm functions.In addition,the on-site trial results further confirm the accuracy and reliability of the monitoring system in practical applications,providing strong technical support for the safe operation of highspeed railway traction power supply systems.Originality/value–This study innovatively develops a 27.5kV high-voltage cable grounding current monitoring system,which provides a new technical means for evaluating the insulation status of cables by accurately measuring the grounding current.The design,experimental verification and application of this system in high-speed railway traction power supply systems have demonstrated significant academic value and practical significance,contributing innovative solutions to the field of railway power supply safety monitoring.

Online Capacitor Voltage Transformer Measurement Error State Evaluation Method Based on In-Phase Relationship and Abnormal Point Detection

The assessment of the measurement error status of online Capacitor Voltage Transformers (CVT) within the power grid is of profound significance to the equitable trade of electric energy and the secure operation of the power grid. This paper advances an online CVT error state evaluation method, anchored in the in-phase relationship and outlier detection. Initially, this method leverages the in-phase relationship to obviate the influence of primary side fluctuations in the grid on assessment accuracy. Subsequently, Principal Component Analysis (PCA) is employed to meticulously disentangle the error change information inherent in the CVT from the measured values and to compute statistics that delineate the error state. Finally, the Local Outlier Factor (LOF) is deployed to discern outliers in the statistics, with thresholds serving to appraise the CVT error state. Experimental results incontrovertibly demonstrate the efficacy of this method, showcasing its prowess in effecting online tracking of CVT error changes and conducting error state assessments. The discernible enhancements in reliability, accuracy, and sensitivity are manifest, with the assessment accuracy reaching an exemplary 0.01%.

Online Monitoring Method Based on Locus-analysis for High-voltage Cable Faults

Online diagnosis methods for high-voltage(HV)cable faults have been extensively studied.Power cable fault monitoring is not accurate,and the degree of data fusion analysis of current methods is insufficient.To address these problems,an online monitoring method based on the locus-analysis for HV cable faults is developed.By simultaneously measuring two circulating currents in a coaxial cable,a two-dimensional locus diagram is drawn.The fault criteria and database are established to detect the fault by analyzing the changes of the locus characteristic parameters.A cross-connected grounding simulation model of a high-voltage cable is developed,and several faults at different locations are simulated.Fault identification is established based on the changes in the long axis,short axis,eccentricity,and tilt angle of the track.The simulation and field experiments show that this method can provide an increased amount of fault-monitoring reference information,which can improve the monitoring accuracy and provide a new approach to cable fault monitoring.

Online Monitoring Method for Insulator Self-explosion Based on Edge Computing and Deep Learning

Aiming at the problems of traditional centralized cloud computing which occupies large computing resources and creates high latency,this paper proposes a fault detection scheme for insulator self-explosion based on edge computing and DL(deep learning).In order to solve the high amount of computation brought by the deep neural network and meet the limited computing resources at the edge,a lightweight SSD(Single Shot MultiBox Detector)target recognition network is designed at the edge,which adopts the MobileNets network to replace VGG16 network in the original model to reduce redundant computing.In the cloud,three detection algorithms(Faster-RCNN,Retinanet,YOLOv3)with obvious differences in detection performance are selected to obtain the coordinates and confidence of the insulator self-explosion area,and then the self-explosion fault detection of the overhead transmission line is realized by a novel multimodel fusion algorithm.The experimental results show that the proposed scheme can effectively reduce the amount of uploaded data,and the average recognition accuracy of the cloud is 95.75%.In addition,it only increases the power consumption of edge devices by about 25.6W/h in their working state.Compared with the existing online monitoring technology of insulator selfexplosion at home and abroad,the proposed scheme has the advantages of low transmission delay,low communication cost and high diagnostic accuracy,which provides a new idea for online monitoring research of power internet of things equipment.

A Monitoring Method for Transmission Tower Foots Displacement Based on Wind-Induced Vibration Response

The displacement of transmission tower feet can seriously affect the safe operation of the tower,and the accuracy of structural health monitoring methods is limited at the present stage.The application of deep learning method provides new ideas for structural health monitoring of towers,but the current amount of tower vibration fault data is restricted to provide adequate training data for Deep Learning(DL).In this paper,we propose a DT-DL based tower foot displacement monitoring method,which firstly simulates the wind-induced vibration response data of the tower under each fault condition by finite element method.Then the vibration signal visualization and Data Transfer(DT)are used to add tower fault data samples to solve the problem of insufficient actual data quantity.Subsequently,the dynamic response test is carried out under different tower fault states,and the tower fault monitoring is carried out by the DL method.Finally,the proposed method is compared with the traditional online monitoring method,and it is found that this method can significantly improve the rate of convergence and recognition accuracy in the recognition process.The results show that the method can effectively identify the tower foot displacement state,which can greatly reduce the accidents that occurred due to the tower foot displacement.

Online Fault Detection Configuration on Equipment Side of a Variable-Air-Volume Air Handling Unit

With the development of the technology of the Internet of Things,more and more operational data can be collected from air conditioning systems.Unfortunately,the most of existing air conditioning controllers mainly provide controlling functions more than storing,processing or computing the measured data.This study develops an online fault detection configuration on the equipment side of air conditioning systems to realize these functions.Modbus communication is served to collect real-time operational data.The calculating programs are embedded to identify whether the measured signals exceed their limits or not,and to detect if sensor reading is frozen and other faults in relation to the operational performance are generated or not.The online fault detection configuration is tested on an actual variable-air-volume(VAV)air handling unit(AHU).The results show that the time ratio of fault detection exceeds 95.00%,which means that the configuration exhibits an acceptable fault detection effect.

An inverse method for online stress monitoring and fatigue life analysis of boiler drums

A method based on solution of the inverse heat conduction problem was presented for online stress monitoring and fatigue life analysis of boiler drums. The mathematical model of the drum temperature distribution is based on the assumptions that the difference of temperature along the longitudinal axis of the boiler drum is negligible with changes only in the radial direction and the circumferential direction, and that the outer surface of drum is thermaUy insulated. Combining this model with the control-volume method provides temperatures at different points on a cross-section of the drum. With the temperature data, the stresses and the life expectancy of the boiler drum are derived according to the ASME code. Applying this method to the cold start-up process of a 300 MW boiler demonstrated the absence of errors caused by the boundary condition assumptions on the inner surface of the drum and testified that the method is an applicable technique for the online stress monitoring and fatigue life analysis of boiler drums.