Open loop control of vortex-induced vibration of a circular cylinder

In this paper both numerical and experimental investigations have been carried out to suppress the vortex-induced vibration （VIV） of a circular cylinder in an electrically low-conducting fluid. The electromagnetic forces （Lorentz forces） in the azimuthal direction were generated through the mounted electrodes and magnets locally on the surface of the cylinder, which have been proved having an accelerating effect to the fluid on the surface of the cylinder. Results of computations are presented for synchronous vibration phenomenon of a cylinder at Re = 200, which are in good agreement with previous computational results. With the Lorentz forces loaded, the VIV of the cylinder has been suppressed successfully. Experimental results have also shown the same tendency and are in reasonable agreement with the numerical results.

Simulation on venting process and valve opening control method for gas trunk pipelines

Determining the venting time of a gas trunk pipeline segment provides an important basis for formulating an emergency plan in the advent of unexpected accidents.As the natural gas venting process corresponds to the transient flow,it is necessary to establish a transient hydraulic-thermal simulation model in order to determine the venting time.In this paper,based on two kinds of venting scenarios in which there is only one venting point in the venting system of a gas trunk pipeline segment—namely,where the venting point is either at one of the two ends or at the junction of two gas trunk pipeline segments—transient hydraulic-thermal simulation models are established.The models consist of gas flow governing equations,the gas state equation,gas physical property equations,initial conditions,and appropriate boundary conditions.The implicit central difference method is used to discretize the gas flow partial differential equations,and the trust-region-dogleg algorithm is used to solve the equations corresponding to each time step,in order to dynamically simulate the whole venting process.The judgment condition for the end of the venting process is that the average pressure of gas trunk pipeline segment is less than 0.11 MPa(actual pressure).Comparing the simulation results of the proposed model with those of the OLGA software and real operational data,we find that the venting time error is less than 10%.On this basis,a venting valve opening control principle is proposed,which prevents the venting noise from exceeded the specified noise value(85 d B)in the venting design of domestic gas pipeline projects.The established calculation model for venting time(dynamic simulation model)for a gas trunk pipeline segment and the proposed opening control principle of venting valve provide reference for the optimal operation of gas pipeline venting systems.

Linux-based Platform for Open Architecture Controller and Its Modular Developing Method

Linux-based Platform for Open Architecture Controller ( POAC ), a new open architecture controller and its modular developing method are discussed. POAC divides the application software of controller into the developing system and the application system. In the developing system, PAOC abstracts a series of function modules with unified data interface and function interface. In the application system, POAC defines the model of the architecture module, realizing the interoperability and interchangeability between the architecture modules. The modular developing method entities the users to make up an application system with some architecture modules, which consist of a set of function modules. The modular developing method decreases the developing time from the standard of controller architecture to the product.

Open Architecture of Single-processor Real-time Robot Control System Based on Windows NT

This paper introduces the architecture and implementation of an industrial robot control system based on Windows NT. This robot control system, which is based on a single-processor structure, can run on general industrial computers. Owing to using Windows NT's real-time extension RTX, the control system can achieve good realtime performance and friendly user interface in one general-purpose operating system. A three layer hierarchical architecture of control software is proposed to make the system more scalable and flexible. Furthermore a communication and configuration system is implemented to enable modules to communicate with each other, which make the control system scalable and flexible.

The Modeling Strategies for Open Software Architecture of Robot Controller

Although the modeling technologies for open robot controllers have been discussed widely, not much literature is devoted to the actual general modeling principles and strategies. The reason is that many researches focus on specific application fields. This paper accommodates for this lacuna and provides some general modeling principles and strategies. At last, the actual new modeling method Hierarchical Object Oriented Petri net (HOONet) which has been proved to be an effective modeling methodology, is used to illustrate the modeling strategies.

Instability of cylinder wake under open-loop active control

Instability of a wake controlled by a streamwise Lorentz force is investigated through a Floquet stability analysis. The streamwise Lorentz force, which is a two-dimensional control input created by an electromagnetic actuator located on the cylinder surface,adjusts the base flow to affect the three-dimensional wake instability and achieve wake stabilization and transition delay. The instability mode at a Reynolds number Re = 300 can be transformed from B to A with N = 1.0, where N is an interaction number representing the strength of the Lorentz force relative to the inertial force in the fluid. The wake flow is Floquet stable when N increases to 1.3. The spanwise perturbation wavelengths are 3.926 D and 0.822 D in the modes A and B, respectively, where D is the cylinder diameter. In addition, the oscillating amplitudes of drag and lift are reduced with the increase in the interaction number. Particle tracing is used to explore the essential physical mechanism for mode transformation. The path lines show that suppression of flow separation hinders the fluid deformation and rotation, leading to the decrease in elliptic and hyperbolic instability regions, which is the material cause of mode transformation.All of the results indicate that wake stabilization and transition delay can be achieved under open-loop active control via the streamwise Lorentz force.

Preparation of Hadamard Gate for Open Quantum Systems by the Lyapunov Control Method

In this paper, the control laws based on the Lyapunov stability theorem are designed for a two-level open quantum system to prepare the Hadamard gate, which is an important basic gate for the quantum computers. First, the density matrix interested in quantum system is transferred to vector formation.Then, in order to obtain a controller with higher accuracy and faster convergence rate, a Lyapunov function based on the matrix logarithm function is designed. After that, a procedure for the controller design is derived based on the Lyapunov stability theorem. Finally, the numerical simulation experiments for an amplitude damping Markovian open quantum system are performed to prepare the desired quantum gate. The simulation results show that the preparation of Hadamard gate based on the proposed control laws can achieve the fidelity up to 0.9985 for the different coupling strengths.

OPTIMIZATION OF CUT-OFF GRADE IN OPEN-PIT BASED ON CONTROL THEORY

ＯＰＴＩＭＩＺＡＴＩＯＮＯＦＣＵＴＯＦＦＧＲＡＤＥＩＮＯＰＥＮＰＩＴＢＡＳＥＤＯＮＣＯＮＴＲＯＬＴＨＥＯＲＹ①ＸｉｅＹｉｎｇｌｉａｎｇＤｅｐａｒｔｍｅｎｔｏｆＭａｎａｇｅｍｅｎｔ，ＳｏｕｔｈＩｎｓｔｉｔｕｔｅｏｆＭｅｔａｌｕｒｇｙ，Ｇａｎｚｈｏｕ...

Open-plus-closed-loop control for chaotic motion of 3D rigid pendulum

An open-plus-closed-loop （OPCL） control problem for the chaotic motion of a 3D rigid pendulum subjected to a constant gravitationM force is studied. The 3D rigid pendulum is assumed to be consist of a rigid body supported by a fixed and frictionless pivot with three rotational degrees. In order to avoid the singular phenomenon of Euler＇s angular velocity equation, the quaternion kinematic equation is used to describe the motion of the 3D rigid pendulum. An OPCL controller for chaotic motion of a 3D rigid pendulum at equilibrium position is designed. This OPCL controller contains two parts： the open-loop part to construct an ideal trajectory and the closed-loop part to stabilize the 3D rigid pendulum. Simulation results show that the controller is effective and efficient.

HiLog:OpenHarmony的高性能日志系统

日志是计算机系统中记录事件状态信息的的重要载体,日志系统负责计算机系统的日志生成、收集和输出.OpenHarmony是新兴的、面向全设备、全场景的开源操作系统.在所述工作之前,包括日志系统在内OpenHarmony有许多关键子系统尚未构建,而OpenHarmony的开源特性使第三方开发者可以为其贡献核心代码.为了解决Open Harmony日志系统缺乏的问题,主要开展如下工作:(1)分析当今主流日志系统的技术架构和优缺点;(2)基于OpenHarmony操作系统的异构设备互联特性设计HiLog日志系统模型规范;(3)设计并实现第1个面向OpenHarmony的日志系统HiLog,并贡献到OpenHarmony主线;(4)对HiLog日志系统的关键指标进行测试和对比试验.实验数据表明,在基础性能方面,HiLog和Log的日志写入阶段吞吐量分别为1500 KB/s和700 KB/s,相比Android日志系统吞吐量提升114%;在日志持久化方面,HiLog可以3.5%的压缩率进行持久化,并且丢包率小于6‰,远低于Log.此外,HiLog还具备数据安全、流量控制等新型实用能力.

THE EFFECTS OF MONOMER STRUCTURE OF CYCLIC KETENE ACETALS ON THE BEHAVIOR OF CONTROLLED RADICAL RING-OPENING POLYMERIZATION

Polymerization of three cyclic ketene acetals: i.e., 5,6-benzo-2-methylene-1,3-dioxepane (BMDO), 2-methylene-4phenyl-1,3-dioxolane (MPDO) and 4,7-dimethyl-2-methylene-1,3-dioxepane (DMMDO) were carried out in the presence of ethyl alpha -bromobutyrate/CuBr/2,2'-bipyridine respectively. The structures of poly(BMDO), poly(MPDO) and poly(DMMDO) were characterized by H-1 and C-13-NMR spectra. The effects of monomer structure on the behavior of atom transfer free radical ring-opening polymerization were investigated and the mechanism of controlled free radical ring-opening polymerization was discussed.

Influence of homodyne-based feedback control on the entropic uncertainty in open quantum system

For an open quantum system containing two qubits under homodyne-based feedback control, we investigate the dynamical behaviors of quantum-memory-assisted entropic uncertainty.Moreover, we analyze the influence of feedback modes and coefficients on the entropic uncertainty.Numerical investigations show that the memory qubit should be placed in a non-dissipative channel if the single dissipative channel condition can be chosen, which helps reduce the entropic uncertainty of the system.For the homodyne feedback control F =λσx(or F =λσy), due to different roles of the entangled qubits A and B, when they are subject to feedback control with different feedback coefficients λ, the exchange of feedback coefficients will cause variations of the entropic uncertainty.When the feedback coefficient corresponding to the memory qubit B is larger(λB >λA), the steady value of the entropic uncertainty will be small, which is conducive to enhancing the robustness of the system.However, for the feedback control F =λσz, the difference between the feedback coefficients has no effect on the steady values of the entropic uncertainty.

基于Open CASCADE的拱桥建模研究

几何引擎是三维BIM建模软件中的核心组件,对软件的性能、准确性、互操作性和用户体验等方面有着重要影响。商业软件的几何引擎虽然经过了多年的发展和优化具有较好的性能和稳定性,但常受限于软件厂商提供的API接口和商业软件所需要的系统环境,无法对底层数据进行访问或修改,灵活性较差,且不具备完全自主商业版权。基于开源几何引擎的应用在很多领域已有相关的研究成果,但在桥梁工程领域较少,基于开源几何引擎Open CASCADE对桥梁工程领域的模型构建技术进行探索,实现自主可控的桥梁工程三维建模平台,以拱桥为研究对象,结合几何引擎的模型构建技术,实现拱桥模型的创建。探索开源几何引擎在桥梁工程领域的建模实现能力,为实现更多桥型的三维建模以及基于模型更进一步的衍生应用积累经验,并为打造自主可控的桥梁工程建模软件提供参考。

基于Motion Control的开放式数控系统的研究

传统数控系统专业性强、可扩展性差和联网通讯能力弱 ,不能适应现代柔性制造和网络化加工的要求。本文采用MotionControl运动控制卡加工业PC机的硬件结构 ,并以COM (componentobjectmodel)技术的模块化编程方法构建了一个开放式的数控系统。最后给出了一个应用实例。

基于OpenFlow的SDN终端接入控制研究

为了解决基于Open Flow的SDN终端安全接入问题,通过对现有SDN中针对终端安全接入解决方案的深入研究,文章提出一种基于Open Flow的SDN终端接入控制系统。该系统将传统终端接入控制技术与基于Open Flow的SDN新型网络相结合,主要实现了SDN环境下的用户身份认证、终端安全状态评估、用户服务授权和Qo S控制等功能,并且对系统的安全性进行了详细分析。文章在Mininet中结合二次开发的RYU控制器进行网络仿真,完成了接入控制功能和通信时延性能的实验。实验结果表明,基于Open Flow的SDN终端接入控制系统具有灵活的接入控制安全策略,能够检测SDN中不安全终端接入带来的威胁,不仅实现了用户的身份认证,而且能够保证接入终端的安全,实现不同安全状态终端的访问授权。性能测试结果表明,基于Open Flow的SDN终端接入控制系统在身份认证时延、平台评估时延和通信时延等方面都能满足实际需要。

基于OpenGL的仿人机器人步行仿真研究

已有的仿真建模中,为了减少复杂性,大多将人足模型简化为点或圆弧,这与实际情况相差较远。在C++Builder 6.0环境下利用"Open GL"图形库建立了3D仿人型机器人双足步行仿真系统,用多关节串联机构模拟足部,实现包括由前脚掌支撑、足部转动的多种步态方式,并分析步行中各种步态间的转换,根据机器人脚跟、脚尖与地面接触状态的变化动态切换不同的步态方式,符合人足步行的实际情况,增强了机器人步行的灵活性与拟人性。该系统的控制部分采用位置反馈与正弦驱动相结合的行走控制方法,通过对人足模型的多关节动力学建模,有效地实现了机器人的稳定步行仿真,并实现了步行过程中的实时步态调整。

A Novel Open-winding Permanent Magnetic Starter-generator

针对永磁电机应用于车载起动／发电系统时存在的电压调节困难、适用转速范围窄、功率因数较低等问题，提出一种新型永磁车载起动／发电系统。通过引入绕组开路型永磁电机，绕组一端接整流桥形成输出直流侧，另一端接逆变桥形成控制端，构成具有宽转速范围和高效率的永磁电机起动／发电系统。分析该系统的起动、发电一体化工作原理，给出了通过逆变侧变换器实现发电机电压、电流控制的方案。仿真和实验结果表明，该新型车载起动／发电系统具有优良的发电调压控制性能，并且适应较宽的转速范围。

基于OpenGL的3ds数据可视化

探讨了基于OpenGL的3ds文件读取、绘制和控制方法,从三维模型在地形中移动的坡度和坡向问题入手,逼真地模拟了3ds文件模型在GRID地形中移动的交互控制过程。开发的三维模拟可视化实验系统,在3ds文件模型和GRID地形的贴合程度方面效果良好。

基于OpenCV的嵌入式智能门禁系统设计

基于智能家居安防系统中安全性的需求,以三星S3C6410嵌入式核心芯片为平台,以Open CV技术为核心,设计实现了具有人脸识别功能的智能安防门禁系统。本智能门禁系统首先将授权人的人脸信息进行灰度化、降维及计算特征值等处理,再进行准备训练,得到授权人的相关信息。然后对摄像头采集到的人脸信息进行处理。将授权人的人脸信息与采集到的人脸信息进行比对,判定门禁系统是否开放。经过测试,该智能门禁系统较好的完成了人脸识别功能,实现了门禁系统的设计要求。本设计已成功应用于智能家居安防系统中。