We report structural and electronic properties of Na_(2)Ni_(3)S_(4),a quasi-two-dimensional compound composed of alternating layers of[Ni_(3)S_(4)]^(2-)and Na^(+).The compound features a remarkable Ni-based kagome lat...We report structural and electronic properties of Na_(2)Ni_(3)S_(4),a quasi-two-dimensional compound composed of alternating layers of[Ni_(3)S_(4)]^(2-)and Na^(+).The compound features a remarkable Ni-based kagome lattice with a square planar configuration of four surrounding S atoms for each Ni atom.Magnetization and electrical measurements reveal a weak paramagnetic insulator with a gap of about 0.5 eV.Our band structure calculation highlights a set of topological flat bands of the kagome lattice derived from the rotated dxz-orbital with C_(3)+T symmetry in the presence of crystal-field splitting.展开更多
We investigated the one-dimensional diamond ladder in the momentum lattice platform. By inducing multiple twoand four-photon Bragg scatterings among specific momentum states, we achieved a flat band system based on th...We investigated the one-dimensional diamond ladder in the momentum lattice platform. By inducing multiple twoand four-photon Bragg scatterings among specific momentum states, we achieved a flat band system based on the diamond model, precisely controlling the coupling strength and phase between individual lattice sites. Utilizing two lattice sites couplings, we generated a compact localized state associated with the flat band, which remained localized throughout the entire time evolution. We successfully realized the continuous shift of flat bands by adjusting the corresponding nearest neighbor hopping strength, enabling us to observe the complete localization process. This opens avenues for further exploration of more complex properties within flat-band systems, including investigating the robustness of flat-band localized states in disordered flat-band systems and exploring many-body localization in interacting flat-band systems.展开更多
This paper presents an investigation of the seismic behavior of reinforced concrete(RC)structures in which shear walls are the main lateral load-resisting elements and the participation of flat slab floor systems is n...This paper presents an investigation of the seismic behavior of reinforced concrete(RC)structures in which shear walls are the main lateral load-resisting elements and the participation of flat slab floor systems is not considered in the seismic design procedure.In this regard,the behavior of six prototype structures(with different heights and plan layouts)is investigated through nonlinear static and time history analyses,implemented in the OpenSees platform.The results of the analyses are presented in terms of the behavior of the slab-column connections and their mode of failure at different loading stages.Moreover,the global response of the buildings is discussed in terms of some parameters,such as lateral overstrength due to the gravity flat slab-column frames.According to the nonlinear static analyses,in structures in which the slab-column connections were designed only for gravity loads,the slab-column connections exhibited a punching mode of failure even in the early stages of loading.However,the punching failure was eliminated in structures in which a minimum transverse reinforcement recommended in ACI 318(2019)was provided in the slabs at joint regions.Furthermore,despite neglecting the contribution of gravity flat slab-column frames in the lateral load resistance of the structures,a relatively significant overstrength was imposed on the structures by the gravity frames.展开更多
According to our hypothesis, at the very beginning of the Big Bang, a hyperenergetic spherical wave was created. We described its characteristics in our previous work, and the present work is based on them. Logically,...According to our hypothesis, at the very beginning of the Big Bang, a hyperenergetic spherical wave was created. We described its characteristics in our previous work, and the present work is based on them. Logically, we saw that in cosmic inflation the frequency of such a wave would decrease sharply. Based on the temperature that prevailed immediately after inflation according to the hot Big Bang model, we determined a measure of the size of the inflation in this model, in accordance with our hypothesis.展开更多
The change processes and trends of shoreline and tidal flat forced by human activities are essential issues for the sustainability of coastal area,which is also of great significance for understanding coastal ecologic...The change processes and trends of shoreline and tidal flat forced by human activities are essential issues for the sustainability of coastal area,which is also of great significance for understanding coastal ecological environment changes and even global changes.Based on field measurements,combined with Linear Regression(LR)model and Inverse Distance Weighing(IDW)method,this paper presents detailed analysis on the change history and trend of the shoreline and tidal flat in Bohai Bay.The shoreline faces a high erosion chance under the action of natural factors,while the tidal flat faces a different erosion and deposition patterns in Bohai Bay due to the impact of human activities.The implication of change rule for ecological protection and recovery is also discussed.Measures should be taken to protect the coastal ecological environment.The models used in this paper show a high correlation coefficient between observed and modeling data,which means that this method can be used to predict the changing trend of shoreline and tidal flat.The research results of present study can provide scientific supports for future coastal protection and management.展开更多
This paper shows how the Flat Space Cosmology model correlates the recom-bination epoch CMB temperature of 3000 K with a cosmological redshift of 1100. This proof is given in support of the recent publication that the...This paper shows how the Flat Space Cosmology model correlates the recom-bination epoch CMB temperature of 3000 K with a cosmological redshift of 1100. This proof is given in support of the recent publication that the Tatum and Seshavatharam Hubble temperature formulae can be derived using the Stephan-Boltzmann dispersion law. Thus, as explained herein, the era of high precision Planck scale quantum cosmology has arrived.展开更多
With the continuous development of mechanical industry,higher requirements are put forward for the comprehensive properties of spring steel.The chemical composition and production process of spring flat steel are desi...With the continuous development of mechanical industry,higher requirements are put forward for the comprehensive properties of spring steel.The chemical composition and production process of spring flat steel are designed to meet the requirements of high strength and high toughness of spring flat steel,through the test,the product surface quality and internal quality all meet the national standards,the performance indicators to meet user requirements.展开更多
This paper proposes a distributed control method based on the differential flatness(DF) property of robot swarms. The swarm DF mapping is established for underactuated differentially flat dynamics, according to the co...This paper proposes a distributed control method based on the differential flatness(DF) property of robot swarms. The swarm DF mapping is established for underactuated differentially flat dynamics, according to the control objective. The DF mapping refers to the fact that the system state and input of each robot can be derived algebraically from the flat outputs of the leaders and the cooperative errors and their finite order derivatives. Based on the proposed swarm DF mapping, a distributed controller is designed. The distributed implementation of swarm DF mapping is achieved through observer design. The effectiveness of the proposed method is validated through a numerical simulation of quadrotor swarm synchronization.展开更多
Spinning has a significant influence on all textile processes. Combinations of all the capital equipment display the process’ critical condition. By transforming unprocessed fibers into carded sliver and yarn, the ca...Spinning has a significant influence on all textile processes. Combinations of all the capital equipment display the process’ critical condition. By transforming unprocessed fibers into carded sliver and yarn, the carding machine serves a critical role in the textile industry. The carding machine’s licker-in and flat speeds are crucial operational factors that have a big influence on the finished goods’ quality. The purpose of this study is to examine the link between licker-in and flat speeds and how they affect the yarn and carded sliver quality. A thorough experimental examination on a carding machine was carried out to accomplish this. The carded sliver and yarn produced after experimenting with different licker-in and flat speed combinations were assessed for important quality factors including evenness, strength, and flaws. To account for changes in material qualities and machine settings, the study also took into consideration the impact of various fiber kinds and processing circumstances. The findings of the investigation showed a direct relationship between the quality of the carded sliver and yarn and the licker-in and flat speeds. Within a limited range, greater licker-in speeds were shown to increase carding efficiency and decrease fiber tangling. On the other hand, extremely high speeds led to more fiber breakage and neps. Higher flat speeds, on the other hand, helped to enhance fiber alignment, which increased the evenness and strength of the carded sliver and yarn. Additionally, it was discovered that the ideal blend of licker-in and flat rates varied based on the fiber type and processing circumstances. When being carded, various fibers displayed distinctive behaviors that necessitated adjusting the operating settings in order to provide the necessary quality results. The study also determined the crucial speed ratios between the licker-in and flat speeds that reduced fiber breakage and increased the caliber of the finished goods. The results of this study offer useful information for textile producers and process engineers to improve the quality of carded sliver and yarn while maximizing the performance of carding machines. Operators may choose machine settings and parameter adjustments wisely by knowing the impacts of licker-in and flat speeds, which will increase textile industry efficiency, productivity, and product quality.展开更多
Flat subduction can significantly influence the distribution of volcanism,stress state,and surface topography of the overriding plate.However,the mechanisms for inducing flat subduction remain controversial.Previous t...Flat subduction can significantly influence the distribution of volcanism,stress state,and surface topography of the overriding plate.However,the mechanisms for inducing flat subduction remain controversial.Previous two-dimensional(2-D)numerical models and laboratory analogue models suggested that a buoyant impactor(aseismic ridge,oceanic plateau,or the like)may induce flat subduction.However,three-dimensional(3-D)systematic studies on the relationship between flat subduction and buoyant blocks are still lacking.Here,we use a 3-D numerical model to investigate the influence of the aseismic ridge,especially its width(which is difficult to consider in 2-D numerical models),on the formation of flat subduction.Our model results suggest that the aseismic ridge needs to be wide and thick enough to induce flat subduction,a condition that is difficult to satisfy on the Earth.We also find that the subduction of an aseismic ridge parallel to the trench or a double aseismic ridge normal to the trench has a similar effect on super-wide aseismic ridge subduction in terms of causing flat subduction,which can explain the flat subduction observed beneath regions such as Chile and Peru.展开更多
Understanding the sensitivity of tidal flats to environmental changes is challenging.Currently,most studies rely on process-based models to systematically explain the morphodynamic evolution of tidal flats.In this stu...Understanding the sensitivity of tidal flats to environmental changes is challenging.Currently,most studies rely on process-based models to systematically explain the morphodynamic evolution of tidal flats.In this study,we proposed an alternative empirical approach to explore tidal flat dynamics using statistical indices based on long-term time series of daily surface elevation development.Surface elevation dynamic(SED)indices focus on the magnitude and period of surface elevation changes,while morphodynamic signature(MDS)indices relate sediment dynamics to environmental drivers.The statistical analyses were applied to an intervention site in the Netherlands to determine the effect of recently constructed groynes on the tidal flat.Using these analyses,we were able to(1)detect a reduction in the daily SED and(2)determine that the changes in the daily SED were predominantly caused by the reduction in wave impact between the groynes rather than the reduction in tidal currents.Overall,the presented results showed that the combination of novel statistical indices provides new insights into the trajectories of tidal flats,ecosystem functioning,and sensitivity to physical drivers(wind and tides).Finally,we suggested how the SED and MDS indices may help to explore the future trajectories and climate resilience of intertidal habitats.展开更多
Mode-locked microcombs with flat spectral profiles provide the high signal-to-noise ratio and are in high demand for wavelength division multiplexing(WDM)-based applications,particularly in future high-capacity commun...Mode-locked microcombs with flat spectral profiles provide the high signal-to-noise ratio and are in high demand for wavelength division multiplexing(WDM)-based applications,particularly in future high-capacity communication and parallel optical computing.Here,we present two solutions to generate local relatively flat spectral profiles.One microcavity with ultra-flat integrated dispersion is pumped to generate one relatively flat single soliton source spanning over 150 nm.Besides,one extraordinary soliton crystal with single vacancy demonstrates the local relatively flat microcomb lines when the inner soliton spacings are slightly irregular.Our work paves a new way for soliton-based applications owing to the relatively flat spectral characteristics.展开更多
To identify the distribution pattern of macrofaunal assemblages of the Dafeng intertidal flats in response to hydrodynamic and sediment dynamic processes in the northern Jiangsu coast,East China,macrofauna sampling an...To identify the distribution pattern of macrofaunal assemblages of the Dafeng intertidal flats in response to hydrodynamic and sediment dynamic processes in the northern Jiangsu coast,East China,macrofauna sampling and hydrodynamic observations were carried out simultaneously across the mud flat,mixed mud-sand flat,and silt-sand flat of the intertidal zone in June 2018.Results show that there was a clear zonal distribution pattern of the macrofaunal communities,as is controlled by local hydrological and sedimentary environments.Principal component analysis(PCA)revealed three types of intertidal area in terms of hydrological and surficial sediment parameters.Similarly,three distinct groups of the macrofaunal communities,i.e.,mud flat,mix mud-sand,and silt-sand groups,were recognized at similarity level of 24%based on the CLUSTER analysis in similarity profile(SIMPROF)test.Correlation analysis upon best variables stepwise search(BVSTEP)indicated the importance of the hydrodynamics(e.g.,water temperature and salinity,tidal duration,flow speed,suspended sediment concentration,and wave height)in the differentiation of macrofaunal communities with different taxonomic classes over the intertidal zone.Therefore,macrofaunal assemblages,similar to hydrology and surficial sediment,have a unique zonation pattern.Small-sized deposit feeders adapt better to low energy environments,thus dominated the upper part of the intertidal flat,whilst the heavy and large-sized filter feeders and deposit feeders were dominant over the middle and lower parts.The hydrodynamic and sediment processes cause biota-niche separation,which affected the biological processes across the intertidal flat.展开更多
In this paper,we study locally strongly convex affine hypersurfaces with the vanishing Weyl curvature tensor and semi-parallel cubic form relative to the Levi-Civita connection of the affine metric.As a main result,we...In this paper,we study locally strongly convex affine hypersurfaces with the vanishing Weyl curvature tensor and semi-parallel cubic form relative to the Levi-Civita connection of the affine metric.As a main result,we classify these hypersurfaces as not being of a flat affine metric.In particular,2 and 3-dimensional locally strongly convex affine hypersurfaces with semi-parallel cubic forms are completely determined.展开更多
The novel electronic properties of bilayer graphene can be fine-tuned via twisting,which may induce flat bands around the Fermi level with nontrivial topology.In general,the band structure of such twisted bilayer grap...The novel electronic properties of bilayer graphene can be fine-tuned via twisting,which may induce flat bands around the Fermi level with nontrivial topology.In general,the band structure of such twisted bilayer graphene(TBG)can be theoretically obtained by using first-principles calculations,tight-binding method,or continuum model,which are either computationally demanding or parameters dependent.In this work,by using the sure independence screening sparsifying operator method,we propose a physically interpretable three-dimensional(3D)descriptor which can be utilized to readily obtain theΓ-point gap of TBG at arbitrary twist angles and different interlayer spacings.The strong predictive power of the descriptor is demonstrated by a high Pearson coefficient of 99%for both the training and testing data.To go further,we adopt the neural network algorithm to accurately probe the flat bands of TBG at various twist angles,which can accelerate the study of strong correlation physics associated with such a fundamental characteristic,especially for those systems with a larger number of atoms in the unit cell.展开更多
Mangrove forest is one of the most important ecological and environmental resources by effectively promoting tidal flat deposition and preventing the coastal region from typhoon.However,there have been mass loss of ma...Mangrove forest is one of the most important ecological and environmental resources by effectively promoting tidal flat deposition and preventing the coastal region from typhoon.However,there have been mass loss of mangrove forests due to anthropogenic activities.It is an urgent need to explore an effective way for mangrove restoration.Here,three rows of bamboo fences with hydro-sedimentary observation set over Aegiceras corniculatum mangrove tidal flat of the Nanliu Delta,the largest delta of Beibu Gulf,China,were conducted to analyze the hydro-sedimentary variations induced by bamboo fences.Results identified that the mean horizontal velocity Um per burst(20 min)decreased by as much as 71%and 40%in comparison with those without bamboo fences in March and November,respectively,when the tidal current entering the bamboo area during flood.The maximum of mean horizontal flow velocity Um-max at bamboo area was 50%–75%of that without bamboo fences during ebb tide.The suspended sediment concentration of bamboo area suggested a maximum reduction of 57%relative to bare flat during flood,and was 80%lower than bare flat at ebb peak.Moreover,the turbulent kinetic dissipationεat flood tide was significantly higher than that at ebb tide,while the bamboo fences greatly increased the turbulent kinetic dissipationεby 2 to 5 times relative to bare flat,resulting in an increase of the bed elevation by inhibiting the sediment incipient motion and intercepting suspended sediment.The siltation rate at the bamboo area was 140%and 29.3%higher than that at the bare flat and the region covered with A.corniculatum,respectively.These results highlight that bamboo fences can effectively attenuate tidal current and thus promote siltation over mangrove flat,which contribute great benefit to mangrove survival.展开更多
Spinning has a significant influence on all textile processes. Combinations of all the capital equipment display the process’ critical condition. By transforming unprocessed fibers into carded sliver and yarn, the ca...Spinning has a significant influence on all textile processes. Combinations of all the capital equipment display the process’ critical condition. By transforming unprocessed fibers into carded sliver and yarn, the carding machine serves a critical role in the textile industry. The carding machine’s licker-in and flat speeds are crucial operational factors that have a big influence on the finished goods’ quality. The purpose of this study is to examine the link between licker-in and flat speeds and how they affect the yarn and carded sliver quality. A thorough experimental examination on a carding machine was carried out to accomplish this. The carded sliver and yarn produced after experimenting with different licker-in and flat speed combinations were assessed for important quality factors including evenness, strength, and flaws. To account for changes in material qualities and machine settings, the study also took into consideration the impact of various fiber kinds and processing circumstances. The findings of the investigation showed a direct relationship between the quality of the carded sliver and yarn and the licker-in and flat speeds. Within a limited range, greater licker-in speeds were shown to increase carding efficiency and decrease fiber tangling. On the other hand, extremely high speeds led to more fiber breakage and neps. Higher flat speeds, on the other hand, helped to enhance fiber alignment, which increased the evenness and strength of the carded sliver and yarn. Additionally, it was discovered that the ideal blend of licker-in and flat rates varied based on the fiber type and processing circumstances. When being carded, various fibers displayed distinctive behaviors that necessitated adjusting the operating settings in order to provide the necessary quality results. The study also determined the crucial speed ratios between the licker-in and flat speeds that reduced fiber breakage and increased the caliber of the finished goods. The results of this study offer useful information for textile producers and process engineers to improve the quality of carded sliver and yarn while maximizing the performance of carding machines. Operators may choose machine settings and parameter adjustments wisely by knowing the impacts of licker-in and flat speeds, which will increase textile industry efficiency, productivity, and product quality.展开更多
Artificial/seminatural environments,such as aquacultural ponds,saltpans,and croplands,have recently been acknowledged as important habitats for coastal waterbirds.Although coastal waterbirds tend to use artificial hab...Artificial/seminatural environments,such as aquacultural ponds,saltpans,and croplands,have recently been acknowledged as important habitats for coastal waterbirds.Although coastal waterbirds tend to use artificial habitats around tidal flats as roosting sites during high-tide,it remains unclear whether the importance of surrounding habitats relative to tidal flats varies among landscape types,seasons,species,or tidal conditions.The Black-faced Spoonbill(Platalea minor)and Eurasian Spoonbill(P.leucorodia)are two closely related sympatric species in East Asia with narrow and wide distribution ranges and habitat requirements,respectively.We therefore expect that both species will use surrounding artificial habitats across seasons at high tides,but Blackfaced Spoonbills will use them less frequently than Eurasian Spoonbills.Here,we address these hypotheses in the Imazu tidal flat and its surrounding environments in southern Japan.We investigated the habitat use and behavioral patterns of both species through route and behavioral surveys during the fall migration and wintering seasons in 2021.We found that both species used surrounding habitats including artificial ones more frequently than the tidal flat regardless of the tidal condition or season,but spoonbills used these habitats more frequently in winter than in autumn.We also found that Eurasian Spoonbills foraged in surrounding artificial habitats more frequently than Black-faced Spoonbills.These results not only demonstrate how coastal waterbirds exploit surrounding habitats relative to tidal flats but also suggest that the importance of surrounding habitats varies among species and seasons.Our study thus emphasizes that valuing and managing surrounding habitats in addition to tidal flats are key to conserving globally declining waterbirds.展开更多
Lying flat(Tang Ping)is a prevalent way of life in contemporary countries throughout the world.It is an avoidance behavior chosen by individuals in response to limited social resources and ongoing harsh social competi...Lying flat(Tang Ping)is a prevalent way of life in contemporary countries throughout the world.It is an avoidance behavior chosen by individuals in response to limited social resources and ongoing harsh social competition.Previous studies have demonstrated that the phenomena of“lying flat”has a major negative effect on student learning.In order to investigate the impact of educational innovation on the phenomenon of“lying flat”,we will observe students’learning behaviors under the traditional education model and innovative teaching methods in our Bali teaching practice to determine the causes of“lying flat”and the means to improve educational innovation.The study found that“lying flat”is caused not just by students’discontent with their level difference,but also by the conflict between external resources and internal pressure.In addition,educational reforms on three levels,including further stratified education,strengthening teacher education and promoting effective communication between students and teachers,and employing online resources to promote students’interest in learning,can ameliorate the phenomenon of pupils“lying flat”.This study contends that educational innovation can have a positive effect on the phenomena of“lying flat”.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.12141002 and 12225401)the National Key Research and Development Program of China(Grant No.2021YFA1401902)+1 种基金the CAS Interdisciplinary Innovation Teamthe Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB28000000)。
文摘We report structural and electronic properties of Na_(2)Ni_(3)S_(4),a quasi-two-dimensional compound composed of alternating layers of[Ni_(3)S_(4)]^(2-)and Na^(+).The compound features a remarkable Ni-based kagome lattice with a square planar configuration of four surrounding S atoms for each Ni atom.Magnetization and electrical measurements reveal a weak paramagnetic insulator with a gap of about 0.5 eV.Our band structure calculation highlights a set of topological flat bands of the kagome lattice derived from the rotated dxz-orbital with C_(3)+T symmetry in the presence of crystal-field splitting.
基金Project supported by the National Natural Science Foundation of China (Grant No.12074367)Anhui Initiative in Quantum Information Technologies,the National Key Research and Development Program of China (Grant No.2020YFA0309804)+3 种基金Shanghai Municipal Science and Technology Major Project (Grant No.2019SHZDZX01)the Strategic Priority Research Program of Chinese Academy of Sciences (Grant No.XDB35020200)Innovation Program for Quantum Science and Technology (Grant No.2021ZD0302002)New Cornerstone Science Foundation。
文摘We investigated the one-dimensional diamond ladder in the momentum lattice platform. By inducing multiple twoand four-photon Bragg scatterings among specific momentum states, we achieved a flat band system based on the diamond model, precisely controlling the coupling strength and phase between individual lattice sites. Utilizing two lattice sites couplings, we generated a compact localized state associated with the flat band, which remained localized throughout the entire time evolution. We successfully realized the continuous shift of flat bands by adjusting the corresponding nearest neighbor hopping strength, enabling us to observe the complete localization process. This opens avenues for further exploration of more complex properties within flat-band systems, including investigating the robustness of flat-band localized states in disordered flat-band systems and exploring many-body localization in interacting flat-band systems.
文摘This paper presents an investigation of the seismic behavior of reinforced concrete(RC)structures in which shear walls are the main lateral load-resisting elements and the participation of flat slab floor systems is not considered in the seismic design procedure.In this regard,the behavior of six prototype structures(with different heights and plan layouts)is investigated through nonlinear static and time history analyses,implemented in the OpenSees platform.The results of the analyses are presented in terms of the behavior of the slab-column connections and their mode of failure at different loading stages.Moreover,the global response of the buildings is discussed in terms of some parameters,such as lateral overstrength due to the gravity flat slab-column frames.According to the nonlinear static analyses,in structures in which the slab-column connections were designed only for gravity loads,the slab-column connections exhibited a punching mode of failure even in the early stages of loading.However,the punching failure was eliminated in structures in which a minimum transverse reinforcement recommended in ACI 318(2019)was provided in the slabs at joint regions.Furthermore,despite neglecting the contribution of gravity flat slab-column frames in the lateral load resistance of the structures,a relatively significant overstrength was imposed on the structures by the gravity frames.
文摘According to our hypothesis, at the very beginning of the Big Bang, a hyperenergetic spherical wave was created. We described its characteristics in our previous work, and the present work is based on them. Logically, we saw that in cosmic inflation the frequency of such a wave would decrease sharply. Based on the temperature that prevailed immediately after inflation according to the hot Big Bang model, we determined a measure of the size of the inflation in this model, in accordance with our hypothesis.
基金supported by the National Natural Science Foundation of China (41602205, 42293261)the China Geological Survey Program (DD20189506, DD20211301)+2 种基金the Special Investigation Project on Science and Technology Basic Resources of the Ministry of Science and Technology (2021FY101003)the Central Guidance for Local Scientific and Technological Development Fund of 2023the Project of Hebei University of Environmental Engineering (GCY202301)
文摘The change processes and trends of shoreline and tidal flat forced by human activities are essential issues for the sustainability of coastal area,which is also of great significance for understanding coastal ecological environment changes and even global changes.Based on field measurements,combined with Linear Regression(LR)model and Inverse Distance Weighing(IDW)method,this paper presents detailed analysis on the change history and trend of the shoreline and tidal flat in Bohai Bay.The shoreline faces a high erosion chance under the action of natural factors,while the tidal flat faces a different erosion and deposition patterns in Bohai Bay due to the impact of human activities.The implication of change rule for ecological protection and recovery is also discussed.Measures should be taken to protect the coastal ecological environment.The models used in this paper show a high correlation coefficient between observed and modeling data,which means that this method can be used to predict the changing trend of shoreline and tidal flat.The research results of present study can provide scientific supports for future coastal protection and management.
文摘This paper shows how the Flat Space Cosmology model correlates the recom-bination epoch CMB temperature of 3000 K with a cosmological redshift of 1100. This proof is given in support of the recent publication that the Tatum and Seshavatharam Hubble temperature formulae can be derived using the Stephan-Boltzmann dispersion law. Thus, as explained herein, the era of high precision Planck scale quantum cosmology has arrived.
文摘With the continuous development of mechanical industry,higher requirements are put forward for the comprehensive properties of spring steel.The chemical composition and production process of spring flat steel are designed to meet the requirements of high strength and high toughness of spring flat steel,through the test,the product surface quality and internal quality all meet the national standards,the performance indicators to meet user requirements.
基金Project supported by the National Natural Science Foundation of China (Nos. 62373025, 12332004,62003013, and 11932003)。
文摘This paper proposes a distributed control method based on the differential flatness(DF) property of robot swarms. The swarm DF mapping is established for underactuated differentially flat dynamics, according to the control objective. The DF mapping refers to the fact that the system state and input of each robot can be derived algebraically from the flat outputs of the leaders and the cooperative errors and their finite order derivatives. Based on the proposed swarm DF mapping, a distributed controller is designed. The distributed implementation of swarm DF mapping is achieved through observer design. The effectiveness of the proposed method is validated through a numerical simulation of quadrotor swarm synchronization.
文摘Spinning has a significant influence on all textile processes. Combinations of all the capital equipment display the process’ critical condition. By transforming unprocessed fibers into carded sliver and yarn, the carding machine serves a critical role in the textile industry. The carding machine’s licker-in and flat speeds are crucial operational factors that have a big influence on the finished goods’ quality. The purpose of this study is to examine the link between licker-in and flat speeds and how they affect the yarn and carded sliver quality. A thorough experimental examination on a carding machine was carried out to accomplish this. The carded sliver and yarn produced after experimenting with different licker-in and flat speed combinations were assessed for important quality factors including evenness, strength, and flaws. To account for changes in material qualities and machine settings, the study also took into consideration the impact of various fiber kinds and processing circumstances. The findings of the investigation showed a direct relationship between the quality of the carded sliver and yarn and the licker-in and flat speeds. Within a limited range, greater licker-in speeds were shown to increase carding efficiency and decrease fiber tangling. On the other hand, extremely high speeds led to more fiber breakage and neps. Higher flat speeds, on the other hand, helped to enhance fiber alignment, which increased the evenness and strength of the carded sliver and yarn. Additionally, it was discovered that the ideal blend of licker-in and flat rates varied based on the fiber type and processing circumstances. When being carded, various fibers displayed distinctive behaviors that necessitated adjusting the operating settings in order to provide the necessary quality results. The study also determined the crucial speed ratios between the licker-in and flat speeds that reduced fiber breakage and increased the caliber of the finished goods. The results of this study offer useful information for textile producers and process engineers to improve the quality of carded sliver and yarn while maximizing the performance of carding machines. Operators may choose machine settings and parameter adjustments wisely by knowing the impacts of licker-in and flat speeds, which will increase textile industry efficiency, productivity, and product quality.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB 41000000)the National Natural Science Foundation of China(Grant No.41820104004)the Fundamental Research Funds for the Central Universities(Grant No.WK2080000144).
文摘Flat subduction can significantly influence the distribution of volcanism,stress state,and surface topography of the overriding plate.However,the mechanisms for inducing flat subduction remain controversial.Previous two-dimensional(2-D)numerical models and laboratory analogue models suggested that a buoyant impactor(aseismic ridge,oceanic plateau,or the like)may induce flat subduction.However,three-dimensional(3-D)systematic studies on the relationship between flat subduction and buoyant blocks are still lacking.Here,we use a 3-D numerical model to investigate the influence of the aseismic ridge,especially its width(which is difficult to consider in 2-D numerical models),on the formation of flat subduction.Our model results suggest that the aseismic ridge needs to be wide and thick enough to induce flat subduction,a condition that is difficult to satisfy on the Earth.We also find that the subduction of an aseismic ridge parallel to the trench or a double aseismic ridge normal to the trench has a similar effect on super-wide aseismic ridge subduction in terms of causing flat subduction,which can explain the flat subduction observed beneath regions such as Chile and Peru.
基金supported by the Royal Netherlands Academy of Arts and Sciences(KNAW)(Grant No.PSA-SA-E-02)the Province of Zeeland,the Netherlands(Grant No.CoE-Buitendijks)。
文摘Understanding the sensitivity of tidal flats to environmental changes is challenging.Currently,most studies rely on process-based models to systematically explain the morphodynamic evolution of tidal flats.In this study,we proposed an alternative empirical approach to explore tidal flat dynamics using statistical indices based on long-term time series of daily surface elevation development.Surface elevation dynamic(SED)indices focus on the magnitude and period of surface elevation changes,while morphodynamic signature(MDS)indices relate sediment dynamics to environmental drivers.The statistical analyses were applied to an intervention site in the Netherlands to determine the effect of recently constructed groynes on the tidal flat.Using these analyses,we were able to(1)detect a reduction in the daily SED and(2)determine that the changes in the daily SED were predominantly caused by the reduction in wave impact between the groynes rather than the reduction in tidal currents.Overall,the presented results showed that the combination of novel statistical indices provides new insights into the trajectories of tidal flats,ecosystem functioning,and sensitivity to physical drivers(wind and tides).Finally,we suggested how the SED and MDS indices may help to explore the future trajectories and climate resilience of intertidal habitats.
基金funding support from Dream X International Innovation Teamthe support from the startup grant from Nanyang Technological University (022527-00001)。
文摘Mode-locked microcombs with flat spectral profiles provide the high signal-to-noise ratio and are in high demand for wavelength division multiplexing(WDM)-based applications,particularly in future high-capacity communication and parallel optical computing.Here,we present two solutions to generate local relatively flat spectral profiles.One microcavity with ultra-flat integrated dispersion is pumped to generate one relatively flat single soliton source spanning over 150 nm.Besides,one extraordinary soliton crystal with single vacancy demonstrates the local relatively flat microcomb lines when the inner soliton spacings are slightly irregular.Our work paves a new way for soliton-based applications owing to the relatively flat spectral characteristics.
基金Supported by the National Natural Science Foundation of China(Nos.41576154,41625021)the National Key Basic Research Program of China(No.2013CB956500)。
文摘To identify the distribution pattern of macrofaunal assemblages of the Dafeng intertidal flats in response to hydrodynamic and sediment dynamic processes in the northern Jiangsu coast,East China,macrofauna sampling and hydrodynamic observations were carried out simultaneously across the mud flat,mixed mud-sand flat,and silt-sand flat of the intertidal zone in June 2018.Results show that there was a clear zonal distribution pattern of the macrofaunal communities,as is controlled by local hydrological and sedimentary environments.Principal component analysis(PCA)revealed three types of intertidal area in terms of hydrological and surficial sediment parameters.Similarly,three distinct groups of the macrofaunal communities,i.e.,mud flat,mix mud-sand,and silt-sand groups,were recognized at similarity level of 24%based on the CLUSTER analysis in similarity profile(SIMPROF)test.Correlation analysis upon best variables stepwise search(BVSTEP)indicated the importance of the hydrodynamics(e.g.,water temperature and salinity,tidal duration,flow speed,suspended sediment concentration,and wave height)in the differentiation of macrofaunal communities with different taxonomic classes over the intertidal zone.Therefore,macrofaunal assemblages,similar to hydrology and surficial sediment,have a unique zonation pattern.Small-sized deposit feeders adapt better to low energy environments,thus dominated the upper part of the intertidal flat,whilst the heavy and large-sized filter feeders and deposit feeders were dominant over the middle and lower parts.The hydrodynamic and sediment processes cause biota-niche separation,which affected the biological processes across the intertidal flat.
基金supported by the NNSF of China (12101194,11401173).
文摘In this paper,we study locally strongly convex affine hypersurfaces with the vanishing Weyl curvature tensor and semi-parallel cubic form relative to the Levi-Civita connection of the affine metric.As a main result,we classify these hypersurfaces as not being of a flat affine metric.In particular,2 and 3-dimensional locally strongly convex affine hypersurfaces with semi-parallel cubic forms are completely determined.
基金the National Natural Science Foundation of China(Grant No.62074114)。
文摘The novel electronic properties of bilayer graphene can be fine-tuned via twisting,which may induce flat bands around the Fermi level with nontrivial topology.In general,the band structure of such twisted bilayer graphene(TBG)can be theoretically obtained by using first-principles calculations,tight-binding method,or continuum model,which are either computationally demanding or parameters dependent.In this work,by using the sure independence screening sparsifying operator method,we propose a physically interpretable three-dimensional(3D)descriptor which can be utilized to readily obtain theΓ-point gap of TBG at arbitrary twist angles and different interlayer spacings.The strong predictive power of the descriptor is demonstrated by a high Pearson coefficient of 99%for both the training and testing data.To go further,we adopt the neural network algorithm to accurately probe the flat bands of TBG at various twist angles,which can accelerate the study of strong correlation physics associated with such a fundamental characteristic,especially for those systems with a larger number of atoms in the unit cell.
基金The National Natural Science Key Foundation of China under contract No.41930537the Key Research and Development Plan of Guangxi under contract No.AB21076016+1 种基金the Marine Science Program for Guangxi First-Class Discipline,Beibu Gulf Universitythe China Postdoctoral Science Foundation under contract No.2022M721150.
文摘Mangrove forest is one of the most important ecological and environmental resources by effectively promoting tidal flat deposition and preventing the coastal region from typhoon.However,there have been mass loss of mangrove forests due to anthropogenic activities.It is an urgent need to explore an effective way for mangrove restoration.Here,three rows of bamboo fences with hydro-sedimentary observation set over Aegiceras corniculatum mangrove tidal flat of the Nanliu Delta,the largest delta of Beibu Gulf,China,were conducted to analyze the hydro-sedimentary variations induced by bamboo fences.Results identified that the mean horizontal velocity Um per burst(20 min)decreased by as much as 71%and 40%in comparison with those without bamboo fences in March and November,respectively,when the tidal current entering the bamboo area during flood.The maximum of mean horizontal flow velocity Um-max at bamboo area was 50%–75%of that without bamboo fences during ebb tide.The suspended sediment concentration of bamboo area suggested a maximum reduction of 57%relative to bare flat during flood,and was 80%lower than bare flat at ebb peak.Moreover,the turbulent kinetic dissipationεat flood tide was significantly higher than that at ebb tide,while the bamboo fences greatly increased the turbulent kinetic dissipationεby 2 to 5 times relative to bare flat,resulting in an increase of the bed elevation by inhibiting the sediment incipient motion and intercepting suspended sediment.The siltation rate at the bamboo area was 140%and 29.3%higher than that at the bare flat and the region covered with A.corniculatum,respectively.These results highlight that bamboo fences can effectively attenuate tidal current and thus promote siltation over mangrove flat,which contribute great benefit to mangrove survival.
文摘Spinning has a significant influence on all textile processes. Combinations of all the capital equipment display the process’ critical condition. By transforming unprocessed fibers into carded sliver and yarn, the carding machine serves a critical role in the textile industry. The carding machine’s licker-in and flat speeds are crucial operational factors that have a big influence on the finished goods’ quality. The purpose of this study is to examine the link between licker-in and flat speeds and how they affect the yarn and carded sliver quality. A thorough experimental examination on a carding machine was carried out to accomplish this. The carded sliver and yarn produced after experimenting with different licker-in and flat speed combinations were assessed for important quality factors including evenness, strength, and flaws. To account for changes in material qualities and machine settings, the study also took into consideration the impact of various fiber kinds and processing circumstances. The findings of the investigation showed a direct relationship between the quality of the carded sliver and yarn and the licker-in and flat speeds. Within a limited range, greater licker-in speeds were shown to increase carding efficiency and decrease fiber tangling. On the other hand, extremely high speeds led to more fiber breakage and neps. Higher flat speeds, on the other hand, helped to enhance fiber alignment, which increased the evenness and strength of the carded sliver and yarn. Additionally, it was discovered that the ideal blend of licker-in and flat rates varied based on the fiber type and processing circumstances. When being carded, various fibers displayed distinctive behaviors that necessitated adjusting the operating settings in order to provide the necessary quality results. The study also determined the crucial speed ratios between the licker-in and flat speeds that reduced fiber breakage and increased the caliber of the finished goods. The results of this study offer useful information for textile producers and process engineers to improve the quality of carded sliver and yarn while maximizing the performance of carding machines. Operators may choose machine settings and parameter adjustments wisely by knowing the impacts of licker-in and flat speeds, which will increase textile industry efficiency, productivity, and product quality.
文摘Artificial/seminatural environments,such as aquacultural ponds,saltpans,and croplands,have recently been acknowledged as important habitats for coastal waterbirds.Although coastal waterbirds tend to use artificial habitats around tidal flats as roosting sites during high-tide,it remains unclear whether the importance of surrounding habitats relative to tidal flats varies among landscape types,seasons,species,or tidal conditions.The Black-faced Spoonbill(Platalea minor)and Eurasian Spoonbill(P.leucorodia)are two closely related sympatric species in East Asia with narrow and wide distribution ranges and habitat requirements,respectively.We therefore expect that both species will use surrounding artificial habitats across seasons at high tides,but Blackfaced Spoonbills will use them less frequently than Eurasian Spoonbills.Here,we address these hypotheses in the Imazu tidal flat and its surrounding environments in southern Japan.We investigated the habitat use and behavioral patterns of both species through route and behavioral surveys during the fall migration and wintering seasons in 2021.We found that both species used surrounding habitats including artificial ones more frequently than the tidal flat regardless of the tidal condition or season,but spoonbills used these habitats more frequently in winter than in autumn.We also found that Eurasian Spoonbills foraged in surrounding artificial habitats more frequently than Black-faced Spoonbills.These results not only demonstrate how coastal waterbirds exploit surrounding habitats relative to tidal flats but also suggest that the importance of surrounding habitats varies among species and seasons.Our study thus emphasizes that valuing and managing surrounding habitats in addition to tidal flats are key to conserving globally declining waterbirds.
文摘Lying flat(Tang Ping)is a prevalent way of life in contemporary countries throughout the world.It is an avoidance behavior chosen by individuals in response to limited social resources and ongoing harsh social competition.Previous studies have demonstrated that the phenomena of“lying flat”has a major negative effect on student learning.In order to investigate the impact of educational innovation on the phenomenon of“lying flat”,we will observe students’learning behaviors under the traditional education model and innovative teaching methods in our Bali teaching practice to determine the causes of“lying flat”and the means to improve educational innovation.The study found that“lying flat”is caused not just by students’discontent with their level difference,but also by the conflict between external resources and internal pressure.In addition,educational reforms on three levels,including further stratified education,strengthening teacher education and promoting effective communication between students and teachers,and employing online resources to promote students’interest in learning,can ameliorate the phenomenon of pupils“lying flat”.This study contends that educational innovation can have a positive effect on the phenomena of“lying flat”.