Equivalent Noise Models in Fiber Optical Communication Systems

An equivalent noise model of optical receiver amplifiers as shown in Fig.1 has been given in many fiber optical communication literatures. It is proved in this paper that this equivalent noise model is neither equivalent to the original one nor measurable. The main reason is that the position of the input impedance in this noise model is not the same with its in the typical noise model,but the same S vn , S in with the typical noise model are used. So the equivalent noise model above is wrong and is not fit to be taken into application.

Toward Low-Cost Flexible Intelligent OAM in Optical Fiber Communication Networks

Low-cost,flexible and intelligent optical performance monitoring and management is a key enabling technology for network quality guarantee,especially in the era of explosive growth of communication capacity and network scale.However,to the best of our knowledge,it is extremely challenging to implement real-time performance monitoring and operations,administration and maintenance(OAM) in a highly complex dynamic network.In this paper,we propose an innovative optical identification(OID) scheme that can realize both performance monitoring and some advanced OAM sub-functions.The basic concepts,applications,challenges and evolution directions of this OID tool are also discussed.

Fiber Grating Ring Laser in All Optical Communication System

Erbium fiber grating ring laser (EFRL) witn an integrated travelling wave and low polarization mode noise is reported. Through modulated experiment of a successful 2.488 Gb/s RZ data, it is shown that the EFRL is a promising alternative to DFB lasers for high-speed transmission applications.

2.5 Gbit/s monolithic ICs for optical fiber transmitter and receiver in 0.35 μm CMOS process

2.5 Gbit/s monolithic integrated circuits （ICs） for optical fiber transmitter and receiver in 0.35 μm CMOS （complementary metal-oxide-semiconductor transistor） process are presented. The transmitter, which includes a 4： 1 multiplexer and a laser diode driver （LDD）, has four 622 Mbit/s random signals as its inputs and gets a 2.5 Gbit/s driving signal as its output; the receiver detects a 2.5 Gbit/s random signal and gets four 622 Mbit/s signals at the output. The main circuits include a trans-impedance amplifier （TIA）, a limiting amplifier, a clock and data recovery （CDR） unit, and a 1： 4 demultiplexer （DEMUX）. Test results prove the logic functions of the transmitter to be right, and the 10% to 90% rise and fall times of transmitter＇s output data eye diagram are 211.1 ps and 200 ps, respectively. The sensitivity of the receiver is measured to be better than 20 mV. The root mean square jitter of the DEMUX＇s output data is 15.6 ps and that of the clock after 1： 4 frequency dividing is 1.9 ps. Two chips are both applicable to 2.5 Gbit/s optical fiber communication systems.

Dispersion Monitoring Techniques in High Bit-rate Optical Communication Systems

For the efficient dynamic dispersion compensation, it is essential to monitor the dispersion accurately. The existing main dispersion monitoring techniques in high bit-rate optical communication systems are presented as well as their operating principles and research progress. The advantages and disadvantages of these methods are analyzed and discussed.

Remote I/O Unit for Optical Fiber Demmunication

Abstract:Based on optical fiber technology, the main electric circuit of the remote I/O unit controller is studied. And the application of the system is illustrated.

STUDY ON MINE FIRE-RESISTANT OPTICAL FIBER CABLE KL5004

This paper introduces a new-developed mine fire-resistant optical fiber cable (OFC)KL5004,its structural characteristics, main feature, the theory about fire resistance and its application in high output and efficiency mine.

Design and Implementation of Optical Fiber Test Equipment

In order to meet the needs of the rapid development of optical fiber communication technology, combined with the thinking of the Internet of Things, a new idea of designing an optical fiber test equipment using Raspberry Pi is proposed. At the same time, the design of a multi-parameter measuring device for optical fiber signals based on Flask was completed.

Recent progress on high-speed optical transmission

The recently reported high spectral efficiency （SE） and high-baud-rate szgnal transmission are all Daseo on digital coherent optical communications and digital signal processing （DSP）. DSP simplifies the re- ception of advanced modulation formats and also enables the major electrical and optical impairments to be processed and compensated in the digital domain, at the transmitter or receiver side. In this paper, we summarize the research progress on high-speed signal generation and detection and also show the progress on DSP for high-speed signal detection. We also report the latest progress on multi-core and multi-mode multiplexing.

Beyond 100 Gb/s Optical OFDM Transmitted in Optical Long-Haul System

100 G Ethernet is considered to become the next generation Ethernet standard for IP networks.Typical 100 Gb/s transmission systems and their performance are presented.Comparision and analysis for 100 Gb/s transmission systems have been discussed.It is demonstrated that optical OFDM can be used in future 100 Gb/s/ch and long-haul system.

A novel 3-stage structure for a low-noise, high-gain and gain-flattened L-band erbium doped fiber amplifier

The configuration of the novel three-stage L-band erbium-doped fiber amplifier with very large and flat gain and very low noise figure presented in this paper uses the forward ASE (amplified spontaneous emission) from the first section of the EDF (erbium-doped fiber) and the backward ASE from the third section of the EDF (both serve as the secondary pump sources of energy) to pump the second EDF. To improve the pump efficiency, the power of the pump is split into two parts (with a ratio of e.g. 2:7). The characteristics of this L-band EDFA are studied on the basis of the Giles Model with ASE.

Flipped-Exponential Nyquist Pulse Technique to Optimize PAPR in Optical Direct-Detection OFDM Systems

In this paper, we describe a novel technique based on the flipped-exponential （FE） Nyquist pulse method for reducing peak-to-average power ratio （PAPR） in an optical direct-detection orthogonal frequency-division multiplexing （DD-QFDM） system, The technique involves proper selection of the FE Nyquist pulses for shaping the different subcarriers of the OFDM. We apply this technique to a DD-OFDM transmission system to significantly reduce PAPR. We also investigate the sensitivity of a received OFDM signal with strong nonlinearity in a standard single-mode fiber （SMF）.

Optical 64QAM-OFDM Transmission Systems with Different Sub-Carriers

In this paper, the transceiver performance of optical 64QAM-OFDM signals with different sub-car- riers is studied. Firstly, we build a 40Gbit/s optical coherent 64QAM-OFDM transmission system. 64QAM-OFDM optical signals with 16, 32, 64, 64, 128, 256 and 512 sub-carriers are transmitted over 100 km single mode fiber (SMF). Then, the optical spectrum diagrams before and after transmission, the bit error rate (BER) and constellation diagrams of received signals were compared. The simulation results show that, with the number of sub-carriers increasing, the value of PAPR will gradually increase and the quality of the received optical signals will deteriorate. Moreover, with the number of sub-carriers increasing, the computational complexity will increase when digital signal processing (DSP) is used. Therefore, we should choose the optimal number of sub-carriers, and the PAPR influence and BER are also considered for achieving effective transmission.

4.096 Tbit/s multidimensional multiplexing signals transmission over 1000 km few mode fiber

We experimentally transmit eight wavelength-division-multiplexing(WDM)channels,16 quadratic-amplitude-modulation(QAM)signals at 32-GBaud,over 1000 km few mode fiber(FMF).In this experiment,we use WDM,mode division multiplexing,and polarization multiplexing for signal transmission.Through the multiple-input-multiple-output(MIMO)equalization algorithms,we achieve the total line transmission rate of 4.096 Tbit/s.The results prove that the bit error rates(BERs)for the16QAM signals after 1000 km FMF transmission are below the soft-decision forward-error-correction(SD-FEC)threshold of2.4×10^(-2),and the net rate reaches 3.413 Tbit/s.Our proposed system provides a reference for the future development of high-capacity communication.

Review of In‑Vehicle Optical Fiber Communication Technology

With the continuous development of automotive intelligent networking and autonomous driving technologies,the number of in-vehicle electronic systems and applications is increasing rapidly.This change increases the amount of data to be transmitted in the vehicle and puts forward further requirements of higher speed and safety for in-vehicle communication.Traditional vehicle bus technologies are no longer sufficient to meet today’s high-speed transmission requirements,in which copper cables are used extensively,resulting in serious electromagnetic interference(EMI).Vehicle optical fiber communication technology,besides greatly improving the data transmission rate,has the advantages of anti-EMI,reducing cable space and vehicle mass.This paper first presents the motivation of applying vehicle optical fiber communication technology and reviews the development history of vehicle optical fiber communication technology.Then,the paper researches the devel-opment trend of automotive electrical and electronic architecture(EEA),from distributed EEA to domain centralized EEA and zone-oriented EEA.Based on the discussion of the development trend of automotive EEA,an EEA based on vehicle optical fiber communication technology is proposed.Finally,the key points and future directions of vehicle optical fiber communication technology research are highlighted,including vehicle multi-mode optical fiber technology,vehicle optical fiber network protocol,and topology.

A flexible receiver with fiber optical parametric amplifier in OCDMA-FSO communication system

A new receiver is proposed, which uses the fiber optical parametric amplifier(FOPA) in optical code division multiple access(OCDMA) over free space optic(FSO) communication system. The noise tolerance as the performance index in this receiver is derived. The receiver can not only improve the noise tolerance but also change the pump data conveniently for adapting to the length variation of the coding sequence under a complex and fast-changing weather condition. The influence of different factors on the noise tolerance is analyzed, and a significant improvement of about 18.77 d B for the noise tolerance can be achieved when the pump power and the length of coding sequence are 5 W and 256, respectively.

Design of A CWDM OADM for Fiber Optical Communication Network

A CWDM is proposed for fiber optic communication networks. The OADM is designed based on SOI structure. The scheme for CWDM optical signal protection is presented.

Digital twin modeling and controlling of optical power evolution enabling autonomous-driving optical networks:a Bayesian approach

Optical networks are evolving toward ultrawide bandwidth and autonomous operation.In this scenario,it is crucial to accurately model and control optical power evolutions(OPEs)through optical amplifiers(OAs),as they directly affect the signal-to-noise ratio and fiber nonlinearities.However,a fundamental contradiction arises between the complex physical phenomena in optical transmission and the required precision in network control.Traditional theoretical methods underperform due to ideal assumptions,while data-driven approaches entail exorbitant costs associated with acquiring massive amounts of data to achieve the desired level of accuracy.In this work,we propose a Bayesian inference framework(BIF)to construct the digital twin of OAs and control OPE in a data-efficient manner.Only the informative data are collected to balance the exploration and exploitation of the data space,thus enabling efficient autonomous-driving optical networks(ADONs).Simulations and experiments demonstrate that the BIF can reduce the data size for modeling erbium-doped fiber amplifiers by 80%and Raman amplifiers by 60%.Within 30 iterations,the optimal controlling performance can be achieved to realize target signal/gain profiles in links with different types of OAs.The results show that the BIF paves the way to accurately model and control OPE for future ADONs.

The Study on Heterodyne and Phase Diversity Coherent Optical Fiber Communication Systems and Their Components

The research in Coherent Optical Fiber Communication Systems (COFCS) using long waveband semiconductor laser diodes as transmitter and local oscillator has evolved gradually from an esteric subject studied in just a few communication laboratories around the world to the field demonstration stage. This is mainly because of the possibility of receiver sensitivity improvement reaching 10～20 dB, that of frequency division multiplexing (FDM) with very fine frequency separation and the possibility of using electronic equalization network to compensate for the effect of optical pulse dispersion in the Single Mode Fiber (SMF). The author of the dissertation has engaged in the study on COFCSs since 1987. Undergoing 3 years of hard work, the finished research work includes two parts: Part I is the study on heterodyne COFCSs and their key components; Part II is the study on two branch phase diversity COFCS and its components. In the first part, using the Lamb′s semi classical theory and the model of vector field, the effects of various kinds of parameters, such as cavity detuning, cavity′s Q factor and the transverse magnetic field strength, on the intramode beat frequency tuning characteristics are analyzed. On the basis of the theoretical analysis, the equipment of 1 523 nm He Ne Stabilized Transverse Zeeman Lasee (STZL) with high frequency stability and certain continuous single frequency tuning range, has been established domestically for the first time. With the development of long waveband semi conductor laser diodes fabricated domestically, the author mainly deals with the long waveband COFCSs using semiconductor laser diodes as transmitter and local oscillator. To counter the poor spectrum characteristics of the conventional double heterojunction semi conductor laser diodes, the characteristics of 1.5 um InGaAsP GRINROD External Cavity Semi conductor Lasers (ECSL) in the case of strong and weak feedback conditions, is experimentally studied. Then the GRINROD Dissertation completed Apr.1991ECSLs with complete closed and compact structure are developed. Using this kind of lasers and other components made domestically, the long waveband large deviation FSK heterodyne single filter/ envelope detection systems and small deviation FSK heterodyne single filter/delay line frequency discriminator detection system are achieved for the first time. In those experiments, the frequency modulation characteristics, line width, single frequency continuous tuning range and frequency stability of the GRINROD ECSL are measured by means of IF spectrum. Meanwhile, the IF receiving circuits are optimized for obtaining stable transmission properties. The main research achievements in part II are the theoretical analysis of the diversity COFCSs. Firstly, the Bit Error Rate (BER) performance of two branch homodyne phase diversity ASK, DPSK and two branch homodyne phase polarization DPSK receivers are analyzed by means of characteristic function model. In the analysis, the effects of pre and post detection filters on the system performance are especially studied. Secondly, the impacts of the phase noise, shot noise, polarization mismatch and imbalance of branch circuits on the two branch homodyne phase diversity ASK receiver, and that of modulation frequency deviation on FSK receiver are analyzed in terms of Gaussian approximation. Lastly, an improved all fiber 90 degree optical hybrid is fabricated. Utilizing the hybrid and 1.5 um InGaAsP GRINROD and grating ECSLs, a low IF, two branch phase diversity FSK coherent optical fiber transmission system is experimented for the first time in China. Guan Kejian Born in Jan. 1963. He received his Ph. D degree in Apr. 1991, in Radio Engineering, Beijing Uni versity of Posts and Telecommunications.