We show that a metasurface composed of a subwavelength metallic slit array embedded in an asymmetric dielectric environment can exhibit either diffraction (EOD). The cascaded refractive extraordinary optical transmi...We show that a metasurface composed of a subwavelength metallic slit array embedded in an asymmetric dielectric environment can exhibit either diffraction (EOD). The cascaded refractive extraordinary optical transmission (EOT) or extraordinary optical indices of the dielectrics can leverage multiple decaying passages into variant subsections with different diffraction order combinations according to the diffraction order chart in the k-vector space, providing a flexible by changing the wavevector of the efficiencies can be enhanced to near or EOD in a single tional metasurface onstrated. Our findings incident light. As a result, either the unity by the excitation of the localized provide a convenient way components on a single planar device.展开更多
In this paper,a novel method is proposed and employed to design a single diffractive optical element(DOE) for implementing spectrum-splitting and beam-concentration(SSBC) functions simultaneously.We develop an opt...In this paper,a novel method is proposed and employed to design a single diffractive optical element(DOE) for implementing spectrum-splitting and beam-concentration(SSBC) functions simultaneously.We develop an optimization algorithm,through which the SSBC DOE can be optimized within an arbitrary thickness range according to the limitations of modern photolithography technology.Theoretical simulation results reveal that the designed SSBC DOE has a high optical focusing efficiency.It is expected that the designed SSBC DOE should have practical applications in high-efficiency solar cell systems.展开更多
A new distribution scheme of decryption keys used in optical verification systems is proposed. The encryption procedure is digitally implemented with the use of an iteration algorithm in computer. Three target images ...A new distribution scheme of decryption keys used in optical verification systems is proposed. The encryption procedure is digitally implemented with the use of an iteration algorithm in computer. Three target images corresponding to three wavelengths are encoded into three sets of phase-only masks (POMs) by a special distributing method. These three sets of POMs are assigned to three authorized users as the personal identification. A lensless optical system is used as the verification system. In the verification procedure, every two of the three authorized users can pass the verification procedure cooperatively, but only one user cannot do. Numerical simulation shows that the proposed distribution scheme of decryption keys not only can improve the security level of verification system, but also can bring convenience and flexibility for authorized users.展开更多
Diffractive optical elements(DOEs) with spectrum separation and beam concentration(SSBC) functions have important applications in solar cell systems. With the SSBC DOEs, the sunlight radiation is divided into seve...Diffractive optical elements(DOEs) with spectrum separation and beam concentration(SSBC) functions have important applications in solar cell systems. With the SSBC DOEs, the sunlight radiation is divided into several wave bands so as to be effectively absorbed by photovoltaic materials with different band gaps. A new method is proposed for designing high-efficiency SSBC DOEs, which is physically simple, numerically fast, and universally applicable. The SSBC DOEs are designed by the new design method, and their performances are analyzed by the Fresnel diffraction integral method.The new design method takes two advantages over the previous design method. Firstly, the optical focusing efficiency is heightened by up to 10%. Secondly, focal positions of all the designed wavelengths can be designated arbitrarily and independently. It is believed that the designed SSBC DOEs should have practical applications to solar cell systems.展开更多
Based on the facts that multijunction solar cells can increase the efficiency and concentration can reduce the cost dramatically, a special design of parallel multijunction solar cells was presented. The design employ...Based on the facts that multijunction solar cells can increase the efficiency and concentration can reduce the cost dramatically, a special design of parallel multijunction solar cells was presented. The design employed a diffractive optical element (DOE) to split and concentrate the sunlight. A rainbow region and a zero-order diffraction region were generated on the output plane where solar cells with corresponding band gaps were placed. An analytical expression of the light intensity distribution on the output plane of the special DOE was deduced, and the limiting photovoltaic efficiency of such parallel multijunction solar ceils was obtained based on Shockley-Queisser's theory. An efficiency exceeding the Shockley--Queisser limit (33%) can be expected using multijunction solar cells consisting of separately fabricated subcells. The results provide an important alternative approach to realize high photovoltaic efficiency without the need for expensive epitaxial technology widely used in tandem solar cells, thus stimulating the research and application of high efficiency and low cost solar cells.展开更多
Two improved algorithms are proposed to extend a diffractive optical element (DOE) to work under the broad spec- trum of sunlight. An optimum design has been found for the DOE, with a weighted average optical effici...Two improved algorithms are proposed to extend a diffractive optical element (DOE) to work under the broad spec- trum of sunlight. An optimum design has been found for the DOE, with a weighted average optical efficiency of about 6.8% better than that of the previous design. The optimization of designing high optical efficiency DOEs will pave the way for future designs of high-efficiency, low-cost lateral multijunction solar cells based on such a DOE.展开更多
A spectrum-splitting and beam-concentrating (SSBC) diffractive optical element (DOE) for three-junction pho- tovoltaics (PV) system is designed and fabricated by five-circ/e micro-fabrication. The incident solar...A spectrum-splitting and beam-concentrating (SSBC) diffractive optical element (DOE) for three-junction pho- tovoltaics (PV) system is designed and fabricated by five-circ/e micro-fabrication. The incident solar light is efficiently split into three sub-spectrum ranges and strongly concentrated on the focal plane, which can be di- rectly utilized by suitable spectrum-matching solar cells. The system concentration factor reaches 12x. Moreover, the designed wavelengths (450nm, 550nm and 65Onto) are spatially distributed on the focal plane, in good agree- ment with the theoretical results. The average optical effic/ency of all the cells over the three designed wavelengths is 60.07%. The SSBC DOE with a high concentration factor and a high optical efficiency provides a cost-effective approach to achieve higher PV conversion efficieneies.展开更多
Based on a modified coupled wave theory of Kogelnik, we have studied the diffraction of an ultrashort pulsed beam with an arbitrary polarization state from a volume holographic grating in photorefractive LiNbO3 crysta...Based on a modified coupled wave theory of Kogelnik, we have studied the diffraction of an ultrashort pulsed beam with an arbitrary polarization state from a volume holographic grating in photorefractive LiNbO3 crystals. The results indicate that the diffracted intensity distributions in the spectral and temporal domains and the diffraction efficiency of the grating are both changed by the polarization state and spectral bandwidth of the input pulsed beam. A method is given of choosing the grating parameters and input conditions to obtain a large variation range of the spectral bandwidth of the diffracted pulsed beam with an appropriate diffraction efficiency. Our study presents a possibility of using a volume holographic grating recorded in anisotropic materials to shape a broadband ultrashort pulsed beam by modulating its polarization state.展开更多
The oxidation of aluminium was studied using optical emission spectroscopy (OES) during the evaporation of aluminium in traces of oxygen in a thermal plasma reactor. The ratio of the measured line intensities of Al-...The oxidation of aluminium was studied using optical emission spectroscopy (OES) during the evaporation of aluminium in traces of oxygen in a thermal plasma reactor. The ratio of the measured line intensities of Al-O with that of Al follows the exact trend as of that obtained from the corresponding line intensities in X-ray diffraction spectra of the synthesized samples. In this paper the inherent capacity of emission spectroscopy in evaluating the growth processes under plasma induced reactions is presented.展开更多
In the Fresnel transform domain, an effective improvement to the conventional iterative algorithm for designing the diffractive optical elements (DOEs) used for spatial beam shaping has been proposed. The algorithm ca...In the Fresnel transform domain, an effective improvement to the conventional iterative algorithm for designing the diffractive optical elements (DOEs) used for spatial beam shaping has been proposed. The algorithm can successfully achieve to design DOEs for beam shaping. Compared with conventional algorithm, this algorithm can provide faster convergence, more powerful ability to overcome local minimum problem and better shaping quality. By computer simulation, the result has shown that the DOEs designed by this algorithm has snch advantages as high uniformity at the main lobe, low profile error and steep edge.展开更多
1 Introduction 1.1 Advantages of DOE 1)High diffraction efficiency; 2)Dispersive; 3)More selectivity of designing parameters; 4)More selectivity of primary materials; 5)Can make components miniature,forming array and ...1 Introduction 1.1 Advantages of DOE 1)High diffraction efficiency; 2)Dispersive; 3)More selectivity of designing parameters; 4)More selectivity of primary materials; 5)Can make components miniature,forming array and integration. 1.2 1.3 megapixel triplet plastic mobile展开更多
Diffractive optics is an important technique for beam shaping with high light efficiency and strong diffraction pattern flexibility. Since the diffraction angle is limited by the unit size of the diffractive optical e...Diffractive optics is an important technique for beam shaping with high light efficiency and strong diffraction pattern flexibility. Since the diffraction angle is limited by the unit size of the diffractive optical element (DOE), the size of the required diffraction pattern is always rather small. In this Letter, refractive/diffractive hybrid optical elements (RDHOEs) consisting of a DOE and a lens are used to realize beam shaping for a large diffraction pattern. The lens, as the component of the RDHOEs, can not only be concave but also convex, and the double sampling Fresnel diffraction algorithm is developed for the design of these two types of RDHOEs. The simulation and experimental results provide solid evidence to demonstrate the proposed method with the pure phase spatial light modulator.展开更多
A novel diffractive optical element, named phase zone photon sieve (PZPS), is presented. There are three kinds of phase plates in PZPSs: PZPS1, PZPS2, and PZPS3. Each of the PZPSs has its own structure and is made ...A novel diffractive optical element, named phase zone photon sieve (PZPS), is presented. There are three kinds of phase plates in PZPSs: PZPS1, PZPS2, and PZPS3. Each of the PZPSs has its own structure and is made on quartz substrate by etching. The three PZPSs have stronger diffraction peak intensity than a photon sieve (PS) when the margin pinhole and zone line width are kept the same. The PZPS3 can produce a smaller central diffractive spot than the ordinary PS with the same number of zones on the Fresnel zone plate. We have given the design method for and the simulation of PZPS and PS. PZPS has potential applications in optical maskless lithography.展开更多
The matrix eigenvalue method is used to analyze a laser resonator composed of diffraction optical elements. The results show that this type of resonator can separate fundamental mode and high order modes effectively. ...The matrix eigenvalue method is used to analyze a laser resonator composed of diffraction optical elements. The results show that this type of resonator can separate fundamental mode and high order modes effectively. The output beams can be designed for different requests.展开更多
Fresnel incoherent correlation holography(FINCH)is a self-interference based super-resolution three-dimensional imaging technique.FINCH in inline configuration requires an active phase modulator to record at least thr...Fresnel incoherent correlation holography(FINCH)is a self-interference based super-resolution three-dimensional imaging technique.FINCH in inline configuration requires an active phase modulator to record at least three phase-shifted camera shots to reconstruct objects without twin image and bias terms.In this study,FINCH is realized using a randomly multiplexed bifocal binary diffractive Fresnel zone lenses fabricated using electron beam lithography.The object space is calibrated by axially scanning a point object along the optical axis and recording the corresponding point spread holograms(PSHs).An object is mounted within the calibrated object space,and the object hologram was recorded under identical experimental conditions used for recording the PSHs.The image of the object at different depths was reconstructed by a cross-correlation between the object hologram and the PSHs.Application potential including bio-medical optics is discussed.展开更多
Annular-focused beams have attracted attention because of their novel properties and applications in optical trapping, high resolution microscopy, and laser-induced periodic surface structuring. Generation of this bea...Annular-focused beams have attracted attention because of their novel properties and applications in optical trapping, high resolution microscopy, and laser-induced periodic surface structuring. Generation of this beam is very important and necessary. In this article, a novel design of zone plate for forming the annular-focused beams is proposed. The design principle is introduced, and the characteristics of zone plate are analyzed by numerical simulation. The result shows that the zone plate can form a monochromatic ring-shaped intensity distribution in the focal plane. And the design method is also generally suitable for designing the other optical elements to generate the annular-focused beams.展开更多
Multifocal multiphoton microscopy(MMM)has recently become an important tool in biomedicine for performing three-dimensional fastfluorescence imaging.Using various beamsplitting techniques,MMM splits the near-infrared ...Multifocal multiphoton microscopy(MMM)has recently become an important tool in biomedicine for performing three-dimensional fastfluorescence imaging.Using various beamsplitting techniques,MMM splits the near-infrared laser beam into multiple beamlets and produces a multifocal array on the sample for parallel multiphoton excitation and then recordsfluorescence signal from all foci simultaneously with an area array detector,which significantly improves the imaging speed of multiphoton microscopy and allows for high efficiency in use of the excitation light.In this paper,we discuss the features of several MMM setups using different beamsplitting devices,including a Nipkow spinning disk,a microlens array,a set of beamsplitting mirrors,or a diffractive optical element(DOE).In particular,we present our recent work on the development of an MMM using a spatial light modulator(SLM).展开更多
This review focuses on recent developments in additive manufacturing(AM)of precision optical devices,particularly devices consisting of components with critical features at the micro-and nanoscale.These include,but ar...This review focuses on recent developments in additive manufacturing(AM)of precision optical devices,particularly devices consisting of components with critical features at the micro-and nanoscale.These include,but are not limited to,microlenses,diffractive optical elements,and photonic devices.However,optical devices with large-size lenses and mirrors are not specifically included as this technology has not demonstrated feasibilities in that category.The review is roughly divided into two slightly separated topics,the first on meso-and microoptics and the second on optics with nanoscale features.Although AM of precision optics is still in its infancy with many unanswered questions,the references cited on this exciting topic demonstrate an enabling technology with almost unlimited possibilities.There are many high quality reviews of AM processes of non-optical components,hence they are not the focus of this review.The main purpose of this review is to start a conversion on optical fabrication based on information about 3D AM methods that has been made available to date,with an ultimate long-term goal of establishing new optical manufacturing methods that are low cost and highly precise with extreme flexibility.展开更多
Large-scale linear operations are the cornerstone for performing complex computational tasks.Using optical computing to perform linear transformations offers potential advantages in terms of speed,parallelism,and scal...Large-scale linear operations are the cornerstone for performing complex computational tasks.Using optical computing to perform linear transformations offers potential advantages in terms of speed,parallelism,and scalability.Previously,the design of successive spatially engineered diffractive surfaces forming an optical network was demonstrated to perform statistical inference and compute an arbitrary complex-valued linear transformation using narrowband illumination.We report deep-learning-based design of a massively parallel broadband diffractive neural network for all-optically performing a large group of arbitrarily selected,complex-valued linear transformations between an input and output field of view,each with Ni and No pixels,respectively.This broadband diffractive processor is composed of Nw wavelength channels,each of which is uniquely assigned to a distinct target transformation;a large set of arbitrarily selected linear transformations can be individually performed through the same diffractive network at different illumination wavelengths,either simultaneously or sequentially(wavelength scanning).We demonstrate that such a broadband diffractive network,regardless of its material dispersion,can successfully approximate Nw unique complex-valued linear transforms with a negligible error when the number of diffractive neurons(N)in its design is≥2NwNiNo.We further report that the spectral multiplexing capability can be increased by increasing N;our numerical analyses confirm these conclusions for Nw>180 and indicate that it can further increase to Nw∼2000,depending on the upper bound of the approximation error.Massively parallel,wavelength-multiplexed diffractive networks will be useful for designing highthroughput intelligent machine-vision systems and hyperspectral processors that can perform statistical inference and analyze objects/scenes with unique spectral properties.展开更多
Optical surface scattering analyses based on diffractive optics (DO) are typically applied to one surface;however, there is a need for simulating surface scattering losses for devices having many surface interactions ...Optical surface scattering analyses based on diffractive optics (DO) are typically applied to one surface;however, there is a need for simulating surface scattering losses for devices having many surface interactions such as light pipes. Light pipes are often simulated with geometric optics (GO) using ray tracing, where surface scattering is driven by the surface slope distribution. In the DO case, surface scattering analyses depend on the spatial frequency distribution and amplitude as well as wavelength, with the sinusoidal grating as a fundamental basis. A better understanding of the link, or transition, between DO and GO scattering domains would be helpful for efficiently incorporating scattering loss analyses into ray trace simulations. A formula for the root-mean-square (rms) scattered angle width of a sinusoidal reflection grating that depends only on the surface rms slope is derived from the nonparaxial scalar diffraction theory, thereby linking it to GO. The scatter angle’s mean and rms width are evaluated over a range of grating amplitudes and periods using scalar theory and full vector simulations from the COMSOL® wave optic module for a sinusoidal reflection grating. The conditions under which the diffraction-based solution closely approximates the GO solution, as predicted by the rms slope, are identified. Close agreement is shown between the DO and GO solutions for the same surface rms slope scattering loss due to angular filtering near the critical angle of a total internal reflection (TIR) glass-to-air interface.展开更多
基金National Natural Science Foundation of China(NSFC)(11604217,11574218,11734012,61420106014,61522504)Fundamental Research Funds for the Central Universities(21617410)Guangdong Provincial Innovation and Entrepreneurship Project(2016ZT06D081)
文摘We show that a metasurface composed of a subwavelength metallic slit array embedded in an asymmetric dielectric environment can exhibit either diffraction (EOD). The cascaded refractive extraordinary optical transmission (EOT) or extraordinary optical indices of the dielectrics can leverage multiple decaying passages into variant subsections with different diffraction order combinations according to the diffraction order chart in the k-vector space, providing a flexible by changing the wavevector of the efficiencies can be enhanced to near or EOD in a single tional metasurface onstrated. Our findings incident light. As a result, either the unity by the excitation of the localized provide a convenient way components on a single planar device.
基金Project supported by the National Basic Research Program of China (Grant No. 2011CB301801)the National Natural Science Foundation of China (GrantNos. 91233202,10904099,11204188,61205097,and 11174211)
文摘In this paper,a novel method is proposed and employed to design a single diffractive optical element(DOE) for implementing spectrum-splitting and beam-concentration(SSBC) functions simultaneously.We develop an optimization algorithm,through which the SSBC DOE can be optimized within an arbitrary thickness range according to the limitations of modern photolithography technology.Theoretical simulation results reveal that the designed SSBC DOE has a high optical focusing efficiency.It is expected that the designed SSBC DOE should have practical applications in high-efficiency solar cell systems.
文摘A new distribution scheme of decryption keys used in optical verification systems is proposed. The encryption procedure is digitally implemented with the use of an iteration algorithm in computer. Three target images corresponding to three wavelengths are encoded into three sets of phase-only masks (POMs) by a special distributing method. These three sets of POMs are assigned to three authorized users as the personal identification. A lensless optical system is used as the verification system. In the verification procedure, every two of the three authorized users can pass the verification procedure cooperatively, but only one user cannot do. Numerical simulation shows that the proposed distribution scheme of decryption keys not only can improve the security level of verification system, but also can bring convenience and flexibility for authorized users.
基金Project supported by the National Basic Research Program of China(Grant No.2013CBA01702)the National Natural Science Foundation of China(Grant Nos.11474206,91233202,11374216,and 11404224)+1 种基金the Scientific Research Project of Beijing Education Commission,China(Grant No.KM201310028005)the Scientific Research Base Development Program of the Beijing Municipal Commission of Education and the Beijing Youth Top-Notch Talent Training Plan,China(Grant No.CIT&TCD201504080)
文摘Diffractive optical elements(DOEs) with spectrum separation and beam concentration(SSBC) functions have important applications in solar cell systems. With the SSBC DOEs, the sunlight radiation is divided into several wave bands so as to be effectively absorbed by photovoltaic materials with different band gaps. A new method is proposed for designing high-efficiency SSBC DOEs, which is physically simple, numerically fast, and universally applicable. The SSBC DOEs are designed by the new design method, and their performances are analyzed by the Fresnel diffraction integral method.The new design method takes two advantages over the previous design method. Firstly, the optical focusing efficiency is heightened by up to 10%. Secondly, focal positions of all the designed wavelengths can be designated arbitrarily and independently. It is believed that the designed SSBC DOEs should have practical applications to solar cell systems.
基金supported by the National Natural Science Foundation of China(Grant Nos.91233202,21173260,and 51072221)the National Basic Research Program of China(Grant No.2012CB932903)
文摘Based on the facts that multijunction solar cells can increase the efficiency and concentration can reduce the cost dramatically, a special design of parallel multijunction solar cells was presented. The design employed a diffractive optical element (DOE) to split and concentrate the sunlight. A rainbow region and a zero-order diffraction region were generated on the output plane where solar cells with corresponding band gaps were placed. An analytical expression of the light intensity distribution on the output plane of the special DOE was deduced, and the limiting photovoltaic efficiency of such parallel multijunction solar ceils was obtained based on Shockley-Queisser's theory. An efficiency exceeding the Shockley--Queisser limit (33%) can be expected using multijunction solar cells consisting of separately fabricated subcells. The results provide an important alternative approach to realize high photovoltaic efficiency without the need for expensive epitaxial technology widely used in tandem solar cells, thus stimulating the research and application of high efficiency and low cost solar cells.
基金Project supported by the National Natural Science Foundation of China(Grants Nos.91233202,21173260,and 51072221)the National Basic Research Program of China(Grant No.2012CB932903
文摘Two improved algorithms are proposed to extend a diffractive optical element (DOE) to work under the broad spec- trum of sunlight. An optimum design has been found for the DOE, with a weighted average optical efficiency of about 6.8% better than that of the previous design. The optimization of designing high optical efficiency DOEs will pave the way for future designs of high-efficiency, low-cost lateral multijunction solar cells based on such a DOE.
基金Supported by the National Natural Science Foundation of China under Grant Nos 91233202,91433205 and 51421002the Chinese Academy of Sciences
文摘A spectrum-splitting and beam-concentrating (SSBC) diffractive optical element (DOE) for three-junction pho- tovoltaics (PV) system is designed and fabricated by five-circ/e micro-fabrication. The incident solar light is efficiently split into three sub-spectrum ranges and strongly concentrated on the focal plane, which can be di- rectly utilized by suitable spectrum-matching solar cells. The system concentration factor reaches 12x. Moreover, the designed wavelengths (450nm, 550nm and 65Onto) are spatially distributed on the focal plane, in good agree- ment with the theoretical results. The average optical effic/ency of all the cells over the three designed wavelengths is 60.07%. The SSBC DOE with a high concentration factor and a high optical efficiency provides a cost-effective approach to achieve higher PV conversion efficieneies.
基金Project supported by the State Key Development Program for Basic Research of China (Grant No 2002CCA03500), and the National Natural Science Foundation of China (Grant No 60177016).
文摘Based on a modified coupled wave theory of Kogelnik, we have studied the diffraction of an ultrashort pulsed beam with an arbitrary polarization state from a volume holographic grating in photorefractive LiNbO3 crystals. The results indicate that the diffracted intensity distributions in the spectral and temporal domains and the diffraction efficiency of the grating are both changed by the polarization state and spectral bandwidth of the input pulsed beam. A method is given of choosing the grating parameters and input conditions to obtain a large variation range of the spectral bandwidth of the diffracted pulsed beam with an appropriate diffraction efficiency. Our study presents a possibility of using a volume holographic grating recorded in anisotropic materials to shape a broadband ultrashort pulsed beam by modulating its polarization state.
基金support rendered by BRNS (DAE, India) for the project
文摘The oxidation of aluminium was studied using optical emission spectroscopy (OES) during the evaporation of aluminium in traces of oxygen in a thermal plasma reactor. The ratio of the measured line intensities of Al-O with that of Al follows the exact trend as of that obtained from the corresponding line intensities in X-ray diffraction spectra of the synthesized samples. In this paper the inherent capacity of emission spectroscopy in evaluating the growth processes under plasma induced reactions is presented.
文摘In the Fresnel transform domain, an effective improvement to the conventional iterative algorithm for designing the diffractive optical elements (DOEs) used for spatial beam shaping has been proposed. The algorithm can successfully achieve to design DOEs for beam shaping. Compared with conventional algorithm, this algorithm can provide faster convergence, more powerful ability to overcome local minimum problem and better shaping quality. By computer simulation, the result has shown that the DOEs designed by this algorithm has snch advantages as high uniformity at the main lobe, low profile error and steep edge.
文摘1 Introduction 1.1 Advantages of DOE 1)High diffraction efficiency; 2)Dispersive; 3)More selectivity of designing parameters; 4)More selectivity of primary materials; 5)Can make components miniature,forming array and integration. 1.2 1.3 megapixel triplet plastic mobile
基金partially supported by the National Key Basic Research Program of China(No.2013CB329202)the National Scientific Equipment Development SpecialFoundation of China(No.2011YQ03013401)+1 种基金the National Natural Science Foundation of China(No.61475021)the Beijing Natural Science Foundation(No.4152015)
文摘Diffractive optics is an important technique for beam shaping with high light efficiency and strong diffraction pattern flexibility. Since the diffraction angle is limited by the unit size of the diffractive optical element (DOE), the size of the required diffraction pattern is always rather small. In this Letter, refractive/diffractive hybrid optical elements (RDHOEs) consisting of a DOE and a lens are used to realize beam shaping for a large diffraction pattern. The lens, as the component of the RDHOEs, can not only be concave but also convex, and the double sampling Fresnel diffraction algorithm is developed for the design of these two types of RDHOEs. The simulation and experimental results provide solid evidence to demonstrate the proposed method with the pure phase spatial light modulator.
基金Project supported by the National Key Basic Research Special Foundation of China (Grant No 2007CB935302)the National Natural Science Foundation of China (Grant No 60825403)
文摘A novel diffractive optical element, named phase zone photon sieve (PZPS), is presented. There are three kinds of phase plates in PZPSs: PZPS1, PZPS2, and PZPS3. Each of the PZPSs has its own structure and is made on quartz substrate by etching. The three PZPSs have stronger diffraction peak intensity than a photon sieve (PS) when the margin pinhole and zone line width are kept the same. The PZPS3 can produce a smaller central diffractive spot than the ordinary PS with the same number of zones on the Fresnel zone plate. We have given the design method for and the simulation of PZPS and PS. PZPS has potential applications in optical maskless lithography.
基金This project is supported by the National Natural Science Foundation of China under the Grant No. 19970438.
文摘The matrix eigenvalue method is used to analyze a laser resonator composed of diffraction optical elements. The results show that this type of resonator can separate fundamental mode and high order modes effectively. The output beams can be designed for different requests.
基金NATO grant No.SPS-985048 is acknowledged for funding.
文摘Fresnel incoherent correlation holography(FINCH)is a self-interference based super-resolution three-dimensional imaging technique.FINCH in inline configuration requires an active phase modulator to record at least three phase-shifted camera shots to reconstruct objects without twin image and bias terms.In this study,FINCH is realized using a randomly multiplexed bifocal binary diffractive Fresnel zone lenses fabricated using electron beam lithography.The object space is calibrated by axially scanning a point object along the optical axis and recording the corresponding point spread holograms(PSHs).An object is mounted within the calibrated object space,and the object hologram was recorded under identical experimental conditions used for recording the PSHs.The image of the object at different depths was reconstructed by a cross-correlation between the object hologram and the PSHs.Application potential including bio-medical optics is discussed.
基金Project supported by the National Key Research and Development Program of China(Grant No.2017YFA0206004)the National Natural Science Foundation of China(Grant No.11375160)the Science and Technology Fund from the Plasma Physics Laboratory,China(Grant No.ZY2018-01)。
文摘Annular-focused beams have attracted attention because of their novel properties and applications in optical trapping, high resolution microscopy, and laser-induced periodic surface structuring. Generation of this beam is very important and necessary. In this article, a novel design of zone plate for forming the annular-focused beams is proposed. The design principle is introduced, and the characteristics of zone plate are analyzed by numerical simulation. The result shows that the zone plate can form a monochromatic ring-shaped intensity distribution in the focal plane. And the design method is also generally suitable for designing the other optical elements to generate the annular-focused beams.
基金This work has been partially supported by NIH(SC COBRE P20RR021949 and Career Award 1k25hl088262-01)NSF(MRI CBET-0923311 and SC EPSCoR RII EPS-0903795 through SC GEAR program)+3 种基金The National Natural Science Foundation of China(31171372,61078067)Guangdong Province Science and Technology Project(2010B060300002)Shenzhen University Application Technology Development Project(201136,CXB201104220021A,JC201005250032A,200854)the Fundamental Research Funds for the Central Universities(K50510050006).
文摘Multifocal multiphoton microscopy(MMM)has recently become an important tool in biomedicine for performing three-dimensional fastfluorescence imaging.Using various beamsplitting techniques,MMM splits the near-infrared laser beam into multiple beamlets and produces a multifocal array on the sample for parallel multiphoton excitation and then recordsfluorescence signal from all foci simultaneously with an area array detector,which significantly improves the imaging speed of multiphoton microscopy and allows for high efficiency in use of the excitation light.In this paper,we discuss the features of several MMM setups using different beamsplitting devices,including a Nipkow spinning disk,a microlens array,a set of beamsplitting mirrors,or a diffractive optical element(DOE).In particular,we present our recent work on the development of an MMM using a spatial light modulator(SLM).
文摘This review focuses on recent developments in additive manufacturing(AM)of precision optical devices,particularly devices consisting of components with critical features at the micro-and nanoscale.These include,but are not limited to,microlenses,diffractive optical elements,and photonic devices.However,optical devices with large-size lenses and mirrors are not specifically included as this technology has not demonstrated feasibilities in that category.The review is roughly divided into two slightly separated topics,the first on meso-and microoptics and the second on optics with nanoscale features.Although AM of precision optics is still in its infancy with many unanswered questions,the references cited on this exciting topic demonstrate an enabling technology with almost unlimited possibilities.There are many high quality reviews of AM processes of non-optical components,hence they are not the focus of this review.The main purpose of this review is to start a conversion on optical fabrication based on information about 3D AM methods that has been made available to date,with an ultimate long-term goal of establishing new optical manufacturing methods that are low cost and highly precise with extreme flexibility.
基金the US Air Force Office of Scientific Research funding(Grant No.FA9550-21-1-0324)。
文摘Large-scale linear operations are the cornerstone for performing complex computational tasks.Using optical computing to perform linear transformations offers potential advantages in terms of speed,parallelism,and scalability.Previously,the design of successive spatially engineered diffractive surfaces forming an optical network was demonstrated to perform statistical inference and compute an arbitrary complex-valued linear transformation using narrowband illumination.We report deep-learning-based design of a massively parallel broadband diffractive neural network for all-optically performing a large group of arbitrarily selected,complex-valued linear transformations between an input and output field of view,each with Ni and No pixels,respectively.This broadband diffractive processor is composed of Nw wavelength channels,each of which is uniquely assigned to a distinct target transformation;a large set of arbitrarily selected linear transformations can be individually performed through the same diffractive network at different illumination wavelengths,either simultaneously or sequentially(wavelength scanning).We demonstrate that such a broadband diffractive network,regardless of its material dispersion,can successfully approximate Nw unique complex-valued linear transforms with a negligible error when the number of diffractive neurons(N)in its design is≥2NwNiNo.We further report that the spectral multiplexing capability can be increased by increasing N;our numerical analyses confirm these conclusions for Nw>180 and indicate that it can further increase to Nw∼2000,depending on the upper bound of the approximation error.Massively parallel,wavelength-multiplexed diffractive networks will be useful for designing highthroughput intelligent machine-vision systems and hyperspectral processors that can perform statistical inference and analyze objects/scenes with unique spectral properties.
文摘Optical surface scattering analyses based on diffractive optics (DO) are typically applied to one surface;however, there is a need for simulating surface scattering losses for devices having many surface interactions such as light pipes. Light pipes are often simulated with geometric optics (GO) using ray tracing, where surface scattering is driven by the surface slope distribution. In the DO case, surface scattering analyses depend on the spatial frequency distribution and amplitude as well as wavelength, with the sinusoidal grating as a fundamental basis. A better understanding of the link, or transition, between DO and GO scattering domains would be helpful for efficiently incorporating scattering loss analyses into ray trace simulations. A formula for the root-mean-square (rms) scattered angle width of a sinusoidal reflection grating that depends only on the surface rms slope is derived from the nonparaxial scalar diffraction theory, thereby linking it to GO. The scatter angle’s mean and rms width are evaluated over a range of grating amplitudes and periods using scalar theory and full vector simulations from the COMSOL® wave optic module for a sinusoidal reflection grating. The conditions under which the diffraction-based solution closely approximates the GO solution, as predicted by the rms slope, are identified. Close agreement is shown between the DO and GO solutions for the same surface rms slope scattering loss due to angular filtering near the critical angle of a total internal reflection (TIR) glass-to-air interface.