The determination of the thickness and the optical dispersion property of gold film using spectroscopy of a surface plasmon in the frequency domain

We propose to use wavelength modulation approach,i.e.,the spectroscopy of a surface plasmon in the frequency domain,to characterize the optical dispersion property of gold film.Using this method,we determine the dispersion relationship of gold film in a wavelength range from 537.12 nm to 905.52 nm,and our results accord well with the reported results by other authors.This method is particularly suited for studying the optical dispersion properties of thin metal films,because a series of dielectric constants over a wide spectral range can be determined simultaneously via only a single scan of the incident angle,thereby avoiding the repeated measurements required when using the angular modulation approach.

Gap States of ZnO Thin Films by New Methods:Optical Spectroscopy,Optical Conductivity and Optical Dispersion Energy

The optical reflectance and transmittance spectra in the wavelength range of 300-2500 nm are used to compute the absorption coefficient of zinc oxide films annealed at different post-annealing temperatures 400, 500 and 600°C.The values of the cross point between the curves of the real and imaginary parts of the optical conductivity ɑ_1 and ɑ_1 with energy axis of films exhibit values that correspond to optical gaps and are about 3.25-3.3 eV. The maxima of peaks in plots dR/dλ and dT/dλ versus wavelength of films exhibit optical gaps at about 3.12-3.25 eV.The values of the fundamental indirect band gap obtained from the Tauc model are at about 3.14-3.2 eV. It can be seen that films annealed at 600°C have the minimum indirect optical band gap at about 3.15 eV. The films annealed at 600°C have Urbach＇s energy minimum of 1.38 eV and hence have minimum disorder. The dispersion energy d of films annealed at 500°C has the minimum value of 43 eV.

Growth,optical dispersion and magnetic behavior of Dy^(3+) doped yttrium iron garnet crystals

Y_(3)Fe_(5)O_(12)(YIG)crystals are highly desirable for the fabrication of mid-infrared isolators with the rapid growth of optical communications,although it is rather challenging to grow large size and high-quality single crystals.Dy^(3+)doping is expected to improve the optical and magneto-optical prope rties.However,high quality Dy:YIG crystals and the adjustment of Dy^(3+)on the structure and optical behavior of YIG crystal remain unclear,impeding its practical applications.Herein,a series of Y_(3-x)Dy_(x)Fe_(5)O_(12)(x=0,0.5,1.0,1.5,3)solid solution crystals was grown by the flux-Bridgman method and single crystals up to 25 mm were obtained.With the introduction of Dy^(3+),lattice parameters are gradually enlarged from 1.2379 nm(YIG)to 1.2420 nm(DyIG).Typical Dy^(3+)absorption peaks are observed around 1070,1265 and 1670 nm.The refractive index decreases from 2.37(500 nm)to 2.10(2500 nm)for YIG crystal,and it reduces from 2.47(500 nm)to 2.16(2500 nm)for DyIG crystal.The optical bandgaps remain almost unchanged for Dy:YIG crystals.The optical dispersion of the refractive indices was finely fitted by the Wemple and DiDomenico(WDD)and the Sellmeier models,respectively.With the increase of Dy^(3+)content,the saturation magnetization(Ms)decreases significantly from 23.62 emu/g(YIG)to 5.33 emu/g(DyIG).Small coercive field is persisted for this system,endowing small external magnetic field.These results provide valuable references for the manipulation of rare earths on the properties of magnetooptical crystals,which is beneficial to the design of high-performance garnet crystals for the application of optical switching and non-reciprocal related devices.

Spectral polarization-encoding of broadband laser pulses by optical rotatory dispersion and its applications in spectral manipulation

We propose a kind of spectral polarization-encoding(SPE)for broadband light pulses,which is realized by inducing optical rotatory dispersion(ORD),and decoded by compensating ORD.Combining with polarization-sensitive devices,SPE can not only work to control polarization-dependent transmission for central wavelength or bandwidth-tunable filtering,but also can be used for broadband regenerative or multi-pass amplification with a polarization-dependent gain medium to improve output bandwidth.SPE is entirely passive thus very simple to be designed and aligned.By using an ORD crystal with a good transmission beyond 3-μm mid-infrared region,e.g.,Ag Ga S_(2),SPE promises to be applied for the wavelength tuning lasers in mid-infrared region,where the tunning devices are rather under developed compared with those in visible and near-infrared region.

Dispersive Nonlinearity in Er-Doped Optical Fiber

Optical dispersive nonlinearities in Er-doped optical fiber are discussed and measured at the third window wavelength 1.55 μm for optical communications firstly. The experimental method, which is developed by us, is based on dynamic scanning for fixed-point-interference (DSFPI) of two fiber beams. The real part and complex value of the third-order susceptibility at the wavelength are also obtained from the measured Kerr coefficient and nonlinear-absorption coefficient reported elsewhere.

High-speed polarization mode dispersion compensation in a 43-Gb/s RZ-DQPSK transmission system over 1200 km of standard single-mode fibre

This paper reports that the designed optical polarization mode dispersion compensator shows a good performance under the real-time variation of differential group delay, state of polarization and principal state of polarization in a （40×43）-Gb/s dense-wavelength-multiplexing, 1200-km enhanced return-to-zero differential-quadrature-phase-shift- keying （RZ-DQPSK） system. The polarization mode dispersion tolerance of the system is improved by 26 ps using the optical polarization mode dispersion compensator. The short and long time stabilities are tested with the bit error ratio recorded.

Impact of Fiber Dispersion on Performance of Entanglement-Based Dispersive Optics Quantum Key Distribution

Dispersive optics quantum key distribution(DO-QKD)based on energy-time entangled photon pairs is an important QKD scheme.In DO-QKD,the arrival time of photons is used in key generation and security analysis,which would be greatly affected by fiber dispersion.In this work,we establish a theoretical model of the entanglement-based DO-QKD system,considering the protocol,physical processes(such as fiber transmission and single-photon detection),and the analysis of security tests.Based on this theoretical model,we investigate the influence of chromatic dispersion introduced by transmission fibers on the performance of DO-QKD.By analyzing the benefits and costs of dispersion compensation,the system performance under G.652 and G.655 optical fibers are shown,respectively.The results show that dispersion compensation is unnecessary for DO-QKD systems in campus networks and even metro networks.Whereas,it is still required in DO-QKD systems with longer fiber transmission distances.

Hybrid Dispersive Optical Solitons in Nonlinear Cubic-Quintic-Septic Schrödinger Equation

Certain hybrid prototypes of dispersive optical solitons that we are looking for can correspond to new or future behaviors, observable or not, developed or will be developed by optical media that present the cubic-quintic-septic law coupled, with strong dispersions. The equation considered for this purpose is that of non-linear Schrödinger. The solutions are obtained using the Bogning-Djeumen Tchaho-Kofané method extended to the new implicit Bogning’ functions. Some of the obtained solutions show that their existence is due only to the Kerr law nonlinearity presence. Graphical representations plotted have confirmed the hybrid and multi-form character of the obtained dispersive optical solitons. We believe that a good understanding of the hybrid dispersive optical solitons highlighted in the context of this work allows to grasp the physical description of systems whose dynamics are governed by nonlinear Schrödinger equation as studied in this work, allowing thereby a relevant improvement of complex problems encountered in particular in nonliear optaics and in optical fibers.

Comprehensive research on self phase modulation based optical delay systems

This paper comprehensively investigates the properties of self phase modulation based optical delay systems consisting of dispersion compensation fibre and highly nonlinear fibres. It researches into the impacts of power level launched into highly nonlinear fibres, conversion wavelength, dispersion slope, modulation format and optical filter bandwidth on the overall performance of optical delay systems. The results reveal that, if the power launched into highly nonlinear fibres is fixed, the time delay generally varies linearly with the conversion wavelength, but jumps intermittently at some conversion wavelengths. However, the time delay varies semi-periodically with the power launched into highly nonlinear fibres. The dispersion slope of highly nonlinear fibres has significant influence on the time delay, especially for the negative dispersion slope. The time delay differs with modulation formats due to the different combined interaction of nonlinearity and dispersion in fibres. The bandwidth of the optical filters also greatly affects the time delay because it determines the bandwidth of the passed signal in the self phase modulation based time delay systems. The output signal quality of the overall time delay systems depends on the conversion wavelength and input power level. The optimisation of the power level and conversion wavelength to provide the best output signal quality is made at the end of this paper.

Faraday anomalous dispersion optical filter at 133Cs weak 459 nm transition

A 459 nm Faraday anomalous dispersion optical filter（FADOF） working at the side wings of the cesium6S1∕2→ 7P1∕2transition with weak oscillator strength is achieved. The transmittance of the higher side wing reaches 98% at a temperature of 179°C and magnetic field above 323 G. The experimental results coincide with the theoretical predictions in 1982 and 1995, which were not realized in experiments for over three decades. Due to its high transmittance, high accuracy, and narrow linewidth, the 459 nm FADOF can be applied in underwater optical communications, the building of active optical clocks, and laser frequency stabilization in active optical clocks.

Ultraflat, broadband, and highly coherent supercontinuum generation in all-solid microstructured optical fibers with all-normal dispersion

High flatness, wide bandwidth, and high-coherence properties of supercontinuum(SC) generation in fibers are crucial in many applications. It is challenging to achieve SC spectra in a combination of the properties, since special dispersion profiles are required, especially when pump pulses with duration over 100 fs are employed. We propose an all-solid microstructured fiber composed only of hexagonal glass elements. The optimized fiber possesses an ultraflat all-normal dispersion profile, covering a wide wavelength interval of approximately 1.55 μm. An SC spectrum spanning from approximately 1030 to 2030 nm(corresponding to nearly one octave) with flatness<3 dB is numerically generated in the fiber with 200 fs pump pulses at 1.55 μm. The results indicate that the broadband ultraflat SC sources can be all-fiber and miniaturized due to commercially achievable 200-fs fiber lasers. Moreover, the SC pulses feature high coherence and a single pulse in the time domain, which can be compressed to 13.9-fs pulses with high quality even for simple linear chirp compensation. The Fourier-limited pulse duration of the spectrum is 3.19 fs, corresponding to only 0.62 optical cycles.

The characters of dense dispersion managed soliton in optical fiber transmission systems

The properties of ultra-short dense dispersion-managed soliton (DBMS) in optical fiber links are investigated. They show some excellent characters, such as, reducing pulse's breathing extent greatly, facing fewer mutual interactions and tolerating larger local dispersion. In general, DBMS is more stable than a conventional dispersion-managed soliton in high-capacity systems. Excessively dense dispersion compensation is more suitable for systems with weak nonlinear effect.

Optical constants and their dispersion of Ag-MgF_2 nanoparticle composite films

Ag-MgF_2 composite films with different Ag fractions were prepared through a co-evaporation method. Microstructure analysis shows that the films are composed of amorphous MgF_2 matrix and embedded fcc-Ag nanoparticles. The optical constants and their dispersion of the films, within the wavelength range of 250 - 650 nm, were measured by reflecting spectroscopic ellipsometry. The maximum of the imaginary part ε~″ of the complex dielectric permittivity attributing to the surface plasmon resonance polarization of the Ag nanoparticles in an Ag-MgF_2 film, and the tangent of the phase-shift angle δ resulting from the dielectric loss of the film, occur at λ= 435 nm and λ= 420 nm, respectively. Based on Maxwell-Garnett effective medium theory, the experimentally observed dispersion spectra were reasonably described.

High-precision group-delay dispersion measurements of optical fibers via fingerprint-spectral wavelength-to-time mapping

The group-delay dispersion of an optical fiber was measured with the time-of-flight method, using fingerprint-like characteristic spectra from a mode-locked fiber laser source. To determine the group-delay dispersion up to the fourth order, least-squares fitting was applied to the overall time waveform mapped on the time axis for the fingerprint-spectral broadband pulses through a long optical fiber. The analysis of all 4003 data points reduced statistical uncertainty, and provided second-, third-, and fourth-order dispersion with uncertainties of 0.02%, 0.4%, and 4%,respectively.

Er-doped concentric-cores optical fiber for simultaneous amplification and compensation of positive dispersion

The Er-doped concentric-cores dispersion compensating fiber (EDDCF) has been demonstrated. The rare earth has been doped as a ring around the inner core. We have obtained 14-dB gain at 1550 nm (using 100-mW pump power and 980-nm wavelength) with dispersion of about -165 ps/(km·nm). It is useful for the optical fiber network where amplification as well as negative dispersion are necessary.

Dispersion compensation using high-positive dispersive optical fibers

The common and traditional method for optical dispersion compensation is concatenating the transmitting optical fiber by a compensating optical fiber having a high-negative dispersion coefficient. In this Letter, we take the opposite direction and show how an optical fiber with a high-positive dispersion coefficient is used for dispersion compensation. Our optical dispersion compensating structure is the optical implementation of an iterative algorithm in signal processing. The proposed dispersion compensating system is constructed by cascading a number of compensating sub-systems, and its compensation capability is improved by increasing the number of embedded sub-systems. We also show that the compensation capability is a trade-off between the transmission length and bandwidth. We use the simulation results to validate the performance of the introduced dispersion compensating module. Photonic crystal fibers with high-positive dispersion coefficients can be used for constructing the proposed optical dispersion compensating module.

Ultra-Short Pulse Tracking by Using Wavelength Dispersion for a Short-Time Optical Buffer

To synchronize a control signal with a packet signal in response to changing timing jitter, we investigate ultra-short pulse tracking by using wavelength dispersion for a short-time optical buffer in an optical router.

Optical filter based on internal reflection and optical rotatory dispersion of NaBrO_3 crystal

Based on the optical rotatory dispersion and zero reflection of the p-polarization light at the Brewster angle, a novel optical filter that employs only one NaBrO3 crystal and one polarizer are proposed and demonstrated. Performance of the optical filter is studied both theoretically and experimentally. Results show that the green light is becomes nearly extinct when the angles of the polarizer are set at 80°and 260°, whereas the red light becomes nearly extinct when the angles of the polarizer are set at 116°and 296°.Isolation of more than 8 dB can be achieved. The measured extinction ratios are 12.3 and 12.6 dB for green and red lights, respectively.

First principles study and comparison of vibrational and thermodynamic properties of XBi(X=In,Ga,B,Al)

In the present work, vibrational and thermodynamic properties of XBi（X = B, Al, Ga, In） compounds are compared and investigated. The calculation is carried out using density functional theory（DFT） within the generalized gradient approximation（GGA） in a plane wave basis, with ultrasoft pseudopotentials. The lattice dynamical properties are calculated using density functional perturbation theory（DFPT） as implemented in Quantum ESPRESSO（QE） code. Thermodynamic properties involving phonon density of states（DOS） and specific heat at constant volume are investigated using quasiharmonic approximation（QHA） package within QE. The phonon dispersion diagrams for InBi, GaBi, BBi, and AlBi indicate that there is no imaginary phonon frequency in the entire Brillouin zone, which proves the dynamical stability of these materials. BBi has the highest thermal conductivity and InBi has the lowest thermal conductivity. AlBi has the largest and GaBi has the smallest reststrahlen band which somehow suggests the polar property of XBi materials. The phonon gaps for InBi, GaBi, BBi and AlBi are about 160 cm^-1, 150 cm^-1, 300 cm^-1, and 150 cm^-1, respectively. For all compounds,the three acoustic modes near the gamma point have a linear behavior. C_V is a function of T-3 at low temperatures while for higher temperatures it asymptotically tends to a constant as expected.

Influence of optical filtering on transmission capacity in single mode fiber communications

This paper presents the design and analysis of optical filters that are placed at the output of directly modulated vertical cavity surface emitting laser （VCSEL） in the process of inexpensive transmitter＇s implementation for upcoming generation optical access network. Generation of non return to zero （NRZ） optical signal from the transmitter for 110 km error-free single mode fiber （SMF） transmission at 10 Gb/s with bit error rate （BER） of 10-30 in the absence of the external modulator and encoder was proposed. Effects of super-Gaussian and Butterworth optical filters at VCSEL output were demonstrated to maximize performance of SMF optical systems without need of any dispersion compensation technique.