We theoretically and experimentally investigate the wave front distortion in critically phase-matched continuouswave（CW） second harmonic generation（SHG）.Due to the walk-off effect in the nonlinear crystal,the gene...We theoretically and experimentally investigate the wave front distortion in critically phase-matched continuouswave（CW） second harmonic generation（SHG）.Due to the walk-off effect in the nonlinear crystal,the generated second harmonic is extremely elliptical and quite non-Gaussian,which causes a very low matching and coupling efficiency in experiment.Cylindrical lenses and walk-off compensating crystals are adopted to correct distorted wave fronts,and obtain a good TEM00 mode efficiently.Theoretically,we simulate the correction effect of 266-nm laser generated with SHG.The experiment results accord well with the theoretical simulation and an above 80% TEM_（00） component is obtained for 266-nm continuous-wave laser with a 4.8？-walk-off angle in beta barium borate（BBO） crystal.展开更多
We propose a technique for chromatic dispersion monitoring based on optical time domain level monitoring. Experimental and simulation results show that the technique is effective for the monitoring of dispersion in 42...We propose a technique for chromatic dispersion monitoring based on optical time domain level monitoring. Experimental and simulation results show that the technique is effective for the monitoring of dispersion in 42.7-Gbps CS-RZ signals for dynamic dispersion compensation.展开更多
Passive inter-modulation （PIM） is a form of nonlinear distortion caused by the inherent nonlinearities of the passive devices and components in RF/microwave system. It will degenerate the performance of communicatio...Passive inter-modulation （PIM） is a form of nonlinear distortion caused by the inherent nonlinearities of the passive devices and components in RF/microwave system. It will degenerate the performance of communication system with broad-band channel and high-sensitivity receiver. Therefore, it is necessary to construct a model to simulate this process in order to predict the level of PIM. This paper is aimed at constructing some plate models with one-dimensional and two-dimensional contact nonlinearity sections illuminated by two-tone waves, and calculating the scattered field at a fixed-point in space using time-domain physical optics method. By taking fast Fourier transform （FFT）, we get the spectrum of the scattered field and then analyze the generated PIM products. At the end of this paper, some numerical examples are presented to show the influence rules of the relative factors on PIM. The results indicate the variation of the level of PIM with the number of the nonlinear regions, the nonlinear spacing, and the incident power levels.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.91436103)Research Programme of National University of Defense Technology,China(Grant No.JC15-02-03)
文摘We theoretically and experimentally investigate the wave front distortion in critically phase-matched continuouswave（CW） second harmonic generation（SHG）.Due to the walk-off effect in the nonlinear crystal,the generated second harmonic is extremely elliptical and quite non-Gaussian,which causes a very low matching and coupling efficiency in experiment.Cylindrical lenses and walk-off compensating crystals are adopted to correct distorted wave fronts,and obtain a good TEM00 mode efficiently.Theoretically,we simulate the correction effect of 266-nm laser generated with SHG.The experiment results accord well with the theoretical simulation and an above 80% TEM_（00） component is obtained for 266-nm continuous-wave laser with a 4.8？-walk-off angle in beta barium borate（BBO） crystal.
文摘We propose a technique for chromatic dispersion monitoring based on optical time domain level monitoring. Experimental and simulation results show that the technique is effective for the monitoring of dispersion in 42.7-Gbps CS-RZ signals for dynamic dispersion compensation.
文摘Passive inter-modulation （PIM） is a form of nonlinear distortion caused by the inherent nonlinearities of the passive devices and components in RF/microwave system. It will degenerate the performance of communication system with broad-band channel and high-sensitivity receiver. Therefore, it is necessary to construct a model to simulate this process in order to predict the level of PIM. This paper is aimed at constructing some plate models with one-dimensional and two-dimensional contact nonlinearity sections illuminated by two-tone waves, and calculating the scattered field at a fixed-point in space using time-domain physical optics method. By taking fast Fourier transform （FFT）, we get the spectrum of the scattered field and then analyze the generated PIM products. At the end of this paper, some numerical examples are presented to show the influence rules of the relative factors on PIM. The results indicate the variation of the level of PIM with the number of the nonlinear regions, the nonlinear spacing, and the incident power levels.
