The phase modulation and the closed-loop controller can generate electrical crosstalk-coupling in digital closed- loop fibre optic gyro. Four electrical cross-coupling paths are verified by the open-loop testing appro...The phase modulation and the closed-loop controller can generate electrical crosstalk-coupling in digital closed- loop fibre optic gyro. Four electrical cross-coupling paths are verified by the open-loop testing approach. It is found the variation of ramp amplitude will lead to the alternation of gyro bias. The amplitude and the phase parameters of the electrical crosstalk signal are measured by lock-in amplifier, and the variation of gyro bias is confirmed to be caused by the alternation of phase according to the amplitude of the ramp. A digital closed-loop fibre optic gyro electrical crosstalk-coupling model is built by approximating the electrical cross-coupling paths as a proportion and integration segment. The results of simulation and experiment show that the modulation signal electrical crosstalk-coupling can cause the dead zone of the gyro when a small angular velocity is inputted, and it could also lead to a periodic vibration of the bias error of the gyro when a large angular velocity is inputted.展开更多
The design,fabrication and performance of 1.3μm superluminescent diodes are reported.A InP window structure and a passive absorber waveguide in different plane are applied to suppress lasing oscillation.A buried cres...The design,fabrication and performance of 1.3μm superluminescent diodes are reported.A InP window structure and a passive absorber waveguide in different plane are applied to suppress lasing oscillation.A buried crescent structure similar to a laser diode is introduced to achieve high output power.The output power of about 70O μW is coupled into a single-mode fiber at 150 mA and 25℃.Spectrum width is more than 30 nm.The devices operate in superluminescent state in the range from 0℃ to 60℃.展开更多
基金Project supported by the National High Technology Research and Development Program of China (Grant No. 2007AA04Z436)
文摘The phase modulation and the closed-loop controller can generate electrical crosstalk-coupling in digital closed- loop fibre optic gyro. Four electrical cross-coupling paths are verified by the open-loop testing approach. It is found the variation of ramp amplitude will lead to the alternation of gyro bias. The amplitude and the phase parameters of the electrical crosstalk signal are measured by lock-in amplifier, and the variation of gyro bias is confirmed to be caused by the alternation of phase according to the amplitude of the ramp. A digital closed-loop fibre optic gyro electrical crosstalk-coupling model is built by approximating the electrical cross-coupling paths as a proportion and integration segment. The results of simulation and experiment show that the modulation signal electrical crosstalk-coupling can cause the dead zone of the gyro when a small angular velocity is inputted, and it could also lead to a periodic vibration of the bias error of the gyro when a large angular velocity is inputted.
文摘The design,fabrication and performance of 1.3μm superluminescent diodes are reported.A InP window structure and a passive absorber waveguide in different plane are applied to suppress lasing oscillation.A buried crescent structure similar to a laser diode is introduced to achieve high output power.The output power of about 70O μW is coupled into a single-mode fiber at 150 mA and 25℃.Spectrum width is more than 30 nm.The devices operate in superluminescent state in the range from 0℃ to 60℃.
