High resolution imaging is achieved using increasingly larger apertures and successively shorter wavelengths.Optical aperture synthesis is an important high-resolution imaging technology used in astronomy.Conventional...High resolution imaging is achieved using increasingly larger apertures and successively shorter wavelengths.Optical aperture synthesis is an important high-resolution imaging technology used in astronomy.Conventional long baseline amplitude interferometry is susceptible to uncontrollable phase fluctuations,and the technical difficulty increases rapidly as the wavelength decreases.The intensity interferometry inspired by HBT experiment is essentially insensitive to phase fluctuations,but suffers from a narrow spectral bandwidth which results in a lack of effective photons.In this study,we propose optical synthetic aperture imaging based on spatial intensity interferometry.This not only realizes diffraction-limited optical aperture synthesis in a single shot,but also enables imaging with a wide spectral bandwidth,which greatly improves the optical energy efficiency of intensity interferometry.And this method is insensitive to the optical path difference between the sub-apertures.Simulations and experiments present optical aperture synthesis diffraction-limited imaging through spatial intensity interferometry in a 100 nm spectral width of visible light,whose maximum optical path difference between the sub-apertures reaches 69λ.This technique is expected to provide a solution for optical aperture synthesis over kilometer-long baselines at optical wavelengths.展开更多
Co-phasing between different sub-apertures is important for sparse optical synthetic aperture telescope systems to achieve high-resolution imaging. For co-phasing detection in such a system, a new aspect of the system...Co-phasing between different sub-apertures is important for sparse optical synthetic aperture telescope systems to achieve high-resolution imaging. For co-phasing detection in such a system, a new aspect of the system＇s far-field interferometry is analysed and used to construct a novel method to detect piston errors. An optical setup is built to demonstrate the efficacy of this method. Experimental results show that the relative differences between measurements by this method and the criterion are less than 4%, and their residual detecting errors are about 0.01 A for different piston errors, which makes the use of co-phasing detection within such a system promising.展开更多
A model based on Fourier domain consideration on aperture configuration of optical synthetic aperture imaging system is introduced in this paper. The derivation of the model is directly linked to the restoration error...A model based on Fourier domain consideration on aperture configuration of optical synthetic aperture imaging system is introduced in this paper. The derivation of the model is directly linked to the restoration error of the original object from the recorded image. The aperture configuration is a function of the maximum frequency of interest, and takes into account the diameter of the aperture. The simulative results of genetic algorithms illustrate the usefulness of this model lot designing a synthetic aperture optical imaging system, and the aperture configuration of a good synthetic aperture optical imaging system should be non-redundant.展开更多
This paper proposes a theoretical analysis for the characteristics of an external cavity Nd：YAG laser with feedback of multiple-beam interference, which is induced by the multi-reentrance of the light from the extern...This paper proposes a theoretical analysis for the characteristics of an external cavity Nd：YAG laser with feedback of multiple-beam interference, which is induced by the multi-reentrance of the light from the external Fabry-Perot cavity. The theoretical model considers the multiple beam interference of the external Fabry-Perot cavity. It is found that the optical feedback signals are distorted to pulse waveforms instead of the sinusoidal ones in conventional feedback. The experimental results are in good agreement with the theoretical analysis. The obtained theoretical and experimental results can advance the development of a laser feedback interferometer.展开更多
Thin cuprous oxide films have been prepared by chemical vapor deposition(pulsed spray evaporation-chemical vapor deposition)method without post-treatment.The synthesis of cuprous oxide was produced by applying a water...Thin cuprous oxide films have been prepared by chemical vapor deposition(pulsed spray evaporation-chemical vapor deposition)method without post-treatment.The synthesis of cuprous oxide was produced by applying a water strategy effect.Then,the effect of water on the morphology,topology,structure,optical properties and surface composition of the obtained films has been comprehensively investigated.The results reveal that a pure phase of Cu2O was obtained.The introduction of a small quantity of water in the liquid feedstock lowers the band gap energy from 2.16 eV to 2.04 eV.This finding was mainly related to the decrease of crystallite size due to the effect of water.The topology analyses,by using atomic force microscope,also revealed that surface roughness decreases with water addition,namely more uniform covered surface.Moreover,theoretical calculations based on density functional theory method were performed to understand the adsorption and reaction behaviors of water and ethanol on the Cu2O thin film surface.Formation mechanism of the Cu2O thin film was also suggested and discussed.展开更多
Spectral domain optical coherence tomography(SDOCT)is a noninvasive,cross-sectional imaging technique that measures depth resolved reflectance of tissue by Fourier transforming the spectral interferogram with the scan...Spectral domain optical coherence tomography(SDOCT)is a noninvasive,cross-sectional imaging technique that measures depth resolved reflectance of tissue by Fourier transforming the spectral interferogram with the scanning of the reference avoided.Interferometric synthetic aperture microscopy(ISAM)is an optical microscopy computed-imaging technique for measuring the optical properties of biological tissues,which can overcome the compromise between depth of focus and transverse resolution.This paper describes the principle of SDOCT and ISAM,which multiplexes raw acquisitions to provide quantitatively meaningful data with reliable spatially invariant resolution at all depths.A mathematical model for a coherent microscope with a planar scanning geometry and spectral detection was described.The two-dimensional fast Fourier transform(FFT)of spectral data in the transverse directions was calculated.Then the nonuniform ISAM resampling and filtering was implemented to yield the scattering potential within the scalar model.Inverse FFT was used to obtain the ISAM reconstruction.One scatterer,multiple scatterers,and noisy simulations were implemented by use of ISAM to catch spatially invariant resolution.ISAM images were compared to those obtained using standard optical coherence tomography(OCT)methods.The high quality of the results validates the rationality of the founded model and that diffraction limited resolution can be achieved outside the focal plane.展开更多
Under five stipulations, the detection process of the amount of the information on azimuthand distance with the synthetic aperture radar (SAR) is equivalent to the imaging processof an optical system. The information ...Under five stipulations, the detection process of the amount of the information on azimuthand distance with the synthetic aperture radar (SAR) is equivalent to the imaging processof an optical system. The information carrier is Fresnel prolate spheroidal wave function(FPSWF) Φ_n(c, x'_1, y'_1), and its imaging equation is the eigen integral equation, which is satis-fied by FPSWF. Based on the study of eigen values λ_n(c_s) and λ_n(c_t) the expressions ofthe amount of optical information transfer red by synthetic aperture radar from the objectspace to the image space is obtained.展开更多
Diamonds are wide-gap semiconductors possessing excellent physical and chemical properties; thus, they are regarded as very appropriate materials for optoelectronic devices. Based on the Kerr effect, we introduce a si...Diamonds are wide-gap semiconductors possessing excellent physical and chemical properties; thus, they are regarded as very appropriate materials for optoelectronic devices. Based on the Kerr effect, we introduce a simple and feasible method for measuring the third-order nonlinear optical susceptibility of synthetic diamonds. In the experiments, synthetic type I diamond samples and transverse electro-optic modulation systems are utilized. As for the laser with the wavelength of 650 nm, the third-order susceptibility and Kerr coefficient of the diamond samples are obtained at X1212（3） = 2.17 × 10^-23 m2/V2 and S44 = 1.93 ×12^-23 m2/V2, respectively.展开更多
基金supported by National Natural Foundation of China(Grant No.61991454)the project of CAS Interdisciplinary Innovation Team。
文摘High resolution imaging is achieved using increasingly larger apertures and successively shorter wavelengths.Optical aperture synthesis is an important high-resolution imaging technology used in astronomy.Conventional long baseline amplitude interferometry is susceptible to uncontrollable phase fluctuations,and the technical difficulty increases rapidly as the wavelength decreases.The intensity interferometry inspired by HBT experiment is essentially insensitive to phase fluctuations,but suffers from a narrow spectral bandwidth which results in a lack of effective photons.In this study,we propose optical synthetic aperture imaging based on spatial intensity interferometry.This not only realizes diffraction-limited optical aperture synthesis in a single shot,but also enables imaging with a wide spectral bandwidth,which greatly improves the optical energy efficiency of intensity interferometry.And this method is insensitive to the optical path difference between the sub-apertures.Simulations and experiments present optical aperture synthesis diffraction-limited imaging through spatial intensity interferometry in a 100 nm spectral width of visible light,whose maximum optical path difference between the sub-apertures reaches 69λ.This technique is expected to provide a solution for optical aperture synthesis over kilometer-long baselines at optical wavelengths.
基金Project supported by the Young Scientists Fund of the National Natural Science Foundation of China (Grant No. 61008038)
文摘Co-phasing between different sub-apertures is important for sparse optical synthetic aperture telescope systems to achieve high-resolution imaging. For co-phasing detection in such a system, a new aspect of the system＇s far-field interferometry is analysed and used to construct a novel method to detect piston errors. An optical setup is built to demonstrate the efficacy of this method. Experimental results show that the relative differences between measurements by this method and the criterion are less than 4%, and their residual detecting errors are about 0.01 A for different piston errors, which makes the use of co-phasing detection within such a system promising.
文摘A model based on Fourier domain consideration on aperture configuration of optical synthetic aperture imaging system is introduced in this paper. The derivation of the model is directly linked to the restoration error of the original object from the recorded image. The aperture configuration is a function of the maximum frequency of interest, and takes into account the diameter of the aperture. The simulative results of genetic algorithms illustrate the usefulness of this model lot designing a synthetic aperture optical imaging system, and the aperture configuration of a good synthetic aperture optical imaging system should be non-redundant.
基金Project supported by the National Natural Science Foundation of China (Grant No. 50805084)China Postdoctoral Science Foundation (Grant Nos. 20080430395 and 200902087)
文摘This paper proposes a theoretical analysis for the characteristics of an external cavity Nd：YAG laser with feedback of multiple-beam interference, which is induced by the multi-reentrance of the light from the external Fabry-Perot cavity. The theoretical model considers the multiple beam interference of the external Fabry-Perot cavity. It is found that the optical feedback signals are distorted to pulse waveforms instead of the sinusoidal ones in conventional feedback. The experimental results are in good agreement with the theoretical analysis. The obtained theoretical and experimental results can advance the development of a laser feedback interferometer.
基金supported by the Ministry of Science and Technology of China(No.2017YFA0402800)the National Natural Science and Technology of China(No.91541102 and No.51476168)+2 种基金the support by Chinese Academy of Sciences for Senior International Scientists within President’s International Fellowship Initiative(PIFI)programthe financial support during his Ph.D.research stay at Bielefeld UniversityThe Moroccan institute of IRESEN is acknowledged for the financial support(Innowind13 Nanolubricant)
文摘Thin cuprous oxide films have been prepared by chemical vapor deposition(pulsed spray evaporation-chemical vapor deposition)method without post-treatment.The synthesis of cuprous oxide was produced by applying a water strategy effect.Then,the effect of water on the morphology,topology,structure,optical properties and surface composition of the obtained films has been comprehensively investigated.The results reveal that a pure phase of Cu2O was obtained.The introduction of a small quantity of water in the liquid feedstock lowers the band gap energy from 2.16 eV to 2.04 eV.This finding was mainly related to the decrease of crystallite size due to the effect of water.The topology analyses,by using atomic force microscope,also revealed that surface roughness decreases with water addition,namely more uniform covered surface.Moreover,theoretical calculations based on density functional theory method were performed to understand the adsorption and reaction behaviors of water and ethanol on the Cu2O thin film surface.Formation mechanism of the Cu2O thin film was also suggested and discussed.
文摘Spectral domain optical coherence tomography(SDOCT)is a noninvasive,cross-sectional imaging technique that measures depth resolved reflectance of tissue by Fourier transforming the spectral interferogram with the scanning of the reference avoided.Interferometric synthetic aperture microscopy(ISAM)is an optical microscopy computed-imaging technique for measuring the optical properties of biological tissues,which can overcome the compromise between depth of focus and transverse resolution.This paper describes the principle of SDOCT and ISAM,which multiplexes raw acquisitions to provide quantitatively meaningful data with reliable spatially invariant resolution at all depths.A mathematical model for a coherent microscope with a planar scanning geometry and spectral detection was described.The two-dimensional fast Fourier transform(FFT)of spectral data in the transverse directions was calculated.Then the nonuniform ISAM resampling and filtering was implemented to yield the scattering potential within the scalar model.Inverse FFT was used to obtain the ISAM reconstruction.One scatterer,multiple scatterers,and noisy simulations were implemented by use of ISAM to catch spatially invariant resolution.ISAM images were compared to those obtained using standard optical coherence tomography(OCT)methods.The high quality of the results validates the rationality of the founded model and that diffraction limited resolution can be achieved outside the focal plane.
基金Project supported by the National Natural Science Foundation of China.
文摘Under five stipulations, the detection process of the amount of the information on azimuthand distance with the synthetic aperture radar (SAR) is equivalent to the imaging processof an optical system. The information carrier is Fresnel prolate spheroidal wave function(FPSWF) Φ_n(c, x'_1, y'_1), and its imaging equation is the eigen integral equation, which is satis-fied by FPSWF. Based on the study of eigen values λ_n(c_s) and λ_n(c_t) the expressions ofthe amount of optical information transfer red by synthetic aperture radar from the objectspace to the image space is obtained.
基金supported by the National Natural Science Foundation of China (Nos. 60976043 and 60976037)the Collaborative Projects of NSFC-RFBR Agreement (Nos. 60711120182 and 60811120023)the National "863" Program of China (No. 2009AA03Z419)
文摘Diamonds are wide-gap semiconductors possessing excellent physical and chemical properties; thus, they are regarded as very appropriate materials for optoelectronic devices. Based on the Kerr effect, we introduce a simple and feasible method for measuring the third-order nonlinear optical susceptibility of synthetic diamonds. In the experiments, synthetic type I diamond samples and transverse electro-optic modulation systems are utilized. As for the laser with the wavelength of 650 nm, the third-order susceptibility and Kerr coefficient of the diamond samples are obtained at X1212（3） = 2.17 × 10^-23 m2/V2 and S44 = 1.93 ×12^-23 m2/V2, respectively.
