Structure,electronic,and nonlinear optical properties of superalkaline M_(3)O(M=Li,Na)doped cyclo[18]carbon

Cyclo[18]carbon has received considerable attention thanks to its novel geometric configuration and special electronic structure.Superalkalis have low ionization energy.Doping a superalkali in cyclo[18]carbon is an effective method to improve the optical properties of the system because considerable electron transfer occurs.In this paper,the geometry,bonding properties,electronic structure,absorption spectrum,and nonlinear optical(NLO)properties of superalkaline M_(3)O(M=Li,Na)-doped cyclo[18]carbon were studied by using density functional theory.M_(3)O and the C_(18) rings are not coplanar.The C_(18) ring still exhibits alternating long and short bonds.The charge transfer between M_(3)O and C_(18) forms stable[M_(3)O]+[C_(18)]-ionic complexes.C_(18)M_(3)O(M=Li,Na)shows striking optical nonlinearity,i.e.,their first-and second-order hyperpolarizability(βvec andγ||)increase considerably atλ=1907 nm and 1460 nm.

Theoretical Study on the Optical Properties for 2,7- and 3,6-Linked Carbazole Trimers by Time-dependent Density Functional Theory

Electronic properties, such as HOMO and LUMO energies, band gaps, ionization potential （IP） and electron affinity （EA） of 2,7- and 3,6-1inked carbazole trimers, two conjugated oligomcrs with different linkages of carbazole, were studicd by the density functional theory with Becke-Lee-Young-Parr composite exchange correlation functional （B3LYP）. The absorption spectra of these compounds were also investigated by time-dependent density functional theory （TD-DFT） with 6-3 IG＊ basis set. The calculated results indicated that the HOMO and LUMO of the 2,7- and 3,6-1inked carbazole trimers are both slightly destabilized on going from methyl substitution to sec-butyl substitution. Both IP and EA exhibit their good hole-transporting but poor electronaccepting ability. The presence of alkyl groups on the nitrogen atoms does not affect the intra-chain electronic delocalization along the molecular frame. Thus no significant effect on the band gap and absorption spectra of compounds has been found.

Electronic and Optical Properties of Rocksalt CdO: A first-Principles Density-Functional Theory Study

The structural, electronic and optical properties of rocksalt CdO have been studied using the plane-wave-based pseudo-potential density functional theory within generalized gradient approximation. The calculated lattice parameters are in agreement with previous experimental work. The band structure, density of states, and Mulliken charge population are obtained, which indicates that rocksalt CdO having the properties of a halfmetal due to an indirect band gap of -0.51eV. The mechanical properties show that rocksalt CdO is mechanically stable, isotropic and malleable. Significantly, we propose a correct value for ε1(0) of about 4.75, which offers theoretical data for the design and application for rocksalt CdO in optoelectronic materials.

Electronic, optical properties, surface energies and work functions of Ag_8SnS_6: First-principles method

Ternary metal chalcogenide semiconductor Ag8 Sn S6, which is an efficient photocatalyst under visible light radiation,is studied by plane-wave pseudopotential density functional theory. After geometry optimization, the electronic and optical properties are studied. A scissor operator value of 0.81 e V is introduced to overcome the underestimation of the calculation band gaps. The contribution of different bands is analyzed by virtue of total and partial density of states. Furthermore, in order to understand the optical properties of Ag8 Sn S6, the dielectric function, absorption coefficient, and refractive index are also performed in the energy range from 0 to 11 e V. The absorption spectrum indicates that Ag8 Sn S6has a good absorbency in visible light area. Surface energies and work functions of（411）,（4 13）,（21 1）, and（112） orientations have been calculated. These results reveal the reason for an outstanding photocatalytic activity of Ag8 Sn S6.

First-principles study of the electronic structure and optical properties of cubic Perovskite NaMgF_3

The structural, electronic, and optical properties of cubic perovskite NaMgF3 are calculated by plane-wave pseudopo- tential density functional theory. The calculated lattice constant a0, bulk modulus B0, and the derivative of bulk modulus B~ are 3.872/~, 78.2 GPa, and 3.97, respectively. The results are in good agreement with the available experimental and theo- retical values. The electronic structure shows that cubic NaMgF3 is an indirect insulator with a wide forbidden band gap of Eg = 5.90 eV. The contribution of the different bands is analyzed by total and partial density of states curves. Population analysis of NaMgF3 indicates that there is strong ionic bonding in the MgF2 unit, and a mixture of ionic and weak covalent bonding in the NaF unit. Calculations of dielectric function, absorption coefficient, refractive index, electronic energy loss spectroscopy, optical reflectivity, and conductivity are also performed in the energy range 0 to 70 eV.

First-principles study of the electronic and optical properties of ZnO nanowires

The geometric, energetic, electronic structures and optical properties of ZnO nanowires （NWs） with hexagonal cross sections are investigated by using the first-principles calculation of plane wave ultra-soft pseudo-potential technology based on the density functional theory （DFT）. The calculated results reveal that the initial Zn-O double layers merge into single layers after structural relaxations, the band gap and binding energies decrease with the increase of the ZnO nanowire size. Those properties show great dimension and size dependence. It is also found that the dielectric functions of ZnO NWs have different peaks with respect to light polarization, and the peaks of ZnO NWs exhibit a significant blueshift in comparison with those of bulk ZnO. Our results gives some reference to the thorough understanding of optical properties of ZnO, and also enables more precise monitoring and controlling during the growth of ZnO materials to be possible.

Structural, electronic, and optical properties of ZnO_(1-x)Se_x alloys using first-principles calculations

The structural, electronic, and optical properties of binary ZnO, ZnSe compounds, and their ternary ZnOl_xSex alloys are computed using the accurate full potential linearized augmented plane wave plus local orbital （FP-LAPW ＋ lo） method in the rocksalt （B 1） and zincblende （B3） crystallographic phases. The electronic band structures, fundamental energy band gaps, and densities of states for ZnO1_xSex are evaluated in the range 0 〈 x 〈 1 using Wu-Cohen （WC） generalized gradient approximation （GGA） for the exchange-correlation potential. Our calculated results of lattice parameters and bulk modulus reveal a nonlinear variation for pseudo-binary and their ternary alloys in both phases and show a considerable deviation from Vegard＇s law. It is observed that the predicted lattice parameter and bulk modulus are in good agreement with the available experimental and theoretical data. We establish that the composition dependence of band gap is semi-metallic in B1 phase, while a direct band gap is observed in B3 phase. The calculated density of states is described by taking into account the contribution of Zn 3d, O 2p, and Se 4s, and the optical properties are studied in terms of dielectric functions, refractive index, reflectivity, and energy loss function for the B3 phase and are compared with the available experimental data.

Bandgap engineering to tune the optical properties of Be_xMg_(1-x)X(X=S, Se, Te) alloys

Structural, electronic, and optical properties of alloys BexMgl-xX （X = S, Se, Te） in the assortment 0 〈 x 〈 1 were theoretically reported for the first time in zinc-blende （ZB） phase. The calculations were carried out by using full-potential linearized augmented plane wave plus local orbitals （FP-LAPW＋lo） formalism contained by the framework of density functional theory （DFT）. Wu--Cohen （WC） generalized gradient approximation （GGA）, based on optimization energy, has been applied to calculate these theoretical results. In addition, we used Becke and Johnson （mBJ-GGA） potential, modified form of GGA functional, to calculate electronic structural properties up to a high precision degree. The alloys were composed with the concentrations x = 0.25, 0.5, and 0.75 in pursuance of ＇special quasi-random structures＇ （SQS） approach of Zunger for the restoration of disorder around the observed site of alloys in the first few shells. The structural parameters have been predicted by minimizing the total energy in correspondence of unit cell volume. Our alloys established direct band gap at different concentrations that make their importance in optically active materials. Furthermore, density of states was discussed in terms of the contribution of Be and Mg s and chalcogen （S, Se, and Te） s and p states and observed charge density helped us to investigate the bonding nature. By taking into consideration of immense importance in optoelectronics of these materials, the complex dielectric function was calculated for incident photon energy in the range 0--15 eV.

First-principles investigation of electronic structure,effective carrier masses, and optical properties of ferromagnetic semiconductor CdCr_2S_4

The electronic structures, the effective masses, and optical properties of spinel CdCr_2S_4 are studied by using the fullpotential linearized augmented planewave method and a modified Becke–Johnson exchange functional within the densityfunctional theory. Most importantly, the effects of the spin–orbit coupling（SOC） on the electronic structures and carrier effective masses are investigated. The calculated band structure shows a direct band gap. The electronic effective mass and the hole effective mass are analytically determined by reproducing the calculated band structures near the BZ center.SOC substantially changes the valence band top and the hole effective masses. In addition, we calculated the corresponding optical properties of the spinel structure CdCr_2S_4. These should be useful to deeply understand spinel CdCr_2S_4 as a ferromagnetic semiconductor for possible semiconductor spintronic applications.

First principles study on electronic structure and optical properties of novel Na-hP4 high pressure phase

The electronic structure and optical properties of novel Na-hP4 high pressure phase at different pressures(260,320,400 and 600 GPa)were investigated by the density functional theory(DFT)with the generalized gradient approximation(GGA)for the exchange and correlation energy.The band structure along the higher symmetry axes in the Brillouin zone,the density of states(DOS) and the partial density of states(PDOS)were presented.The band gap increases and the energy band expands to some extent with the pressure increasing.The dielectric function,reflectivity,energy-loss function,optical absorption coefficient,optical conductivity, refractive index and extinction coefficient were calculated for discussing the optical properties of Na-hP4 high pressure phase at different pressures.

UV-Vis Spectrum and the Third-order Nonlinear Optical Properties of the Chiral Camphorderived β-diketonate Platinum Complexes

UV-Vis spectrum and the third-order nonlinear optical properties of the chiral camphor-derived β-diketonate have been studied at the B3LYP/6-31G＊ level. The results showed that the introduction of electron-drawing group -CF3 and -C3F7 on β-diketonate made the strongest absorption peak red-shift and the lowest energy absorption blue-shied. Introduction of -OC2H5 on the benzene or pyridine ring made the lowest energy absorption blue-shift. When the -C2H3 was introduced on the benzene or pyridine ring, the lowest energy absorption was red-shifted. Introduction of electron-donating group on β-diketonate can enlarge their nonlinear optical properties. On the contrary, the introduction of electron-drawing group dropped it down.

Effect of Pressure on Electronic Structures and Optical Properties of Rocksalt InN

The electronic structures and optical properties of rocksalt indium nitride （INN） under pressure were studied using the first-principles calculation by considering the exchange and correlation potentials with the generalized gradient approximation. The calculated lattice constant shows good agreement with the experimental value. It is interestingly found that the band gap energy Eg at the F or X point remarkably increases with increasing pressure, but Eg at the L point does not increase obviously. The pressure coefficient of Eg is calculated to be 44 meV/GPa at the F point. Moreover, the optical properties of rocksalt InN were calculated and discussed based on the calculated band structures and electronic density of states.

First-principles calculations for electronic and optical properties of the zinc-blende structured BeS compound under pressure

The electronic and the optical properties of the cubic zinc-blende （ZB） BeS under high pressure have been investigated by using ab initio plane-wave pseudopotential density functional theory method in the generalised gradient approximation （GGA） for exchange-correlation interaction. The electronic band structure and the pressure dependence of the total and partial densities of state under pressure are successfully described. Our calculations show that the ZB BeS has large and indirect band gaps associated with （F → X） transitions in ambient conditions. The results obtained are consistent with the experimental data available and other calculations. The optical properties, including dielectric function, energy-loss function, complex refractive index, reflection and absorption spectra, are investigated and analysed at different external pressures. The results suggest that the optical absorption appears moztly in the ultra-violet region and the curve of refractive index shift toward high energies （blue shift） with pressure increasing.

First-principles study of structural, electronic and optical properties of ZnF_2

The structural, electronic, and optical properties of rutile-, CaC12-, and PdF2-ZnF2 are calculated by the plane-wave pseudopotential method within the density functional theory. The calculated equilibrium lattice constants are in reasonable agreement with the available experimental and other calculated results. The band structures show that the rutile-, CaCl2-, and PdF2-ZnF2 are all direct band insulator. The band gaps are 3.63, 3.62, and 3.36 eV, respectively. The contribution of the different bands was analyzed by the density of states. The Mulliken population analysis is performed. A mixture of covalent and weak ionic chemical bonding exists in ZnF2. Furthermore, in order to understand the optical properties of ZnF2, the dielectric function, absorption coefficient, refractive index, electronic energy loss spectroscopy, and optical reflectivity are also performed in the energy range from 0 to 30 eV. It is found that the main absorption parts locate in the UV region for ZnF2. This is the first quantitative theoretical prediction of the electronic and optical properties of ZnF2 compound, and it still awaits experimental confirmation.

Electronic and optical properties of pure and Ce^(3+)-doped CaS single crystals:a first-principles prediction

This paper investigates the electronic and optical properties for pure and Ce^3＋-doped CaS crystals by using the first-principles total energy calculations. The results show that CaS：Ce has a direct band gap of 2.16 eV, and the top of the valence band is determined by S 3p states and the bottom of the conduction band is determined by Ce 4f states, respectively. Our results validate that the yellow emission from CaS：Ce is produced by doped cerium and the green emission quenches at 12.5% cerium concentration. The Ce-S bond shows more covalent character than the Ca-S bond.

Electronic and optical properties of the zinc-blende structured LiZnN under pressure

The electronic and optical properties of the cubic zinc-blende （ZB） structured filled tetrahedral semiconductor α-LiZnN under pressure are investigated by using ab initio plane wave pseudopotential density functional theory method within the generalized gradient approximation （GGA）.The electronic band structure and the density of state under pressure are systematically described.The basic optical constants,including the reflection and absorption spectra,the energy-loss function,the complex refractive index and the dielectric function,are calculated and analysed at different external pressures.Our results suggested that the ZB α-LiZnN is transparent in the partially ultra-violet to the visible light region,and it seems that the transparency is hardly affected by the pressure.

Theoretical investigation of structural and optical properties of semi-fluorinated bilayer graphene

We have studied the structural and optical properties of semi-fluorinated bilayer graphene using density functional theory. When the interlayer distance is 1.62A, the two graphene layers in AA stacking can form strong chemical bonds. Under an in-plane stress of 6.8 GPa, this semi-fluorinated bilayer graphene becomes the energy minimum. Our calculations indicate that the semi-fluorinated bilayer graphene with the AA stacking sequence and rectangular fluorinated configuration is a nonmagnetic semiconductor （direct gap of 3.46 eV）. The electronic behavior at the vicinity of the Fermi level is mainly contributed by the p electrons of carbon atoms forming C=C double bonds. We compare the optical properties of the semi- fluorinated bilayer graphene with those of bilayer graphene stacked in the AA sequence and find that the semi-fluorinated bilayer graphene is anisotropic for the polarization vector on the basal plane of graphene and a red shift occurs in the [010] polarization, which makes the peak at the low-frequency region located within visible light. This investigation is useful to design polarization-dependence optoelectronic devices.

First-principles study of electronic and optical properties in wurtzite Zn_(1-x)Cu_xO

We perform a first-principles simulation to study the electronic and optical properties of wurtzite Zn1-xCuxO. The simulations are based upon the Perdew-Burke-Ernzerhof form of generalised gradient approximation within the density functional theory. Calculations are carried out in different concentrations. With increasing Cu concentration, the band gap of Znl-xCuxO decreases due to the shift of valence band. The imaginary part of the dielectric function indicates that the optical transition between O2p states in the highest valence band and Zn 4s states in the lowest conduction band shifts to the low energy range as the Cu concentration increases. Besides, it is shown that the insertion of Cu atom leads to redshift of the optical absorption edge. Meanwhile, the optical constants of pure ZnO and Zn0.75Cu0.250, such as loss function, refractive index and reflectivity, are discussed.

First-principles study of structure and nonlinear optical properties of CdHg(SCN)_4 crystal

The geometric structure,electronic structure,and optical properties of CdHg（SCN）4 crystal are calculated by using the density functional perturbation theory and Green function screening Coulomb interaction approximation.The band gap of CdHg（SCN）4 crystal is calculated to be 3.198 eV,which is in good agreement with the experimental value 3.265 eV.The calculated second-order nonlinear optical coefficients are d14 = 1.2906 pm/V and d15 = 5.0928 pm/V,which are in agreement with the experimental results（d14=（1.4 ±0.6） pm/V and d15=（6.0 ±0.9） pm/V）.Moreover,it is found that the contribution to the valence band mainly comes from Cd-4d,Hg-5d states,and the contributions to the valence band top and the conduction band bottom predominantly come from C-2p,N-2p,and S-3p states.The second-order nonlinear optical effect of CdHg（SCN）_4 crystal results mainly from the internal electronic transition of（SCN）^-.