Investigation of optical reflectance from different animal vertebra along the fixation trajectory of pedicle screw in frequency domain

Accurate placement of pedicle screw(PS)is crucial in spinal surgery.Developing new real-time intra-operative monitoring and navigation methods is an important direction of clinical appli-cation research.In this paper,we studied the spectrum along the fixation trajectory of PS in frequency domain to tackle the accuracy problem.Fresh porcine vertebrae,bovine vertebrae and ovine vertebrae were measured with the near-infrared spectrum(NIR)device to obtain the reflected spectrum from the vertebrae.Along the fixation trajectory of PS,average energy from different groups was calculated and used for identifying different tissues and compared to achieve the optimal recognition factor.Compared with the time domain approach,the frequency domain method could divide the spectra measured at different tissue points into different groups more stably and accurately,which could serve as a new method to assist the PS insertion.The results gained from this study are significant to the development of hi-tech medical instruments with independent intellectual property rights.

OPTICAL MEA SUREMENTS OF RAT MUSCLE SAMPLES UND ER TREATMENT WITH ETHYLENE GLYCOL AND GLUCOSE

With the objective to study the variation of optical properties of rat muscle during optical clearing,we have performed a set of optical measurements from that kind of tissue.The.measurements performed were total tr ansmittance,ollimated transmit tance,specular reflec-tance and total reflectance.This set of measurements is suficient to determine diffuse reflectance and absorbance of the sample,also necessary to est imate the optical properties.All the per formed measurements and calculated quantities will be used later in inverse Monte Carlo(IMC)simu-lations to determine the evolution of the optical properties of muscle during treatments with ethylene glycol and glucose.The results obt ained with the measurements already provide some information about the optical c learing treatments applied to the muscle and translate the mechanisms of turning the tissue more transparent and sequence of regimes of optical clearing.

Structural and optical properties of Al_(1-x)In_xN epilayers on GaN template grown by metalorganic chemical vapor deposition

This paper reports that Al1-xInxN epilayers were grown on GaN template by metalorganic chemical vapor deposition with an In content of 7%--20%. X-ray diffraction results indicate that all these Al1-xInxN epilayers have a relatively low density of threading dislocations. Rutherford backscattering/channeling measurements provide the exact compositional information and show that a gradual variation in composition of the Al1-xInxN epilayer happens along the growth direction. The experimental results of optical reflection clearly show the bandgap energies of Al1-xInxN epilayers. A bowing parameter of 6.5~eV is obtained from the compositional dependence of the energy gap. The cathodoluminescence peak energy of the Al1-xInxN epilayer is much lower than its bandgap, indicating a relatively large Stokes shift in the Al1-xInxN sample.

Photon counts modulation in optical time domain reflectometry

The quantum fluctuation of photon counting limits the field application of optical time domain reflection. A method of photon counts modulation optics time domain reflection with single photon detection at 1.55 μm is presented. The influence of quantum fluctuation can be effectively controlled by demodulation technology since quantum fluctuation shows a uniform distribution in the frequency domain. Combined with the changing of the integration time of the lock-in amplifier, the signal to noise ratio is significantly enhanced. Accordingly the signal to noise improvement ratio reaches 31.7 dB compared with the direct photon counting measurement.

Optical Absorption Enhancement Effects of Silver Nanodisk Arrays in the Application of Silicon Solar Cell

Surface plasmon resonance of noble metal nanoparticles leads to the optical absorption enhancement effects,which have great potential applications in solar cell.By using the general numerical method of discrete dipole approximation （DDA）,we study the absorption and scattering properties of two-dimensional square silver nanodisks （2D SSN） arrays on the single crystal silicon solar cell.Based on the effective reflective index model of the single crystal silicon solar cell,we investigate the optical enhancement absorption of light energy by varying the light incident direction,particle size,aspect ratio,and interparticle spacing of the silver nanodisks.The peak values and position of the optical extinction spectra of the 2D square arrays of noble metal nanodisks are obtained with the different array structures.

Research progress of cholesteric liquid crystals with broadband reflection characteristics in application of intelligent optical modulation materials

Cholesteric liquid crystals（CLCs） have recently sparked an enormous amount of interest in the development of soft matter materials due to their unique ability to self-organize into a helical supra-molecular architecture and their excellent selective reflection of light based on the Bragg relationship.Nowadays,by the virtue of building the self-organized nanostructures with pitch gradient or non-uniform pitch distribution,extensive work has already been performed to obtain CLC films with a broad reflection band.Based on authors＇ many years＇ research experience,this critical review systematically summarizes the physical and optical background of the CLCs with broadband reflection characteristics,methods to obtain broadband reflection of CLCs,as well as the application in the field of intelligent optical modulation materials.Combined with the research status and the advantages in the field,the important basic and applied scientific problems in the research direction are also introduced.

10-Gb/s Transmission in WDM PON Employing Reflective Semiconductor Optical Amplifier and Fibre Bragg Grating Equaliser

We propose a 10-Gb/s Wavelength- Division-Multiplexed Passive Optical Network （WDM-PON） scheme with upstream transmi- ssion employing Reflective Semiconductor Op- tical Amplifier （RSOA） and Fibre Bragg Gra- ting （FBG） optical equaliser. Transmissions of 10-Gb/s non return-to-zero signals using a 1.2- GHz RSOA and FBG optical equaliser with different setups are demonstrated. Significant performance improvement and 40-kin standard single mode fibre transmission are achieved using FBG optical equaliser and Remotely Pum- ped Erbium-Doped Fibre Amplifier （RP-EDFA）, where they are used to equalise the output of the band-limited RSOA and amplify the seed light and upstream signal, respectively.

Caustics study of the effect of glass fibres on dynamic fracture of hardened cement paste

The reflected optical caustics method is applied to study dynamic fracture problems in hardened cement paste. First both the unreinforced cement paste and the glass fibres reinforced cement paste specimens were fabricated and the reflective coating on the surface of the specimen was prepared. Secondly the crack path and the shadow spot patterns during the crack propagation process for the two specimens were recorded by using a multi-spark high speed camera.Thirdly some dynamic parameters of two cement paste specimens including crack onset time the dynamic stress intensity factor and crack growth velocity were determined and analyzed comparatively.This indicates that the glass fibres can improve the fracture resistance and delay fracture time.These results will play an important role in evaluating the dynamic fracture properties of cement paste.

Suspended sediment concentration mapping based on the MODIS satellite imagery in the East China inland, estuarine, and coastal waters

The purpose of this research is to improve the retrieval accuracy for the suspended sediment concentration(SSC) from in situ and satellite remote sensing measurements in turbid East China estuarine and coastal waters. For this aim, three important tasks are formulated and solved: 1) an estimation of remote-sensing reflectance spectra R_(rs)(λ) after atmospheric correction; 2) an estimation of R_(rs)(λ) from the radiometric signals above the air-water surface; and 3) an estimation of SSC from R_(rs)(λ). Six different models for radiometric R_(rs)(λ) determination and 28 models for SSC versus R_(rs)(λ) are analyzed based on the field observations made in the Changjiang River estuary and its adjacent coastal area. The SSC images based on the above-mentioned analysis are generated for the area.

Review of reflective fiber optic sensors for surface topography measurement

Different from the traditional contact surface topography measurement,reflective intensity-modulated fiber optic sensor(RIM-FOS)has the unique advantages of non-contact nondestructive detection.This paper briefly introduces the principle and performance of RIM-FOS for surface topography measurement and compares with several other methods of topography measurement.Based on the review of its development process,this paper summarizes and analyses the hot issues of RIM-FOS in the surface topography measurement,then predicts the future trend for a guidance of the further study.

Terahertz Polarization Detector Based on PMMA Grating Pipe

In this paper,we propose and experimentally demonstrate a method to realize a polarization detector by using a commercially available polymethyl methacrylate（PMMA） pipe.An asymmetric polarization-related structure is fabricated by etching different grating structures on the external surface of the pipe.The results show that when the pipe rotates up to 90°,the peak of the transmission spectrum can evidently shift towards the low frequency,which means the pipe with grating structures can serve as a polarization detector.This design possesses the merits of a simple structure and easy fabrication.

Performance evaluation of operational atmospheric correction algorithms over the East China Seas

To acquire high-quality operational data products for Chinese in-orbit and scheduled ocean color sensors, the performances of two operational atmospheric correction(AC) algorithms(ESA MEGS 7.4.1 and NASA Sea DAS 6.1) were evaluated over the East China Seas(ECS) using MERIS data. The spectral remote sensing reflectance R_(rs)(λ), aerosol optical thickness(AOT), and ?ngstr?m exponent(α) retrieved using the two algorithms were validated using in situ measurements obtained between May 2002 and October 2009. Match-ups of R_(rs), AOT, and α between the in situ and MERIS data were obtained through strict exclusion criteria. Statistical analysis of R_(rs)(λ) showed a mean percentage difference(MPD) of 9%–13% in the 490–560 nm spectral range, and significant overestimation was observed at 413 nm(MPD>72%). The AOTs were overestimated(MPD>32%), and although the ESA algorithm outperformed the NASA algorithm in the blue-green bands, the situation was reversed in the red-near-infrared bands. The value of α was obviously underestimated by the ESA algorithm(MPD=41%) but not by the NASA algorithm(MPD=35%). To clarify why the NASA algorithm performed better in the retrieval of α, scatter plots of the α single scattering albedo(SSA) density were prepared. These α-SSA density scatter plots showed that the applicability of the aerosol models used by the NASA algorithm over the ECS is better than that used by the ESA algorithm, although neither aerosol model is suitable for the ECS region. The results of this study provide a reference to both data users and data agencies regarding the use of operational data products and the investigation into the improvement of current AC schemes over the ECS.

Infrared Emissivity of La0.8Sr0.2MnO3 with Three Different Structures

La_（0.8）Sr_（0.2）MnO_3 samples with rhombohedral, orthohombic and monoclinic structures were prepared by solid state reaction, sol-gel and co-precipitation methods, respectively. Lattice parameters, grain size, morphology, infrared absorption and emissivity of samples were investigated. The results indicated that the average crystallite size calculated from XRD result and particle size of orthohombic sample were smaller than those of the other two samples, and honeycomb shape grains were observed in orthohombic sample. Due to lower crystal symmetry, Mn-O stretching vibration peaks of the three samples shifted to higher infrared wavenumber. According to the theory of wave optics and Kirchhoff law, bigger rhombohedral sample showed higher emissivity than monoclinic one. However, due to the honeycomb structure of orthohombic sample, repeated reflection and scattering led to the increase of absorption, and orthohombic sample exhibited the highest emissivity.

Experimental investigation on pulse-contrast degradation caused by surface reflection in optical parametric chirped-pulse amplification

In this Letter, we experimentally explore the pulse-contrast degradation caused by surface reflection in optical parameter chirped-pulse amplification. Different pump-to-signal conversion efficiencies and post-pulses with different intensities are obtained by changing the seed-pulse or pump-pulse energy and inserting etalons with different reflection coefficients, respectively. The contrast measurements show that the generated first pre-pulse intensity is proportional to the product of the surface reflection intensity ratio and the square of the pump-to-signal conversion efficiency.

Optical filter based on internal reflection and optical rotatory dispersion of NaBrO_3 crystal

Based on the optical rotatory dispersion and zero reflection of the p-polarization light at the Brewster angle, a novel optical filter that employs only one NaBrO3 crystal and one polarizer are proposed and demonstrated. Performance of the optical filter is studied both theoretically and experimentally. Results show that the green light is becomes nearly extinct when the angles of the polarizer are set at 80°and 260°, whereas the red light becomes nearly extinct when the angles of the polarizer are set at 116°and 296°.Isolation of more than 8 dB can be achieved. The measured extinction ratios are 12.3 and 12.6 dB for green and red lights, respectively.

Atmospheric correction of HJ-1 A/B CCD over land： Land surface reflectance calculation for geographical information product

This paper proposed a method to retrieve the land surface reflectance from the HJ-1A/B CCD data. The aerosol optical depth（AOD）, the most important factor affecting the atmospheric correction of CCD images at all bands, is proposed to retrieve from the CCD imagery by the approach of dense dark vegetation（DDV） method. A look-up table in terms of the transmittances, the path radiances and the atmospheric spherical albedo as functions of the AOD was established for a variety of sun-sensor geometry and aerosol loadings. The atmospheric correction is then achieved with the look-up table and the MODIS surface reflectance output（MOD09） as the priori datasets. Based on the retrieved AOD and the look-up table of atmospheric correction coefficients, the land surface reflectance was retrieved for the HJ-1A/B data according to the atmospheric radiative transfer equation. Some in-situ measurement Data for Yanzhou of Shandong province in East China and MODIS land surface reflectance products MOD09 are used to preliminarily validate the proposed method. The results show that the proposed method can remove effectively the atmospheric contributions, and the overall accuracy of the retrieval land surface reflectance can be improved substantially.

Phase-sensitive reflection of squeezed vacuum field in optical cavity

We experimentally investigate the optical cavity tor various coupled regimes wltn an mjectea squeezeo vacuum state. We measure the quantum fluctuation spectra of the reflected field of an optical cavity using the homodyne detection and present the spectral dependence on the absorption and dispersion properties of the cavity in the under-coupled, critically-coupled, and over-coupled regimes. The spectra lineshape is phase sensitive with the phase shift induced by the cavity. Moreover, we find that the over-coupled optical cavity has obvious advantage in the manipulation of quantum fluctuation.

Innovative Analysis Ready Data(ARD)product and process requirements,software system design,algorithms and implementation at the midstream as necessary-but-notsuffcient precondition of the downstream in a new notion of Space Economy 4.0-Part 1:Problem background in Artificial General Intelligence(AGI)

Aiming at the convergence between Earth observation(EO)Big Data and Artificial General Intelligence(AGI),this two-part paper identifies an innovative,but realistic EO optical sensory imagederived semantics-enriched Analysis Ready Data(ARD)productpair and process gold standard as linchpin for success of a new notion of Space Economy 4.0.To be implemented in operational mode at the space segment and/or midstream segment by both public and private EO big data providers,it is regarded as necessarybut-not-sufficient“horizontal”(enabling)precondition for:(I)Transforming existing EO big raster-based data cubes at the midstream segment,typically affected by the so-called data-rich information-poor syndrome,into a new generation of semanticsenabled EO big raster-based numerical data and vector-based categorical(symbolic,semi-symbolic or subsymbolic)information cube management systems,eligible for semantic content-based image retrieval and semantics-enabled information/knowledge discovery.(II)Boosting the downstream segment in the development of an ever-increasing ensemble of“vertical”(deep and narrow,user-specific and domain-dependent)value–adding information products and services,suitable for a potentially huge worldwide market of institutional and private end-users of space technology.For the sake of readability,this paper consists of two parts.In the present Part 1,first,background notions in the remote sensing metascience domain are critically revised for harmonization across the multidisciplinary domain of cognitive science.In short,keyword“information”is disambiguated into the two complementary notions of quantitative/unequivocal information-as-thing and qualitative/equivocal/inherently ill-posed information-as-data-interpretation.Moreover,buzzword“artificial intelligence”is disambiguated into the two better-constrained notions of Artificial Narrow Intelligence as part-without-inheritance-of AGI.Second,based on a betterdefined and better-understood vocabulary of multidisciplinary terms,existing EO optical sensory image-derived Level 2/ARD products and processes are investigated at the Marr five levels of understanding of an information processing system.To overcome their drawbacks,an innovative,but realistic EO optical sensory image-derived semantics-enriched ARD product-pair and process gold standard is proposed in the subsequent Part 2.

Innovative Analysis Ready Data(ARD)product and process requirements,software system design,algorithms and implementation at the midstream as necessary-but-notsufficient precondition of the downstream in a new notion of Space Economy 4.0-Part 2:Software developments

Aiming at the convergence between Earth observation(EO)Big Data and Artificial General Intelligence(AGI),this paper consists of two parts.In the previous Part 1,existing EO optical sensory imagederived Level 2/Analysis Ready Data(ARD)products and processes are critically compared,to overcome their lack of harmonization/standardization/interoperability and suitability in a new notion of Space Economy 4.0.In the present Part 2,original contributions comprise,at the Marr five levels of system understanding:(1)an innovative,but realistic EO optical sensory image-derived semantics-enriched ARD co-product pair requirements specification.First,in the pursuit of third-level semantic/ontological interoperability,a novel ARD symbolic(categorical and semantic)co-product,known as Scene Classification Map(SCM),adopts an augmented Cloud versus Not-Cloud taxonomy,whose Not-Cloud class legend complies with the standard fully-nested Land Cover Classification System’s Dichotomous Phase taxonomy proposed by the United Nations Food and Agriculture Organization.Second,a novel ARD subsymbolic numerical co-product,specifically,a panchromatic or multispectral EO image whose dimensionless digital numbers are radiometrically calibrated into a physical unit of radiometric measure,ranging from top-of-atmosphere reflectance to surface reflectance and surface albedo values,in a five-stage radiometric correction sequence.(2)An original ARD process requirements specification.(3)An innovative ARD processing system design(architecture),where stepwise SCM generation and stepwise SCM-conditional EO optical image radiometric correction are alternated in sequence.(4)An original modular hierarchical hybrid(combined deductive and inductive)computer vision subsystem design,provided with feedback loops,where software solutions at the Marr two shallowest levels of system understanding,specifically,algorithm and implementation,are selected from the scientific literature,to benefit from their technology readiness level as proof of feasibility,required in addition to proven suitability.To be implemented in operational mode at the space segment and/or midstream segment by both public and private EO big data providers,the proposed EO optical sensory image-derived semantics-enriched ARD product-pair and process reference standard is highlighted as linchpin for success of a new notion of Space Economy 4.0.

LS-SVM-based surface roughness prediction model for a reflective fiber optic sensor

Reflective fiber optic sensors have advantages for surface roughness measurements of some special workpieces,but their measuring precision and efficiency need to be improved further. A least-squares support vector machine（LS-SVM）-based surface roughness prediction model is proposed to estimate the surface roughness, Ra, and the coupled simulated annealing（CSA） and standard simplex（SS） methods are combined for the parameter optimization of the mode. Experiments are conducted to test the performance of the proposed model, and the results show that the range of average relative errors is-4.232%–2.5709%. In comparison with the existing models, the LS-SVM-based model has the best performance in prediction precision, stability, and timesaving.