Coupling model for an extended-range plasmonic optical transformer scanning probe

The expansion of nanoscale optics has generated a variety of scanning probe geometries that yield spatial resolution below 10 nm.In this work,we present a physical model for coupling far-field radiation to plasmonic modes on the surface of a scanning probe,and propose a scheme for extending the working distance of such a probe.In a subsurface application,an optical transformer at the tip of a probe can be coupled to a remote near-field antenna placed inside the sample at a distance away from the surface,expanding the effective working distance up to 100 nm.

Design and applicability analysis of independent double acquisition circuit of all-fiber optical current transformer

The advantages of the all-fiber optical current transformer include but are not limited to being small in size,having no magnetic saturation,exhibiting high measurement accuracy,and boasting strong electromagnetic interference resistance.However,the high cost of the all-fiber optical transformer limits its promotion and application in engineering.This paper proposes a design scheme of an independent double acquisition loop for the all-fiber optical current transformer based on the single optical path.Firstly,based on the closed-loop control mode and open-loop control mode,the twochannel sampling signal demand for relay protection,and the independent dual-acquisition loop design scheme of the all-fiber optical current transformer are proposed.Secondly,the reliability and economic feasibility of the scheme are demonstrated by an analysis of system failure and cost.The results show that the scheme can actualize the acquisition function of two independent all-fiber optical current transformer products on a single all-fiber current transformer in an integrated manner,which greatly reduces the cost of the all-fiber optical current transformer in engineering applications.

New decomposition of the Fresnel operator corresponding to the optical transformation in ABCD-systems

By virtue of the coherent state representation of the newly introduced Fresnel operator and its group product property we obtain new decomposition of the Fresnel operator as the product of the quadratic phase operator, the squeezing operator, and the fractional Fourier transformation operator, which in turn sheds light on the matrix optics design of ABCD-systems The new decomposition for the two-mode Fresnel operator is also obtained by the use of entangled state representation.

Multiwavelength high-order optical vortex detection and demultiplexing coding using a metasurface

.Orbital angular momentum(OAM)of an optical vortex has attracted great interest from the scientific community due to its significant values in high-capacity optical communications such as mode or wavelength division multiplexer/demultiplexer.Although several configurations have been developed to demultiplex an optical vortex,the multiwavelength high-order optical vortex(HOOV)demultiplexer remains elusive due to lack of effective control technologies.In this study,we present the design,fabrication,and test of metasurface optical elements for multiwavelength HOOV demultiplexing based on optical gyrator transformation transformations in the visible light range.Its realization in a metasurface form enables the combined measurement of OAM,the radial index p,and wavelength using a single optical component.Each wavelength channel HOOV can be independently converted to a high-order Hermitian–Gaussian beam mode,and each of the OAM beams is demultiplexed at the converter output.Furthermore,we extend the scheme to realize encoding of the three-digit gray code by controlling the wavelength or polarization state.Experimental results obtained at three wavelengths in the visible band exhibit good agreement with the numerical modeling.With the merits of ultracompact device size,simple optical configuration,and HOOV recognition ability,our approach may provide great potential applications in photonic integrated devices and systems for high-capacity and demultiplex-channel OAM communication.

Manipulating surface plasmon waves by transformation optics:Design examples of a beam squeezer,bend,and omnidirectional absorber

We present several design examples of how to apply transformation optics and curved space under coordinate transformation to manipulating the surface plasmon waves in a controlled manner.We demonstrate in detail the design procedure of the plasmonic wave squeezer,in-plane bend and omnidirectional absorber.We show that the approximation method of modifying only the dielectric material of a dielectric-metal surface of the plasmonic device could lead to acceptable performance,which facilitates the fabrication of the device.The functionality of the proposed plasmonic device is verified using three-dimensional full-wave electromagnetic simulations.Aiming at practical realization,we also show the design of a plasmonic in-plane bend and omnidirectional absorber by an alternative transformation scheme,which results in a simple device structure with a tapered isotropic dielectric cladding layer on the top of the metal surface that can be fabricated with existing nanotechnology.

Design method of reusable reciprocal invisibility and phantom device

Reusable reciprocal invisibility and phantom device is proposed and designed based on multi-folded transformation optics and equivalent components. In comparison with the reported reciprocal invisibility cloaks, the material parameters of the device presented here are homogeneous, and the hiding of the target object does not require any “anti-object” at all,which dramatically breaks through the limitations of the “anti-object” design in previous reciprocal cloak design. Perfectly illusion effect is also found by reasonably setting the material parameters of the restored medium of the device, which can be used to confuse detection radars while hiding target objects. Last but not least, the proposed device has an open structure,which enables the target object enclosed by the device to perform material exchange and simplex transfer of information with the outside world through open channels. In other words, the proposed device has a reusable function, enabling stealth or phantom of new target objects without changing any parameters of the device.

Homogeneous transparent device and its layered realization

Arbitrarily shaped electromagnetic transparent devices with homogeneous, non-negative, anisotropic and generic constitutive parameters are proposed based on linear transformation optics, which provides the flexibility for device design that is applicable for the practical fabrication. To remove the anisotropic property, a layered structure is developed based on effective medium theory. Simulation results show that with sufficient layers, the performance of the layered transparent device is nearly as perfect as an ideal device, and it is able to protect an antenna without sacrificing its performance. The feasibility of designing a transparent device by using natural isotropic materials instead of metamaterials would dramatically reduce the difficulty of fabrication and further promote the practicality of the device.

Transformation optics for efficient calculation of transmembrane voltage induced on cells

We present a novel efficient approach in calculating induced transmembrane voltage（ITV） on cells based on transformation optics. As cell membrane is much thinner than the dimension of a typical cell, discretizing the membrane needs numerous meshes. Using an anisotropic medium based on transformation optics, the thickness of the membrane can be exaggerated by at least one order, which eliminates rigorous mesh refinement and reduces unknowns greatly. The accuracy and efficiency of the proposed method are verified by a cylindrical cell model. Moreover, the influence on ITV with bound water（BW） layers is also studied. The results show that when cells are exposed to nanosecond electric field, BW layers should be rigorously considered in calculating ITV.

Unitary transformation of general nonoverlapping-image multimode interference couplers with any input and output ports

An explanation of optical unitary transformation is presented for general nonoverlapping-image multimode interference(MMI)couplers with any number of input and output ports.The light transformation in the MMI coupler can be considered as an optical field matrix acting on an input light column vector.We investigate the general phase principle of output light image.The complete proof of nonoverlapping-image MMI coupler’s optical unitarity along with the phase analysis of matrix element is provided.Based on a two-dimensional finite-difference time-domain(2 D-FDTD)simulation,the unitary transformation is obtained for a 4×4 nonoverlapping-image MMI coupler within a deviation of 4×10-2 for orthogonal invariance and 8×10-2 for transvection invariance in the C-band spectral range.A compact 1×4 splitter based on cascaded MMI coupler is proposed,showing a phase deviation less than 5.4°while maintaining a low-loss performance in C-band spectra.

Multi-window invisible cloaks

This paper reports that a general method of designing invisible cloaks is using variant constitutive material parameters to realize the space transformation. A hollow region can be hidden after this transformation. It was recently shown （Ma H, Qu S B, Xu Z and Wang J F 2009 Appl. Phys. Lett. 94 103501） that when the original point moves to the boundary of a cloak, the cloak can be designed to be open. Based on this theory, we propose multi-window invisible cloaks which can conceal a group of objects. Full wave simulations for invisible cloaks with regular and irregular shapes verified this method.

Reflectionless spatial beam benders with arbitrary bending angle by introducing optic-null medium into transformation optics

By introducing an optic-null medium into the finite embedded transformation,a reflectionless spatial beam bender is designed,which can steer the output beam by a fixed pre-designed angleβfor an arbitrary incident angle.The bending angleβof the beam bender is determined by the geometrical angle of the device,which can be changed by simply choosing different geometrical angles.For various bending angles,the designed spatial beam bender can be realized by the same materials(i.e.,an optic-null medium),which is a homogenous anisotropic material.Numerical simulations verify the reflectionless bending effect and rotated imaging ability of the proposed beam bender.A reduction model of the optic-null medium is studied,which can also be used for a reflectionless spatial beam bender with a pre-designed bending angle.

Near-field multiple super-resolution imaging from Mikaelian lens to generalized Maxwell's fish-eye lens

Super-resolution imaging is vital for optical applications, such as high capacity information transmission, real-time bio-molecular imaging, and nanolithography. In recent years, technologies and methods of super-resolution imaging have attracted much attention. Different kinds of novel lenses, from the superlens to the super-oscillatory lens, have been designed and fabricated to break through the diffraction limit. However, the effect of the super-resolution imaging in these lenses is not satisfactory due to intrinsic loss, aberration, large sidebands, and so on. Moreover, these lenses also cannot realize multiple super-resolution imaging. In this research, we introduce the solid immersion mechanism to Mikaelian lens(ML) for multiple super-resolution imaging. The effect is robust and valid for broadband frequencies. Based on conformal transformation optics as a bridge linking the solid immersion ML and generalized Maxwell's fish-eye lens(GMFEL), we also discovered the effect of multiple super-resolution imaging in the solid immersion GMFEL.

Design of two-dimensional elliptically cylindrical invisible cloaks with multiple regions

Two-dimensional （2D） elliptically cylindrical invisible cloaks with multiple regions are designed based on the trans-formation optics and the complementary media theory. Multiple invisible cloak regions can be obtained by properly using the compressed or folded transformation in each space layer. The constitutive parameter tensor expressions for each re- gion have been obtained. The results of full wave simulations by using finite element software confirm the validity of the constitutive parameter tensor expressions. In addition, the parameters are relatively easier to realize.

Optimization of loss and gain multilayers for reducing the scattering of a perfect conducting cylinder

Reduction of electromagnetic scattering from a conducting cylinder could be achieved by covering it with optimized multilayers of normal dielectric and plasmonic material. The plasmonic material with intrinsic losses could degrade the cloaking effect. Using a genetic algorithm, we present the optimized design of loss and gain multilayers for reduction of the scattering from a perfect conducting cylinder. This multilayered structure is theoretically and numerically analyzed when the plasmonic material with low loss and high loss respectively is considered. We demonstrate by full-wave simulation that the optimized nonmagnetic gain-loss design can greatly compensate the decreased cloaking effect caused by loss material,which facilitates the realization of practical electromagnetic cloaking, especially in the optical range.

Experimental determination of Hurst exponent of the self-affine fractal patterns with optical fractional Fourier transform

By means of experimental technique of optical fractional Fourier transform, we have determined the Hurst exponent of a regular self-affine fractal pattern to demonstrate the feasibility of this approach. Then we extend this method to determine the Hurst exponents of some irregular self-affine fractal patterns. Experimental results show that optical fractional Fourier transform is a practical method for analyzing the self-affine fractal patterns.

Novel Fiber Optic Current Transformer With New Phase Modulation Method

Based on the transverse electro-optic effect of lithium niobate crystal,combined with polarizers and Faraday rotator,this paper presents a collinear closed-loop fiber optic current transformer with spatial non-reciprocity modulation method,and the feasibility of the scheme is verified by both the theoretical and experimental evidences.The detection scheme avoids the limitation of the transition time of the sensing fiber coil on the phase modulation frequency,improves the sensitivity and stability of the system,and reduces the volume and cost of fiber optic current transformer.The sawtooth wave modulation scheme is adopted to realize phase bias modulation and feedback modulation through phase shift of sawtooth wave to achieve closed-loop detection effect,which enhances the signal to noise ratio and simplifies demodulation mode.The experimental results show that the current ratio errors measured at room temperature range from 1%to 120%of rated current meet the requirements of national standard GB/T 20840.8-2007 and reach the accuracy level of 0.2S.The temperature stability of the current transformer is also tested,and the ratio error measured at the rated current does not exceed±0.2%in the range of-30℃to 50℃.

Simultaneously realizing thermal and electromagnetic cloaking by multi-physical null medium

Simultaneously manipulating multiple physical fields plays an important role in the increasingly complex integrated systems,aerospace equipment,biochemical productions,etc.For on-chip systems with high integration level,the precise and efficient control of the propagation of electromagnetic waves and heat fluxes simultaneously is particularly important.In this study,we propose a graphical designing method(i.e.,thermal-electromagnetic surface transformation)based on thermal-electromagnetic null medium to simultaneously control the propagation of electromagnetic waves and thermal fields according to the pre-designed paths.A thermal-electromagnetic cloak,which can create a cloaking effect on both electromagnetic waves and thermal fields simultaneously,is designed by thermal-electromagnetic surface transformation and verified by both numerical simulations and experimental measurements.The thermal-electromagnetic surface transformation proposed in this study provides a new methodology for simultaneous controlling on electromagnetic and temperature fields,and may have significant applications in improving thermal-electromagnetic compatibility problem,protecting of thermal-electromagnetic sensitive components,and improving efficiency of energy usage for complex onchip systems.

Fabricating lifted Haar transform image compression optical chip based on femtosecond laser

In this paper,a lifted Haar transform(LHT)image compression optical chip has been researched to achieve rapid image compression.The chip comprises 32 same image compression optical circuits,and each circuit contains a 2×2 multimode interference(MMI)coupler and aπ/2 delay line phase shifter as the key components.The chip uses highly borosilicate glass as the substrate,Su8 negative photoresist as the core layer,and air as the cladding layer.Its horizontal and longitudinal dimensions are 8011μm×10000μm.Simulation results present that the designed optical circuit has a coupling ratio(CR)of 0:100 and an insertion loss(IL)of 0.001548 d B.Then the chip is fabricated by femtosecond laser and testing results illustrate that the chip has a CR of 6:94 and an IL of 0.518 d B.So,the prepared chip possesses good image compression performance.

Curved anisotropic polaritons

The curved surface has emerged as new research platform for understanding and manipulating novel electromagnetic behaviors in complex media. In this paper, we explore the anisotropic polaritons on the spherical surface based on Maxwell’s fish-eye metric through stereographic projection. Additionally, this phenomenon can be extended to spindle surface by conformal mapping. Our calculations and simulations demonstrate the elliptic and hyperbolic polaritons, excited by an electric dipole on the sphere, will self-focus or focus on the poles on the sphere affected by anisotropic permittivity. Furthermore, we reveal the optical singularity nature of the curved hyperbolic polaritons from the perspective of transformation optics by obtaining the equivalent optical refractive index profiles and the particle potential energy. Based on natural anisotropic materials and metamaterials, the curved polaritons have potential applications in curved surface focusing and chaos regulation. This work not only bridges the transformation optics and anisotropic polaritons at curved surface, but also provides a new route to surface optical field manipulation.

Conformal optical black hole for cavity

Whispering-gallery-mode(WGM)cavity is important for exploring physics of strong light-matter interaction.Yet it suffers from the notorious radiation loss universally due to the light tunneling effect through the curved boundary.In this work,we propose and demonstrate an optical black hole(OBH)cavity based on transformation optics.The radiation loss of all WGMs in the ideal OBH cavity is completely inhibited by an infinite wide potential barrier.Besides,the WGM field in the OBH cladding is revealed to follow 1/r decay rule based on conformal mapping,which is fundamentally different from the conventional Hankel-function distributions in a homogeneous cavity.Experimentally,a truncated OBH cavity is achieved based on the effective medium theory,and both the Q-factor enhancement and tightly confined WGM fields are measured in the microwave spectra which agree well with the theoretical results.The circular OBH cavity is further applied to the arbitrary-shaped cavities including single-core and multi-core structures with high-Q factor via the conformal mapping.The OBH cavity design strategy can be generalized to resonant modes of various wave systems,such as acoustic and elastic waves,and finds applications in energy harvesting and optoelectronics.