On the Optimal Modes of Controlled Transfer of Walking Propulsion Devices

The problem of walking machine leg transfer is considered.Optimal laws of transfer are determined with regard to geometrical features ofgroundand underwater.Complex optimality criterion is introduced as the sum of indexes of quality of the movement multiplied each by weight coefficients.The solution is provided based on the walking machine“Ortonog.”

Optimal mode of capillary electrophoresis for the impurity analysis of β-lactam antibiotics

In order to determine the optimal mode of capillary electrophoresis for the impurity control of β-lactam antibiotics, different modes and various electrophoresis conditions for the separation of impurities were compared.The results showed that micellar electrokinetic capillary chromatography（MEKC） was the optimal separation mode for the impurity profiling of β-lactam antibiotics.In MEKC,not only the common R and S isomers,Δ-2 andΔ-3 isomers,and Z and E isomers,but also the impurities of β-lactam antibiotics could be well separated compared with the capillary zone electrophoresis.Therefore,MECK is the first choice for the separation of impurities of β-lactam antibiotics with capillary electrophoresis（CE）.The optimal separation could be achieved in MEKC by optimizing the pH and the concentrations of buffered saline,micelles and organic solvent（methanol） in running buffer.

Therapeutic effect of a dualchamber pacemaker with the optimized program-control mode on long-qt syndrome

Objectives To explore the optimized program-control mode of a dual-chamber pacemaker combined withβ-blocker to treat congenital long QT syndrome(LQTS). Methods 12 LQTS patients in our hospital that still have symptoms despite use of regular drug therapies or that can not endure the therapies were implanted with DDD cardiac pacemaker.The QT/QTc intervals of those patients were measured at different pacing rates respectively.Their cardiac pacemakers were all programmed to selectively turn on and turn off some related functions at the pacing rate of 80 beats/min.The dosage ofβ-blockers was adjusted according to the patients’ PR intervals and blood pressures.The MACE and the cardiac function of the patients were recorded after operation.Results The measured QT / QTc interval decreased with the pacing rate increasing.The pacing rate of 80 beats/min can make QT/QTc interval basically normal. The MACE of the patients were statistically declined(P = 0.003) and no negative effect on cardiac function was found during the follow-up.Conclusions The optimized program-control mode of a dual-chamber pacemaker combined withβ-blocker to treat congenital LQTS are:to pace at the rate of 80 beats/min and program to turn off lag,sleep,automatic preventing PMT and automatic threshold-capture feature and turn on the PVC,rate adaptation and atrioventricular node priority function.

Three-dimensional physical simulation and optimization of water injection of a multi-well fractured-vuggy unit

With complex fractured-vuggy heterogeneous structures, water has to be injected to facilitate oil pro- duction. However, the effect of different water injection modes on oil recovery varies. The limitation of existing numerical simulation methods in representing fractured- vuggy carbonate reservoirs makes numerical simulation difficult to characterize the fluid flow in these reservoirs. In this paper, based on a geological example unit in the Tahe Oilfield, a three-dimensional physical model was designed and constructed to simulate fluid flow in a fractured-vuggy reservoir according to similarity criteria. The model was validated by simulating a bottom water drive reservoir, and then subsequent water injection modes were optimized. These were continuous （constant rate）, intermittent, and pulsed injection of water. Experimental results reveal that due to the unbalanced formation pressure caused by pulsed water injection, the swept volume was expanded and consequently the highest oil recovery increment was achieved. Similar to continuous water injection, intermit- tent injection was influenced by factors including the connectivity of the fractured-vuggy reservoir, well depth, and the injection-production relationship, which led to a relative low oil recovery. This study may provide a constructive guide to field production and for the devel- opment of the commercial numerical models specialized for fractured-vuggy carbonate reservoirs.

Optimization Algorithms for Fully Automatic Optimizing Cross-cut Saw

The optimization of boards by grades plays an important role in the production for cross cutting boards, and the outturn rate and utilization of boards are directly affected by the optimization results of boards by grades. At present, the OptiCut series fully automatic optimizing cross-cut saw（FAOCCS） from Germany Weinig Group occupies the main markets in the world, but no report about the relative theories on the optimization technology and its algorithms is available. There exist some disadvantages in woodworking machinery and equipment used for cross cutting boards in China, for example, low sawing precision, outturn rate of boards and productivity, and difficulty in making statistics on the sawing results. Three optimization modes are presented for the optimization algorithms for FAOCCS, namely, optimization of fixed length, optimization of finger-jointed lumber and mixed optimization. Mathematical models are then established for these three optimization modes, and the corresponding software for realizing the optimization is prepared. Finally, Synthetic evaluation on the established mathematical models is presented through three practical examples. The results of synthetic evaluation indicate that FAOCCS using the optimization modes may raise the outturn rate of boards approximately 8% and the productivity obviously, and allows accurate statistics on the cross cut products of boards. The mathematical models of above three optimization modes are useful for increasing the outturn rate and utilization ratio of boards.

The Dragon-shape Strategy of China＇s Regional Economic Development and Policy Analysis

According to this paper, the dragon-shape strategy is the optimized option of China＇s future strategy with respect to the geographic distribution of regional economy.

Signal pre-processing method and application design of edge nodes for distributed electromechanical system

A signal pre-processing method based on optimal variational mode decomposition(OVMD)is proposed to improve the efficiency and accuracy of local data filtering and analysis of edge nodes in distributed electromechanical systems.Firstly,the singular points of original signals are eliminated effectively by using the first-order difference method.Then the OVMD method is applied for signal modal decomposition.Furthermore,correlation analysis is conducted to determine the degree of correlation between each mode and the original signal,so as to accurately separate the real operating signal from noise signal.On the basis of theoretical analysis and simulation,an edge node pre-processing system for distributed electromechanical system is designed.Finally,by virtue of the signal-to-noise ratio(SNR)and root-mean-square error(RMSE)indicators,the signal pre-processing effect is evaluated.The experimental results show that the OVMD-based edge node pre-processing system can extract signals with different characteristics and improve the SNR of reconstructed signals.Due to its high fidelity and reliability,this system can also provide data quality assurance for subsequent system health monitoring and fault diagnosis.

Research on optimized GA-SVM vehicle speed prediction model based on driver-vehicle-road-traffic system

The accurate prediction of vehicle speed plays an important role in vehicle's real-time energy management and online optimization control. However, the current forecast methods are mostly based on traffic conditions to predict the speed, while ignoring the impact of the driver-vehicle-road system on the actual speed profile. In this paper, the correlation of velocity and its effect factors under various driving conditions were firstly analyzed based on driver-vehicle-road-traffic data records for a more accurate prediction model. With the modeling time and prediction time considered separately, the effectiveness and accuracy of several typical artificial-intelligence speed prediction algorithms were analyzed. The results show that the combination of niche immunegenetic algorithm-support vector machine(NIGA-SVM) prediction algorithm on the city roads with genetic algorithmsupport vector machine(GA-SVM) prediction algorithm on the suburb roads and on the freeway can sharply improve the accuracy and timeliness of vehicle speed forecasting. Afterwards, the optimized GA-SVM vehicle speed prediction model was established in accordance with the optimized GA-SVM prediction algorithm at different times. And the test results verified its validity and rationality of the prediction algorithm.

Optimized guided mode resonant structure as thermooptic sensor and liquid crystal tunable filter

Applicability of guided mode resonant structures to tunable optical filtering and sensing is demonstrated using nematic liquid crystals. As a sensor, a minimum refractive index detectivity of 10^-5 is demonstrated while as a tunable filter, tunability range of few tens of nanometers with 2-nm bandwidth is presented. The optimum design is achieved by maximizing the evanescent field region in the analyte which maximizes the overlap integral. The device can be operated in reflection or transmission modes at normal incidence. It can also be operated at a single wavelength by measuring the angular profile of the light beam.

Optimization method for star tracker orientation in the sun-pointing mode

The star tracker is an optical attitude sensor with extremely high accuracy, the structure of which is mainly composed of the baffle, the lens, the image detector, and the processing unit, and it has been widely used in satel- lites To realize attitude determination from the weak star captured by the image detector of the star tracker,

Monthly Monetary Planning for China via Applying Method of Constructing Objective Function

Many economic problems can be formulated as optimization problems. Econometricians have long devoted their efforts to construct the econometric equation systems, while the corresponding objective functions receive few attentions. In recent twenty years, some techniques to construct the objective functions with economic implications have been developed, which might have a potential in economic decision-making. In the paper we app1y the method of constructing objective function to design an optimization model for monthly monetary planning of China. The real monthly data from l991 to l999 are used to evaluate the monthly economic situation. Our empirical experiment shows that the model gives a good short-term forecasting.