Relative Efficiencies of Optimal Designs in Four Dimensions Constructed Using Balanced Incomplete Block Designs

Experimentally, the best design gives estimates of the desired effects and contrasts with maximum precision. Efficiency as a discriminating factor enables comparison of designs. The goal of Response Surface Methodology (RSM) is the determination of the best settings of the in-put variables for a maximum (or a minimum) response within a region of interest, R. This calls for fitting a model that adequately represents the mean response since such a model, is then used to locate the optimum. D-, A-, E- and T-Optimal designs of a rotatable design of degree two in four dimensions constructed using balanced incomplete block designs (BIBD) when the number of replications is less than three times the number of pairs of treatments occur together in the design and their relative efficiencies to general designs are presented. D-optimal design had 88 runs after replicating the factorial part twice and the axial part thrice with an optimal variance of 0.6965612 giving an efficiency of 97.7% while for A- and T-optimal designs they are formed with 112 runs each obtained by replicating the factorial part two times and axial part six times. Their optimal variances are 0.05798174 and 1.29828 respectively, with efficiency of 71.8% for A-optimal and 87.5% for T-optimal design. E-optimal design was found to be the most efficient design with an only 32 runs comprising only of the factorial part and with an optimal variance of 0.4182000, attaining an efficiency of approximately 1%. This study proposes the adoption of the E-optimal design in estimating the parameters of a rotatable second-order degree model constructed using BIBD for less costs and time saving.

Multi-response optimization of process parameters in friction stir welded AM20 magnesium alloy by Taguchi grey relational analysis

The purpose of this paper is to optimize the process parameter to get the better mechanical properties of friction stir welded AM20 magnesium alloy using Taguchi Grey relational analysis(GRA).The considered process parameters are welding speed,tool rotation speed,shoulder diameter and plunging depth.The experiments were carried out by using Taguchi's L18 factorial design of experiment.The processes parameters were optimized and ranked the parameters based on the GRA.The percentage influence of each process parameter on the weld quality was also quantified.A validation experimental run was conducted using optimal process condition,which was obtained from the analysis,to show the improvement in mechanical properties of the joint.This study also shows the feasibility of the GRA with Taguchi technique for improvement in welding quality of magnesium alloy.

Grey Relational Analysis Coupled with Principal Component Analysis Method For Optimization Design of Novel Crash Box Structure

Crashworthiness and lightweight optimization design of the crash box are studied in this paper. For the initial model, a physical test was performed to verify the model. Then, a parametric model using mesh morphing technology is used to optimize and decrease the maximum collision force (MCF) and increase specific energy absorption (SEA) while ensure mass is not increased. Because MCF and SEA are two conflicting objectives, grey relational analysis (GRA) and principal component analysis (PCA) are employed for design optimization of the crash box. Furthermore, multi-objective analysis can convert to a single objective using the grey relational grade (GRG) simultaneously, hence, the proposed method can obtain the optimal combination of design parameters for the crash box. It can be concluded that the proposed method decreases the MCF and weight to 16.7% and 29.4% respectively, while increasing SEA to 16.4%. Meanwhile, the proposed method in comparison to the conventional NSGA-Ⅱ method, reduces the time cost by 103%. Hence, the proposed method can be properly applied to the optimization of the crash box.

Continuity of Solution Mappings for Parametric Set Optimization Problems under Partial Order Relations

This paper mainly investigates the semicontinuity of solution mappings for set optimization problems under a partial order set relation instead of upper and lower set less order relations. To this end, we propose two types of monotonicity definition for the set-valued mapping introduced by two nonlinear scalarization functions which are presented by these partial order relations. Then, we give some sufficient conditions for the semicontinuity and closedness of solution mappings for parametric set optimization problems. The results presented in this paper are new and extend the main results given by some authors in the literature.

Optimization of Selecting Air Conditioning Cold/Heat Sources with Grey Relation Analysis

Selection of air conditioning（AC） cold/heat sources generally concerns about certain aspects and cannot reveal the whole profile of the problems. Grey relation analysis （GRA） is a data processing method to categorize the correlation extent of compared sequences and a certain reference sequence in a system with uncertain information. It is applied to evaluating and selecting AC cold/heat sources from four main aspects, which are technology, economy, reliability, and operation and management. Case study shows that the result for selecting AC cold/heat sources with the GRA method can be more reasonable and convincible. Thus it offers a new approach for designers in heating, ventilating and air conditioning field to compare and evaluate different AC cold/heat sou rces.

Comparison between 4D robust optimization methods for carbon-ion treatment planning

Intensity-modulated particle therapy(IMPT)with carbon ions is comparatively susceptible to various uncertainties caused by breathing motion,including range,setup,and target positioning uncertainties.To determine relative biological effectiveness-weighted dose(RWD)distributions that are resilient to these uncertainties,the reference phase-based four-dimensional(4D)robust optimization(RP-4DRO)and each phase-based 4D robust optimization(EP-4DRO)method in carbon-ion IMPT treatment planning were evaluated and compared.Based on RWD distributions,4DRO methods were compared with 4D conventional optimization using planning target volume(PTV)margins(PTV-based optimization)to assess the effectiveness of the robust optimization methods.Carbon-ion IMPT treatment planning was conducted in a cohort of five lung cancer patients.The results indicated that the EP-4DRO method provided better robustness(P=0.080)and improved plan quality(P=0.225)for the clinical target volume(CTV)in the individual respiratory phase when compared with the PTV-based optimization.Compared with the PTV-based optimization,the RP-4DRO method ensured the robustness(P=0.022)of the dose distributions in the reference breathing phase,albeit with a slight sacrifice of the target coverage(P=0.450).Both 4DRO methods successfully maintained the doses delivered to the organs at risk(OARs)below tolerable levels,which were lower than the doses in the PTV-based optimization(P<0.05).Furthermore,the RP-4DRO method exhibited significantly superior performance when compared with the EP-4DRO method in enhancing overall OAR sparing in either the individual respiratory phase or reference respiratory phase(P<0.05).In general,both 4DRO methods outperformed the PTV-based optimization in terms of OAR sparing and robustness.

Optimizing SUS 304 wire drawing process by grey relational analysis utilizing Taguchi method

In the stainless steel 304 （SUS 304） wire drawing process, optimizing the die life and wire tensile strength, which are the larger-the-better quality characteristics （QCH） types, is of main interest. Three control factors, involving reduction ratio, lubricant temperature, and drawing speed, were investigated utilizing L9（34） orthogonal array （OA）. The grey relational analysis was conducted for the normalized signal-to-noise （S/N） ratios. The ordinal value of the grey grade was then used to decide optimal factor levels. The anticipated improvements in die life and wire tensile strength were estimated 25.31 h and 22.50 kg/mm2, respectively. To decide the significant factor which had effect on each QCH and predict the average value of each QCH, analysis of variance （ANOVA） was performed for S/N ratio and QCH. Confirmation experiments were then conducted, where a good overlap was noticed between the predicted and confirnation intervals for each QCH. The Hotelling T2 and the sample generalized variance control charts were finally utilized in controlling and monitoring future production. In conclusion, the grey relational analysis utilizing Taguchi method is an effective approach for optimizing the die life and wire tensile strength for SUS wire drawing process. 2008 University of Science and Technology Beijing. All rights reserved.

Adaptive stochastic resonance method for weak signal detection based on particle swarm optimization

In order to solve the parameter adjustment problems of adaptive stochastic resonance system in the areas of weak signal detection,this article presents a new method to enhance the detection efficiency and availability in the system of two-dimensional Duffing based on particle swarm optimization.First,the influence of different parameters on the detection performance is analyzed respectively.The correlation between parameter adjustment and stochastic resonance effect is also discussed and converted to the problem of multi-parameter optimization.Second,the experiments including typical system and sea clutter data are conducted to verify the effect of the proposed method.Results show that the proposed method is highly effective to detect weak signal from chaotic background,and enhance the output SNR greatly.

Current–phase relations of a ring-trapped Bose–Einstein condensate with a weak link

The current–phase relations of a ring-trapped Bose–Einstein condensate interrupted by a rotating rectangular barrier are extensively investigated with an analytical solution. A current–phase diagram, single and multi-valued relation, is presented with a rescaled barrier height and width. Our results show that the finite size makes the current–phase relation deviate a little bit from the cosine form for the soliton solution in the limit of a vanishing barrier, and the periodic boundary condition selects only the plane wave solution in the case of high barrier. The reason for multi-valued current–phase relation is given by investigating the behavior of soliton solution.

Optimization in Transition between Two Dynamic Systems Governed by a Class of Weakly Singular Integro-Differential Equations

This study presents numerical methods for solving the minimum energies that satisfy typical optimal requirements in the transition between two dynamic systems where each system is governed by a different kind of weakly singular integro-differential equation. The class of weakly singular integro-differential equations originates from mathematical models in aeroelasticity. The proposed numerical methods are based on earlier reported approximation schemes for the equations of the first kind and the second kind. The main result of this study is the development of numerical techniques for determining the stability between two dynamic systems in the minimum energy sense.

Optimizing the Glass Fiber Cutting Process Using the Taguchi Methods and Grey Relational Analysis

This paper mainly describes a new approach to optimizing of the cutting glass fiber with multiple performance characteristics, based on reliability analysis, Taguchi and Grey methods. During the cutting process, the speed, the volume and the cutting load are optimized cutting parameters when the performance characteristics, which include Weibull modulus and blade wear, are taken into consideration. In this paper, optimization with multiple performance characteristics is found to be the highest cutting speed and the smallest cutting volume, and the medium cutting load. An analysis of the variance of the blade wear indicates that the cutting speed (47.21%), the cutting volume (14.62%) and the cutting load (12.20%) are the most significant parameters in the cutting process of glass fibers. In summary, the most optimal cutting parameter should be A3B1C2. The results of experiments have shown that the multiple performance characteristics of cutting glass fiber are improved effectively through this approach.

Anti-interference beam pattern design based on second-order cone programming optimization

When signal-to-interference ratio is low, the energy of strong interference leaked from the side lobe of beam pattern will infect the detection of weak target. Therefore, the beam pattern needs to be optimized. The existing Dolph-Chebyshev weighting method can get the lowest side lobe level under given main lobe width, but for the other non-uniform circular array and nonlinear array, the low side lobe pattern needs to be designed specially. The second order cone programming optimization （SOCP） algorithm proposed in the paper transforms the optimization of the beam pattern into a standard convex optimization problem. Thus there is a paradigm to follow for any array formation, which not only achieves the purpose of Dolph-Chebyshev weighting, but also solves the problem of the increased side lobe when the signal is at end fire direction The simulation proves that the SOCP algorithm can detect the weak target better than the conventional beam forming.

Signifying quantum uncertainty relations by optimal observable sets and the tightest uncertainty constants

Quantum uncertainty relations constrain the precision of measurements across multiple non-commuting quantum mechanical observables.Here,we introduce the concept of optimal observable sets and define the tightest uncertainty constants to accurately describe these measurement uncertainties.For any quantum state,we establish optimal sets of three observables for both product and summation forms of uncertainty relations,and analytically derive the corresponding tightest uncertainty constants.We demonstrate that the optimality of these sets remains consistent regardless of the uncertainty relation form.Furthermore,the existence of the tightest constants excludes the validity of standard real quantum mechanics,underscoring the essential role of complex numbers in this field.Additionally,our findings resolve the conjecture posed in[Phys.Rev.Lett.118,180402(2017)],offering novel insights and potential applications in understanding preparation uncertainties.

Design Optimization of Irregular Cellular Structure for Additive Manufacturing

Irregularcellular structurehas great potential to be considered in light-weight design field. However, the research on optimizing irregular cellular structures has not yet been reporteddue to the difficulties in their modeling technology. Based on the variable density topology opti- mization theory, an efficient method for optimizing the topology of irregular cellular structures fabricated through additive manufacturing processes is proposed. The pro- posed method utilizes tangent circles to automatically generate the main outline of irregular cellular structure. The topological layoutof each cellstructure is optimized using the relative density informationobtained from the proposed modified SIMP method. A mapping relationship between cell structure and relative densityelement is builtto determine the diameter of each cell structure. The results show that the irregular cellular structure can be optimized with the proposed method. The results of simulation and experimental test are similar for irregular cellular structure, which indicate that the maximum deformation value obtained using the modified Solid Isotropic Microstructures with Penalization （SIMP） approach is lower 5.4× 10-5 mm than that using the SIMP approach under the same under the same external load. The proposed research provides the instruction to design the other irregular cellular structure.

Analysis on decision-making model of plan evaluation based on grey relation projection and combination weight algorithm

In military service joint operations, when there are more operational forces, more multifarious materials are consumed, the support is more complex and fuzzy, the deployment of personnel is more rapid, and the support provided by wartime military material support powers can be more effective. When the principles,requirements, influencing factors and goals of military material support forces are deployed in wartime, an evaluation indicator system is established. Thus, a new combined empowerment method based on an analytic hierarchy process（AHP） is developed to calculate the subjective weights, and the rough entropy method is used to calculate the objective weights. Combination weights can be obtained by calculating the weight preference coefficient error, which is determined by combining the cooperative game method and the minimum deviation into objectives. This approach can determine the grey relation projection coefficient and synthesize the measure scheme superiority to finally optimize the deployment plan using the grey relation projection decision-making method. The results show that the method is feasible and effective;it can provide a more scientific and practical decision-making basis for the military material support power deployment in wartime.

Fuzzy Optimum Model of Semi-Structural Decision for Lectotype Optimization of Offshore Platforms

In the process of concept design of offshore platforms, it is necessary to select the best from feasible alternatives through comparison and filter. The criterion set, used to evaluate and select the satisfying alternative, consists of many qualitative and quantitative factors. Therefore, the selection is a problem of multicriteria and semi-structural decision-making. Different from traditional methods in semi-structural decision-making, a new framework and methodology is presented in this paper for evaluation of offshore platform alternatives, First, the criterion set is established for the evaluation of alternatives. Next, the approach is studied to construct the relative membership degree matrix, in which both qualitative and quantitative factors are consistent with the uniform calculating standard. And then a new weight-assessing method is developed for calculation of the weights based on the relative membership degree matrix. Finally, a multi-hierarchy fuzzy optimum model is adopted to select the satisfying offshore platform alternative. A case study shows that the new framework and methodology are scientific, reasonable and easy to use in practice.

Multi-objective Fuzzy Optimization Algorithm for Separation-Recycle System

Separation-recycle system is an important part in chemical process, and its optimization is a multiobjective problem. In this paper the process optimization procedure is proposed. The fuzzy optimization algorithm with the concept of relative importance degree (RID) is utilized to transfer multi-objective optimization (MO-O) model into a single-objective optimization (SO-O) framework. The treatment of process condensate in synthesisa mmonia plant is taken as example to illustrate the optimization procedure, and the satisfactory result demonstrates feasibility and effectiveness of the suggested method.

Application of grey relational analysis in sheet metal forming for multi-response quality characteristics

The theory of grey systems is a new technique for performing prediction, relational analysis and decision making in many areas. In this paper, the use of grey relational analysis for optimizing the square hole flanging process parameters with considerations of the multiple response (the average flanging height, regular flanging and maximum strain) is introduced. Various flanging parameters, such as the blank inner radius rb, blank inner width B0, are considered. An orthogonal array is used for the experimental design. Multiple response values are obtained using finite element analysis (FEA). Optimal process parameters are determined by the grey relational grade obtained from the grey relational analysis for multi-performance characteristics (flanging height, regular flanging and maximum strain). Analysis of variance (ANOVA) for the grey relational grade is implemented. The results showed good agreement with the experiment result. Grey relational analysis can be applied in multiple response optimi-zation designs.

Longitudinal type-line optimization of high-speed train for low aerodynamic noise

The basic head shape of high-speed train is determined by its longitudinal type-line(LTL),so it is crucial to optimize its aerodynamic performance.Based on the parametric modeling of LTL constructed by non-uniform relational B-spline(NURBS)and the fluctuation pressure obtained by large eddy simulation(LES),the Kriging surrogate model(KSM)of LTL was constructed for low aerodynamic noise,and the accuracy of the KSM was improved gradually by adding the sample point with maximum expected improvement(EI)and the optimal point from optimization.The optimal objective was searched with genetic algorithm(GA).The results show that the total fluctuation pressure level(FPL)of the optimal LTL can be 8.7 dB less than that of original one,and the shape optimization method is feasible for low aerodynamic noise design.

OPTIMALITY CONDITIONS AND DUALITY RESULTS FOR NONSMOOTH VECTOR OPTIMIZATION PROBLEMS WITH THE MULTIPLE INTERVAL-VALUED OBJECTIVE FUNCTION

In this paper, both Fritz John and Karush-Kuhn-Tucker necessary optimality conditions are established for a （weakly） LU-efficient solution in the considered nonsmooth multiobjective programming problem with the multiple interval-objective function. Further, the sufficient optimality conditions for a （weakly） LU-efficient solution and several duality results in Mond-Weir sense are proved under assumptions that the functions constituting the considered nondifferentiable multiobjective programming problem with the multiple interval- objective function are convex.