This paper discusses the two-block large-scale nonconvex optimization problem with general linear constraints.Based on the ideas of splitting and sequential quadratic optimization(SQO),a new feasible descent method fo...This paper discusses the two-block large-scale nonconvex optimization problem with general linear constraints.Based on the ideas of splitting and sequential quadratic optimization(SQO),a new feasible descent method for the discussed problem is proposed.First,we consider the problem of quadratic optimal(QO)approximation associated with the current feasible iteration point,and we split the QO into two small-scale QOs which can be solved in parallel.Second,a feasible descent direction for the problem is obtained and a new SQO-type method is proposed,namely,splitting feasible SQO(SF-SQO)method.Moreover,under suitable conditions,we analyse the global convergence,strong convergence and rate of superlinear convergence of the SF-SQO method.Finally,preliminary numerical experiments regarding the economic dispatch of a power system are carried out,and these show that the SF-SQO method is promising.展开更多
In this paper, a new derivative free trust region method is developed based on the conic interpolation model for the unconstrained optimization. The conic interpolation model is built by means of the quadratic model f...In this paper, a new derivative free trust region method is developed based on the conic interpolation model for the unconstrained optimization. The conic interpolation model is built by means of the quadratic model function, the collinear scaling formula, quadratic approximation and interpolation. All the parameters in this model are determined by objective function interpolation condition. A new derivative free method is developed based upon this model and the global convergence of this new method is proved without any information on gradient.展开更多
Previous studies about optimizing earthquake structural energy dissipation systems indicated that most existing techniques employ merely one or a few parameters as design variables in the optimization process,and ther...Previous studies about optimizing earthquake structural energy dissipation systems indicated that most existing techniques employ merely one or a few parameters as design variables in the optimization process,and thereby are only applicable only to simple,single,or multiple degree-of-freedom structures.The current approaches to optimization procedures take a specific damper with its properties and observe the effect of applying time history data to the building;however,there are many different dampers and isolators that can be used.Furthermore,there is a lack of studies regarding the optimum location for various viscous and wall dampers.The main aim of this study is hybridization of the particle swarm optimization(PSO) and gravitational search algorithm(GSA) to optimize the performance of earthquake energy dissipation systems(i.e.,damper devices) simultaneously with optimizing the characteristics of the structure.Four types of structural dampers device are considered in this study:(ⅰ) variable stiffness bracing(VSB) system,(ⅱ) rubber wall damper(RWD),(ⅲ) nonlinear conical spring bracing(NCSB) device,(iv) and multi-action stiffener(MAS) device.Since many parameters may affect the design of seismic resistant structures,this study proposes a hybrid of PSO and GSA to develop a hybrid,multi-objective optimization method to resolve the aforementioned problems.The characteristics of the above-mentioned damper devices as well as the section size for structural beams and columns are considered as variables for development of the PSO-GSA optimization algorithm to minimize structural seismic response in terms of nodal displacement(in three directions) as well as plastic hinge formation in structural members simultaneously with the weight of the structure.After that,the optimization algorithm is implemented to identify the best position of the damper device in the structural frame to have the maximum effect and minimize the seismic structure response.To examine the performance of the proposed PSO-GSA optimization method,it has been applied to a three-story reinforced structure equipped with a seismic damper device.The results revealed that the method successfully optimized the earthquake energy dissipation systems and reduced the effects of earthquakes on structures,which significantly increase the building’s stability and safety during seismic excitation.The analysis results showed a reduction in the seismic response of the structure regarding the formation of plastic hinges in structural members as well as the displacement of each story to approximately 99.63%,60.5%,79.13% and 57.42% for the VSB device,RWD,NCSB device,and MAS device,respectively.This shows that using the PSO-GSA optimization algorithm and optimized damper devices in the structure resulted in no structural damage due to earthquake vibration.展开更多
In this paper,a passive muzzle arc control device(PMACD)of the augmented railguns is studied.By discussing its performance at different numbers of extra rails,a parameter optimization model is proposed.Through the cal...In this paper,a passive muzzle arc control device(PMACD)of the augmented railguns is studied.By discussing its performance at different numbers of extra rails,a parameter optimization model is proposed.Through the calculation model,it is found that the PMACD works well in the simple railgun,which refers to the gun that there is only one pair of rails in the inner bore.The PMACD may decrease the simple railgun’s armature peak current and muzzle arc,but affect its muzzle velocity not much.However,in the augmented railguns it has different characteristics.If the parameters of the PMACD are not selected suitable.It may increase the armature peak current and muzzle arc,but greatly decrease the velocity.The reason for this problem is that the extra rails generate a strong magnetic field in front of the armature,which induces a large current to change the armature current.It is also found that when the resistance and inductance parameters of the PMACD satisfy with the optimization formula,the PMACD can also play a good role in arc suppression in the augmented railguns.Experiments of an augmented railgun with a stainless steel PMACD are carried out to verify this optimization method.Results show that the muzzle arc is obviously controlled.This work may provide a reference for the design of the muzzle arc control device.展开更多
A topology optimization method based on the solid isotropic material with penalization interpolation scheme is utilized for designing gradient coils for use in magnetic resonance microscopy. Unlike the popular stream ...A topology optimization method based on the solid isotropic material with penalization interpolation scheme is utilized for designing gradient coils for use in magnetic resonance microscopy. Unlike the popular stream function method, the proposed method has design variables that are the distribution of conductive material. A voltage-driven transverse gradient coil is proposed to be used as micro-scale magnetic resonance imaging(MRI) gradient coils, thus avoiding introducing a coil-winding pattern and simplifying the coil configuration. The proposed method avoids post-processing errors that occur when the continuous current density is approximated by discrete wires in the stream function approach. The feasibility and accuracy of the method are verified through designing the z-gradient and y-gradient coils on a cylindrical surface.Numerical design results show that the proposed method can provide a new coil layout in a compact design space.展开更多
In order to implement the optimal design of the indoor thermal comfort based on the numerical modeling method, the numerical calculation platform is combined seamlessly with the data-processing platform, and an intera...In order to implement the optimal design of the indoor thermal comfort based on the numerical modeling method, the numerical calculation platform is combined seamlessly with the data-processing platform, and an interactive numerical calculation platform which includes the functions of numerical simulation and optimization is established. The artificial neural network (ANN) and the greedy strategy are introduced into the hill-climbing pattern heuristic search process, and the optimizing search direction can be predicted by using small samples; when searching along the direction using the greedy strategy, the optimal values can be quickly approached. Therefore, excessive external calling of the numerical modeling process can be avoided, and the optimization time is decreased obviously. The experimental results indicate that the satisfied output parameters of air conditioning can be quickly given out based on the interactive numerical calculation platform and the improved search method, and the optimization for indoor thermal comfort can be completed.展开更多
During the construction process of the construction project,the construction technology management work can improve the overall quality of the project construction.In the context of increasingly fierce competition in ...During the construction process of the construction project,the construction technology management work can improve the overall quality of the project construction.In the context of increasingly fierce competition in the construction market,construction enterprises should strengthen the management of construction technology,enhance their technical level and market competitiveness,and promote the development of the construction market[1].The paper mainly analyzes the optimization methods of build-Keywords:ing construction technology management.展开更多
Based on an Alopex optimization algorithm and a response surface model(RSM),a hybrid sub-region methodology is presented to solve the optimal design problems of permanent magnet(PM)machines.The Alopex optimization met...Based on an Alopex optimization algorithm and a response surface model(RSM),a hybrid sub-region methodology is presented to solve the optimal design problems of permanent magnet(PM)machines.The Alopex optimization method is processed both in subspace and in global solution space.In order to decrease the computing time,a multi quadric radial basis function(MQRBF)is embedded in the optimization.The proposed method speeds up the convergence rate while keeps the accuracy of the solution.A numerical experiment is given to validate the efficiency and effectiveness of the method.展开更多
This article presents a new two-axis solar tracker based on an online optimization algorithm so as to track the position of the sun without using its movement model.In this research,four well-known optimization algori...This article presents a new two-axis solar tracker based on an online optimization algorithm so as to track the position of the sun without using its movement model.In this research,four well-known optimization algorithms are employed to find the two unknown parameters named azimuth and zenith angles,which determine the position of the sun.The magnitude of the sunray is considered as the cost function of all algorithms.Then,several experiments are carried out to find the best optimization algorithm with optimal population size,number of iterations,and also the best initialization method.Uniform initialization leads to faster convergence compared to random initialization.The results clearly show that the particle swarm optimization algorithm with a population size of 15 and 7 iterations using uniform initialization method has better performance than the other algorithms,with a convergence time of less than 40 s.The average fitness value or voltage received by the tracker is 2.4 Volts in this method,which is higher than other methods.TLBO also performs well with a population size of 15 and 7 iterations.Afterward,the artificial neural network with one hidden layer and 20 neurons is employed to predict these two parameters in each day and moment in a year in Shiraz city according to the experimental data extracted from PSO.Number of the day from January and the time are inputs and zenith and azimuth angles are considered the output of neural network modeling.The performance of the proposed ANN model is evaluated using regression plots,demonstrating a strong correlation between predicted and target outputs.Finally,the outcomes reveal the feasibility of using online optimization algorithms and neural network modeling in an effort to bypass the complex mathematical model of mechatronic systems and predict the movement of the sun automatically.展开更多
To realize the low-resistance shape optimization design of amphibious robots,an efficient optimization design framework is proposed to improve the geometric deformation flexibility and optimization efficiency.In the p...To realize the low-resistance shape optimization design of amphibious robots,an efficient optimization design framework is proposed to improve the geometric deformation flexibility and optimization efficiency.In the proposed framework,the free-form deformation parametric model of the flat slender body is established and an analytical calculation method for the height constraints is derived.CFD method is introduced to carry out the high-precision resistance calculation and a constrained Kriging-based optimization method is built to improve the optimization efficiency by circularly infilling the new sample points which satisfying the constraints.Finally,the shape of an amphibious robot example is optimized to get the low-resistance shape and the results demonstrate that the presented optimization design framework has the advantages of simplicity,flexibility and high efficiency.展开更多
In this paper,we consider a class of mixed integer weakly concave programming problems(MIWCPP)consisting of minimizing a difference of a quadratic function and a convex function.A new necessary global optimality condi...In this paper,we consider a class of mixed integer weakly concave programming problems(MIWCPP)consisting of minimizing a difference of a quadratic function and a convex function.A new necessary global optimality conditions for MIWCPP is presented in this paper.A new local optimization method for MIWCPP is designed based on the necessary global optimality conditions,which is different from the traditional local optimization method.A global optimization method is proposed by combining some auxiliary functions and the new local optimization method.Furthermore,numerical examples are also presented to show that the proposed global optimization method for MIWCPP is efficient.展开更多
Load prediction and power prediction uncertainties are inevitable aspects of a virtual power plant(VPP).In power system economic dispatch(ED)modeling,the interval is used to describe prediction uncertainties.An ED mod...Load prediction and power prediction uncertainties are inevitable aspects of a virtual power plant(VPP).In power system economic dispatch(ED)modeling,the interval is used to describe prediction uncertainties.An ED model with interval uncertainty is established in this paper.The probability degree definition is adopted to convert the interval-based economic dispatch model into a deterministic model for the purposes of solving the modeling problem.Simulation tests are performed on a 10-machine system using professional optimization software(LINGO).The simulation results verify the validity of the proposed interval-based scheme for the economic dispatch of a power system with VPP.展开更多
The discontinuous dynamical problem of multi-point contact and collision in multi-body system has always been a hot and difficult issue in this field.Based on the Gauss’principle of least constraint,a unified optimiz...The discontinuous dynamical problem of multi-point contact and collision in multi-body system has always been a hot and difficult issue in this field.Based on the Gauss’principle of least constraint,a unified optimization model for multibody system dynamics with multi-point contact and collision is established.The paper presents the study of the numerical solution scheme,in which particle swarm optimization method is used to deal with the corresponding optimization model.The article also presents the comparison of the Gauss optimization method(GOM)and the hybrid linear complementarity method(i.e.combining differential algebraic equations(DAEs)and linear complementarity problems(LCP)),commonly used to solve the dynamic contact problem of multibody systems with bilateral constraints.The results illustrate that,the GOM has the same advantage of dynamical modelling with LCP and when the redundant constraint exists,the GOM always has a unique solution and so no additional processing is needed,whereas the corresponding DAE-LCP method may have singular cases with multiple solutions or no solutions.Using numerical examples,the GOM is verified to effectively solve the dynamics of multibody systems with redundant unilateral and bilateral constraints without additional redundancy processing.The GOM can also be applied to the optimal control of systems in the future and combined with the parameter optimization of systems to handle dynamic problems.The work given provides the dynamics and control of the complex system with a new train of thought and method.展开更多
In the present work, we investigate the inverse problem of reconstructing the parameter of an integro-differential parabolic equation, which comes from pollution problems in porous media, when the final observation is...In the present work, we investigate the inverse problem of reconstructing the parameter of an integro-differential parabolic equation, which comes from pollution problems in porous media, when the final observation is given. We use the optimal control framework to establish both the existence and necessary condition of the minimizer for the cost func- tional. Furthermore, we prove the stability and the local uniqueness of the minimizer. Some numerical results will be presented and discussed.展开更多
The layout of power modules is a crucial design consideration,especially for silicon carbide devices.For electrical layout,optimizing the parasitic parameters can improving switching loss and dynamic behavior.For ther...The layout of power modules is a crucial design consideration,especially for silicon carbide devices.For electrical layout,optimizing the parasitic parameters can improving switching loss and dynamic behavior.For thermal layout,reducing the thermal resistance and controlling thermal capacitance can reduce the local hot point.Conventional layout design iterations are based on human knowledge and experience.But the major drawback of manual design methods is a limited choice of candidates,large time consumption and also the lack of consistency.With the introduce of automatic layout design,these challenges can be overcome which in the meanwhile alleviates current and temperature imbalance.By reviewing element representation,placement,routing,fitness evaluation,and the optimization algorithm approaches,a state-of-the-art power module layout design method for electric vehicle applications is introduced.展开更多
Topology optimization(TO),a numerical technique to find the optimalmaterial layoutwith a given design domain,has attracted interest from researchers in the field of structural optimization in recent years.For beginner...Topology optimization(TO),a numerical technique to find the optimalmaterial layoutwith a given design domain,has attracted interest from researchers in the field of structural optimization in recent years.For beginners,opensource codes are undoubtedly the best alternative to learning TO,which can elaborate the implementation of a method in detail and easily engage more people to employ and extend the method.In this paper,we present a summary of various open-source codes and related literature on TO methods,including solid isotropic material with penalization(SIMP),evolutionary method,level set method(LSM),moving morphable components/voids(MMC/MMV)methods,multiscale topology optimization method,etc.Simultaneously,we classify the codes into five levels,fromeasy to difficult,depending on their difficulty,so that beginners can get started and understand the form of code implementation more quickly.展开更多
Redundancy is an important attribute of a resilient urban drainage system.While there is a lack of knowledge on where to increase redundancy and its contribution to resilience,this study developed a framework for the ...Redundancy is an important attribute of a resilient urban drainage system.While there is a lack of knowledge on where to increase redundancy and its contribution to resilience,this study developed a framework for the optimal network structure of urban drainage systems that considers pipeline redundancies.Graph theory and adaptive genetic algorithms were used to obtain the initial layout and design of the urban drainage system.The introduction of additional water paths(in loop)/redundancies is suggested by the results of complex network analysis to increase resilience.The drainage performances of the urban drainage system with pipeline redundancies,and without redundancies,were compared.The proposed method was applied to the study area in Dongying City,Shandong Province,China.The results show that the total overflow volume of the urban drainage system with pipeline redundancies under rainfall exceeding the design standard(5 years) is reduced by 20-30%,which is substantially better than the network without pipeline redundancies.展开更多
In this paper,an optimality condition for nonlinear programming problems with box constraints is given by using linear transformation and Lagrange interpolating polynomials.Based on this condition,two new local optim...In this paper,an optimality condition for nonlinear programming problems with box constraints is given by using linear transformation and Lagrange interpolating polynomials.Based on this condition,two new local optimization methods are developed.The solution points obtained by the new local optimization methods can improve the Karush–Kuhn–Tucker(KKT)points in general.Two global optimization methods then are proposed by combining the two new local optimization methods with a filled function method.Some numerical examples are reported to show the effectiveness of the proposed methods.展开更多
Improving drilling efficiency is the best way to reduce drilling costs and the choice of the drilling mode is instrumental in doing so.At present,however,a standard approach for the optimization of these processes doe...Improving drilling efficiency is the best way to reduce drilling costs and the choice of the drilling mode is instrumental in doing so.At present,however,a standard approach for the optimization of these processes does not exists yet.Through a comparative statistical analysis of the rock-breaking mechanisms and the characteristics of different drilling methods,this research proposes a set of cues to achieve this objective.Available statistical data are classified by means of a fuzzy cluster analysis according to the anti-drilling characteristic parameters of formation.The results show that different drilling methods rely on their own rock breaking mechanisms and have distinct characteristics.The rotary table drilling method is the most commonly used drilling mode,however,it displays some limitations with regard to deep wells,ultra-deep wells and difficult formations.The combined drilling method has the advantages of both the rotary table drilling and the down-hole power drilling modes.Polycrystalline diamond compact(PDC)drill bits can lead to good results for medium hardness and weakly abrasive formations.Underbalanced drilling for formations with high hardness and strong abrasiveness displays some limitations.展开更多
Consider the inverse diffraction problem to determine a two-dimensional periodic structure from scattered elastic waves measured above the structure.We formulate the inverse problem as a least squares optimization pro...Consider the inverse diffraction problem to determine a two-dimensional periodic structure from scattered elastic waves measured above the structure.We formulate the inverse problem as a least squares optimization problem,following the two-step algorithm by G.Bruckner and J.Elschner[Inverse Probl.,19(2003),315–329]for electromagnetic diffraction gratings.Such a method is based on the Kirsch-Kress optimization scheme and consists of two parts:a linear severely ill-posed problem and a nonlinear well-posed one.We apply this method to both smooth(C2)and piecewise linear gratings for the Dirichlet boundary value problem of the Navier equation.Numerical reconstructions from exact and noisy data illustrate the feasibility of the method.展开更多
基金supported by the National Natural Science Foundation of China(12171106)the Natural Science Foundation of Guangxi Province(2020GXNSFDA238017 and 2018GXNSFFA281007)the Shanghai Sailing Program(21YF1430300)。
文摘This paper discusses the two-block large-scale nonconvex optimization problem with general linear constraints.Based on the ideas of splitting and sequential quadratic optimization(SQO),a new feasible descent method for the discussed problem is proposed.First,we consider the problem of quadratic optimal(QO)approximation associated with the current feasible iteration point,and we split the QO into two small-scale QOs which can be solved in parallel.Second,a feasible descent direction for the problem is obtained and a new SQO-type method is proposed,namely,splitting feasible SQO(SF-SQO)method.Moreover,under suitable conditions,we analyse the global convergence,strong convergence and rate of superlinear convergence of the SF-SQO method.Finally,preliminary numerical experiments regarding the economic dispatch of a power system are carried out,and these show that the SF-SQO method is promising.
基金This work was supported by the National Natural Science Foundation of China(10071037)
文摘In this paper, a new derivative free trust region method is developed based on the conic interpolation model for the unconstrained optimization. The conic interpolation model is built by means of the quadratic model function, the collinear scaling formula, quadratic approximation and interpolation. All the parameters in this model are determined by objective function interpolation condition. A new derivative free method is developed based upon this model and the global convergence of this new method is proved without any information on gradient.
基金University Putra Malaysia under Putra Grant No.9531200。
文摘Previous studies about optimizing earthquake structural energy dissipation systems indicated that most existing techniques employ merely one or a few parameters as design variables in the optimization process,and thereby are only applicable only to simple,single,or multiple degree-of-freedom structures.The current approaches to optimization procedures take a specific damper with its properties and observe the effect of applying time history data to the building;however,there are many different dampers and isolators that can be used.Furthermore,there is a lack of studies regarding the optimum location for various viscous and wall dampers.The main aim of this study is hybridization of the particle swarm optimization(PSO) and gravitational search algorithm(GSA) to optimize the performance of earthquake energy dissipation systems(i.e.,damper devices) simultaneously with optimizing the characteristics of the structure.Four types of structural dampers device are considered in this study:(ⅰ) variable stiffness bracing(VSB) system,(ⅱ) rubber wall damper(RWD),(ⅲ) nonlinear conical spring bracing(NCSB) device,(iv) and multi-action stiffener(MAS) device.Since many parameters may affect the design of seismic resistant structures,this study proposes a hybrid of PSO and GSA to develop a hybrid,multi-objective optimization method to resolve the aforementioned problems.The characteristics of the above-mentioned damper devices as well as the section size for structural beams and columns are considered as variables for development of the PSO-GSA optimization algorithm to minimize structural seismic response in terms of nodal displacement(in three directions) as well as plastic hinge formation in structural members simultaneously with the weight of the structure.After that,the optimization algorithm is implemented to identify the best position of the damper device in the structural frame to have the maximum effect and minimize the seismic structure response.To examine the performance of the proposed PSO-GSA optimization method,it has been applied to a three-story reinforced structure equipped with a seismic damper device.The results revealed that the method successfully optimized the earthquake energy dissipation systems and reduced the effects of earthquakes on structures,which significantly increase the building’s stability and safety during seismic excitation.The analysis results showed a reduction in the seismic response of the structure regarding the formation of plastic hinges in structural members as well as the displacement of each story to approximately 99.63%,60.5%,79.13% and 57.42% for the VSB device,RWD,NCSB device,and MAS device,respectively.This shows that using the PSO-GSA optimization algorithm and optimized damper devices in the structure resulted in no structural damage due to earthquake vibration.
基金acknowledge the Fundamental Research Funds for the Central Universities(Grants No 309190112102)the Natural Science Foundation of Jiangsu Province(Grants No BK20200493).
文摘In this paper,a passive muzzle arc control device(PMACD)of the augmented railguns is studied.By discussing its performance at different numbers of extra rails,a parameter optimization model is proposed.Through the calculation model,it is found that the PMACD works well in the simple railgun,which refers to the gun that there is only one pair of rails in the inner bore.The PMACD may decrease the simple railgun’s armature peak current and muzzle arc,but affect its muzzle velocity not much.However,in the augmented railguns it has different characteristics.If the parameters of the PMACD are not selected suitable.It may increase the armature peak current and muzzle arc,but greatly decrease the velocity.The reason for this problem is that the extra rails generate a strong magnetic field in front of the armature,which induces a large current to change the armature current.It is also found that when the resistance and inductance parameters of the PMACD satisfy with the optimization formula,the PMACD can also play a good role in arc suppression in the augmented railguns.Experiments of an augmented railgun with a stainless steel PMACD are carried out to verify this optimization method.Results show that the muzzle arc is obviously controlled.This work may provide a reference for the design of the muzzle arc control device.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51675506 and 51275504)the German Research Foundation(DFG)(Grant Nos.#ZA 422/5-1 and#ZA 422/6-1)
文摘A topology optimization method based on the solid isotropic material with penalization interpolation scheme is utilized for designing gradient coils for use in magnetic resonance microscopy. Unlike the popular stream function method, the proposed method has design variables that are the distribution of conductive material. A voltage-driven transverse gradient coil is proposed to be used as micro-scale magnetic resonance imaging(MRI) gradient coils, thus avoiding introducing a coil-winding pattern and simplifying the coil configuration. The proposed method avoids post-processing errors that occur when the continuous current density is approximated by discrete wires in the stream function approach. The feasibility and accuracy of the method are verified through designing the z-gradient and y-gradient coils on a cylindrical surface.Numerical design results show that the proposed method can provide a new coil layout in a compact design space.
基金Sponsored by the National Program"973"Project (2005CB623906)
文摘In order to implement the optimal design of the indoor thermal comfort based on the numerical modeling method, the numerical calculation platform is combined seamlessly with the data-processing platform, and an interactive numerical calculation platform which includes the functions of numerical simulation and optimization is established. The artificial neural network (ANN) and the greedy strategy are introduced into the hill-climbing pattern heuristic search process, and the optimizing search direction can be predicted by using small samples; when searching along the direction using the greedy strategy, the optimal values can be quickly approached. Therefore, excessive external calling of the numerical modeling process can be avoided, and the optimization time is decreased obviously. The experimental results indicate that the satisfied output parameters of air conditioning can be quickly given out based on the interactive numerical calculation platform and the improved search method, and the optimization for indoor thermal comfort can be completed.
文摘During the construction process of the construction project,the construction technology management work can improve the overall quality of the project construction.In the context of increasingly fierce competition in the construction market,construction enterprises should strengthen the management of construction technology,enhance their technical level and market competitiveness,and promote the development of the construction market[1].The paper mainly analyzes the optimization methods of build-Keywords:ing construction technology management.
文摘Based on an Alopex optimization algorithm and a response surface model(RSM),a hybrid sub-region methodology is presented to solve the optimal design problems of permanent magnet(PM)machines.The Alopex optimization method is processed both in subspace and in global solution space.In order to decrease the computing time,a multi quadric radial basis function(MQRBF)is embedded in the optimization.The proposed method speeds up the convergence rate while keeps the accuracy of the solution.A numerical experiment is given to validate the efficiency and effectiveness of the method.
文摘This article presents a new two-axis solar tracker based on an online optimization algorithm so as to track the position of the sun without using its movement model.In this research,four well-known optimization algorithms are employed to find the two unknown parameters named azimuth and zenith angles,which determine the position of the sun.The magnitude of the sunray is considered as the cost function of all algorithms.Then,several experiments are carried out to find the best optimization algorithm with optimal population size,number of iterations,and also the best initialization method.Uniform initialization leads to faster convergence compared to random initialization.The results clearly show that the particle swarm optimization algorithm with a population size of 15 and 7 iterations using uniform initialization method has better performance than the other algorithms,with a convergence time of less than 40 s.The average fitness value or voltage received by the tracker is 2.4 Volts in this method,which is higher than other methods.TLBO also performs well with a population size of 15 and 7 iterations.Afterward,the artificial neural network with one hidden layer and 20 neurons is employed to predict these two parameters in each day and moment in a year in Shiraz city according to the experimental data extracted from PSO.Number of the day from January and the time are inputs and zenith and azimuth angles are considered the output of neural network modeling.The performance of the proposed ANN model is evaluated using regression plots,demonstrating a strong correlation between predicted and target outputs.Finally,the outcomes reveal the feasibility of using online optimization algorithms and neural network modeling in an effort to bypass the complex mathematical model of mechatronic systems and predict the movement of the sun automatically.
基金financially supported by the National Natural Science Foundation of China(Grant No.52372356).
文摘To realize the low-resistance shape optimization design of amphibious robots,an efficient optimization design framework is proposed to improve the geometric deformation flexibility and optimization efficiency.In the proposed framework,the free-form deformation parametric model of the flat slender body is established and an analytical calculation method for the height constraints is derived.CFD method is introduced to carry out the high-precision resistance calculation and a constrained Kriging-based optimization method is built to improve the optimization efficiency by circularly infilling the new sample points which satisfying the constraints.Finally,the shape of an amphibious robot example is optimized to get the low-resistance shape and the results demonstrate that the presented optimization design framework has the advantages of simplicity,flexibility and high efficiency.
基金supported by Natural Science Foundation of Chongqing(Nos.cstc2013jjB00001 and cstc2011jjA00010).
文摘In this paper,we consider a class of mixed integer weakly concave programming problems(MIWCPP)consisting of minimizing a difference of a quadratic function and a convex function.A new necessary global optimality conditions for MIWCPP is presented in this paper.A new local optimization method for MIWCPP is designed based on the necessary global optimality conditions,which is different from the traditional local optimization method.A global optimization method is proposed by combining some auxiliary functions and the new local optimization method.Furthermore,numerical examples are also presented to show that the proposed global optimization method for MIWCPP is efficient.
基金supported by the State Grid Corporation of China Project:Study on Key Technologies for Power and Frequency Control of System with Source-Grid-Load Interactions,and sponsored by NUPTSF(under Grant XJKY14018).
文摘Load prediction and power prediction uncertainties are inevitable aspects of a virtual power plant(VPP).In power system economic dispatch(ED)modeling,the interval is used to describe prediction uncertainties.An ED model with interval uncertainty is established in this paper.The probability degree definition is adopted to convert the interval-based economic dispatch model into a deterministic model for the purposes of solving the modeling problem.Simulation tests are performed on a 10-machine system using professional optimization software(LINGO).The simulation results verify the validity of the proposed interval-based scheme for the economic dispatch of a power system with VPP.
基金This study was funded by the National Natural Science Foundation of China(Grant 11272167).
文摘The discontinuous dynamical problem of multi-point contact and collision in multi-body system has always been a hot and difficult issue in this field.Based on the Gauss’principle of least constraint,a unified optimization model for multibody system dynamics with multi-point contact and collision is established.The paper presents the study of the numerical solution scheme,in which particle swarm optimization method is used to deal with the corresponding optimization model.The article also presents the comparison of the Gauss optimization method(GOM)and the hybrid linear complementarity method(i.e.combining differential algebraic equations(DAEs)and linear complementarity problems(LCP)),commonly used to solve the dynamic contact problem of multibody systems with bilateral constraints.The results illustrate that,the GOM has the same advantage of dynamical modelling with LCP and when the redundant constraint exists,the GOM always has a unique solution and so no additional processing is needed,whereas the corresponding DAE-LCP method may have singular cases with multiple solutions or no solutions.Using numerical examples,the GOM is verified to effectively solve the dynamics of multibody systems with redundant unilateral and bilateral constraints without additional redundancy processing.The GOM can also be applied to the optimal control of systems in the future and combined with the parameter optimization of systems to handle dynamic problems.The work given provides the dynamics and control of the complex system with a new train of thought and method.
基金supported in part by the CNRST Morocco,the Volkswagen Foundation:Grant number I/79315Hydromed project
文摘In the present work, we investigate the inverse problem of reconstructing the parameter of an integro-differential parabolic equation, which comes from pollution problems in porous media, when the final observation is given. We use the optimal control framework to establish both the existence and necessary condition of the minimizer for the cost func- tional. Furthermore, we prove the stability and the local uniqueness of the minimizer. Some numerical results will be presented and discussed.
基金Supported by the National Key Research and Development Program of China(2016YFB0100600)the Key Program of Bureau of Frontier Sciences and Education,Chinese Academy of Sciences(QYZDBSSW-JSC044).
文摘The layout of power modules is a crucial design consideration,especially for silicon carbide devices.For electrical layout,optimizing the parasitic parameters can improving switching loss and dynamic behavior.For thermal layout,reducing the thermal resistance and controlling thermal capacitance can reduce the local hot point.Conventional layout design iterations are based on human knowledge and experience.But the major drawback of manual design methods is a limited choice of candidates,large time consumption and also the lack of consistency.With the introduce of automatic layout design,these challenges can be overcome which in the meanwhile alleviates current and temperature imbalance.By reviewing element representation,placement,routing,fitness evaluation,and the optimization algorithm approaches,a state-of-the-art power module layout design method for electric vehicle applications is introduced.
基金supported by the National Key R&D Program of China[Grant Number 2020YFB1708300]the National Natural Science Foundation of China[Grant Number 52075184].
文摘Topology optimization(TO),a numerical technique to find the optimalmaterial layoutwith a given design domain,has attracted interest from researchers in the field of structural optimization in recent years.For beginners,opensource codes are undoubtedly the best alternative to learning TO,which can elaborate the implementation of a method in detail and easily engage more people to employ and extend the method.In this paper,we present a summary of various open-source codes and related literature on TO methods,including solid isotropic material with penalization(SIMP),evolutionary method,level set method(LSM),moving morphable components/voids(MMC/MMV)methods,multiscale topology optimization method,etc.Simultaneously,we classify the codes into five levels,fromeasy to difficult,depending on their difficulty,so that beginners can get started and understand the form of code implementation more quickly.
基金This study was supported by the Chinese National Natural Science Foundation(Grant No.51739011 and 52192671)the Research Fund of the State Key Laboratory of Simulation and Regulation of Water Cycles in River Basins(Grant No.SKL2022TS11).
文摘Redundancy is an important attribute of a resilient urban drainage system.While there is a lack of knowledge on where to increase redundancy and its contribution to resilience,this study developed a framework for the optimal network structure of urban drainage systems that considers pipeline redundancies.Graph theory and adaptive genetic algorithms were used to obtain the initial layout and design of the urban drainage system.The introduction of additional water paths(in loop)/redundancies is suggested by the results of complex network analysis to increase resilience.The drainage performances of the urban drainage system with pipeline redundancies,and without redundancies,were compared.The proposed method was applied to the study area in Dongying City,Shandong Province,China.The results show that the total overflow volume of the urban drainage system with pipeline redundancies under rainfall exceeding the design standard(5 years) is reduced by 20-30%,which is substantially better than the network without pipeline redundancies.
基金the National Natural Science Foundation of China(No.11471062).
文摘In this paper,an optimality condition for nonlinear programming problems with box constraints is given by using linear transformation and Lagrange interpolating polynomials.Based on this condition,two new local optimization methods are developed.The solution points obtained by the new local optimization methods can improve the Karush–Kuhn–Tucker(KKT)points in general.Two global optimization methods then are proposed by combining the two new local optimization methods with a filled function method.Some numerical examples are reported to show the effectiveness of the proposed methods.
文摘Improving drilling efficiency is the best way to reduce drilling costs and the choice of the drilling mode is instrumental in doing so.At present,however,a standard approach for the optimization of these processes does not exists yet.Through a comparative statistical analysis of the rock-breaking mechanisms and the characteristics of different drilling methods,this research proposes a set of cues to achieve this objective.Available statistical data are classified by means of a fuzzy cluster analysis according to the anti-drilling characteristic parameters of formation.The results show that different drilling methods rely on their own rock breaking mechanisms and have distinct characteristics.The rotary table drilling method is the most commonly used drilling mode,however,it displays some limitations with regard to deep wells,ultra-deep wells and difficult formations.The combined drilling method has the advantages of both the rotary table drilling and the down-hole power drilling modes.Polycrystalline diamond compact(PDC)drill bits can lead to good results for medium hardness and weakly abrasive formations.Underbalanced drilling for formations with high hardness and strong abrasiveness displays some limitations.
基金the support by the German Research Foundation(DFG)under Grant No.EL 584/1-2.
文摘Consider the inverse diffraction problem to determine a two-dimensional periodic structure from scattered elastic waves measured above the structure.We formulate the inverse problem as a least squares optimization problem,following the two-step algorithm by G.Bruckner and J.Elschner[Inverse Probl.,19(2003),315–329]for electromagnetic diffraction gratings.Such a method is based on the Kirsch-Kress optimization scheme and consists of two parts:a linear severely ill-posed problem and a nonlinear well-posed one.We apply this method to both smooth(C2)and piecewise linear gratings for the Dirichlet boundary value problem of the Navier equation.Numerical reconstructions from exact and noisy data illustrate the feasibility of the method.