Seismic effectiveness evaluation and optimized design of tie up method for securing museum collections

To quantify the seismic effectiveness of the most commonly used fishing line tie up method for securing museum collections and optimize fixed strategies for exhibitions,shaking table tests of the seismic systems used for typical museum collection replicas have been carried out.The influence of body shape and fixed measure parameters on the seismic responses of replicas and the interaction behavior between replicas and fixed measures have been explored.Based on the results,seismic effectiveness evaluation indexes of the tie up method are proposed.Reasonable suggestions for fixed strategies are given,which provide a basis for the exhibition of delicate museum collections considering the principle of minimizing seismic responses and intervention.The analysis results show that a larger ratio of height of mass center to bottom diameter led to more intense rocking responses.Increasing the initial pretension of fishing lines was conducive to reducing the seismic responses and stress variation of the lines.Through comprehensive consideration of the interaction forces and effective securement,it is recommended to apply 20%of breaking stress as the initial pretension.For specific museum collections that cannot be effectively protected by the independent tie up method,an optimized strategy of a combination of fishing lines and fasteners is recommended.

Retraction:Optimized Design of Bio-inspired Wind Turbine Blades

The published article titled“Optimized Design of Bio-inspired Wind Turbine Blades”has been retracted from Fluid Dynamics&Materials Processing.

Optimized Design of Bio-Inspired Wind Turbine Blades

To enhance the aerodynamic performance of wind turbine blades,this study proposes the adoption of a bionic airfoil inspired by the aerodynamic shape of an eagle.Based on the blade element theory,a non-uniform extraction method of blade elements is employed for the optimization design of the considered wind turbine blades.Moreover,Computational Fluid Dynamics(CFD)is used to determine the aerodynamic performances of the eagle airfoil and a NACA2412 airfoil,thereby demonstrating the superior aerodynamic performance of the former.Finally,a mathematical model for optimizing the design of wind turbine blades is introduced and a comparative analysis is conducted with respect to the aerodynamic performances of blades designed using a uniform extraction approach.It is found that the blades designed using non-uniform extraction exhibit better aerodynamic performance.

水田动力底盘逆向建模与质心验证——基于Geomagic Design X

针对目前农业机械仿真和优化模型精度不高的问题,提出了一种构建精确模型的逆向建模方法。应用光学扫描仪采集点云数据,基于Geomagic Design X处理点云数据并重构零部件模型,在SolidWorks中完成水田动力底盘的装配。以VP6D-CQ型水田动力底盘为例,将测得的实际质心位置与所建的模型质心位置进行比较,并对提出的逆向建模方法进行了试验验证以及误差分析。结果表明:总质量、x坐标、y坐标、z坐标的误差值分别为4.55%、3.62%、2.23%、4.81%,误差值均在5%内。此方法可构建准确的三维模型,为后续仿真优化数据精确性奠定了基础,与传统的研发相比较,可缩短农业机械研发周期、降低设计成本。

App Designer辅助教学方法探索与实践——以软件无线电课程为例

软件无线电作为通信学科的必修课程,具有承上启下的重要作用。因课程原理抽象、理论公式复杂,学员在学习过程存在理解掌握难、实践应用难等问题。通过对当前软件无线电教学过程中存在的不足与困难进行分析,提出利用MATLAB App Designer辅助课程教学,从教学准备、课堂互动、自主实验、反馈提升四个方面开展课程教学改革。实践表明,该方法对于提升学员的工程思维、系统思维具有显著效果,同时可以增强学员理论联系实际的能力。

Failure mechanism of pump chambers and their optimized design in deep mining at Qishan Coal Mine

Pump chambers, normally used as dominant structures in mining engineering to insure the safety and production of un-derground coal mines, become generally deformed under conditions of deep mining. Given the geology and engineering condition of Qishan Coal Mine in Xuzhou, the failure characteristics of pump chambers at the –1000 m level show that the main cause can be attributed to the spatial effect induced by intersectional chambers, where one pump is constructed per well. We developed an opti-mized design of the pump room, in which the pump wells in the traditional design are integrated into one compounding well. We suggest that the new design can limit the spatial effect of intersectional chambers during construction given our relevant numerical simulation. The new design is able to simplify the structure of the pump chamber and reduce the amount of excavation required. Based on a bolt-mesh-anchor with a rigid gap coupling supporting technology, the stability of pump chamber can be improved greatly.

An Optimized Structure Design of the HT-7U Vacuum Vessel

The vacuum vessel of the HT-7U superconducting tokamak will be a fully-welded structure with a double-wall. The space between the double-wall will be filled with borated water for neutron shielding. Non-circular cross-section is designed for plasma elongating. Horizontal and vertical ports are designed for diagnosing, vacuum pumping, plasma heating and plasma current driving, etc. The vacuum vessel consists of 16 segments. It will be baked out at 250℃ to obtain a clean wall. When the machine is in operation, both the hot wall (the wall temperature is around 100℃) and the cold wall (wall temperature is in normal equilibrium) are considered. The stress caused by thermal deformation and the electromagnetic (EM) loads caused by 1.5 MA plasma disruption in 3.5 T magnetic field have to be taken into account in the design of the HT-7U vacuum vessel Finite element method was employed for structure analysis of the vacuum vessel.

Numerical simulation and optimized design of cased telescoped ammunition interior ballistic

In order to achieve the optimized design of a cased telescoped ammunition(CTA) interior ballistic design,a genetic algorithm was introduced into the optimal design of CTA interior ballistics with coupling the CTA interior ballistic model. Aiming at the interior ballistic characteristics of a CTA gun, the goal of CTA interior ballistic design is to obtain a projectile velocity as large as possible. The optimal design of CTA interior ballistic is carried out using a genetic algorithm by setting peak pressure, changing the chamber volume and gun powder charge density. A numerical simulation of interior ballistics based on a 35 mm CTA firing experimental scheme was conducted and then the genetic algorithm was used for numerical optimization. The projectile muzzle velocity of the optimized scheme is increased from 1168 m/s for the initial experimental scheme to 1182 m/s. Then four optimization schemes were obtained with several independent optimization processes. The schemes were compared with each other and the difference between these schemes is small. The peak pressure and muzzle velocity of these schemes are almost the same. The result shows that the genetic algorithm is effective in the optimal design of the CTA interior ballistics. This work will be lay the foundation for further CTA interior ballistic design.

High-Speed,High-Power Motor Design for a Four-Legged Robot Actuator Optimized using the Weighted Sum and Response Surface Methods

In this paper,a design is presented for a high-speed,high-power motor for a four-legged robot actuator that was optimized using the weighted sum method(WSM)based on the Taguchi method,and the response surface method(RSM).First,output torque,torque constant,torque ripple,and efficiency were selected as objective functions for the optimized design.The sampling method was implemented to use a mixed orthogonal array and the single response characteristics of each objective function were compared using the Taguchi method.Moreover,to consider the multi-response characteristic of the objective functions,WSM was applied.Second,the 2D finite element analysis result of the RSM was compared with that using the WSM.Finally,an experiment was carried out on the manufactured motor and the optimized model is presented here.

Optimized design of drilling and blasting operations in open pit mines under technical and economic uncertainties by system dynamic modelling

Drilling and blasting are the two most significant operations in open pit mines that play a crucial role in downstream stages. While previous research has focused on optimizing these operations as two separate parts or merely in a specific parameter, this paper proposes a system dynamic model(SDM) for drilling and blasting operations as an interactive system. In addition, some technical and economic uncertainties such as rock density, uniaxial compressive strength, bit life and operating costs are considered in this system to evaluate the different optimization results. For this purpose, Vensim simulation software is utilized as a powerful dynamic tool for both modelling and optimizing under deterministic and uncertain conditions. It is concluded that an integrated optimization as opposed to the deterministic approach can be efficiently achieved. This however is dependent on the parameters that are considered as uncertainties.

A novel robust design method for improving stability of optimized structures

It is known that structural optimization may lead to designs of structures having low stability and sometimes even kinematically unstable designs. This paper presents a robust design method for improving the stability of opti mized structures. A new approach is proposed, in which cer tain perturbation loads are introduced and the corresponding compliance is added to the objective function as a penaliza tion. The stability of the optimized structures can thus be improved substantially by considering structural responses to the original and the introduced loads. Numerical exam ples show the simplicity and effectiveness of the proposed method.

Optimized Design for the Plow of a Submarine Plowing Trencher

The plow of the submarine plowing trencher is one of the main functional mechanisms, and its optimization is very important. The design parameters play a very significant role in determining the requirements of the towing force of a vessel. A multi-objective genetic algorithm based on analytical models of the plow surface has been examined and applied in efforts to obtain optimal design of the plow. For a specific soil condition, the draft force and moldboard surface area which are the key parameters in the working process of the plow are optimized by finding the corresponding optimal values of the plow blade penetration angle and two surface angles of the main cutting blade of the plow. Parameters such as the moldboard side angle of deviation, moldboard lift angle, angular variation of the tangent line, and the spanning length are also analyzed with respect to the force of the moldboard surface along soil flow direction. Results show that the optimized plow has an improved plow performance. The draft forces of the main cutting blade and the moldboard are 10.6% and 7%, respectively, less than the original design. The standard deviation of Gaussian curvature of moldboard is lowered by 64.5%, which implies that the smoothness of the optimized moldboard surface is much greater than the original.

Optimized design and preparation of Ti/TiAl laminated composite

Laminated composite is a new type of composite structure which is used to improve the fracture toughness and flexure strength and is good for optimizing the mechanical properties of intermetallics. On the basis of bionic principle, the optimized design (via establishing the mathematical model, stress intensity factor K_Ⅰ was computed by the finite element method) of Ti/TiAl laminated composite was studied by varying the thickness ratio and layer amounts, then the raw materials of Ti and TiAl were evaporated and deposited alternatively to form laminated metal/intermetallic composites in vacuum chamber by electron beam physical vapor deposition method. The results show that the toughness of TiAl is improved and agrees well with theoretical analysis.

Recent advances in cobalt phosphide-based materials for electrocatalytic water splitting:From catalytic mechanism and synthesis method to optimization design

Electrochemical water splitting has long been considered an effective energy conversion technology for trans-ferring intermittent renewable electricity into hydrogen fuel,and the exploration of cost-effective and high-performance electrocatalysts is crucial in making electrolyzed water technology commercially viable.Cobalt phosphide(Co-P)has emerged as a catalyst of high potential owing to its high catalytic activity and durability in water splitting.This paper systematically reviews the latest advances in the development of Co-P-based materials for use in water splitting.The essential effects of P in enhancing the catalytic performance of the hydrogen evolution reaction and oxygen evolution reaction are first outlined.Then,versatile synthesis techniques for Co-P electrocatalysts are summarized,followed by advanced strategies to enhance the electrocatalytic performance of Co-P materials,including heteroatom doping,composite construction,integration with well-conductive sub-strates,and structure control from the viewpoint of experiment.Along with these optimization strategies,the understanding of the inherent mechanism of enhanced catalytic performance is also discussed.Finally,some existing challenges in the development of highly active and stable Co-P-based materials are clarified,and pro-spective directions for prompting the wide commercialization of water electrolysis technology are proposed.

Estimating the macrobenthic species richness with an optimized sampling design in the intertidal zone of Changjiang Estuary

It is a challenge in the field sampling to face conflict between the statistical requirements and the logistical constraints when explicitly estimating the macrobenthos species richness in the heterogeneous intertidal wetlands. To solve this problem, this study tried to design an optimal, efficient and practical sampling strategy by comprehensively focusing on the three main parts of the entire process(to optimize the sampling method, to determine the minimum sampling effort and to explore the proper sampling interval) in a typical intertidal wetland of the Changjiang(Yangtze) Estuary, China. Transect sampling was selected and optimized by stratification based on pronounced habitat types(tidal flat, tidal creek, salt marsh vegetation). This type of sampling is also termed within-transect stratification sampling. The optimal sampling intervals and the minimum sample effort were determined by two beneficial numerical methods: Monte Carlo simulations and accumulative species curves. The results show that the within-transect stratification sampling with typical habitat types was effective for encompassing 81% of the species, suggesting that this type of sampling design can largely reduce the sampling effort and labor. The optimal sampling intervals and minimum sampling efforts for three habitats were determined: sampling effort must exceed 1.8 m^2 by 10 m intervals in the salt marsh vegetation, 2 m^2 by 10 m intervals in the tidal flat, and 3 m^2 by 1 m intervals in the tidal creek habitat. It was suggested that the differences were influenced by the mobility range of the dominant species and the habitats' physical differences(e.g., tidal water, substrate, vegetation cover). The optimized sampling strategy could provide good precision in the richness estimation of macrobenthos and balance the sampling effort. Moreover, the conclusions presented here provide a reference for recommendations to consider before macrobenthic surveys take place in estuarine wetlands. The sampling strategy, focusing on the three key parts of the sampling design, had a good operational effect and could be used as a guide for field sampling for habitat management or ecosystem assessment.

Central Composite Design for Optimized Extraction of Polysaccharides from Undaria pinnatifida

Response surface methodology was used to optimize the extraction conditions of polysaccharides from Undaria pinnatifida.The effects of three independent variables,extraction time,extraction temperature and ratio of water to raw material were investigated by a central composite design.The experimental data were fitted to a second-order polynomial equation via multiple regression analysis and also examined with the appropriate statistical methods.The adjusted coefficient of determination（R^2Adj） for the model was 0.9171.An optimum extraction yield of 30.78% was obtained when the extraction temperature was 95 °C,extraction time was 4.5 h,and the ratio of water to raw material was 35（mL/g）.Under these conditions,validation experiments were done and the mean extraction yield of polysaccharides was 30.79%,which was in good agreement with the predicted model value.

A VIRTUAL MESH METHOD FOR THE OPTIMIZED DESIGN OF COMPLEX STRUCTURES

Concepts for a virtual 3D space and a hyper-sphere are proposed and the formulae for determining the computable nodes of the mesh are derived.Then a new optimization design method('Virtual Mesh Method'or V.M.M)is developed.Three examples are given,showing that the method proposed is especially suitable for the optimized design of complex structures,and that the global approximate optimal solution can be searched with remarkably reduced computational work.

An Analysis of the Kinetic Features of Scissor Elevator Mechanism and Its Optimized Design

A mathematical model has been established for the research on scissor elevator for ship passenger stairs.The kinematical and kinetic simulation analyses were carried out with MATLAB/Simulink.The relative kinetic relation between hydraulic cylinder and other parts,as well as its rules of change has been found.A 3-D model of ship scissor elevator was established with Pro/E.The design of the mechanism was optimized in Pro/MECHANICA based on the findings from simulation analysis.Practice has proved that the design is scientific and reasonable and could serve as the theoretical guidance and reference for the design of scissor mechanism of other uses.

The optimized design of a double-layer flow chamber

Introduction Blood flow provides a mechanical condition for blood cells and vessels,especially for endothelial cells.It is important to understand the mechanical characteristics of

Optimized Simulation Design of Double Glass Curtain Wall Shading System in Hot Summer and Cold Winter Zone

The glass curtain wall is widely favored by the owners for its good appearance modeling efthct. In using process, however, excessive energy consumption, low level indoor eomtort and other problems of glass curtain wall are often exposed. Aiming at office buildings in hot Summer and cold Winter zone, taking the optimization of thermal comfort of double glass curtain wall in the summer and the reduetion of building energy consumption throughout the year as the breakthrough point, using the method of energy simulation analysis, through changing the size of internal shading component in the simulated room, this paper analyzes and summarizes the variation law of its energy consumption value, to explore the relatively reasonable design plan of shading systems of the building with glass curtain wall.