Optimized Neural Network-Based Micro Strip Patch Antenna Design for Radar Application

Microstrip antennas are low-profile antennas that are utilized in wireless communication systems.In recent years,communication engineers have been increasingly interested in it.Because of downsizing,novelty,and cost reduction,the number of wireless standards has expanded in recent years.Wideband tech-nologies have evolved in addition to analog and digital services.Radars necessi-tate antenna subsystems that are low-profile and lightweight.Microstrip antennas have these qualities and are suited for radars as an alternative to the bulky and heavyweight reflector/slotted waveguide array antennas.A perforated corner single-line fed microstrip antenna is designed here.When compared to the basic square microstrip antenna,this antenna has better specifications.Because key issue is determining the best values for various antenna parameters when devel-oping the patch antenna.Optimized Neural Network(ONN)is one potential tech-nique utilized to solve this issue,and this work also uses Particle Swarm Optimization(PSO)to enhance the antenna performance.Return loss(S11)and Voltage Standing Wave Ratio(VSWR)parameters are considered in all situations,developed with Advanced Design System(ADS)applications.The transmitters are made to emit in the Ku-band,which covers a wide range of wavelengths.From 5–15 GHz,it is used in most current radars.The ADS suite is used to create the simulation design.

Optimization of a crude distillation unit using a combination of wavelet neural network and line-up competition algorithm

The modeling and optimization of an industrial-scale crude distillation unit （CDU） are addressed. The main spec- ifications and base conditions of CDU are taken from a crude oil refinery in Wuhan, China. For modeling of a com- plicated CDU, an improved wavelet neural network （WNN） is presented to model the complicated CDU, in which novel parametric updating laws are developed to precisely capture the characteristics of CDU. To address CDU in an economically optimal manner, an economic optimization algorithm under prescribed constraints is presented. By using a combination of WNN-based optimization model and line-up competition algorithm （LCA）, the supe- rior performance of the proposed approach is verified. Compared with the base operating condition, it is validat- ed that the increments of products including kerosene and diesel are up to 20% at least by increasing less than 5% duties of intermediate coolers such as second pump-around （PA2） and third Dump-around （PA3）.

A New Searching Strategy for the Lost Plane Based on RBF Neural Network Model and Global Optimization Model

In this paper, we construct two models for the searching task for a lost plane. Model 1 determines the searching area. We predict the trajectory of floats generated after the disintegration of the plane by using RBF neural network model, and then determine the searching area according to the trajectory. With the pass of time, the searching area will also be constantly moving along the trajectory. Model 2 develops a maritime search plan to achieve the purpose of completing the search in the shortest time. We optimize the searching time and transform the problem into the 0-1 knapsack problem. Solving this problem by improved genetic algorithm, we can get the shortest searching time and the best choice for the search power.

STUDY ON THE METEOROLOGICAL PREDICTION MODEL USING THE LEARNING ALGORITHM OF NEURAL ENSEMBLE BASED ON PSO ALGORITHMS

Because of the difficulty in deciding on the structure of BP neural network in operational meteorological application and the tendency for the network to transform to an issue of local solution, a hybrid Particle Swarm Optimization Algorithm based on Artificial Neural Network (PSO-BP) model is proposed for monthly mean rainfall of the whole area of Guangxi. It combines Particle Swarm Optimization (PSO) with BP, that is, the number of hidden nodes and connection weights are optimized by the implementation of PSO operation. The method produces a better network architecture and initial connection weights, trains the traditional backward propagation again by training samples. The ensemble strategy is carried out for the linear programming to calculate the best weights based on the "east sum of the error absolute value" as the optimal rule. The weighted coefficient of each ensemble individual is obtained. The results show that the method can effectively improve learning and generalization ability of the neural network.

Recognition and classification of paddy leaf diseases using Optimized Deep Neural network with Jaya algorithm

In the agriculture field,one of the recent research topics is recognition and classification of diseases from the leaf images of a plant.The recognition of agricultural plant diseases by utilizing the image processing techniques will minimize the reliance on the farmers to protect the agricultural products.In this paper,Recognition and Classification of Paddy Leaf Diseases using Optimized Deep Neural Network with Jaya Algorithm is proposed.For the image acquisition the images of rice plant leaves are directly captured from the farm field for normal,bacterial blight,brown spot,sheath rot and blast diseases.In pre-processing,for the background removal the RGB images are converted into HSV images and based on the hue and saturation parts binary images are extracted to split the diseased and non-diseased part.For the segmentation of diseased portion,normal portion and background a clustering method is used.Classification of diseases is carried out by using Optimized Deep Neural Network with Jaya Optimization Algorithm(DNN_JOA).In order to precise the stability of this approach a feedback loop is generated in the post processing step.The experimental results are evaluated and compared with ANN,DAE and DNN.The proposed method achieved high accuracy of 98.9%for the blast affected,95.78%for the bacterial blight,92%for the sheath rot,94%for the brown spot and 90.57%for the normal leaf image.

Deep Learning Applied to Computational Mechanics:A Comprehensive Review,State of the Art,and the Classics

Three recent breakthroughs due to AI in arts and science serve as motivation:An award winning digital image,protein folding,fast matrix multiplication.Many recent developments in artificial neural networks,particularly deep learning(DL),applied and relevant to computational mechanics(solid,fluids,finite-element technology)are reviewed in detail.Both hybrid and pure machine learning(ML)methods are discussed.Hybrid methods combine traditional PDE discretizations with ML methods either(1)to help model complex nonlinear constitutive relations,(2)to nonlinearly reduce the model order for efficient simulation(turbulence),or(3)to accelerate the simulation by predicting certain components in the traditional integration methods.Here,methods(1)and(2)relied on Long-Short-Term Memory(LSTM)architecture,with method(3)relying on convolutional neural networks.Pure ML methods to solve(nonlinear)PDEs are represented by Physics-Informed Neural network(PINN)methods,which could be combined with attention mechanism to address discontinuous solutions.Both LSTM and attention architectures,together with modern and generalized classic optimizers to include stochasticity for DL networks,are extensively reviewed.Kernel machines,including Gaussian processes,are provided to sufficient depth for more advanced works such as shallow networks with infinite width.Not only addressing experts,readers are assumed familiar with computational mechanics,but not with DL,whose concepts and applications are built up from the basics,aiming at bringing first-time learners quickly to the forefront of research.History and limitations of AI are recounted and discussed,with particular attention at pointing out misstatements or misconceptions of the classics,even in well-known references.Positioning and pointing control of a large-deformable beam is given as an example.

A New Hybrid Method for Constrained Global Optimization

By combining properly the simulated annealing algorithm and the nonlinear programming neural network, a new hybrid method for comtrained global optimization is proposed in this paper. To maintain the applicability of the simulated annealing algorithm used in the hybrid method as general as possible, the nonlinear programming neural network is employed at each iteration to find only a feasible solution to the original constrained problem rather than a local optimal solution. Such a feasible solution is obtained by solving an auxiliary optimization problem with a new objective function. The computational results for two numerical examples indicate that the proposed hybrid method for constrained global optimization is not only highly reliable but also much more effcient than the simulated annealing algorithm using the penalty function method to deal with the constraints.

Intelligent Islanding Detection of Multi-distributed Generation Using Artificial Neural Network Based on Intrinsic Mode Function Feature

The integration of distributed energy resources(DERs) into distribution networks is becoming increasingly important, as it supports the continued adoption of renewable power generation, combined heat and power plants, and storage systems. Nevertheless, inadvertent islanding operation is one of the major protection issues in distribution networks connected to DERs. This study proposes an intelligent islanding detection method(IIDM) using an intrinsic mode function(IMF)feature-based grey wolf optimized artificial neural network(GWO-ANN). In the proposed IIDM, the modal voltage signal is pre-processed by variational mode decomposition followed by Hilbert transform on each IMF to derive highly involved features. Then, the energy and standard deviation of IMFs are employed to train/test the GWO-ANN model for identifying the islanding operations from other non-islanding events. To evaluate the performance of the proposed IIDM, various islanding and non-islanding conditions such as faults, voltage sag, linear and nonlinear load and switching, are considered as the training and testing datasets. Moreover, the proposed IIDM is evaluated under noise conditions for the measured voltage signal. The simulation results demonstrate that the proposed IIDM is capable of differentiating between islanding and non-islanding events without any sensitivity under noise conditions in the test signal.

Optimization of clay material mixture ratio and filling process in gypsum mine goaf

Because there is neither waste rock nor mill tailings in the gypsum mine, and the buildings on the goaf of gypsum mine are needed to be protected, the research proposed the scheme of the clay filling technology. Gypsum, cement, lime and water glass were used as adhesive, and the strength of different material ratios were investigated in this study. The influence factors of clay strength were obtained in the order of cement, gypsum, water glass and lime. The results show that the cement content is the determinant influence factor, and gypsum has positive effects, while the water glass can enhance both clay strength and the fluidity of the filing slurry. Furthermore, combining chaotic optimization method with neural network, the optimal ratio of composite cementing agent was obtained. The results show that the optimal ratio of water glass, cement, lime and clay (in quality) is 1.17:6.74:4.17:87.92 in the process of bottom self-flow filling, while the optimal ratio is 1.78:9.58:4.71:83.93 for roof-contacted filling. A novel filling process to fill in gypsum mine goaf with clay is established. The engineering practice shows that the filling cost is low, thus, notable economic benefit is achieved.

Research and Implementation of Decreasing the Acetic Acid Consumption in Purified Terephthalic Acid Solvent System

Decreasing the acetic acid consumption in purified terephthalic acid （PTA） solvent system has become a hot issue with common concern. In accordance with the technical features, the electrical conductivity is in direct proportion to the acetic acid content. General regression neural network （GRNN） is used to establish the model of electrical conductivity on the basis of mechanism analysis, and then particle swarm optimization （PSO） algorithm with the improvement of inertia weight and population diversity is proposed to regulate the operating conditions. Thus, the method of decreasing the acid loss is derived and applied to PTA solvent system in a chemical plant. Cases studies show that the precision of modeling and optimization are higher. The results also provide the optimal operating conditions, which decrease the cost and improve the profit.

Optimizing control of coal flotation by neuro-immune algorithm

Coal flotation is widely used to separate commercially valuable coal from the fine ore slurry, and is an industrial process with nonlinear, multivariable, time-varying and long time-delay characteristics. The online detection of ash content of products as the operation performance evaluation in the flotation system is extraordinarily difficult because of the low solid content and numerous micro-bubbles in the slurry. Moreover, it is time-consuming by manual analysis. Consequently, the optimal separation is not usually maintained. A novel technique, called the neuro-immune algorithm (NIA) inspired by the biological nervous and immune systems, is presented in this paper for predicting the ash content of clean coal and performing the optimizing control to the coal flotation system. The proposed algorithm integrates the deeply-studied artificial neural network (ANN) and the developing artificial immune system (AIS). A two-layer back-propagation network was constructed offline based on the historical process data under the best system situation, using five parameters: the flow and the density of raw slurry, the input flows of water, the kerosene and the GF oil, as the inputs and the ash content of clean coal as the output. The immune cell of AIS is made up of six parameters above as the antigen. The cytokine based clone selection algorithm is used to produce the relative antibody. The detailed computation procedures about the hybrid neuro-immune algorithm are minutely discussed. The ash content of clean coal was predicted by NIA using the practical process data s: (308.6 174.7 146.1 43.6 4.0 9.4), and the absolute difference between the actual and computed ash content values was 0.0967%. The optimizing control on NIA was simulated considering two different situations where the ash content of clean coal was controlled downward from 10.00% or upward from 9.20% predicted by ANN to the target value 9.50%. The results indicate that the target ash content and the value of controlling parameters are obtained after several control cycles.

Optimization of press bend forming path of aircraft integral panel

In order to design the press bend forming path of aircraft integral panels,a novel optimization method was proposed, which integrates FEM equivalent model based on previous study,the artificial neural network response surface,and the genetic algorithm.First,a multi-step press bend forming FEM equivalent model was established,with which the FEM experiments designed with Taguchi method were performed.Then,the BP neural network response surface was developed with the sample data from the FEM experiments.Furthermore,genetic algorithm was applied with the neural network response surface as the objective function. Finally,verification was carried out on a simple curvature grid-type stiffened panel.The forming error of the panel formed with the optimal path is only 0.098 39 and the calculating efficiency has been improved by 77%.Therefore,this novel optimization method is quite efficient and indispensable for the press bend forming path designing.

Simultaneous hybrid modeling of a nosiheptide fermentation process using particle swarm optimization

Hybrid modeling approaches have recently been investigated as an attractive alternative to model fermentation processes. Normally, these approaches require estimation data to train the empirical model part of a hybrid model. This may result in decreasing the generalization ability of the derived hybrid model. Therefore, a simultaneous hybrid modeling approach is presented in this paper. It transforms the training of the empirical model part into a dynamic system parameter identification problem, and thus allows training the empirical model part with only measured data. An adaptive escaping particle swarm optimization(AEPSO) algorithm with escaping and adaptive inertia weight adjustment strategies is constructed to solve the resulting parameter identification problem, and thereby accomplish the training of the empirical model part. The uniform design method is used to determine the empirical model structure. The proposed simultaneous hybrid modeling approach has been used in a lab-scale nosiheptide batch fermentation process. The results show that it is effective and leads to a more consistent model with better generalization ability when compared to existing ones. The performance of AEPSO is also demonstrated.

Ethanol mediated As(Ⅲ) adsorption onto Zn-loaded pinecone biochar：Experimental investigation,modeling,and optimization using hybrid artificial neural network-genetic algorithm approach

Organic matters（OMs） and their oxidization products often influence the fate and transport of heavy metals in the subsurface aqueous systems through interaction with the mineral surfaces. This study investigates the ethanol（EtO H）-mediated As（Ⅲ） adsorption onto Zn-loaded pinecone（PC） biochar through batch experiments conducted under Box–Behnken design. The effect of EtO H on As（Ⅲ） adsorption mechanism was quantitatively elucidated by fitting the experimental data using artificial neural network and quadratic modeling approaches. The quadratic model could describe the limiting nature of EtO H and pH on As（Ⅲ） adsorption,whereas neural network revealed the stronger influence of Et OH（64.5%） followed by pH（20.75%）and As（Ⅲ） concentration（14.75%） on the adsorption phenomena. Besides, the interaction among process variables indicated that Et OH enhances As（Ⅲ） adsorption over a pH range of2 to 7, possibly due to facilitation of ligand–metal（Zn） binding complexation mechanism.Eventually, hybrid response surface model–genetic algorithm（RSM–GA） approach predicted a better optimal solution than RSM, i.e., the adsorptive removal of As（Ⅲ）（10.47 μg/g） is facilitated at 30.22 mg C/L of Et OH with initial As（Ⅲ） concentration of 196.77 μg/L at pH 5.8. The implication of this investigation might help in understanding the application of biochar for removal of various As（Ⅲ） species in the presence of OM.

Computer-aided diabetic retinopathy diagnostic model using optimal thresholding merged with neural network

Purpose-Diabetic retinopathy(DR)is a central root of blindness all over the world.Though DR is tough to diagnose in starting stages,and the detection procedure might be time-consuming even for qualified experts.Nowadays,intelligent disease detection techniques are extremely acceptable for progress analysis and recognition of various diseases.Therefore,a computer-aided diagnosis scheme based on intelligent learning approaches is intended to propose for diagnosing DR effectively using a benchmark dataset.Design/methodology/approach-The proposed DR diagnostic procedure involves four main steps:(1)image pre-processing,(2)blood vessel segmentation,(3)feature extraction,and(4)classification.Initially,the retinal fundus image is taken for pre-processing with the help of Contrast Limited Adaptive Histogram Equalization(CLAHE)and average filter.In the next step,the blood vessel segmentation is carried out using a segmentation process with optimized gray-level thresholding.Once the blood vessels are extracted,feature extraction is done,using Local Binary Pattern(LBP),Texture Energy Measurement(TEM based on Laws of Texture Energy),and two entropy computations-Shanon’s entropy,and Kapur’s entropy.These collected features are subjected to a classifier called Neural Network(NN)with an optimized training algorithm.Both the gray-level thresholding and NN is enhanced by the Modified Levy Updated-Dragonfly Algorithm(MLU-DA),which operates to maximize the segmentation accuracy and to reduce the error difference between the predicted and actual outcomes of the NN.Finally,this classification error can correctly prove the efficiency of the proposed DR detection model.Findings-The overall accuracy of the proposed MLU-DA was 16.6%superior to conventional classifiers,and the precision of the developed MLU-DA was 22%better than LM-NN,16.6%better than PSO-NN,GWO-NN,and DA-NN.Finally,it is concluded that the implemented MLU-DA outperformed state-of-the-art algorithms in detecting DR.Originality/value-This paper adopts the latest optimization algorithm called MLU-DA-Neural Network with optimal gray-level thresholding for detecting diabetic retinopathy disease.This is the first work utilizes MLU-DA-based Neural Network for computer-aided Diabetic Retinopathy diagnosis.

Optimizing Neural Network Parameters Using Taguchi’s Design of Experiments Approach:An Application for Equivalent Stress Prediction Model of Automobile Chassis

Artificial neural networks(ANNs)have been successfully applied to problems in different fields including medicine,management,and manufacturing.One major disadvantage of ANNs is that there is no systematic approach for model design.Most literature suggests a trial-and-error method for parameter setting which requires more time.The accuracy of the ANN model greatly depends on the network parameter settings including the number of neurons,momentum,learning rate,transfer function,and training algorithm.In this paper,we apply Taguchi’s design of experiments approach to determine the optimum set of parameters for an ANN trained using feed forward back-propagation.We present a case study of an equivalent stress prediction model for an automobile chassis to demonstrate the implementation of the approach.After training the network,the optimum values of the ANN parameters are determined according to the performance statistics.The performance of the ANN is superior using the Taguchi method to optimize the parameters compared with random parameter values.

Design and Optimization of Tandem Arranged Cascade in a Transonic Compressor

This study proposed a design and optimization strategy for a tandem arranged cascade using the Non-dominated Sorting Genetic Algorithm(NSGA) Ⅱ multi-objective optimization algorithm and Back Propagation(BP) neural network technology. The NASA Stage 35 was employed as the initial bench mark in the present study and five geometric control parameters were working as the optimization parameters aiming to enhance the aerodynamic performance in terms of total pressure rise and efficiency. Results showed that the feasibility and capability of the proposed optimization strategy was successfully examined. In view of the fact that the initial tandem cascade(directly scaling down from NASA Stage 35) cannot guarantee the aerodynamic performance, first optimization trial was conducted to optimize the initial design. Results showed that the optimum can improve the flow quality whereas the separation on the blade is decayed or even eliminated particularly at the tip and root regions. However, compared with the initial tandem design, the enhancement in total pressure ratio(0.47%) and efficiency(1%) are too small to be noticed. Second investigation was particularly emphasizing on a high turning tandem compressor with an increment by 28°. The pressure rise and efficiency were augmented by 1.44% and 2.34%(compared to the initial tandem design), respectively. An important conclusion can be drawn that the optimization strategy is worthy to be used in high turning compressors with a considerable performance improvement.