The water-drop-shaped pressure hull has a good streamline,which has good application prospect in the underwater observatory.Therefore,this study conducted analytical,experimental and numerical investigation of the buc...The water-drop-shaped pressure hull has a good streamline,which has good application prospect in the underwater observatory.Therefore,this study conducted analytical,experimental and numerical investigation of the buckling properties of water-drop-shaped pressure hulls under hydrostatic pressure.A water-drop experiment was conducted to design water-drop-shaped pressure hulls with various shape indices.The critical loads for the water-drop-shaped pressure hulls were resolved by using Mushtari’s formula.Several numerical simulations including linear buckling analysis and nonlinear buckling analysis including eigenmode imperfections were performed.The results indicated that the critical loads resolved by Mushtari's formula were in good agreement with the linear buckling loads from the numerical simulations.This formula can be extended to estimate the buckling capacity of water-drop-shaped pressure hulls.In addition,three groups of pressure hulls were fabricated by using stereolithography,a rapid prototyping technique.Subsequently,three groups of the pressure hulls were subjected to ultrasonic measurements,optical scanning,hydrostatic testing and numerical analysis.The experimental results were consistent with the numerical results.The results indicate that the sharp end of the water-drop-shaped pressure hulls exhibited instability compared with the blunt end.This paper provides a new solution to the limitations of experimental studies on the water-drop-shaped pressure hulls as well as a new configuration and evaluation method for underwater observatories.展开更多
In this paper,an improved spatio-temporal alignment measurement method is presented to address the inertial matching measurement of hull deformation under the coexistence of time delay and large misalignment angle.Lar...In this paper,an improved spatio-temporal alignment measurement method is presented to address the inertial matching measurement of hull deformation under the coexistence of time delay and large misalignment angle.Large misalignment angle and time delay often occur simultaneously and bring great challenges to the accurate measurement of hull deformation in space and time.The proposed method utilizes coarse alignment with large misalignment angle and time delay estimation of inertial measurement unit modeling to establish a brand-new spatiotemporal aligned hull deformation measurement model.In addition,two-step loop control is designed to ensure the accurate description of dynamic deformation angle and static deformation angle by the time-space alignment method of hull deformation.The experiments illustrate that the proposed method can effectively measure the hull deformation angle when time delay and large misalignment angle coexist.展开更多
In the context of the recovery of agricultural waste, many researches have focused on the preparation of adsorbents from natural waste from fruit trees, egg shells, palm waste or sawdust. This work aims to optimize th...In the context of the recovery of agricultural waste, many researches have focused on the preparation of adsorbents from natural waste from fruit trees, egg shells, palm waste or sawdust. This work aims to optimize the preparation of a biosorbent from rubber hulls by studying its ability to adsorb small and medium molecules. The influence of parameters such as drying temperature (X1), particle size (X2), stirring time (X3) and sodium hypochloride mass (X4) was studied. The results indicate that the model used for biosorbent optimization on methylene blue and iodine index is significant. In addition, this model has greater adsorption capabilities on small molecules than with large molecules. Statistical analysis of the data shows that temperature is the most influential factor in the adsorption of small molecules. On the other hand, particle size has a significant influence on the adsorption of large molecules. The optimum biosorbent preparation values are 1.0 for drying temperature (X1), −1.0 for biosorbent grain size (X2), 1.0 for stirring time (X3) and 1.0 for sodium hypochloride mass (X4).展开更多
地理位置路由算法是指借助节点获得的地理位置信息进行无线传感网络中的路由发现与数据转发工作。本文提出一种基于Hull树的贪婪地理位置路由算法——Greedy Hull Tree Geographic Routing(GHTGR)。通过图形学中凸包的概念,在网络初始...地理位置路由算法是指借助节点获得的地理位置信息进行无线传感网络中的路由发现与数据转发工作。本文提出一种基于Hull树的贪婪地理位置路由算法——Greedy Hull Tree Geographic Routing(GHTGR)。通过图形学中凸包的概念,在网络初始阶段分布式地在各节点上建立Hull树以探查网络局部拓扑结构;同时在数据分组的路由转发阶段,通过Hull树内的搜索,寻找下一跳转发节点,完成数据分组的转发传输。通过仿真实验表明,与现有地理位置路由算法相比,该算法能够正确地寻找数据转发路径,有效地减少网络能耗,提高网络传输性能。展开更多
In order to discuss the localization application technology of cotton seedling using substrate, the author used cotton seed hulls after the production of edible fungi residue, river sand and peat in different proporti...In order to discuss the localization application technology of cotton seedling using substrate, the author used cotton seed hulls after the production of edible fungi residue, river sand and peat in different proportion formula using in field and laboratory cotton seedling test. The results showed that： dry mass per plant and leaf area per plant of formula 3 were higher than Jiangxi cotton seedling nurs- ery substrate.the higher proportion were 48.4% and 73.5%; the rate of forming plantlets, survival rate of transplant and the unginned cotton yield had no obvious difference with the other matrix seedling and transplanting; nursery substrate was returned using as fertilizer, reduced environment pollution, achieved comprehensive utilization and cyclic utilization. Cotton seed hulls after the production of edible fungi residue was a cotton seedling substrate material of saving work,reducing cost and protecting environment and would have a good application prospect.展开更多
Ice loads on a ship hull affect the safety of the hull structure and the ship maneuvering performance in ice-covered regions. A discrete element method （DEM） is used to simulate the interaction between drifting ice ...Ice loads on a ship hull affect the safety of the hull structure and the ship maneuvering performance in ice-covered regions. A discrete element method （DEM） is used to simulate the interaction between drifting ice floes and a moving ship. The pancake ice floes are modelled with three-dimensional （3-D） dilated disk elements considering the buoyancy, drag force and additional mass induced by the current. The ship hull is modelled with 3D disks with overlaps. Ice loads on the ship hull are determined through the contact detection between ice floe element and ship hull element and the contact force calculation. The influences of different ice conditions （current velocities and directions, ice thicknesses, concentrations and ice floe sizes） and ship speeds are also examined on the dynamic ice force. The simulated results are compared qualitatively well with the existing field data and other numerical results. This work can be helpful in the shil3 structure design and the navigation securitv in ice-covered fields.展开更多
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52071160 and 52071203)the 333-Key-Industry Talent Project of Jiangsu Scientific Committee(Grant No.JTO 2022-21).
文摘The water-drop-shaped pressure hull has a good streamline,which has good application prospect in the underwater observatory.Therefore,this study conducted analytical,experimental and numerical investigation of the buckling properties of water-drop-shaped pressure hulls under hydrostatic pressure.A water-drop experiment was conducted to design water-drop-shaped pressure hulls with various shape indices.The critical loads for the water-drop-shaped pressure hulls were resolved by using Mushtari’s formula.Several numerical simulations including linear buckling analysis and nonlinear buckling analysis including eigenmode imperfections were performed.The results indicated that the critical loads resolved by Mushtari's formula were in good agreement with the linear buckling loads from the numerical simulations.This formula can be extended to estimate the buckling capacity of water-drop-shaped pressure hulls.In addition,three groups of pressure hulls were fabricated by using stereolithography,a rapid prototyping technique.Subsequently,three groups of the pressure hulls were subjected to ultrasonic measurements,optical scanning,hydrostatic testing and numerical analysis.The experimental results were consistent with the numerical results.The results indicate that the sharp end of the water-drop-shaped pressure hulls exhibited instability compared with the blunt end.This paper provides a new solution to the limitations of experimental studies on the water-drop-shaped pressure hulls as well as a new configuration and evaluation method for underwater observatories.
基金supported by Beijing Insititute of Technology Research Fund Program for Young Scholars(2020X04104)。
文摘In this paper,an improved spatio-temporal alignment measurement method is presented to address the inertial matching measurement of hull deformation under the coexistence of time delay and large misalignment angle.Large misalignment angle and time delay often occur simultaneously and bring great challenges to the accurate measurement of hull deformation in space and time.The proposed method utilizes coarse alignment with large misalignment angle and time delay estimation of inertial measurement unit modeling to establish a brand-new spatiotemporal aligned hull deformation measurement model.In addition,two-step loop control is designed to ensure the accurate description of dynamic deformation angle and static deformation angle by the time-space alignment method of hull deformation.The experiments illustrate that the proposed method can effectively measure the hull deformation angle when time delay and large misalignment angle coexist.
文摘In the context of the recovery of agricultural waste, many researches have focused on the preparation of adsorbents from natural waste from fruit trees, egg shells, palm waste or sawdust. This work aims to optimize the preparation of a biosorbent from rubber hulls by studying its ability to adsorb small and medium molecules. The influence of parameters such as drying temperature (X1), particle size (X2), stirring time (X3) and sodium hypochloride mass (X4) was studied. The results indicate that the model used for biosorbent optimization on methylene blue and iodine index is significant. In addition, this model has greater adsorption capabilities on small molecules than with large molecules. Statistical analysis of the data shows that temperature is the most influential factor in the adsorption of small molecules. On the other hand, particle size has a significant influence on the adsorption of large molecules. The optimum biosorbent preparation values are 1.0 for drying temperature (X1), −1.0 for biosorbent grain size (X2), 1.0 for stirring time (X3) and 1.0 for sodium hypochloride mass (X4).
文摘地理位置路由算法是指借助节点获得的地理位置信息进行无线传感网络中的路由发现与数据转发工作。本文提出一种基于Hull树的贪婪地理位置路由算法——Greedy Hull Tree Geographic Routing(GHTGR)。通过图形学中凸包的概念,在网络初始阶段分布式地在各节点上建立Hull树以探查网络局部拓扑结构;同时在数据分组的路由转发阶段,通过Hull树内的搜索,寻找下一跳转发节点,完成数据分组的转发传输。通过仿真实验表明,与现有地理位置路由算法相比,该算法能够正确地寻找数据转发路径,有效地减少网络能耗,提高网络传输性能。
基金Supported by National Cotton Industry Technology System(CARS-18-36)National Key Project of Transgenosis(2011ZX08005-001)+1 种基金National 863 Project(2011AA10A10)National Science & Technology Support Program(2011BAD35B05-2)~~
文摘In order to discuss the localization application technology of cotton seedling using substrate, the author used cotton seed hulls after the production of edible fungi residue, river sand and peat in different proportion formula using in field and laboratory cotton seedling test. The results showed that： dry mass per plant and leaf area per plant of formula 3 were higher than Jiangxi cotton seedling nurs- ery substrate.the higher proportion were 48.4% and 73.5%; the rate of forming plantlets, survival rate of transplant and the unginned cotton yield had no obvious difference with the other matrix seedling and transplanting; nursery substrate was returned using as fertilizer, reduced environment pollution, achieved comprehensive utilization and cyclic utilization. Cotton seed hulls after the production of edible fungi residue was a cotton seedling substrate material of saving work,reducing cost and protecting environment and would have a good application prospect.
基金The Special Funding for National Marine Commonwealth Industry of China under contract Nos 201105016 and 2012418007the National Natural Science Foundation of China under contract No.41176012
文摘Ice loads on a ship hull affect the safety of the hull structure and the ship maneuvering performance in ice-covered regions. A discrete element method （DEM） is used to simulate the interaction between drifting ice floes and a moving ship. The pancake ice floes are modelled with three-dimensional （3-D） dilated disk elements considering the buoyancy, drag force and additional mass induced by the current. The ship hull is modelled with 3D disks with overlaps. Ice loads on the ship hull are determined through the contact detection between ice floe element and ship hull element and the contact force calculation. The influences of different ice conditions （current velocities and directions, ice thicknesses, concentrations and ice floe sizes） and ship speeds are also examined on the dynamic ice force. The simulated results are compared qualitatively well with the existing field data and other numerical results. This work can be helpful in the shil3 structure design and the navigation securitv in ice-covered fields.
