Ultrasmall NiS_(2)Nanocrystals Embedded in Ordered Macroporous Graphenic Carbon Matrix for Efficiently Pseudocapacitive Sodium Storage

Sodium-ion hybrid capacitor(SIHC)is one of the most promising alternatives for large-scale energy storage due to its high energy and power densities,natural abundance,and low cost.However,overcoming the imbalance between slow Na^(+)reaction kinetics of battery-type anodes and rapid ion adsorption/desorption of capacitive cathodes is a significant challenge.Here,we propose the high-rate-performance NiS_(2)@OMGC anode material composed of monodispersed NiS_(2) nanocrystals(8.8±1.7 nm in size)and N,S-co-doped graphenic carbon(GC).The NiS_(2)@OMGC material has a three-dimensionally ordered macroporous(3DOM)morphology,and numerous NiS_(2) nanocrystals are uniformly embedded in GC,forming a core-shell structure in the local area.Ultrafine NiS_(2) nanocrystals and their nano-microstructure demonstrate high pseudocapacitive Na-storage capability and thus excellent rate performance(355.7 mAh/g at 20.0 A/g).A SIHC device fabricated using NiS_(2)@OMGC and commercial activated carbon(AC)cathode exhibits ultrahigh energy densities(197.4 Wh/kg at 398.8 W/kg)and power densities(43.9 kW/kg at 41.3 Wh/kg),together with a long life span.This outcome exemplifies the rational architecture and composition design of this type of anode material.This strategy can be extended to the design and synthesis of a wide range of high-performance electrode materials for energy storage applications.

Synergistically boosting the elementary reactions over multiheterogeneous ordered macroporous Mo2C/NC-Ru for highly efficient alkaline hydrogen evolution

Simultaneously enhancing the reaction kinetics,mass transport,and gas release during alkaline hydrogen evolution reaction(HER)is critical to minimizing the reaction polarization resistance,but remains a big challenge.Through rational design of a hierarchical multiheterogeneous three-dimensionally(3D)ordered macroporous Mo_(2)C-embedded nitrogen-doped carbon with ultrafine Ru nanoclusters anchored on its surface(OMS Mo_(2)C/NC-Ru),we realize both electronic and morphologic engineering of the catalyst to maximize the electrocatalysis performance.The formed Ru-NC heterostructure shows regulative electronic states and optimized adsorption energy with the intermediate H*,and the Mo_(2)C-NC heterostructure accelerates the Volmer reaction due to the strong water dissociation ability as confirmed by theoretical calculations.Consequently,superior HER activity in alkaline solution with an extremely low overpotential of 15.5 mV at 10 mAcm^(−2)with the mass activity more than 17 times higher than that of the benchmark Pt/C,an ultrasmall Tafel slope of 22.7 mV dec−1,and excellent electrocatalytic durability were achieved,attributing to the enhanced mass transport and favorable gas release process endowed from the unique OMS Mo_(2)C/NC-Ru structure.By oxidizing OMS Mo_(2)C/NC-Ru into OMS MoO_(3)-RuO_(2)catalyst,it can also be applied as efficient oxygen evolution electrocatalyst,enabling the construction of a quasi-symmetric electrolyzer for overall water splitting.Such a device's performance surpassed the state-of-the-art Pt/C||RuO2 electrolyzer.This study provides instructive guidance for designing 3D-ordered macroporous multicomponent catalysts for efficient catalytic applications.

Three-dimensionally Ordered Macroporous Phosphotungstic Acid/SiO2 for Efficient Catalytic Oxidative Desulfurization

Three-dimensionally ordered（3DOM） macroporous phosphotungstic acid/SiO_2（HPW/SiO_2） materials were prepared by using colloidal crystal as templates and applied for oxidative desulfurization（ODS） of the model fuel oil. The obtained HPW/SiO_2 materials were characterized through scanning electron microscopy, powder X-ray diffraction, N_2 sorption, and Fourier transform infrared spectroscopy. The results indicated that 3 DOM HPW/SiO_2 possessed hierarchical pore architectures which contained ordered macropores and disordered mesopores, with the Keggin type HPW embedded in the framework of pore structure. The removal rate of dibenzothiophene（DBT） could reach 100% under the optimum conditions, moreover. The performance was only slightly decreased for the regenerated catalyst after 7 cycles.

Three-dimensionally ordered macroporous cross-linked polystyrene incorporating functional group via hydrophilic spacer arm

A versatile and effective method for incorporating functional groups on the pore wall of three-dimensionally ordered macroporous cross-linked polystyrene（3DOM CLPS） by hydrophilic spacer arm has been investigated.The 3DOM CLPS with pore size 865 nm was prepared by sacrifice template method.The hydrophilic spacer arm（polyethylene glycol,molecular weight is 600） was grafted to the 3DOM CLPS via nucleophilic substitution reaction.The other side of active hydroxyl can be further converted into a lot of other functional groups.In this report,the chelating ligand 2-mercaptobenzothiazole（MBZ） group was introduced on the end of the PGE chain to evidence the versatile functionalization approach.The functionalized ordered macroporous materials were characterized by FT-IR,element analyzer,SEM.The results reveal that the pores were successfully bonded with 2-mercaptobenzothiazole groups via hydrophilic spacer arms and the original morphology of ordered macroporous materials were remained after functionalization.The MBZ group density is 0.052 mmol/m^2.The functionalized 3DOM CLPS are expected to application as heavy metal ions adsorbent.

Pore-filling Three-dimensionally Ordered Macroporous Polyimide Composite Proton Conducting Membranes

The silica opal templates were prepared from three silica colloids of different diameters of 230 nm, 500 nm and 1.5 mm by a filtration route. The large-scale stable opal template membranes after sintering the deposited SiO2 opal template can be successfully obtained by optimizing the pH value and NaCl concentration in silica colloidal solutions. The three-dimensionally ordered macroporous（3DOM） polyimide membranes without crack were fabricated by reproducing the structure of silica opal template. We prepared the pore-filling composite proton exchange membranes by filling the 3DOM structure with proton conducting organosilane sol. The result indicates that the composite membranes exhibit higher water uptake than pure filling organosilane gel. The proton conductivity increased with the increasing of pore cell in composite membranes.

Enhanced hydrogen evolution performance by 3D ordered macroporous Ru-CoP@NC electrocatalysts

Electrocatalytic water splitting coupled with sustainable energies is identified as an environmentally friendly and renewable strategy to generate high-quality hydrogen for the fuel cells.However,the main challenge is to develop high performance,low cost and chemically stable electrocatalysts to decline the energy barriers and enhance the sluggish kinetics of hydrogen evolution reaction(HER).Herein,a three-dimensional hierarchically ordered macroporous Ru-CoP@NC electrocatalyst(3DOM Ru-CoP@NC)derived from ordered macro-microporous metal-organic frameworks has been prepared using the precursor@template and double-solvent methods.The prepared 3DOM Ru-CoP@NC catalyst exhibits an overpotential of 15 mV(j=10 mA·cm^(-2))and a reaction Tafel slope of 38 mV·dec^(-1)in alkaline electrolyte,which are superior to commercial Pt@C catalyst.Additionally,the overpotential and reaction Tafel slope of this catalyst in acidic media are 45 mV and 50 mV·dec^(-1),respectively.The outstanding HER activities of 3DOM Ru-CoP@NC catalysts are ascribed to the 3D highly interconnectedreticular nanospaces that can increase effective reaction active sites.The N dope d carbon framework improves the electronic properties and conductivity.Moreover,the strong interaction of Ru and CoP nanoparticles also boosts the HER process.These results indicate that 3DOM Ru-CoP@NC catalysts with high catalytic activities have a broad application prospect in the future.

3D ordered macroporous sulfur-doped g-C_(3)N_(4)/TiO_(2)S-scheme photocatalysts for efficient H_(2)O_(2)production in pure water

Photocatalytic hydrogen peroxide(H_(2)O_(2))production offers a clean and cost-efficient alternative to the traditional anthraquinone oxidation approach.Herein,a step-scheme(S-scheme)heterojunction photocat-alyst is fabricated by coupling TiO_(2)with three dimensionally ordered macroporous sulfur-doped graphitic carbon nitride(3DOM SCN/T)by electrostatic self-assembly.The optimized photocatalyst achieved a high photocatalytic H_(2)O_(2)production activity with a yield of 2128μmol h^(−1)g^(−1)without the addition of hole scavengers.The remarkable performance was attributed to the synergy between the 3DOM framework and the S-scheme heterojunction.The former enhances light harvesting and provides abundant active sites for surface reactions,while the latter promotes the spatial separation of photogenerated carriers and enhances the redox power.Finally,the mechanism of photocatalytic H_(2)O_(2)production over the 3DOM SCN/T S-scheme composite is proposed.This work provides novel insights into the development of effi-cient photocatalysts for H_(2)O_(2)production from water and O_(2).

Enhanced photocatalytic performance of Bi_(4)O_(5)Br_(2)with threedimensionally ordered macroporous structure for phenol removal

Herein,a series of three-dimensionally ordered macroporous(3DOM)Bi_(4)O_(5)Br_(2)photocatalysts with different macropore sizes were successfully fabricated via a polymethyl methacrylate(PMMA)template method.The photocatalytic activity for phenol degradation over 3DOM Bi_(4)O_(5)Br_(2)first increased and then decreased with the rise in macropore size.Specifically,3DOM Bi_(4)O_(5)Br_(2)-255(macropore diameter ca.170 nm)exhibits the best photocatalytic activity in the static system,which is about 4.5,7.3,and 11.9 times higher than those of bulk Bi_(4)O_(5)Br_(2),Bi_(2)WO_(6),and g-C_(3)N_(4),respectively.Meanwhile,high phenol conversion(75%)is also obtained over 3DOM Bi_(4)O_(5)Br_(2)-255 in the flow system under full spectrum irradiation.Furthermore,3DOM Bi_(4)O_(5)Br_(2)-255 also shows strong mineralization capacity owing to the downward shift of valance band position(0.15 V)as compared with Bi_(4)O_(5)Br_(2).Total organic carbon(TOC)removal rate over 3DOM Bi_(4)O_(5)Br_(2)-255(62%)is much higher than that of Bi_(4)O_(5)Br_(2)(17%).The enhancement in photocatalytic performance of 3DOM Bi_(4)O_(5)Br_(2)-255 is attributable to its better phenol adsorption,O_(2)activation,and charge separation and transfer abilities.This work combines the advantages of 3D structure and surface dangling bonds,providing new possibilities for designing highly efficient photocatalysts for pollutants removal.

Fabrication of Large-area 3-D Ordered Silvercoated Colloidal Crystals and Macroporous Silver Films Using Polystyrene Templates

The highly ordered silver-coated colloidal crystals arrays and macroporous silver films were derived through an electrostatics-induced adsorption effect using polystyrene(PS) as templates. Carboxyl-modified PS microspheres were prepared by emulsifier-free emulsion polymerization using methacrylic acid(MAA) as the functional monomer. PS microspheres were self-assembled into close packing colloidal crystals of facecentered cubic arrays to the substrate with vertical deposition method. These colloidal crystals were modified using dopamine(DA) to form poly-dopamine(PDA) during its oxidative polymerization. Through electrostatic interaction, the silver nanoparticles were deposited and adsorbed onto the surfaces of colloidal crystals templates by exposing [Ag(NH_3)_2]^+solution to infrared irradiation. Removal of the polymeric template by etching with methylbenzene solvent resulted in 3D ordered macroporous silver films. The structural and properties of the ordered silver-coated arrays and macroporous silver films were characterized by field emission scanning electron microscopy(FE-SEM), X-ray diffraction(XRD), UV-vis spectroscopy and surface-enhanced Raman spectroscopy(SERS). The results indicate that the prepared silver-coated arrays and macroporous silver films possess the features of ordered multilayer arrangement, uniformity and repeatability as well as an ideal SERS effect.

SOME KEY ORDERED MACROPOROUS COMPOSITES

This review summarizes recent progress of the ordered macroporous composites with the opals and inverse opal structure. Synthesis and performance of the composites are emphasized. Composition of the ordered composites is tunable ranging within metal, metal alloy, metal oxide, polymer, carbon and hydrogel. The ordered structure gives brilliant color effects, which is useful for sensors and photonic crystals. The interconnected macroporous structure provides easiness for mass transportation and species culturing.

Color tunable upconversion emission in CeO_2:Yb,Er three-dimensional ordered macroporous materials

The three-dimensional ordered macroporous CeO2：Yb,Er materials were prepared, and the influence of doping concentra- tion of Yb3＋ or Er3＋ ions on upconversion property was investigated. Green and red upconversion emissions were observed under the excitation of 980 nm at room temperature. It was found that the ratio of red to green upconversion emission intensity increased with increasing of concentration of the Yb3＋ or Er3＋ ions in the three-dimensional ordered macroporous CeO2：Yb,Er materials. When the concentration of Yb3＋ was 10 mol%, pure red upconversion emission was obtained. The varied mechanism of ratio of red to green upconversion emission intensity was discussed with the concentration of Yb3＋ or Er3＋ ions.

Superior performance in visible-light-driven hydrogen evolution reaction of three-dimensionally ordered macroporous SrTiO_(3) decorated with Zn_(x)Cd_(1−x)S

It is of broad interest to develop emerging photocatalysts with excellent light-harvesting capacity and high charge carrier separation efficiency for visible light photocatalytic hydrogen evolution reaction.However,achieving satisfying hydrogen evolution efficiency under noble metal-free conditions remains challenging.In this study,we demonstrate the fabrication of three-dimensionally ordered macroporous SrTiO_(3)decorated with Zn_(x)Cd_(1−x)S nanoparticles for hydrogen production under visible light irradiation(λ>420 nm).Synergetic enhancement of photocatalytic activity is achieved by the slow photon effect and improved separation efficiency of photogenerated charge carriers.The obtained composites could afford very high hydrogen production efficiencies up to 19.67 mmol·g^(−1)·h^(−1),with an apparent quantum efficiency of 35.9%at 420 nm,which is 4.2 and 23.9 times higher than those of pure Zn_(0.5)Cd_(0.5)S(4.67 mmol·g^(−1)·h^(−1))and CdS(0.82 mmol·g^(−1)·h^(−1)),respectively.In particular,under Pt-free conditions,an attractive hydrogen production rate(3.23 mmol·g^(−1)·h^(−1))was achieved,providing a low-cost and high-efficiency strategy to produce hydrogen from water splitting.Moreover,the composites showed excellent stability,and no obvious loss in activity was observed after five cycling tests.

Immobilization of Glucose Oxidase on Ordered Macroporous Silicas Functionalized with Amino Group

A novel glucose oxidase immobilized on three-dimensionally ordered macroporous （3DOM） material has been prepared by firstly preparation of hybrid 3DOM SiO2-NH2 materials using colloidal crystal method, and following covalent immobilization of glucose oxidase on the pore walls of the 3DOM materials. The materials were characterized by SEM, FTIR, DSC and BET techniques. SEM observation shows that the macropores are highly ordered and are interconnected by small windows. FTIR measurement shows that there are amino and organic groups in the pore walls. The surface area of the 3DOM SiO2-NH2 material is about 10.2 m2/g. The loaded amount of enzyme is increased with amino content in the materials. The immobilized enzyme has high activity, thermal stability and can be reused.

INVERSE OPALINE STRUCTURE TITANIA PHOTONIC CRYSTALS BY FUNCTIONALLY MODIFIED COLLOIDAL CRYSTALS TEMPLATING

Ordered macroporous titania photonic crystals （PCs） and photonic balls were fabricated by functional modified polymer colloidal crystals. The TiO2 PCs and balls formed through this method exhibit no cracks and lacunae in large areas on their surface and their inner structures.

MESO-STRUCTURED POLYMERIC HYDROGELS

Meso-structured (opal and inverse opal) polymeric hydrogels of varied morphology and composition wereprepared by using two methods: post-modification of the template-synthesized structured polymers and template-polymerization of functional monomers. A polyacrylic acid based inverse opal hydrogel was chosen to demonstrate its fastpH response by changing color, which is important in designing tunable photonic crystals. Template effects of the hydrogelson controlling structure of the template-synthesized inorganic materials were discussed. The catalytic effect of acid groups inthe templates was emphasized for a preferential formation of TiO_2 in the region containing acid groups, which allowedduplicating inorganic colloidal crytals from colloidal crystal hydrogels (or macroporous products from macroporoushydrogels) via one step duplication.

Effect of calcination process on performance of 3DOM CeMnO3 catalysts

A series of 3DOM CeMnO3 perovskite catalysts were prepared by poly(methyl methacrylate)hardtemplating-excessive impregnation method at calcination temperature of x℃(x=600,700,800)and the heating rate of y℃/min(y=1,2,5,10).The samples were characterized by Brunauer-Emmett-Teller method,scanning electron microscopy,transmission electron microscopy,H2-temperature programmed reduction,X-ray photoelectron spectroscopy,X-ray diffraction,moreover,the effect of the calcination process on the catalytic activity of the samples were discussed by the catalytic combustion of toluene.The results show that the 3DOM CeMnO3 catalysts calcined at 600℃promote the formation of a perovskite structure,inhibit the reduction of the Mn4+species in the catalyst with high temperature.The catalyst expresses the complete macroporous structure,large specific surface area(38.8 m^(2)/g),higher adsorption oxygen concentration and Mn4+substance concentration,with a low T90%=172℃.By preparing the catalysts at different calcination heating rates,it can be concluded that the catalyst possesses a high concentration of adsorbed oxygen and a low reduction temperature and a large specific surface area(40.42 m^(2)/g)greatly promotes adsorption stage catalytic oxidation reaction and catalytic combustion of toluene at low temperature under the heating rate of 5℃/min.When the heating rate is 1℃/min,the catalyst has a complete macroporous structure(>250 nm),which is beneficial to the exchange of macromolecular substances during the catalytic reaction and the catalyst has a high concentration of lattice oxygen suitable for the catalysis of toluene in high temperature flue gas combustion.