Development characteristics and controlling factors of fractures in lacustrine shale and their geological significance for evaluating shale oil sweet spots in the third member of the Shahejie Formation in the Qikou Sag, Bohai Bay Basin

Natural fractures are critical for shale oil and gas enrichment and development. Due to the extremely high heterogeneity of shale, the factors controlling the formation of internal fractures, especially horizontal fractures, remain controversial. In this study, we integrate thin section analysis and microcomputed tomography(CT) data from several lacustrine shale samples from the third member(Es3) of the Shahejie Formation, Qikou Sag, Bohai Bay Basin, to assess the fractures in detail. The goal is to reveal the development characteristics, controlling factors, and geological significance for evaluating sweet spots in a shale oil play. The fractures in the Es3contain high-angle structural and horizontal bed-parallel fractures that are mostly shear and extensional. Various factors influence fracture development,including lithofacies, mineral composition, organic matter content, and the number of laminae. Structural fractures occur predominantly in siltstone, whereas bed-parallel fractures are abundant in laminated shale and layered mudstone. A higher quartz content results in higher shale brittleness, causing fractures, whereas the transformation between clay minerals contributes to the development of bedparallel fractures. Excess pore pressure due to hydrocarbon generation and expulsion during thermal advance can cause the formation of bed-parallel fractures. The density of the bed-parallel and structural fractures increases with the lamina density, and the bed-parallel fractures are more sensitive to the number of laminae. The fractures are critical storage spaces and flow conduits and are indicative of sweet spots. The laminated shale in the Es3with a high organic matter content contains natural fractures and is an organic-rich, liquid-rich, self-sourced shale play. Conversely, the siltstone, massive mudstone, and argillaceous carbonate lithofacies contain lower amounts of organic matter and do not have bed-parallel fractures. However, good reservoirs can form in these areas when structural fractures are present and the source, and storage spaces are separated.

Main controlling factor and mechanism of gas-in-place content of the Lower Cambrian shale from different sedimentary facies in the western Hubei area, South China

The Lower Cambrian shale gas in the western Hubei area,South China has a great resource prospect,but the gas-in-place(GIP)content in different sedimentary facies varies widely,and the relevant mechanism has been not well understood.In the present study,two sets of the Lower Cambrian shale samples from the Wells YD4 and YD5 in the western Hubei area,representing the deep-water shelf facies and shallowwater platform facies,respectively,were investigated on the differences of pore types,pore structure and methane adsorption capacity between them,and the main controlling factor and mechanism of their methane adsorption capacities and GIP contents were discussed.The results show that the organic matter(OM)pores in the YD4 shale samples are dominant,while the inorganic mineral(IM)pores in the YD5 shale samples are primary,with underdeveloped OM pores.The pore specific surface area(SSA)and pore volume(PV)of the YD4 shale samples are mainly from micropores and mesopores,respectively,while those of the YD5 shale samples are mainly from micropores and macropores,respectively.The methane adsorption capacity of the YD4 shale samples is significantly higher than that of the YD5 shale samples,with a maximum absolute adsorption capacity of 3.13 cm^(3)/g and 1.31 cm^(3)/g in average,respectively.Compared with the shallow-water platform shale,the deep-water shelf shale has a higher TOC content,a better kerogen type and more developed OM pores,which is the main mechanism for its higher adsorption capacity.The GIP content models based on two samples with a similar TOC content selected respectively from the Wells YD4 and YD5 further indicate that the GIP content of the deep-water shelf shale is mainly 34 m^(3)/t within a depth range of 1000—4000 m,with shale gas exploration and development potential,while the shallow-water platform shale has normally a GIP content of<1 m^(3)/t,with little shale gas potential.Considering the geological and geochemical conditions of shale gas formation and preservation,the deep-water shelf facies is the most favorable target for the Lower Cambrian shale gas exploration and development in the western Hubei area,South China.

Enrichment model and major controlling factors of below-source tight oil in Lower Cretaceous Fuyu reservoirs in northern Songliao Basin,NE China

Based on the geochemical,seismic,logging and drilling data,the Fuyu reservoirs of the Lower Cretaceous Quantou Formation in northern Songliao Basin are systematically studied in terms of the geological characteristics,the tight oil enrichment model and its major controlling factors.First,the Quantou Formation is overlaid by high-quality source rocks of the Upper Cretaceous Qingshankou Formation,with the development of nose structure around sag and the broad and continuous distribution of sand bodies.The reservoirs are tight on the whole.Second,the configuration of multiple elements,such as high-quality source rocks,reservoir rocks,fault,overpressure and structure,controls the tight oil enrichment in the Fuyu reservoirs.The source-reservoir combination controls the tight oil distribution pattern.The pressure difference between source and reservoir drives the charging of tight oil.The fault-sandbody transport system determines the migration and accumulation of oil and gas.The positive structure is the favorable place for tight oil enrichment,and the fault-horst zone is the key part of syncline area for tight oil exploration.Third,based on the source-reservoir relationship,transport mode,accumulation dynamics and other elements,three tight oil enrichment models are recognized in the Fuyu reservoirs:(1)vertical or lateral migration of hydrocarbon from source rocks to adjacent reservoir rocks,that is,driven by overpressure,hydrocarbon generated is migrated vertically or laterally to and accumulates in the adjacent reservoir rocks;(2)transport of hydrocarbon through faults between separated source and reservoirs,that is,driven by overpressure,hydrocarbon migrates downward through faults to the sandbodies that are separated from the source rocks;and(3)migration of hydrocarbon through faults and sandbodies between separated source and reservoirs,that is,driven by overpressure,hydrocarbon migrates downwards through faults to the reservoir rocks that are separated from the source rocks,and then migrates laterally through sandbodies.Fourth,the differences in oil source conditions,charging drive,fault distribution,sandbody and reservoir physical properties cause the differential enrichment of tight oil in the Fuyu reservoirs.Comprehensive analysis suggests that the Fuyu reservoir in the Qijia-Gulong Sag has good conditions for tight oil enrichment and has been less explored,and it is an important new zone for tight oil exploration in the future.

Wellbore-heat-transfer-model-based optimization and control for cooling downhole drilling fluid

To address the two critical issues of evaluating the necessity of implementing cooling techniques and achieving real-time temperature control of drilling fluids underground in the current drilling fluid cooling technology,we first established a temperature and pressure coupled downhole heat transfer model,which can be used in both water-based and oil-based drilling fluid.Then,fourteen factors,which could affect wellbore temperature,were analyzed.Based on the standard deviation of the downhole temperature corresponding to each influencing factor,the influence of each factor was quantified.The influencing factors that can be used to guide the drilling fluid's cooling technology were drilling fluid thermal conductivity,drilling fluid heat capacity,drilling fluid density,drill strings rotation speed,pump rate,viscosity,ROP,and injection temperature.The nondominated sorting genetic algorithm was used to optimize these six parameters,but the optimization process took 182 min.Combining these eight parameters'influence rules with the nondominated sorting genetic algorithm can reduce the optimization time to 108 s.Theoretically,the downhole temperature has been demonstrated to increase with the inlet temperature increasing linearly under quasi-steady states.Combining this law and PID,the downhole temperature can be controlled,which can reduce the energy for cooling the surface drilling fluid and can ensure the downhole temperature reaches the set value as soon as possible.

Associated Factors to Poor Blood Pressure Control in Hypertensives Followed Up at the Campus University Hospital of Lome (Togo)

Introduction: Hypertension is a real public health issue and its control is very difficult. We aim to determine the frequency of uncontrolled hypertension in hypertensive patients followed up as an outpatient at the campus university hospital of Lome (Togo) and to search for the associated factors. Methodology: The study was cross-sectional, descriptive and analytical, carried out from February (2022) to August 2022 in 260 hypertensive patients aged 22 years old, followed up (on an) as an outpatient for at least 3 months at the Lome University Hospital campus. A univariate then multivariate analysis were conducted in order to highlight the most common factors significantly linked to uncontrolled. Results: The mean age of hypertensives was 56.4 ± 12.7 years, the sex ratio (M/F) was 0.59. Prevalence of uncontrolled blood pressure was 42%. Associated Factors to poor blood pressure control in our study were age > 60 years (OR = 1.6 CI [1.17 - 2.50]), low socio-economic level (OR = 2.2 CI [1.96 - 4.33]), high cardiovascular risk level (OR = 3.1 CI [2.18 - 4.52]), non-adherence to regular blood pressure monitoring (OR = 3.3 CI [2.21 - 5.55]), low compliance to treatment (OR = 4.1 CI [2.33 - 6.76]) and a chronic renal failure (OR = 2.1 CI [1.21 - 3.10]). Conclusion: Nearly half of the hypertensives in our study had poorly controlled blood pressure by antihypertensive treatment medication. The factors of this poor control were age > 60 years, low socio-economic level, high or very high level of cardiovascular risk, low compliance to treatment, and renal failure.

Failure evaluation and control factor analysis of slope block instability along traffic corridor in Southeastern Tibet

The instability of slope blocks occurred frequently along traffic corridor in Southeastern Tibet(TCST),which was primarily controlled by the rock mass structures.A rapid method evaluating the control effects of rock mass structures was proposed through field statistics of the slopes and rock mass structures along TCST,which combined the stereographic projection method,modified M-JCS model,and limit equilibrium theory.The instabilities of slope blocks along TCST were then evaluated rapidly,and the different control factors of instability were analyzed.Results showed that the probabilities of toppling(5.31%),planar(16.15%),and wedge(35.37%)failure of slope blocks along TCST increased sequentially.These instability modes were respectively controlled by the anti-dip joint,the joint parallel to slope surface with a dip angle smaller than the slope angle(singlejoint),and two groups of joints inclined out of the slope(double-joints).Regarding the control effects on slope block instability,the stabilization ability of doublejoints(72.7%),anti-dip joint(67.4%),and single-joint(57.6%)decreased sequentially,resulting in different probabilities of slope block instability.Additionally,nearby regional faults significantly influenced the joints,leading to spatial heterogeneity and segmental clustering in the stabilization ability provided by joints to the slope blocks.Consequently,the stability of slope blocks gradually weakened as they approached the fault zones.This paper can provide guidance and assistance for investigating the development characteristics of rock mass structures and the stability of slope blocks.

A comparative study of the main factors controlling geohazards induced by 10 strong earthquakes in Western China since the Wenchuan earthquake in 2008

Determining the main controlling factors of earthquake-triggered geohazards is a prerequisite for studying earthquake geohazards and post-disaster emergency response.By studying these factors,the geomorphic and geological factors controlling the nature,condition,and distribution of earthquake-induced geohazards can be analyzed.Such insights facilitate earthquake disaster prediction and emergency response planning.The authors combined field investigations and spatial data analysis to examine geohazards induced by seismic events,examining ten earthquakes including the Wenchuan,Yushu,Lushan events,to elucidate the main control factors of seismic geohazard.The authors observed that seismic geohazard occurrence is usually affected by many factors,among which active nature of the seismogenic fault,seismic peak ground acceleration(PGA),topographic slope and geomorphic height differences,and distance from the fault zone and river system are the most important.Compared with strike-slip earthquakes,thrust earthquakes induce more high-altitude and high-speed remote landslides,which can cause great harm.Slopes of 0°–40°are prone to secondary seismic geohazards,which are mainly concentrated 0–6 km from the river system.Secondary geohazards are not only related to seismogenic fault but also influenced by the associated faults in the earthquake area.The maximum seismic PGA and secondary seismic geohazard number are positively correlated,and the horizontal and vertical ground motions play leading and promoting roles in secondary geohazard formation,respectively.Through the research,the spatial distribution of seismic geohazards is predicted,providing a basis for the formulation of emergency response plans following disasters.

Controlling factors and models of shale oil enrichment in Lower Permian Fengcheng Formation,Mahu Sag,Junggar Basin,NW China

Based on the combination of core observation,experimental analysis and testingand geological analysis,the main controlling factors of shale oil enrichment in the Lower Permian Fengcheng Formation in the Mahu Sag of the Junggar Basin are clarified,and a shale oil enrichment model is established.The results show that the enrichment of shale oil in the Fengcheng Formation in the Mahu Sag is controlled by the organic abundance,organic type,reservoir capacity and the amount of migration hydrocarbon in shale.The abundance of organic matter provides the material basis for shale oil enrichment,and the shales containing typesⅠandⅡorganic matters have good oil content.The reservoir capacity controls shale oil enrichment.Macropores are the main space for shale oil enrichment in the Fengcheng Formation,and pore size and fracture scale directly control the degree of shale oil enrichment.The migration of hydrocarbons in shale affects shale oil enrichment.The shale that has expelled hydrocarbons has poor oil content,while the shale that has received hydrocarbons migrated from other strata has good oil content.Lithofacies reflect the hydrocarbon generation and storage capacity comprehensively.The laminated felsic shale,laminated lime-dolomitic shale and thick-layered felsic shale have good oil content,and they are favorable lithofacies for shale oil enrichment.Under the control of these factors,relative migration of hydrocarbons occurred within the Fengcheng shale,which leads to the the difference in the enrichment process of shale oil.Accordingly,the enrichment mode of shale oil in Fengcheng Formation is established as"in-situ enrichment"and"migration enrichment".By superimposing favorable lithofacies and main controlling factors of enrichment,the sweet spot of shale oil in the Fengcheng Formation can be selected which has great significance for the exploration and development of shale oil.

Crude oil cracking in deep reservoirs:A review of the controlling factors and estimation methods

The natural cracking of crude oils in deep reservoirs has gained great interest due to continuously increasing depth of petroleum exploration and exploitation.Complex oil compositions and surroundings as well as complicated geological evolutions make oil cracking in nature much more complex than industrial pyrolysis.So far,numerous studies,focused on this topic,have made considerable progress although there still exist some drawbacks.However,a comprehensive review on crude oil cracking is yet to be conducted.This article systematically reviews the controlling factors of oil cracking from six aspects,namely,oil compositions,temperature and time,pressure,water,minerals and solid organic matter.We compare previous experimental and modelling results and present new field cases.In the following,we evaluate the prevailing estimation methods for the extent of oil cracking,and elucidate other factors that may interfere with the application of these estimation methods.This review will be helpful for further investigations of crude oil cracking and provides a guide for estimation of the cracking extent of crude oils.

Hybrid Multi-Infeed Interaction Factor Calculation Method Considering Voltage Regulation Control Characteristics of Voltage Source Converter

Voltage source converter based high voltage direct current(VSC-HVDC)can participate in voltage regulation by flexible control to help maintain the voltage stability of the power grid.In order to quantitatively evaluate its influence on the voltage interaction between VSC-HVDC and line commutated converter based high voltage direct current(LCC-HVDC),this paper proposes a hybrid multi-infeed interaction factor(HMIIF)calculation method considering the voltage regulation control characteristics of VSC-HVDC.Firstly,for a hybrid multi-infeed high voltage direct current system,an additional equivalent operating admittance matrix is constructed to characterize HVDC equipment characteristics under small disturbance.Secondly,based on the characteristic curve between the reactive power and the voltage of a certain VSC-HVDC project,the additional equivalent operating admittance of VSC-HVDC is derived.The additional equivalent operating admittance matrix calculation method is proposed.Thirdly,the equivalent bus impedance matrix is obtained by modifying the alternating current(AC)system admittance matrix with the additional equivalent operating admittance matrix.On this basis,the HMIIF calculation method based on the equivalent bus impedance ratio is proposed.Finally,the effectiveness of the proposed method is verified in a hybrid dual-infeed high voltage direct current system constructed in Power Systems Computer Aided Design(PSCAD),and the influence of voltage regulation control on HMIIF is analyzed.

Behavior and controlling factors of methane adsorption in Jurassic continental shale,northeastern Sichuan Basin

The behavior and controlling factors of natural gas adsorption in the Jurassic continental shale in the northeastern Sichuan Basin are studied based on the organic geochemical features,mineral compositions and pore structure parameters through a series of experiments on samples from the shale.Results show that the total gas content of the shale measured on-site is 0.1-5.3 cm^(3)/g,with an average of 0.7 cm^(3)/g.The methane isothermal adsorption curves show a trend of increasing first and then decreasing,indicating an obvious excessive adsorption.The shale has a maximum adsorption capacity(V^(L))of 0.44-3.59 cm^(3)/g,with an average of 1.64 cm^(3)/g,lower than that of marine shale in the same basin.The organic matter content and pore structure characteristics are identified as the two main factors controlling the adsorption capacity of the shale.Micropores in the shale are the main storage space for gas to be adsorbed.Due to well developed shell laminae and interlayers in the shale,calcite plays a more important role than clay minerals in affecting the adsorption of gas to the rock.The formation temperature and water content also significantly inhibit the gas adsorption to the shale.Compared with marine shale in the basin,the Jurassic continental shale is more heterogeneous and lower in TOC values.Furthermore,with a more widely developed clayey shale lithofacies and shell limy shale lithofacies as well as relatively less developed organic pores and micropores,the continental shale is inferior to marine shale in terms of gas adsorption capacity.

Baoziwan-Majiashan Area of Jiyuan Oilfield Analysis of Reservoir Characteristics and Main Control Factors in Long 4 5 Section

Based on the sheet, scanning electron microscope and high pressure mercury analysis method, this paper takes Jiyuan oilfield-Ma Jia mountain district 4 5 sandstone reservoir as the research object, from the reservoir petrology, pore type and porosity, permeability, the system analyzed the reservoir characteristics and its control factors. The results show that the sandstone in the 4 5 section of Baoziwan-Majiashan area of Jiyuan oilfield is fine in size and high in filling content. The pore types were dominated by intergranular pores and dissolved pores, with a low face rate. The reservoir property is relatively poor, with mean porosity of 11.11% and mean permeability of 1.16 × 10−3 µm2. In the low porous, low otonic background, the development of relatively high pore hypertonic areas. Compaction and cementation should play a destructive role in reservoir properties, and dissolution should play a positive role in reservoir properties. Compaction adjusts the migration of clay minerals and miscellaneous bases in the original sediment in the study area, greatly reducing the porosity and permeability of the reservoir;the development of the cement cement, carbonate cementation and some quartz secondary compounds reduces the storage space;the dissolution effect, especially the secondary dissolution pores of the reservoir, which obviously improves the properties of the reservoir.

Study on Influencing Factors and Control Points of Design Estimate of Landscaping Engineering

In recent years,China’s landscaping projects have developed vigorously,and the growth rate of urban garden green space areas has been maintained at about 5%.Overall,with the development of the national economy and the support of macro policies,people’s demand for close to nature and beautify the environment is gradually increasing,which has brought new growth momentum for the development of the landscaping industry.Simultaneously,from the perspective of future economic development and urban development,the landscaping industry still has a lot of room for development.However,with the rapid development of landscape engineering,the problem of cost control of landscape engineering is becoming more prominent,the phenomenon of budget overestimation is common,and there are many factors affecting the cost of landscape engineering,which brings difficulties and challenges to the analysis of its influencing factors and cost management.How to scientifically analyze the influencing factors and control the cost has become an important link in the landscaping project.To solve the above problems,this paper takes the design stage of landscaping engineering as the background,takes the design estimate of landscaping engineering as the research object,through literature research and data collection,fully excavates the main influencing factors of the design estimate stage of landscaping engineering,analyzes the key points of cost control,and provides reference ideas and directions for the later cost management and control.

Distribution Characteristics and Controlling Factors of Heavy Metals in Surface Sediments from the Bay-Island-Estuary System(BIES):A Case Study in Coastal Waters of Fujian Province,China

Based on the contents of six heavy metal elements in surface sediments from coastal areas of Fujian Province,the distribution characteristics and controlling factors of six heavy metals in a bay-island-estuary system(BIES)were studied.This paper focuses on the influence of the hydrodynamic environment,and systematically discusses how grain size compositions,chemical environment,tidal current,ocean circulation and human activities influence the distribution and transportation of the heavy metals.The results indicated that the distribution and migration of Cu,Pb,Zn and Cr elements were mainly controlled by natural factors such as regional geological background,grain size compositions,and tidal residual currents.In contrast,As and Hg was mainly affected by human factors such as agriculture and industrial manufacturing.In the BIES,where the chemical environment exerted limited influence,the accumulation and migration of heavy metals are mainly influenced by human activities and enhanced by estuary processes as well as the complex sedimentary dynamic environment caused by many bays and islands.

Factors Controlling Organic Matter Enrichment in Alkaline Lacustrine Source Rocks:A Case Study of the Late Paleozoic Fengcheng Formation in the Junggar Basin,NW China

The late Paleozoic Fengcheng Formation shale(LPF shale)in the Junggar Basin,NW China,is the oldest alkaline source rock discovered in the world,providing a unique perspective with which to explore organic matter(OM)enrichment in alkaline lake environments.Combined with the organic carbon isotope profile and paleoenvironmental proxies,this study reveals that the LPF shale was deposited in an arid climate with high salinity and a strong reducing environment,accompanied by frequent volcanic activity.High TOC values are concentrated in two intervals with frequent fluctuations in OM types.A negative excursion due to changes in sedimentary OM source is found in the δ^(13)C_(org) profile.The excursion corresponds to the OM enrichment interval and is accompanied by abnormally high values of Sr/Ba and Sr/Cu.This implies that the extreme arid climate has led to high salinity,resulting in strong reducibility and changes in paleontological assemblages,which in turn controlled the differential enrichment of OM.The Fengcheng Fm.high-quality source rocks are the result of the combined action of climatic events,volcanism,high-salinity water environment and superior hydrocarbon-generating organisms.The results provide new insights into the formation conditions of terrestrial alkaline high-quality source rocks and the factors controlling alkaline OM enrichment.

Spatial-Temporal Distribution, Geological Characteristics and Ore-Formation Controlling Factors of Major Types of Rare Metal Mineral Deposits in China

Rare metals including Lithium(Li),Beryllium(Be),Rubidium(Rb),Cesium(Cs),Zirconium(Zr),Hafnium(Hf),Niobium(Nb),Tantalum(Ta),Tungsten(W)and Tin(Sn)are important critical mineral resources.In China,rare metal mineral deposits are spatially distributed mainly in the Altay and Southern Great Xingán Range regions in the Central Asian orogenic belt;in the Middle Qilian,South Qinling and East Qinling mountains regions in the Qilian-Qinling-Dabie orogenic belt;in the Western Sichuan and Bailongshan-Dahongliutan regions in the Kunlun-Songpan-Garze orogenic belt,and in the Northeastern Jiangxi,Northwestern Jiangxi,and Southern Hunan regions in South China.Major ore-forming epochs include Indosinian(mostly 200-240 Ma,in particular in western China)and the Yanshanian(mostly 120-160 Ma,in particular in South China).In addition,Bayan Obo,Inner Mongolia,northeastern China,with a complex formation history,hosts the largest REE and Nb deposits in China.There are six major rare metal mineral deposit types in China:Highly fractionated granite;Pegmatite;Alkaline granite;Carbonatite and alkaline rock;Volcanic;and Hydrothermal types.Two further types,namely the Leptynite type and Breccia pipe type,have recently been discovered in China,and are represented by the Yushishan Nb-Ta-(Zr-Hf-REE)and the Weilasituo Li-Rb-Sn-W-Zn-Pb deposits.Several most important controlling factors for rare metal mineral deposits are discussed,including geochemical behaviors and sources of the rare metals,highly evolved magmatic fractionation,and structural controls such as the metamorphic core complex setting,with a revised conceptual model for the latter.

Controlling Factors of Organic Nanopore Development: A Case Study on Marine Shale in the Middle and Upper Yangtze Region, South China

The Upper Ordovician Wufeng-Lower Silurian Longmaxi and the Lower Cambrian Qiongzhusi shales are the major targets for shale gas exploration and development in China.Although the two organic-rich shales share similar distribution ranges and thicknesses,they exhibit substantially different exploration and development results.This work analyzed the nanopore structures of the shale reservoirs in this region.Pore development of 51 shale samples collected from various formations and locations was compared using the petromineralogical,geochemical,structural geological and reservoir geological methods.The results indicate that the reservoir space in these shales is dominated by organic pores and the total pore volume of micropores,mesopores,macropores in different tectonic areas and formations show different trends with the increase of TOC.It is suggested that organic pores of shale can be well preserved in areas with simple structure and suitable preservation conditions,and the shale with smaller maximum ancient burial depth and later hydrocarbongeneration-end-time is also more conducive to pore preservation.Organic pore evolution models are established,and they are as follows:①Organic matter pore development stage,②Early stage of organic matter pore destruction,and③late stage of organic matter pore destruction.The areas conducive to pore development are favorable for shale gas development.Research results can effectively guide the optimization and evaluation of favorable areas of shale gas.

Diurnal and Seasonal Variations of CO2Fluxes and Their Climate Controlling Factors for a Subtropical Forest in Ningxiang

In this study, the diurnal and seasonal variations of CO2 fluxes in a subtropical mixed evergreen forest in Ningxiang of Hunan Province, part of the East Asian monsoon region, were quantified for the first time. The fluxes were based on eddy covariance measurements from a newly initiated flux tower. The relationship between the CO2 fluxes and climate factors was also analyzed. The results showed that the target ecosystem appeared to be a clear carbon sink in 2013, with integrated net ecosystem CO2exchange（NEE）, ecosystem respiration（RE）, and gross ecosystem productivity（GEP） of-428.8, 1534.8 and1963.6 g C m^-2yr^-1, respectively. The net carbon uptake（i.e. the-NEE）, RE and GEP showed obvious seasonal variability,and were lower in winter and under drought conditions and higher in the growing season. The minimum NEE occurred on12 June（-7.4 g C m^-2d^-1）, due mainly to strong radiation, adequate moisture, and moderate temperature; while a very low net CO2 uptake occurred in August（9 g C m^-2month^-1）, attributable to extreme summer drought. In addition, the NEE and GEP showed obvious diurnal variability that changed with the seasons. In winter, solar radiation and temperature were the main controlling factors for GEP, while the soil water content and vapor pressure deficit were the controlling factors in summer. Furthermore, the daytime NEE was mainly limited by the water-stress effect under dry and warm atmospheric conditions, rather than by the direct temperature-stress effect.

Quantitative analysis of geological ore-controlling factors and stereoscopic quantitative prediction of concealed ore bodies

To address the issues for assessing and prospecting the replaceable resource of crisis mines, a geological ore-controlling field model and a mineralization distribution field model were proposed from the viewpoint of field analysis. By dint of solving the field models through transferring the continuous models into the discrete ones, the relationship between the geological ore-controlling effect field and the mineralization distribution field was analyzed, and the quantitative and located parameters were extracted for describing the geological factors controlling mineralization enrichment. The method was applied to the 3-dimensional localization and quantitative prediction for concealed ore bodies in the depths and margins of the Daehang mine in Guangxi, China, and the 3-dimensional distribution models of mineralization indexes and ore-controlling factors such as magmatic rocks, strata, faults, lithology and folds were built. With the methods of statistical analysis and the non-linear programming, the quantitative index set of the geological ore-controlling factors was obtained. In addition, the stereoscopic located and quantitative prediction models were set up by exploring the relationship between the mineralization indexes and the geological ore-controlling factors. So far, some concealed ore bodies with the resource volume of a medium-sized mineral deposit are found in the deep parts of the Dachang Mine by means of the deep prospecting drills following the prediction results, from which the effectiveness of the predication models and results is proved.

Geological Characteristics and Ore-controlling Factors of the Beiya Gold–Polymetallic Ore Deposit, Northwestern Yunnan Province

Based on comprehensive petrological, geochronological, and geochemical studies, this study analyzed the relationships between the Beiya gold-polymetallic skarn deposit and quartz syenite porphyries, and discussed the source（s） and evolution of magmas. Our results suggest that syenite porphyries（i.e. the Wandongshan, the Dashadi, and the Hongnitang porphyries）, which formed between the Eocene and the early Oligocene epochs, are the sources for the gold-polymetallic ores at the Beiya deposit. Carbonate rocks（T2 b） of the Triassic Beiya Formation in the ore district provide favorable host space for deposit formation. Fold and fault structures collectively play an important role in ore formation. The contact zone between the porphyries and carbonates, the structurally fractured zone of carbonate and clastic rocks, and the zone with well-developed fractures are the ideal locations for ore bodies. Four types of mineralization have been recognized： 1） porphyry-style stockwork gold–iron（copper） ore, 2） skarn-style gold-iron（copper and lead） ore in the near contact zone, 3） strata-bound, lense-type lead–silver–gold ore in the outer contact zone, and 4） distal vein-type gold–lead–silver ore. Supergene processes led to the formation of oxide ore, such as the weathered and accumulated gold–iron ore, the strata-bound fracture oxide ore, and the structure-controlled vein-type ore. Most of these ore deposits are distributed along the axis of the depressed basin, with the hypogene ore controlling the shape and characteristics of the oxide ore. This study provides critical geology understanding for mineral prospecting scenarios.