Pure blue and white light electroluminescence in a multilayer organic light-emitting diode using a new blue emitter

We characterized the 6,12-bis{[N-（3,4-dimethylphenyl）-N-（2,4,5-trimethylphenyl）]amino} chrysene （BmPAC）, which has been proven to be a blue fluorescent emission with high EL efficiency. The blue fluorescent device exhibits good performance with an external quantum efficiency of 5.8% and current efficiency of 8.9 cd/A, respectively. Using BmPAC, we also demonstrate a hybrid phosphorescence/fluorescence white organic light-emitting device （WOLED） with high efficiency of 36.3 cd/A. In order to improve the relative intensity of blue light, we plus a blue light-emitting layer （BEML） in front of the orange light emitting layer （YEML） to take advantage of the excess singlet excitons. With the new emitting layer of BEML/YEML/BEML, we demonstrate the fluorescence/phosphorescence/fluorescence WOLED exhibits good performance with a current efficiency of 47 cd/A and an enhanced relative intensity of blue light.

High color rendering index white organic light-emitting diode using levofloxacin as blue emitter

Levofloxacin （LOFX）, which is well-known as an antibiotic medicament, was shown to be useful as a 452-nm blue emitter for white organic light-emitting diodes （OLEDs）. In this paper, the fabricated white OLED contains a 452-nm blue emitting layer （thickness of 30 nm） with 1 wt% LOFX doped in CBP （4,4＇-bis（carbazol-9-yl）biphenyl） host and a 584-nm orange emitting layer （thickness of 10 nm） with 0.8 wt% DCJTB （4-（dicyanomethylene）-2-tert-butyl-6-（1,1,7,7- tetramethyljulolidin-4-yl-vinyl）-4H-pyran） doped in CBE which are separated by a 20-nm-thick buffer layer of TPBi （2,2＇,2＂-（benzene-1,3,5-triyl）-tri（1-phenyl-lH-benzimidazole）. A high color rendering index （CRI） of 84.5 and CIE chromaticity coordinates of （0.33, 0.32）, which is close to ideal white emission CIE （0.333, 0.333）, are obtained at a bias voltage of 14 V. Taking into account that LOFX is less expensive and the synthesis and purification technologies of LOFX are mature, these results indicate that blue fluorescence emitting LOFX is useful for applications to white OLEDs although the maximum current efficiency and luminance are not high. The present paper is expected to become a milestone to using medical drug materials for OLEDs.

Organic Light Emitting Diodes with Lithium Contained Alq3 as Electron Injection Layer

lNovel lithium doped tris 8 hydroxylquinoline aluminium(Alq3:Li) layer is deposited between emission layer and electron injection aluminium electrode as an electron injection assistant layer in different organic light emitting diodes(OLED) to lower the electron injection barrier. In these devices, Alq3 is used as emission layer, and a bilayer film of N,N bis (1 naphhyl) N,N diphenyl 1,1 biphenyle 4,4' diamine(NPB) and 4,4,4' tris(3 methyl phenylphenylamino) triphenylamine( m MTDATA) used as hole transport layer(HTL). The electroluminescent performance of devices with different thicknesses of Alq3∶Li shows that the insertion of the lithium doped Alq3 layer can reduce the turn on voltage by at least 2 volts, and the stability of devices with this lithium doped Alq3 layer is improved too. It can also change the efficiency of devices. Compared with an ultra thin lithium fluoride(LiF) layer, Alq3∶Li sheet gives similar effects but higher efficiency and can be much thicker and hence it is easier to control the deposition.

Organic light emitting diodes using magnesium doped organic acceptor as electron injection layer and silver as cathode

Organic light emitting diodes employing magnesium doped electron acceptor 3, 4, 9, 10 perylenetetracarboxylic dianhydride （Mg：PTCDA） as electron injection layer and silver as cathode were demonstrated. As compared to Mg ： Ag cathode, the combination of the Mg ： PTCDA layer and silver provided enhanced electron injection into tris （8- quinolinolato） aluminium. The device with 1 ： 2 Mg ： PTCDA and Ag showed an increase of about 12% in the maximum current efficiency, mainly due to the improved hole-electron balance, and an increase of about 28% in the maximum power efficiency, as compared to the control device using Mg ： Ag cathode. The properties of Mg ： PTCDA composites were studied as well.

Thermal Analysis of Organic Light Emitting Diodes Based on Basic Heat Transfer Theory

We investigate the thermal characteristics of standard organic light-emitting diodes （OLEDs） using a simple and clear 1D thermal model based on the basic heat transfer theory. The thermal model can accurately estimate the device temperature, which is linearly with electrical input power. The simulation results show that there is almost no temperature gradient within the OLED device working under steady state conditions. Furthermore, thermal analysis simulation results show that the surface properties （convective heat transfer coetficient and surface emissivity） of the substrate or cathode can significantly affect the temperature distribution of the OLED.

STUDY OF DEGRADATION MECHANISM AND PACKAGING OF ORGANIC LIGHT EMITTING DEVICES

Organic Light Emitting Devices (OLED) have attracted much attention recently, for their applications in futureFlat Panel Displays and lighting products. However, their fast degradation remained a major obstacle to theircommercialization. Here we present a brief summary of our studies on both extrinsic and intrinsic causes for the fastdegradation of OLEDs. In particular, we focus on the origin of the dark spots by 'rebuilding' cathodes, which confirms thatthe growth of dark spots occurs primarily due to cathode delamination. In the meantime, we recapture the findings from thesearch for suitable OLED packaging materials, in particular polymer composites, which provide both heat dissipation andmoisture resistance, in addition to electrical insulation.

Highly Efficient and Stable Hybrid White Organic Light Emitting Diodes with Controllable Exciton Behavior by a Mixed Bipolar Interlayer

Highly efficient and stable hybrid white organic light-emitting diodes （HWOLEDs） with a mixed bipolar interlayer between fluorescent blue and phosphorescent yellow emitting layers are demonstrated. The bipolar interlayer is a mixture of p-type diphenyl （l0-phenyl-lOH-spiro [acridine-9,9＇-fluoren]-3Lyl） phosphine oxide and n-type 2＇,2- （1,3,5-benzinetriyl）-tris（1-phenyl-l-H-benzimidazole）. The electroluminance and Commission Internationale de l＇Eclairage （CIE1931） coordinates＇ characteristics can be modulated easily by adjusting the ratio of the hole- predominated material to the electron-predominated material in the interlayer. The hybrid WOLED with a p-type：n-type ratio of 1：3 shows a maximum current efficiency and power efficiency of 61.1 ed/A and 55.8 lm/W, respectively, with warm white CIE coordinates of （0.34, 0.43）. The excellent efficiency and adaptive CIE coordi- nates are attributed to the mixed interlayer with improved charge carrier balance, optimized exciton distribution, and enhanced harvesting of singlet and triplet excitons.

Improvement of electro-optic performances in white organic light emitting diodes with color stability by buffer layer and multiple dopants structure

A series of white phosphorescent OLED devices with buffer layer and multiple dopant structure is investigated in order to obtain better electro-optic performances and color stability. The color coordinate and color stability are related to the location of multiple dopants layer, and the optimized location can compensate for the change of the blue emission intensity under a high voltage and stabilize the spectrum. The electro-optic performances and color stability can be further improved by changing the composition and thickness of the buffer layer between the emitting layer and the electron transport layer.In device B2, the distance from multiple dopant layer to buffer layer is 2 nm and the thickness of buffer layer is 5 nm,the maximum luminance, current density, and power efficiency can reach 9091 cd/m^2, 364.5 mA/cm^2, and 26.74 lm/W,respectively. The variation of international commission on the illumination（CIE） coordinate of device B2 with voltage increasing from 4 V to 7 V is only（0.006, 0.004）.

Improved device reliability in organic light emitting devices by controlling the etching of indium zinc oxide anode

A controllable etching process for indium zinc oxide （IZO） films was developed by using a weak etchant of oxalic acid with a slow etching ratio. With controllable etching time and temperature, a patterned IZO electrode with smoothed surface morphology and slope edge was achieved. For the practical application in organic light emitting devices （OLEDs）, a sup- pression of the leak current in the current-voltage characteristics of OLEDs was observed. It resulted in a 1.6 times longer half lifetime in the IZO-based OLEDs compared to that using an indium tin oxide （ITO） anode etched by a conventional strong etchant of aqua regia.

Organic Light Emitting Diodes with p-Si Anodes and Semitransparent Ce/Au Cathodes

The Ce （x nm）/Au （15 nm） stacked layers were used as semitransparent cathodes in the top-emission organic light emitting devices （TOLEDs） fabricated on a p-type silicon anodes and substrate,where x varies from 4 to 16.The consequence of the Ce layer thickness on transmittance and the device performance were studied when the organic layers NPB （60 nm）/ALQ （60 nm） were kept unchanged,where NPB was N,N＇-bis-（1-naphthl）-diphenyl-1,1＇-biphenyl-4,4＇-diamine,and AlQ is tris-（8-hydroxyquinoline） aluminum.The cathode of Ce （11 nm）/Au （15 nm） has a transparency of 46%,and the TOLED with it achieves the highest luminescence efficiencies：a current efficiency of 0.91 cd/A at 13.7 V and a peak power efficiency of 0.28 lm/W at 9 V.The turn-on voltage is 3.0 V.The Ce/Au cathode is both chemically and electrically stable.

Novel Field Emission Organic Light Emitting Diodes with Dynode

This work presents novel field emission organic light emitting diodes(FEOLEDs) with dynode,in which an organic EL light-emitting layer is used instead of an inorganic phosphor thin film in the field emission display(FED).The proposed FEOLEDs introduce field emission electrons into organic light emitting diodes(OLEDs),which exhibit a higher luminous efficiency than conventional OLED.The field emission electrons emitted from the carbon nanotubes(CNTs) cathode and to be amplified by impact the dynode in vacuum.These field emission electrons are injected into the multi-layer organic materials of OLED to increase the electron density.Additionally,the proposed FEOLED increase the luminance of OLED from 10 820 cd/m2 to 24 782 cd/m2 by raising the current density of OLED from an external electron source.The role of FEOLED is to add the quantity of electrons-holes pairs in OLED,which increase the exciton and further increase the luminous efficiency of OLED.Under the same operating current density,the FEOLED exhibits a higher luminous efficiency than that of OLED.

High efficient and high color rendering index white organic light-emitting diodes

We have fabricated high-efficient white organic light-emitting diodes （WOLEDs） using two types of electron transport materials with different electron mobility. The effect of the electron mobility on the device performance is discussed. In addition, to generate the desired white emission and high color rendering index, we perform the structure design of OLED, in which the functions of co-host of blue and green dopants on chromatic-stability are investigated. Experimental results find that the maximum color rendering index reaches as high as 91 at the voltage of 8 V.

Increased performance of an organic light-emitting diode by employing a zinc phthalocyanine based composite hole transport layer

We demonstrate that the electroluminescent performances of organic light-emitting diodes are significantly improved by employing a zinc phthalocyanine （ZnPc）-based composite hole transport layer （c-HTL）. The optimum ris-（8-hydroxyquinoline）aluminum （Alq3）-based organic light-emitting diode with a c-HTL exhibits a lower turn-on voltage of 2.8 V, a higher maximum current efficiency of 3.40 cd/A and a higher maximum power efficiency of 1.91 lm/W, which are superior to those of the conventional device （turn-on voltage of 3.8 V, maximum current efficiency of 2.60 cd/A, and maximum power efficiency of 1.21 lm/W）. We systematically studied the effects of different kinds of N’-diphenyl-N,N’-bis（1-naphthyl）（1,1’-biphenyl）-4,4’diamine （NPB）：ZnPc c-HTL. Meanwhile, we also investigate their mechanisms different from that in the case of using ZnPc as buffer layer. The specific analysis is based on the absorption spectra of the hole transporting material and current density–voltage characteristics of the corresponding hole-only devices.

Delayed Fluorescence and Amplified Chirality via Modified Substitution Position for Deep-red Circularly Polarized Organic Light Emitting-diodes

Developing easily accessible deep-red/near-infrared circularly polarized emitters for practical organic light-emitting diodes remains a significant challenge.Here,a practical strategy has been proposed for developing deep-red circularly polarized delayed fluorescent emitters based on a novel chiral acceptor platform.By changing triphenylamine(TPA)substitution position from para to meta,R/S-M-TBBTCN demonstrated thermally activated delayed fluorescence(TADF)properties with a delayed lifetime of 6.6µs that R/S-P-TBBTCN doesn’t have.Furthermore,R/S-M-TBBTCN showed a 65 nm red-shift in emission and a 10-fold enhancement in asymmetry factor(glum),compared with R/S-P-TBBTCN.The solution-processed nondoped circularly polarized organic light-emitting diodes(CP-OLEDs)based on R-M-TBBTCN display deep-red emission and 2.2%external quantum efficiency.

A systematic study on efficiency enhancements in phosphorescent green, red and blue microcavity organic light emitting devices

A systematic study has been conducted on microcavity organic light emitting diodes(OLEDs)based on green,red and blue phosphorescent emitters to elucidate the microcavity effects for different color emitters.We found that the luminance output is determined by the reflectivity of the semitransparent electrode and the photopic response of the green,red and blue emitters.While the luminance enhancements of blue and red phosphorescent microcavity devices are small,a current efficiency as high as 224 cd A21 is obtained in the green phosphorescent microcavity OLEDs.

Efficient and stable non-doped deep-blue organic light emitting diode based on an anthracene derivative

A new anthracene derivative 9,10-bis[3,5-di(4-tert-butylphenyl)phenyl]anthracene (BPPA) was synthesized via Suzuki coupling reaction and characterized by 1H NMR spectrum,mass spectrum,and elemental analysis.BPPA exhibits deep-blue emission both in solution and in solid thin film.This compound has a non-planar structure that results in high thermal stability and the phenomenon of polymorphism.The non-doped device based on this material shows stable deep-blue emission with the 1931 Commission international de I'Eclairage (CIE) coordinate of (0.15,0.05) under different applied voltages.The device exhibits the maximum external quantum efficiency of 2.2% at 14.9 mA/cm2 with luminance of 105 cd/m2.

Position dependence of extraction ef f iciency in organic light-emitting diodes with photonic crystal structure

We demonstrate by finite-difference time-domain simulations that a one-dimensional （1D） photonic crys- tal （PC） structure between glass substrate and indium tin oxide layer can improve the light extraction efficiency of organic light-emitting diodes. The extraction efficiency depends on the emitters＇ positions varying laterally in a unit cell of PC. The highest efficiency is obtained when the emitters are under higher refractive index strips. Efficiency decreases when the emitters shift to lower refractive index strips. Simulations for both transverse magnetic and transverse electric modes indicate that when emitters are close to the middle of the higher refractive index strips, the guided wave transmits with less divergence and inhibited reflection because of the guiding effect of higher refractive index strips. A modified method that considers the position effects is proposed to calculate the extraction efficiency more precisely.

Thin-film encapsulation for top-emitting organic light-emitting diode with inverted structure

We theoretically study the light outcoupling efficiency of top-emitting organic light-emitting diode（OLED） with inverted structure and thin-film encapsulation.Thin-film optics is used to optimize the layer thickness to obtain high transmittance.Dipole mode is used to analyze the light outcoupling efficiency of the top-emitting OLED.Through this process,we can optimize the thin-film thickness with high transmittance and optimize the outcoupling efficiency of OLED.Compared with previous research,the current design method is a novel process.

Digitally programmable organic light‐emitting tetrodes

Limited to the structure of traditional light‐emitting devices,electronic devices that can directly convert machine language into human visual information without introducing any back‐end circuit are still not easy to achieve.Based on a specially designed three‐phase co‐planar electrode structure,a new type of three‐phase alternating current driven organic light‐emitting device with the integration of emission and control functions,full‐color tunability and simple device structure is demonstrated in this study.We integrate the light‐emitting function of color‐tunable light‐emitting devices and the switching of three triodes in a single three phase organic light‐emitting device.The state control of luminous color and luminance intensity merely requires the introduction of a kind of machine language,that is an easy‐to‐program 6‐bit binary number coded digital signals.The color adjustable area covers 66%of the color triangle of the National Television System Committee.Such simple and easy‐to‐integrate light‐emitting system has great potential applications in the next‐generation man‐machine interface.