Cation-Anion Redox Active Organic Complex for High Performance Aqueous Zinc Ion Battery

Organic redox compounds are attractive cathode materials in aqueous zinc-ion batteries owing to their low cost,environmental friendliness,multiple-electron-transfer reactions,and resource sustainability.However,the realized energy density is constrained by the limited capacity and low voltage.Herein,copper-tetracyanoquinodimethane(CuTCNQ),an organic charge-transfer complex is evaluated as a zinc-ion battery cathode owing to the good electron acceptation ability in the cyano groups that improves the voltage output.Through electrochemical activation,electrolyte optimization,and adoption of graphene-based separator,CuTCNQ-based aqueous zinc-ion batteries deliver much improved rate performance and cycling stability with anti-self-discharge properties.The structural evolution of CuTCNQ during discharge/charge are investigated by ex situ Fourier transform infra-red(FT-IR)spectra,ex situ X-ray photoelectron spectroscopy(XPS),and in situ ultraviolet visible spectroscopy(UV-vis),revealing reversible redox reactions in both cuprous cations(Cu^(+))and organic anions(TCNQ^(x-1)),thus delivering a high voltage output of 1.0 V and excellent discharge capacity of 158 mAh g^(-1).The remarkable electrochemical performance in Zn//CuTCNQ is ascribed to the strong inductive effect of cyano groups in CuTCNQ that elevated the voltage output and the graphene-modified separator that inhibited CuTCNQ dissolution and shuttle effect in aqueous electrolytes.

ATR-FTIR and XPS study on the structure of complexes formed upon the adsorption of simple organic acids on aluminum hydroxide

Information on the binding of organic ligands to metal （hydr）oxide surfaces is useful for understanding the adsorption behaviour of natural organic matter on metal （hydr）oxide. In this study, benzoate and salicylate were employed as the model organic ligands and aluminum hydroxide as the metal hydroxide. The attenuated total reflectance Fourier transform infrared （ATR-FTIR） spectra revealed that the ligands benzoate and salicylate do coordinate directly with the surface of hydrous aluminum hydroxide, thereby forming innersphere surface complexes. It is concluded that when the initial pH is acidic or neutral, monodentate and bridging complexes are to be formed between benzoate and aluminum hydroxide while bridging complexes predominate when the initial pH is alkalic. Monodentate and bridging complexes can be formed at pH 5 while precipitate and bridging complexes are formed at pH 7 when salicylate anions are adsorbed on aluminum hydroxide. The X-ray photoelectron （XP） spectra demonstrated the variation of C 1 s binding energy in the salicyate and phenolic groups before and after adsorption. It implied that the benzoate ligands are adsorbed through the complexation between carboxylate moieties and the aluminum hydroxide surface, while both carboxylate group and phenolic group are involved in the complexation reaction when salicylate is adsorbed onto aluminum hydroxide. The information offered by the XPS confirmed the findings obtained with ATR-FTIR.

Effects of Y(Ⅲ) Ions on the Fluorescence Properties of Ce(Ⅲ) Ion and the Organic Ligands in the Complex

The enhancement effects of Y ( Ⅲ) ions on the fluorescence of Ce ( Ⅲ) in Ce ( Ⅲ)-Y ( Ⅲ)-PMMA (polymethylmethacrylate ) or Ce ( Ⅲ)-Y ( Ⅲ)-PVC (polyvinyl chloride ) complex systems were observed. The influence of Y ( Ⅲ) ions on the emission spectra of PMMA ligands in PMMA-Y ( Ⅲ) and the fluorescent enhance- ment of Y( Ⅲ) on Ce( Ⅲ) emission in PMMA-Ce-Y by Y( Ⅲ) ion were studied. It was also of interest to note that when Y ( Ⅲ) ions were added into PMMA and into bpy(bipyridine ) , respectively , the emission spectrum of PMMA ligands was split into fine structure bands by Y ( Ⅲ) , and the fluorescence intensities of bpy ligands in bpy-Y ( Ⅲ) complexes were considerably increased.

Highly Efficient Organic Ultraviolet Photodetectors Based on Re(I) Complexes

High response organic ultraviolet photodetectors（UV-PDs） were demonstrated with 4,4＇,4”- tris[3-methyl-pheny（phenyl）amino]triphenylamine（m-MTDATA） and two Re（Ⅰ） complexes, （bathocuproine）- Re（CO）3CI（Re-BCP） and （bathophenanthroline）Re（CO）3Cl（Re-Bphen） to act as the electron donor and acceptor, re- spectively. UV-PDs have the configuration of indium tin oxide（ITO）/m-MTDATA（25 nm）/m-MTDATA：Re-complex （25-35 nm）/Re-complex（20 nm）/LiF（l nm）/Al（200 nm） with different blend layer thicknesses of 25, 30 and 35 nm. The optimized PD based on Re-Bphen offers a corrected-dark photocurrent up to 760μA/cm^2 at -10 V, corresponding to a response of 310 mA/W which is among the best values reported for organic UV-PDs. Excellent electron transport ability makes for such high photo-to-electron conversion.

Adsorption，Oxidation and Complexation of Water－So－Inble Organic Snbstances in Soils

A greater part of water-solnble organic substances, accounting for 6070To of the total, could be adsorbedby soils, which included strongly and weekly reducing substances, positively and negatively charged substancesand substances containing amido. There existed a tendency of decrease in adsorption of the negativelycharged organic substances by the soil from South China to North China, with expression as Coulombianadsorption. A simultaneous reduction of iron and manganese appeared with clear voltammetric behavioursupon oxidation of water-soluble organic substances. Complexation of organic ligands with ferrons iron andmanganous manganese was proved by differential pulse voltammetric method, with disappearance of oxidationpeaks of ferrous iron and manganous manganese at 0.00 V and 0.35 V and occurrence of Fe`+-complex andMn￣2+ -complex at 0.75 V and 1.2 V respectively, whose peak potentials shifted backward.

Synthesis and Spectral Properties of Mixed-Ligand Complexes of Lanthanide Perchlorate with Bis-(phenylsulfinyl)ethane and Organic Lewis Bases

Six lanthanide complexes with bis(phenylsulfinyl)ethane(bphse) and organic bases(phen: 1,10 phenanthroline and bipy: 2,2'-bipyridine) were synthesized and characterized by elemental analysis, conductance and spectral (IR, UV Visible) data. The complexes were Ln(bphse) 2(bipy)(ClO 4) 3· n H 2O and Ln 2(bphse) 3(phen) 2(ClO 4) 6·H 2O(where Ln=Nd, Eu and Gd; n =0～2). IR spectral data confirmed that the lanthanide ions were coordinated by oxygen atoms from bphse and nitrogen atoms from phen or bipy. Exitation and emission spectra of Eu complexes were measured and discussed.

Application of the Reactions of Ferrocene（Ⅰ） Salts with Bis［dicarbonyl（η￣5－cyclopentadienyl）iron］ and Bis［dicarbonyl（η￣4－butadiene）cobalt］ Complexesto Organic Synthesis

omplexes[(η￣5-C_5H_5)Fe (CO)_2L]￣+BF(Ⅰ)[L=PPh_3,P(OPH)_3,P(OC_2H_5)_3,pyridine, 3-acetyl-pyridine, 4-methyl-pyridine, phenyl cyanide, quinoline] and[(η￣4-C_4H_6)Co(CO)_2L]￣+BF(Ⅱ)[L=PPh_3,P(OPH)_3,P(OC_2H_5)_3],were respec-tively produced in the reactions of[(η￣5-C_5H_5)Fe (CO)_2 ]_2 and [ (η￣4-C_4H_5 )Co (CO)_2]_2with Cp_2FeBF_4 in the presence of the ligands. Some characteristics of these reac-tions were discussed and all the complexes were identified by iR and ￣1H NMR spec-troscopy. These complexes are air-stable and the preparative metliods are simple.

High Rate and Long Lifespan Sodium‑Organic Batteries Using Pseudocapacitive Porphyrin Complexes‑Based Cathode

Sodium-organic batteries utilizing natural abundance of sodium element and renewable active materials gain great attentions for grid-scale applications.However,the development is still limited by lack of suitable organic cathode materials with high electronic conductivity that can be operated stably in liquid electrolyte.Herein,we present 5,15-bis(ethynyl)-10,20-diphenylporphyrin(DEPP)and[5,15-bis(ethynyl)-10,20-diphenylporphinato]copper(II)(CuDEPP)as new cathodes for extremely stable sodium-organic batteries.The copper(II)ion partially contributes the charge storage and significantly stabilizes the structure of porphyrin complex for electrochemical energy storage.In situ electrochemical stabilization of organic cathode with a lower charging current density was identified which enables both improved high energy density and power density.An excellent longterm cycling stability up to 600 cycles and an extremely high power density of 28 kW kg−1 were achieved for porphyrin-based cathode.This observation would open new pathway for developing highly stable sodium-organic cathode for electrochemical energy storage.

Synergistic Optimization of Buried Interface by Multifunctional Organic-Inorganic Complexes for Highly Efficient Planar Perovskite Solar Cells

For the further improvement of the power conversion efficiency(PCE)and stability of perovskite solar cells(PSCs),the buried interface between the perovskite and the electron transport layer is crucial.However,it is challenging to effectively optimize this interface as it is buried beneath the perovskite film.Herein,we have designed and synthesized a series of multifunctional organic-inorganic(OI)complexes as buried interfacial material to promote electron extraction,as well as the crystal growth of the perovskite.The OI complex with BF4−group not only eliminates oxygen vacancies on the SnO_(2) surface but also balances energy level alignment between SnO_(2) and perovskite,providing a favorable environment for charge carrier extraction.Moreover,OI complex with amine(−NH_(2))functional group can regulate the crystallization of the perovskite film via interaction with PbI2,resulting in highly crystallized perovskite film with large grains and low defect density.Consequently,with rational molecular design,the PSCs with optimal OI complex buried interface layer which contains both BF4−and−NH_(2) functional groups yield a champion device efficiency of 23.69%.More importantly,the resulting unencapsulated device performs excellent ambient stability,maintaining over 90%of its initial efficiency after 2000 h storage,and excellent light stability of 91.5%remaining PCE in the maximum power point tracking measurement(under continuous 100 mW cm−2 light illumination in N2 atmosphere)after 500 h.

Highly Efficient Greenish-Yellow Phosphorescent Organic Light-Emitting Diodes Based on a Novel 2,3-Diphenylimidazo[1,2-a]Pyridine Iridium(Ⅲ) Complex

A cyclometalated greenish-yellow emitter 2,3-diphenylimidazo[1,2-a]pyridine iridium（Ill） complex is successfully synthesized and used to fabricate phosphorescent organic light-emitting diodes. The optimized device exhibits a greenish-yellow emission with the peak at 523nm and a strong shoulder at 557nm, corresponding to Commission Internationale de l＇Eclairage coordinates of （0.38, 0.68）. The full width at half maximum of the device is 93 nm, which is broader than the fac-tris（2-phenylpyridine）iridium [Ir（ppy）3] based reference device of 78 nm. Meanwhile, a maximum current efficiency of 62.6 cd/A （47.51m/W） is obtained. This result is higher than a maximum current efficiency of 54.8 cd/A （431m/W） of the Ir（ppy）a based device. The results indicate that this new iridium complex may have potential applications in fabricating high color rendering index white organic light emitting diodes.

Auxiliary Software for Defining the Parameters of the Structural Organization of a Complex System

The developed auxiliary software serves to simplify, standardize and facilitate the software loading of the structural organization of a complex technological system, as well as its further manipulation within the process of solving the considered technological system. Its help can be especially useful in the case of a complex structural organization of a technological system with a large number of different functional elements grouped into several technological subsystems. This paper presents the results of its application for a special complex technological system related to the reference steam block for the combined production of heat and electricity.

A Novel Organic-Inorganic Complex: Synthesis and Crystal Structure of [Ca(DMSO)_5(H_2O)]_2SiMo_(12)O_(40)

A novel organic-inorganic complex [Ca(DMSO)5(H2O)]2SiMo12O40 was synthesized from CaCl2, DMSO and H4SiMo12O40nH2O in mixed solvent of acetonitrile and water. Its structure was characterized with elemental analysis, IR and X-ray diffraction analysis.

Comparison of zinc complexation properties of dissolved organic matter from surface waters and wastewater treatment plant effluents

Unlike natural organic matter(NOM), wastewater organic matter(WWOM) from wastewater treatment plant effluents has not been extensively studied with respect to complexation reactions with heavy metals such as copper or zinc. In this study, organic matter from surface waters and a wastewater treatment plant effluent were concentrated by reverse osmosis(RO) method. The samples were treated in the laboratory to remove trace metals and major cations. The zinc complexing properties of both NOM and the WWOM were studied by square wave anodic stripping voltammetry(SWASV). Experimental data were compared to predictions using the Windermere Humic Aqueous Model(WHAM) Version VI. We found that the zinc binding of WWOM was much stronger than that of NOM and not well predicted by WHAM. This suggests that in natural water bodies that receive wastewater treatment plant effluents the ratio of WWOM to NOM must be taken into account in order to accurately predict free zinc activities.

Effect of B_2O_3 on the Structure and Photoluminescence Properties of Sol-gel Glass Doped with Terbium Organic Complex

Both silica and boron-silica glass materials doped with terbium organic complex were prepared by in situ sol-gel method respectively. XRD and SEM measurements were performed to verify the non-crystalline structure of the glass. The influence of the glass contents on the structure of the glass and the erwrgy level of the doped Tb （Ⅲ） ions was analyzed by the emission spectra and IR spectra. The effect of B2O3 on the photolumirwscence properties of rare earth organic complex in silica- based glass was investigated. The IR spectra indicate that the in situ sylthesized rare earth complex molecule was confined to the micropores of the bost and the vibration of the ligands was frozen. When B2O3 was added into the silica host gel, B2O3 had little influence on the noncrystallirw structure of the glass, and BO3 triangle, which had a layer structure different from the silica framework, could form. So the silica network became more inhomogenous, and the luminescence of terbium complexes was quenched with the increase of the B2O23 amount.

Platinum complexes as phosphorescent emitters in highly efficient organic light-emitting diodes

Applications of platinum complexes as phosphorescent emitters in high efficiency organic light-emitting diodes （OLEDs） were shortly discussed in this paper. Key recent studies on highly efficient blue, green, red and white-phosphorescent OLEDs based on Pt complexes are presented in terms of efficiency and color quality.

Highly stable perovskite solar cells with a novel Ni-based metal organic complex as dopant-free hole-transporting material

Hole-transporting material(HTM)plays a paramount role in enhancing the photovltaic performance of perovskite solar cells(PSCs).Currently,the vast majority of these HTMs employed in PSCs are organic small molecules and polymers,yet the use of organic metal complexes in PSCs applications remains less explored.To date,most of reported HTMs require additional chemical additives(e.g.Li-TFSI,t-TBP)towards high performance,however,the introduction of additives decrease the PSCs device stability.Herein,an organic metal complex(Ni-TPA)is first developed as a dopant-free HTM applied in PSCs for its facile synthesis and efficient hole extract/transfer ability.Consequently,the dopant-free Ni-TPAbased device achieves a champion efficiency of 17.89%,which is superior to that of pristine Spiro-OMeTAD(14.25%).Furthermore,we introduce a double HTM layer with a graded energy bandgap containing a Ni-TPA layer and a CuSCN layer into PSCs,the non-encapsulated PSCs based on the Ni-TPA/CuSCN layers affords impressive efficiency up to 20.39%and maintains 96%of the initial PCE after 1000 h at a relative humidity around 40%.The results have demonstrated that metal organic complexes represent a great promise for designing new dopant-free HTMs towards highly stable PSCs.

Spectroscopic Analysis and Study of Charge Transport Properties for Pinacyanol Chloride-Organic Acceptor Complex as Potential Optoelectronics Material

Organic photoconductor, pinacyanol chloride, has been studied with infrared spectroscopy because of its thermal activation energy (Ea) and band gap (Eg = 2Ea) lying in the infrared range. Particularly, pinacyanol chloride and its charge transfer (CT) complexes with chloranil, DDQ, TCNQ and TCNE as organic acceptors are studied in details. The CT complexes are having neither two absorption edges like ternary complex having one donor and two acceptors nor binary type with Lorentzian or Gaussian envelopes. The forbidden gap is direct band gap except chloranil complex due to increase in molecular distance and CT interaction. There is imperfect nesting and partial screening determining the mid-IR envelope, which is qualitatively different from the envelopes in binary systems. There is inverted parabola in some range below this envelope. It is explained how infrared absorption is related with the applications of such organic photoconductors in optoelectronic devices.

Synthesis and Crystal Structure of an Organic-inorganic Complex [Hg(DMSO)_2(H_2O)]_2 [GeW_(12)O_(40)]·DMSO·H_2O

An organic-inorganic mercury coordination compound [Hg（DMSO）2（H2O）]2 [GeW12O40]· DMSO·H2O （DMSO =dimethyl sulfoxide） has been synthesized and characterized by IR, UV spectra, elemental analysis, TG-DTA and X-ray single-crystal diffraction. Structural analysis revealed that in the title compound, the mercury is three-coordinated to show the distorted trigonal cone geometry, and depending on the electrostatic interaction to connect the polyanion [α-GeW12O40]^4-. TG-DTA study manifests the decomposition temperature of the polyanion framework in the title compound is 513.5℃, which is much higher than that of the anion framework. It means that the formation of the organic-inorganic mercury coordination compound made the polyanion [α-GeW12O40]^4- to he more stable.

Synthesis and crystal structure of an organic-inorganic complex [Cu(DMF)_3(H_2O)_2]_2[SiMo_(12)O_(40)]·2H_2O

The synthesis and crystal smacture of an polyoxometalate-based organic-inorganic complex [Cu（DMF）3（H2O）212[SiMo12O40].2H2O （DMF = N, N-dimethyl formamide） is described in this article. It was characterized using elemental analysis, thermal analysis, infrared, ultraviolet, and electron spin resonance spectroscopic studies. The X-ray crystallography analysis showed that the copper centers are pentacoordinated to show the square pyramidal geometry, and the polyanion [SiMo12O40]4- which is semi-coordinated to the copper（I/） centers prevents the existence of a sixth ligand. In addition, the intracationic hydrogen interaction enhanced the stability of the copper coordination cation.

Organic Melt Crystallization as a Method for Synthesis of Supramolecular Complexes

The most simple method for solventless synthesis of supramolecular complex of CMCR·2BPY·BZP, [CMCR = C-methylcalix[4]resorcinarene, BPY = 4,4'-bipyridine, BZP = benzophenone], is proposed. Although CMCR by itself is high melting point compound (above 300°C), CMCR was found to be dissolved in melt mixture of BPY and BZPeven below 120°C. In the mixture of the three components, the reaction occurs to form CMCR·2BPY·BZP supramolecular complex.