Performance improvement in pentacene organic thin film transistors by inserting a C_(60) ultrathin layer

The contact effect on the performances of organic thin film transistors is studied here. A C60 ultrathin layer is inserted between Al source-drain electrode and pentacene to reduce the contact resistance. By a 3 nm C60 modification, the injection barrier is lowered and the contact resistance is reduced. Thus, the field-effect mobility increases from 0.12 to 0.52 cm2/（V.s）. It means that inserting a C60 ultra thin layer is a good method to improve the organic thin film transistor （OTFT） performance. The output curve is simulated by using a charge drift model. Considering the contact effect, the field effect mobility is improved to 1.15 cm2/（V-s）. It indicates that further reducing the contact resistance of OTFTs should be carried out.

Contact-Size-Dependent Cutoff Frequency of Bottom-Contact Organic Thin Film Transistors

The contact-size-dependent characteristic of cutoff frequency fT in bottom-contact organic thin film transistors （OTFTs） is studied. The effects of electrode thickness, field-effect mobility, channel length and gate-source voltage on the contact length （source and drain electrodes＇ length） related contact resistance of bottom-contact OTFTs are performed with a modified transmission line model. It is found that the contact resistance increases dramatically when the contact length is scaled down to 20O nm. With the help of the contact length related contact resistance, contact-size-dependent fT Of bottom-contact OTFTs is studied and it is found that fr increases with the decrease of the contact length in bottom-contact OTFTs.

Temperature Dependence of Electrical Properties of Organic Thin Film Transistors Based on pn Heterojuction and Their Applications in Temperature Sensors

Organic thin film transistors based on an F16CuPc/α6T pn heterojunction have been fabricated and analyzed to investigate the temperature dependence of electrical properties and apply in temperature sensors. The mobility follows a thermally activated hopping process. At temperatures over 200 K, the value of thermal activation energy (EA) is 40. 1 meV, similar to that of the single-layer device. At temperatures ranging from 100 to 200 K, we have a second regime with a much lower EA of 16.3 meV, where the charge transport is dominated by shallow traps. Similarly, at temperatures above 200 K, threshold voltage (VT) increases linearly with decreasing temperature, and the variations of VT of 0.185 V/K is larger than the variation of VT (~0.020 V/K) in the single layer devices. This result is due to the interface dipolar charges. At temperatures ranging from 100 K to 200 K, we have a second regime with much lower variations of 0.090 V/K. By studying gate voltage (VG)-dependence temperature variation factor (k), the maximum value of k (~0.11 dec/K) could be obtained at VG = 5 V. Furthermore, the pn heterojunction device could be characterized as a temperature sensor well working at low operating voltages.

Top Contact Pentacene Organic Thin Film Field Effect Transistors

Using pentacene as an active material, the organic thin film transistors were fabricated on Si3N4/p-Si substrates by using RF-magnetron sputtered amorphous aluminium as the gate electrode contact, and using highly doped Si as the gate electrode and substrate with plasma-enhanced chemical vapor deposited （PECVD） silicon nitride as gate dielectric. Pentacene thin films were deposited by thermal evaporation on dielectrics as the active layer, then RF-magnetron sputtered amorphous aluminium was used as the source and drain contacts. Measurement results show that field effect mobility and threshold voltage are 0.043 cm2/（V·s） and 12.6 V, respectively, and on-off current ratio is nearly 1×103.

Preparation and operation characteristics of organic semiconductor transistor using thin film Al gate and copper phthalocyanine

The organic static induction transistors (OSITs) are fabricated by the method of evaporating and plating in a vacuum with copper phthalocyanine (CuPc) dye, and has a five layered structure of Au/CuPc/Al/CuPc/Au. The experiment reveals that OSITs have obtained a low driving voltage, high current density and high switch speed such as I_ DS = 1.2×10 -6 A/mm2, and the degree of 1 000 Hz. The OSITs have excellent operation characteristics of typical static induction transistors.

Application of graphene vertical field effect to regulation of organic light-emitting transistors

The luminescence intensity regulation of organic light-emitting transistor(OLED)device can be achieved effectively by the combination of graphene vertical field effect transistor(GVFET)and OLED.In this paper,we fabricate and characterize the graphene vertical field-effect transistor with gate dielectric of ion-gel film,confirming that its current switching ratio reaches up to 102.Because of the property of high light transmittance in ion-gel film,the OLED device prepared with graphene/PEDOT:PSS as composite anode exhibits good optical properties.We also prepare the graphene vertical organic light-emitting field effect transistor(GVOLEFET)by the combination of GVFET and graphene OLED,analyzing its electrical and optical properties,and confirming that the luminescence intensity can be significantly changed by regulating the gate voltage.

Influence of Temperature and Pentacene Thickness on the Electrical Parameters in Top Gate Organic Thin Film Transistor

In this contribution, we report on the effect of pentacene thickness and temperature on the performance of top gate transistors. We first investigated the temperature dependence of the transport properties in the temperature range of 258 K - 353 K. The electrical characteristics showed that the threshold voltage (VT) and the onset voltage (Von) remain unchanged. However, the subthreshold current (Ioff), the on-current (Ion) and the field effect mobility (μ) are highly affected with a slight deterioration of subthreshold slope. We observed Arrhenius-like behavior suggesting a thermally activated mobility with an activation energy EA = 68 meV. Moreover the dependence of the charge carrier mobility on the organic semiconductor thickness has also been studied. The mobility decreased as the pentacene thickness increases whereas the threshold voltage and Ioff current remain minimally affected. In order to understand the transport properties and in view to put in light morphology peculiarities of pentacene, AFM images were performed. It turns out that the pentacene grain sizes are smaller and disorganized as the film thickness increases, and charge carriers are more prone to be trapped, leading to decrease the field effect mobility and the Ion current. The devices were also tested under bias stress and the transistors with low thicknesses exhibited a relatively good electrical stability compared to those with high pentacene thicknesses. This work points out the influence of temperature, semiconductor thickness and bias stress effect on the device performance and stability of transistor using top gate configuration.

Research on the electrical characteristics of an organic thin-film field-effect transistor based on alternating-current resistance

In this article, an organic thin-film field-effect transistor （OTFFET） with top-gate and bottom-contact geometry based on pentacene as the active layer is fabricated. The experimental data of the I-V are obtained from the OTFFET device. The alternating-current （AC） resistance value of the OTFFET device is calculated using the derivation method from the experimental data, and the AC resistance trend curves of the OTFFET device are obtained with the region fitting method. We analyse the characteristics of the OTFFET device with an AC resistance trend curve. To discover whether it has a high resistance, it is proposed to judge the region of the source/drain voltage （VDs） less than the transition voltage, thereby determining whether the contact between the metal electrode and the organic semiconductor layer of the OTFFET device is Ohmic or non-Ohmic. The theoretical analysis shows that the field-effect mobility and the AC resistance are in reverse proportion. Therefore, we point out that reducing AC resistance is necessary if field-effect mobility is to be improved.

Study on characteristics of a double-conductible channel organic thin-film transistor with an ultra-thin hole-blocking layer

The properties of top-contact organic thin-film transistors （TC-OTFTs） using ultra-thin 2, 9-dimethyl-4, 7- diphenyl-1, 10-phenanthroline （BCP） as a hole-blocking interlayer have been improved significantly and a BCP interlayer was inserted into the middle of the pentacene active layer. This paper obtains a fire-new transport mode of an OTFT device with double-conductible channels. The accumulation and transfer of the hole carriers arc limited by the BCP interlayer in the vertical region of the channel. A huge amount of carriers is located not only at the interface between pentacene and the gate insulator, but also at the two interfaces of pentacene/BCP interlayer and pentacene/gate insulator, respectively. The results suggest that the BCP interlayer may be useful to adjust the hole accumulation and transfer, and can increase the hole mobility and output current of OTFTs. The TC-OTFTs with a BCP interlayer at VDS = --20 V showed excellent hole mobility μFE and threshold voltage VTH of 0.58 cm^2/（V-s） and -4.6 V, respectively.

Inorganic and Organic Solution-Processed Thin Film Devices

Thin films and thin film devices have a ubiquitous presence in numerous conventional and emerging technologies. This is because of the recent advances in nanotechnology, the development of functional and smart materials,conducting polymers, molecular semiconductors, carbon nanotubes, and graphene, and the employment of unique properties of thin films and ultrathin films, such as high surface area, controlled nanostructure for effective charge transfer, and special physical and chemical properties, to develop new thin film devices. This paper is therefore intended to provide a concise critical review and research directions on most thin film devices, including thin film transistors, data storage memory, solar cells, organic light-emitting diodes, thermoelectric devices, smart materials, sensors, and actuators. The thin film devices may consist of organic, inorganic, and composite thin layers, and share similar functionality, properties, and fabrication routes. Therefore, due to the multidisciplinary nature of thin film devices, knowledge and advances already made in one area may be applicable to other similar areas. Owing to the importance of developing low-cost, scalable, and vacuum-free fabrication routes, this paper focuses on thin film devices that may be processed and deposited from solution.

Experimental analysis of operating characteristics of organic semiconductor static induction transistor

The organic static induction transistor （OSIT） fabricated with organic semiconductor material copper-phthalocyanine （CuPc） is discussed in the paper. It has Schottky Gate electrode and sandwich structure of Au/CuPc/Al/CuPc/Au/glass. The operation mechanism of the device is studied on the physical model with practical parameters. Potential distribution and field intensity distribution in the conduction channel are computed by using finite-element method. By processing static experimental data with some mathematic tools, the V-I expression of CuPc/Al Schottky Gate is obtained and it is verified that OSIT has insaturation current property along with the increase of Drain bias voltage. By using AC small signal circuit model and appropriate numerical simulation method, the dynamic operating characteristics are investigated, and some influenced factors are analyzed.

Studying the operation characteristics and structure of vertical channel copper-phthalocyanine organic semiconductor transistor

The creation of Au/CuPc/Al/CuPc/structure is a perpendicular type electricity found in the channel of organic static induction transistor. In the following we analyze transistor operation characteristics and machine structural relation. The results express that the transistor drives the voltage low and has no-saturation current-voltage characteristics. Its operation characteristics are dependant on gate bias voltage and the construction of the aluminum electrode.The vertical channel of organic static induction transistor (OSIT), with structure of Au/CuPc/Al/CuPc/Cu, has been determined. According to the test results, the relation of its operation characteristics and device structure was analyzed. The results show that this transistor has a low driving voltage and unsaturation I-V characteristics. Its operation characteristics are dependant on gate bias voltage and the structure of the aluminum electrode.

Stretchable organic electrochemical transistors via threedimensional porous elastic semiconducting films for artificial synaptic applications

Neuromorphic computing targets realizing biomimetic or intelligence systems capable of processing abundant tasks in parallel analogously to our brain,and organic electrochemical transistors(OECTs)that rely on the mixed ionic-electronic synergistic couple possess significant similarity to biological systems for implementing synaptic functions.However,the lack of reliable stretchability for synaptic OECTs,where mechanical deformation occurs,leads to consequent degradation of electrical performance.Herein,we demonstrate stretchable synaptic OECTs by adopting a three-dimensional poly(3-hexylthiophene)(P3HT)/styrene-ethylene-butylene-styrene(SEBS)blend porous elastic film for neuromorphic computing.Such architecture shows the full capability to emulate biological synaptic behaviors.Adjusting the accumulated layer numbers of porous film enables tunable OECT output and hysteresis,resulting in transition in plasticity.Especially,with a trilayer porous film,large-scale conductance and hysteresis are endorsed for efficient mimicking of memory-dependent synapse behavior.Benefitted from the interconnected three-dimensional porous structures,corresponding stretchable synaptic OECTs exhibit excellent mechanical robustness when stretched at a 30%strain,and maintain reliable electrical characteristics after 500 stretching cycles.Furthermore,near-ideal weight updates with near-zero nonlinearities,symmetricity in long-term potentiation(LTP)and depression,and applications for image simulation are validated.This work paves a universal design strategy toward highperformance stretchable neuromorphic computing architecture and could be extended to other flexible/stretchable electronics.

Highly crystalline,highly stable n-type ultrathin crystalline films enabled by solution blending strategy toward organic single-crystal electronics

The development of n-type semiconductor is still far behind that of p-type semiconductor on account of the challenges in enhancing carrier mobility and environmental stability.Herein,by blending with the polymers,n-type ultrathin crystalline thin film was successfully prepared by the method of meniscus-guided coating.Remarkably,the n-type crystalline films exhibit ultrathin thickness as low as 5 nm and excellent mobility of 1.58 cm^(2) V^(-1) s^(-1),which is outstanding in currently reported organic n-type transistors.Moreover,the PS layer provides a high-quality interface with ultralow defect which has strong resistance to external interference with excellent long-term stability,paving the way for the application of n-type transistors in logic circuits.

Properties of C_(60) thin film transistor based on polystyrene

This paper reports that the n-type organic thin-fihn transistors have been fabricated by using C60 as the active layer and polystyrene as the dielectric. The properties of insulator and the growth characteristic of C60 film were carefully investigated. By choosing different source/drain electrodes, a device with good performance can be obtained. The highest electron field effect mobility about 1.15 cm2/（V. s） could reach when Barium was introduced as electrodes. Moreover, the C60 transistor shows a negligible ＇hysteresis effect＇ contributed to the hydroxyl-free of insulator. The result suggests that polymer dielectrics are promising in applications among n-type organic transistors.

Tetramethylammonium Iodide Additive for Enhancing the Charge Carrier Mobilities of Diketopyrrolopyrrole-Based Conju-gated Polymer in Ambipolar Organic Field-Effect Transistors

Diketopyrrolopyrrole(DPP)is one of the most promising building blocks for constructing polymer semiconductors with high charge-carrier mobilities in organic field-effect transistors(OFETs).In this study,a novel DPP-based conjugated polymer,PDPPy-BDD,was designed and synthesized.The ambipolar field-effect transistor characteristics were realized with the average hole and electron mobilities of 3.5×10^(-3)and 3.07×10^(-2)cm^(2)V^(-1)s^(-1),respectively.Both the hole and electron mobilities could be successfully en-hanced by using a tetramethylammonium iodide(NMe4l)additive.Such an enhancement was attributed to the formation of stronger interchainπ-πstackings,the weakening of the face-on packing orientation in the thin film state,and the higher channel conductivi-ties in the OFETs.

Impact of source and drain contact thickness on the performance of organic thin film transistors

This paper analyzes the impact of source（ts） and drain（td） contact thicknesses on top contact（TC） and bottom contact（BC） organic thin film transistors（OTFTs） with a gate in the bottom, using a benchmarked industry standard Atlas 2-D numerical device simulator. The parameters including drive current（Ids）, mobility（μ）, threshold voltage（Vt）and current on-off ratio（ION/IOFF） are analyzed from the device physics point of view on different electrode thicknesses, ranging from infinitesimal to 50 nm, for both top and bottom contact structures. Observations demonstrate that the performance of the BC structure is more affected by scaling of ts=din comparison to its counterpart. In the linear region, the mobility is almost constant at all the values of ts=dfor both structures. However,an increment of 18% and 83% in saturation region mobility is found for TC andBC structures, respectively with scaling down ts=dfrom 50–0 nm. Besides this, the current on-off ratio increases more sharply in the BC structure.This analysis simplifies a number of issues related to the design and fabrication of organic material based devices and circuits.

n-Channel Organic Transistors Processed from Halogen-Free Solvents： Solvent Effect on Thin-Film Morphology and Charge Transport

Non-chlorinated solvents are highly preferable for organic electronic processing due to their environmentally friendly characteristics. Four different halogen-free solvents, tetrafuran, toluene, meta-xylene and 1,2,4-trimethyl- benzene, were selected to fabricate n-channel organic thin film transistors （OTFTs） based on 3-hexylundecyl sub- stituted naphthalene diimides fused with （1,3-dithiol-2-ylidene）malononitrile groups （NDI3HU-DTYM2）. The OTFTs based on NDI3HU-DTYM2 showed electron mobility of up to 1.37 cm2-V-1·s -1 under ambient condition. This is among the highest device performance for n-channel OTFTs processed from halogen-free solvents. The dif- ferent thin-film morphologies, from featureless low crystalline morphology to well-aligned nanofibres, have a great effect on the device performance. These results might shed some light on solvent selection and the resulting solution process for organic electronic devices.

An isoindigo-bithiazole-based acceptor-acceptor copolymer for balanced ambipolar organic thin-film transistors

Balanced carrier transport is observed in acceptor-acceptor (A-A′) type polymer for ambipolar organic thin-film transistors B (OTFTs). It is found that the incorporation of two electron-accepting moieties (BTz and IIG) into a polymer main chain to form A-A′ polymer PIIG-BTz could lower highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels and facilitate good molecular stacking of the polymer. Ambipolar transistor behaviour for PIIG-BTz, with the balanced hole and electron mobilities of 0.030 and 0.022 cm2 V-1 s-1 was observed in OTFT devices, respectively. The study in this work reveals that the utilization of acceptor-acceptor (A-A′) structure in polymer main chain can be a feasible strategy to develop ambipolar polymer semiconductors.