Modern approaches for detection of volatile organic compounds in metabolic studies focusing on pathogenic bacteria:Current state of the art

Pathogenic microorganisms produce numerous metabolites,including volatile organic compounds(VOCs).Monitoring these metabolites in biological matrices(e.g.,urine,blood,or breath)can reveal the presence of specific microorganisms,enabling the early diagnosis of infections and the timely implementation of tar-geted therapy.However,complex matrices only contain trace levels of VOCs,and their constituent com-ponents can hinder determination of these compounds.Therefore,modern analytical techniques enabling the non-invasive identification and precise quantification of microbial VOCs are needed.In this paper,we discuss bacterial VOC analysis under in vitro conditions,in animal models and disease diagnosis in humans,including techniques for offline and online analysis in clinical settings.We also consider the advantages and limitations of novel microextraction techniques used to prepare biological samples for VOC analysis,in addition to reviewing current clinical studies on bacterial volatilomes that address inter-species in-teractions,the kinetics of VOC metabolism,and species-and drug-resistance specificity.

Identification of breath volatile organic compounds to distinguish pancreatic adenocarcinoma,pancreatic cystic neoplasm,and patients without pancreatic lesions

BACKGROUND Volatile organic compounds(VOCs)are a promising potential biomarker that may be able to identify the presence of cancers.AIM To identify exhaled breath VOCs that distinguish pancreatic ductal adenocar-cinoma(PDAC)from intraductal papillary mucinous neoplasm(IPMN)and healthy volunteers.METHODS We collected exhaled breath from histologically proven PDAC patients,radiological diagnosis IPMN,and healthy volunteers using the ReCIVA®device between 10/2021-11/2022.VOCs were identified by thermal desorption-gas chromatography/field-asymmetric ion mobility spectrometry and compared between groups.RESULTS A total of 156 participants(44%male,mean age 62.6±10.6)were enrolled(54 PDAC,42 IPMN,and 60 controls).Among the nine VOCs identified,two VOCs that showed differences between groups were dimethyl sulfide[0.73 vs 0.74 vs 0.94 arbitrary units(AU),respectively;P=0.008]and acetone dimers(3.95 vs 4.49 vs 5.19 AU,respectively;P<0.001).After adjusting for the imbalance parameters,PDAC showed higher dimethyl sulfide levels than the control and IPMN groups,with adjusted odds ratio(aOR)of 6.98(95%CI:1.15-42.17)and 4.56(1.03-20.20),respectively(P<0.05 both).Acetone dimer levels were also higher in PDAC compared to controls and IPMN(aOR:5.12(1.80-14.57)and aOR:3.35(1.47-7.63),respectively(P<0.05 both).Acetone dimer,but not dimethyl sulfide,performed better than CA19-9 in PDAC diagnosis(AUROC 0.910 vs 0.796).The AUROC of acetone dimer increased to 0.936 when combined with CA19-9,which was better than CA19-9 alone(P<0.05).CONCLUSION Dimethyl sulfide and acetone dimer are VOCs that potentially distinguish PDAC from IPMN and healthy participants.Additional prospective studies are required to validate these findings.

Towards green asphalt materials with lower emission of volatile organic compounds: A review on the release characteristics and its emission reduction additives

Recently, researchers in the road field are focusing on the development of green asphalt materials with loweremission of volatile organic compounds (VOCs). The characterization methodology of asphalt VOCs and theinfluencing factors on VOCs release have always been the basic issue of asphalt VOCs emission reduction research.Researchers have proposed a variety of asphalt VOCs characterization methodologies, which also have mutuallyirreplaceable characteristics. Asphalt VOCs volatilization is affected by many factors. In this study, asphalt VOCscharacterization methodologies were summarized, including their advantages, disadvantages, characteristics andapplicable requirements. Subsequently, the influencing factors of VOCs release, such as asphalt types and environment conditions, are summarized to provide theoretical support for the emission reduction research. Theclassification and mechanism of newly-development asphalt VOCs emission reduction materials are reviewed. Thereduction efficiencies are also compared to select better materials and put forward the improvement objective ofnew materials and new processes. In addition, the prospects about development of VOCs release mechanism ofasphalt materials during the full life cycle and feasibility research of high-efficiency composite emission reductionmaterials in the future were put forward.

Volatile Organic Compounds (VOCs) in China: Progress and Prospects of Research on Treatment Technologies and Policy Provisions

Volatile organic compounds (VOCs) are an atmospheric pollutant with a boiling point of 50˚C - 260˚C at room temperature and pressure. They are precursors of sulfur dioxide and ozone, which can seriously pollute the atmosphere and endanger human health. After the “14th Five-Year Plan”, VOCs, instead of SO2, became one of the five indicators of China’s atmospheric governance. As a result, the government’s efforts to control VOCs have increased significantly. VOCs governance mustn’t be delayed. This paper provides a comprehensive summary and analysis of VOCs governance, covering the classification of VOCs, analysis of VOC governance technology (with a focus on end-of-pipe governance technology), national policy regulations, current governance shortcomings, and a forward-looking perspective on the future direction of VOCs governance, emphasizing healthy and sustainable development.

Advanced Technologies for Volatile Organic Compound (VOC) Emission Treatment: An Overview

This paper presents a comprehensive overview of various advanced technologies employed in the treatment of volatile organic compounds(VOCs),which are crucial pollutants in industrial emissions.The study explores different methods,including direct combustion,thermal combustion,catalytic combustion,low-temperature plasma purification,photocatalytic purification,membrane separation,and adsorption methods.Each technology is critically analyzed for its operational principles,efficiency,and applicability under different conditions.Special attention is given to adsorption concentration and catalytic combustion parallel method,highlighting its efficiency in treating low-concentration,high-volume VOC emissions.The paper also delves into the advantages and limitations of each method,providing insights into their effectiveness in various industrial scenarios.The study aims to offer a detailed guide for selecting appropriate VOC treatment technologies,contributing to enhanced environmental protection and sustainable industrial practices.

Exhaled volatile organic compounds for diagnosis and monitoring of asthma

The asthmatic inflammatory process results in the generation of volatile organic compounds(VOCs),which are subsequently secreted by the airways.The study of these elements through gas chromatography-mass spectrometry(GC-MS),which can identify individual molecules with a discriminatory capacity of over 85%,and electronic-Nose(e-NOSE),which is able to perform a quick onboard pattern-recognition analysis of VOCs,has allowed new prospects for non-invasive analysis of the disease in an"omics"approach.In this review,we aim to collect and compare the progress made in VOCs analysis using the two methods and their instrumental characteristics.Studies have described the potential of GC-MS and e-NOSE in a multitude of relevant aspects of the disease in both children and adults,as well as differential diagnosis between asthma and other conditions such as wheezing,cystic fibrosis,COPD,allergic rhinitis and last but not least,the accuracy of these methods compared to other diagnostic tools such as lung function,FeNO and eosinophil count.Due to significant limitations of both methods,it is still necessary to improve and standardize techniques.Currently,e-NOSE appears to be the most promising aid in clinical practice,whereas GC-MS,as the gold standard for the structural analysis of molecules,remains an essential tool in terms of research for further studies on the pathophysiologic pathways of the asthmatic inflammatory process.In conclusion,the study of VOCs through GC-MS and e-NOSE appears to hold promise for the noninvasive diagnosis,assessment,and monitoring of asthma,as well as for further research studies on the disease.

Effective technology for processing industrial volatile organic compounds by the atmospheric pressure microwave plasma torch

In this study,we investigated the abatement of volatile organic compounds(VOCs)by the atmospheric pressure microwave plasma torch(AMPT).To study the treatment efficiency of AMPT,we used the toluene and water-based varnish to simulate VOCs,respectively.By measuring the compounds and contents of the mixture gas before/after the microwave plasma process,we have calculated the treatment efficiency of AMPT.The experimental results show that the treatment efficiency of AMPT for toluene with a concentration of 17.32×10^(4) ppm is up to 60 g/kWh with the removal rate of 86%.For the volatile compounds of water-based varnish,the removal efficiency is up to 97.99%.We have demonstrated the higher potential for VOCs removal of the AMPT process.

Adsorptive and catalytic properties in the removal of volatile organic compounds over zeolite-based materials

Volatile organic compounds（VOCs） are a major component in air pollutants and pose great risks to both human health and environmental protection. Currently, VOC abatement in industrial applications is through the use of activated carbons as adsorbents and oxide-supported metals as catalysts. Notably, activated carbons easily adsorb water, which strongly hinders the adsorption of VOCs; conventional oxides typically possess relatively low surface areas and random pores, which effectively influence the catalytic conversion of VOCs. Zeolites, in contrast with activated carbons and oxides, can be designed to have very uniform and controllable micropores, in addition to tailored wettability properties, which can favor the selective adsorption of VOCs. In particular, zeolites with selective adsorptive properties when combined with catalytically active metals result in zeolite-supported metals exhibiting significantly improved performance in the catalytic combustion of VOCs compared with conventional oxide-supported catalysts. In this review, recent developments on VOC abatement by adsorptive and catalytic techniques over zeolite-based materials have been briefly summarized.

Catalytic removal of volatile organic compounds using ordered porous transition metal oxide and supported noble metal catalysts

Most of volatile organic compounds （VOCs） are harmful to the atmosphere and human health. Cata‐lytic combustion is an effective way to eliminate VOCs. The key issue is the availability of high per‐formance catalysts. Many catalysts including transition metal oxides, mixed metal oxides, and sup‐ported noble metals have been developed. Among these catalysts, the porous ones attract much attention. In this review, we focus on recent advances in the synthesis of ordered mesoporous and macroporous transition metal oxides, perovskites, and supported noble metal catalysts and their catalytic oxidation of VOCs. The porous catalysts outperformed their bulk counterparts. This excel‐lent catalytic performance was due to their high surface areas, high concentration of adsorbed oxy‐gen species, low temperature reducibility, strong interaction between noble metal and support and highly dispersed noble metal nanoparticles and unique porous structures. Catalytic oxidation of carbon monoxide over typical catalysts was also discussed. We made conclusive remarks and pro‐posed future work for the removal of VOCs.

Characterization and Source Apportionment of Volatile Organic Compounds in Urban and Suburban Tianjin, China

Tianjin is the third largest megacity and the fastest growth area in China,and consequently faces the problems of surface ozone and haze episodes.This study measures and characterizes volatile organic compounds （VOCs）,which are ozone precursors,to identify their possible sources and evaluate their contribution to ozone formation in urban and suburban Tianjin,China during the HaChi （Haze in China） summer campaign in 2009.A total of 107 species of ambient VOCs were detected,and the average concentrations of VOCs at urban and suburban sites were 92 and 174 ppbv,respectively.Of those,51 species of VOCs were extracted to analyze the possible VOC sources using positive matrix factorization.The identified sources of VOCs were significantly related to vehicular activities,which specifically contributed 60％ to urban and 42％ to suburban VOCs loadings in Tianjin.Industrial emission was the second most prominent source of ambient VOCs in both urban and suburban areas,although the contribution of industry in the suburban area （36％） was much higher than that at the urban area （16％）.We conclude that controlling vehicle emissions should be a top priority for VOC reduction,and that fast industrialization and urbanization causes air pollution to be more complex due to the combined emission of VOCs from industry and daily life,especially in suburban areas.

Measurement of in-vehicle volatile organic compounds under static conditions

The types and quantities of volatile organic compounds （VOCs） inside vehicles have been determined in one new vehicle and two old vehicles under static conditions using the Thermodesorber-Gas Chromatograph/Mass Spectrometer （TD-GC/MS）. Air sampling and analysis was conducted under the requirement of USEPA Method TO-17. A room-size, environment test chamber was utilized to provide stable and accurate control of the required environmental conditions （temperature, humidity, horizontal and vertical airflow velocity, and background VOCs concentration）. Static vehicle testing demonstrated that although the amount of total volatile organic compounds （TVOC） detected within each vehicle was relatively distinct （4940 μg/m^3 in the new vehicle A, 1240 μg/m^3 in used vehicle B, and 132 μg/m^3 in used vehicle C）, toluene, xylene, some aromatic compounds, and various C7-C12 alkanes were among the predominant VOC species in all three vehicles tested. In addition, tetramethyl succinonitrile, possibly derived from foam cushions was detected in vehicle B. The types and quantities of VOCs varied considerably according to various kinds of factors, such as, vehicle age, vehicle model, temperature, air exchange rate, and environment airflow velocity. For example, if the airflow velocity increases from 0.1 m/s to 0.7 m/s, the vehicle＇s air exchange rate increases from 0.15 h^-1 to 0.67 h^-1, and in-vehicle TVOC concentration decreases from 1780 to 1201 μg/m^3.

Adsorption onto Activated Carbon Fiber Cloth and Electrothermal Desorption of Volatile Organic Compound(VOCs):A Specific Review

A general research program, focusing on activated carbon fiber cloths （ACFC） and felt for environmental protection was performed. The objectives were multiple： （i） a better understanding of the adsorption mecha- nisms of these kinds of materials; （ii） the specification and optimization of new processes using these adsorbents; （iii） the modeling of the adsorption of organic pollutants using both the usual and original approaches; （iv） applications of ACFC in industrial processes. The general question was： how can activated carbon fiber cloths and felts be used in air treatment processes for the protection of environment. In order to provide an answer, different approaches were adopted. The materials （ACFC） were characterized in terms of macro structure and internal porosity. Specific studies were performed to get the air flow pattern through the fabrics. Head loss data were generated and modeled as a fi.mction of air velocity. The performances of ACF to remove volatile organic compounds （VOCs） were approached with the adsorption isotherms and breakthrough curves in various operating conditions. Regenera- tion by Joule effect shows a homogenous heating of adsorber modules with rolled or pleated layers. Examples of industrial developments were presented showing an interesting technology for the removal of VOCs, such as dichloromethane, benzene, isopropyl alcohol and toluene, alone or in a complex mixture.

Release of volatile organic compounds during bio-drying of municipal solid waste

Three treatments were tested to investigate the release concentrations of volatile organic compounds （VOCs） during the bio-drying of municipal solid waste （MSW） by the aerobic and combined hydrolytic-aerobic processes.Results showed that VOCs were largely released in the first 4 days of bio-drying and the dominant components were：dimethyl disulfide,dimethyl sulfide,benzene,2-butanone,limonene and methylene chloride.Thus,the combined hydrolytic-aerobic process was suggested for MSW bio-drying due to fewer aeration quantities in this phase when compared with the aerobic process,and the treatment strategies should base on the key properties of these prominent components.Malodorous sulfur compounds and terpenes were mainly released in the early phase of bio-drying,whereas,two peaks of release concentrations appeared for aromatics and ketones during bio-drying.Notably,for the combined hydrolytic-aerobic processes there were also high concentrations of released aromatics in the shift from hydrolytic to aerobic stages.High concentrations of released chlorinateds were observed in the later phase.For the VOCs produced during MSW bio-drying,i.e.,malodorous sulfur compounds,terpenes and chlorinateds,their release concentrations were mainly determined by production rates;for the VOCs presented initially in MSW,such as aromatics,their transfer and transport in MSW mainly determined the release concentrations.

Adsorption of volatile organic compounds on three activated carbon samples:Effect of pore structure

To investigate the influence of the activated carbon pore structure on the adsorption of volatile organic compounds （VOCs）, three commercial activated carbon samples were chosen. The fixed-bed thermostatic adsorption experiments were conducted under certain conditions, where toluene, acetone, and 1, 2-dichloroethane acted as adsorbents. Then, the incidence relation between the experimental results and the activated carbon pore structure was analyzed. After that, the results of the correlation analysis were verified in accordance with fractal theory and adsorption characteristic curve analysis. The results show that the pore diameter gradient is helpful for strengthening the intemal diffusion. Under the same condition, the adsorption of organic gases tends to be selective, and the positions of toluene, acetone and 1, 2-dichloroethane adsorbed on the activated carbon are mainly in the ranges of 1.27-1.49 nm, 0.67-0.84 nm and 1.39-1.75 nm, respectively. The relationship between adsorption capacity and activated carbon pore volume can accurately explain the spreading process of the adsorbents in the activated carbon.

Emissions of volatile organic compounds from heated needles and twigs of Pinus pumila

A study was conducted to explore the mechanism that emissions of volatile organic compounds（VOC） from heated needles and twigs（200°C,within 15 min） of Pinus pumila affect fire behaviours using the technology of Thermal Desorption-Gas Chromatography-Mass Spectrometry（TD-GC-MS）.The results indicated that the main components of VOC from heated needles and twigs are terpenoids.Most of these terpenoids are monoterpenes.Terpenoids account for 72.93% for the needles and 92.40% for the twigs of the total VOC,and their emission ratios are 61.200 μg·g-1 and 217.060 μg·g-1 respectively.Heated twigs can emit more terpenoids than heated needles because twigs had more volatile oils than needles.In actual fires,these large amounts of terpenoid emissions,especially the monoterpene emissions,have strong effects on fire behaviors that are not only in the initial stage but also in the fast propagation stage of fires.These flammable gases are capable of causing violent combustion and creating crown fires.In addition,if these gases accumulate in an uneven geographical area,there will be a possible for eruptive fires and/or fires flashover to occur.

Analyzing Method on Biogenic Volatile Organic Compounds

In order to analyze biogenic volatile organic compounds in the atmosphere, an automated gas chromatography is developed and employed at the laboratory of National Center for Atmospheric Research (NCAR) during January to July, 2000. A small refrigerator was used so as to remove water in the air sample from gas line, and get accurate concentrations of volatile organic compounds. At 5°C, good water removing efficiency can be obtained at controlled flow rate. Air samples were collected around the building of Mesa Lab. of NCAR and analyzed by this gas chromatography system. This paper reports this gas chromatography system and results of air samples. The experimental results show that this gas chromatography system has a good reproducibility and stability, and main interesting volatile organic compounds such as isoprene, monoterpenes have an evident diurnal variation.

Differential volatile organic compounds in royal jelly associated with different nectar plants

The aim of this work was to distinguish volatile organic compound（VOC） profiles of royal jelly（RJ） from different nectar plants. Headspace solid-phase microextraction（HS-SPME） was used to extract VOCs from raw RJ harvested from 10 nectar plants in flowering seasons. Qualitative and semi-quantitative analysis of VOCs extracts were performed by gas chromatography-mass spectrometry（GC-MS）. Results showed that VOC profiles of RJ from the samples were rich in acid, ester and aldehyde compound classes, however, contents of them were differential, exemplified by the data from acetic acid, benzoic acid methyl ester, hexanoic acid and octanoic acid. As a conclusion, these four VOCs can be used for distinguishing RJ harvested in the seasons of different nectar plants.

Cyclodextrin Polymer Films Optical Waveguide Sensor for Volatile Organic Gas Detection

A sensitive optical waveguide（OWG） sensor which can be used to detect volatile organic compounds（VOCs） was presented.The sensing device（element） was fabricated by means of the immobilization of polyvinyl pyrrolidone（PVP）-cyclodextrin（CD） composite film over a single-mode potassium ion exchanged glass OWG via spin-coating method.The sensor shows higher response to styrene gas than to other VOCs and displays a linear response to styrene gas in a range of 1―1000 μL/L.

A mini-review on the modeling of volatile organic compound adsorption in activated carbons: Equilibrium, dynamics, and heat effects

The research on the adsorption equilibria,kinetics,and increase in process temperature of the volatile organic compound(VOC)adsorption in porous materials ensures safe production,thereby reducing production costs and improving separation efficiency.Therefore,it is critical in predicting the entire adsorption process based on minimal or no experimental input of the adsorbate and adsorbent.We discuss,in this review,the factors that affect the adsorption performance of VOCs in activated carbons,including the adsorption equilibrium,adsorption kinetics,and exotherm during adsorption.Subsequently,the existing prediction models are summarized and compared concerning the adsorption equilibrium,adsorption kinetics,and exothermic process of adsorption.We then propose a new prediction model based on intermolecular interaction and provide an outlook toward the design and manipulation of efficient adsorbents for the VOC system.

Vertical Evolution of Boundary Layer Volatile Organic Compounds in Summer over the North China Plain and the Differences with Winter

The vertical observation of volatile organic compounds(VOCs)is an important means to clarify the mechanisms of ozone formation.To explore the vertical evolution of VOCs in summer,a field campaign using a tethered balloon during summer photochemical pollution was conducted in Shijiazhuang from 8 June to 3 July 2019.A total of 192 samples were collected,23 vertical profiles were obtained,and the concentrations of 87 VOCs were measured.The range of the total VOC concentration was 41-48 ppbv below 600 m.It then slightly increased above 600 m,and rose to 58±52 ppbv at 1000 m.The proportion of alkanes increased with height,while the proportions of alkenes,halohydrocarbons and acetylene decreased.The proportion of aromatics remained almost unchanged.A comparison with the results of a winter field campaign during 8-16 January 2019 showed that the concentrations of all VOCs in winter except for halohydrocarbons were more than twice those in summer.Alkanes accounted for the same proportion in winter and summer.Alkenes,aromatics,and acetylene accounted for higher proportions in winter,while halohydrocarbons accounted for a higher proportion in summer.There were five VOC sources in the vertical direction.The proportions of gasoline vehicular emissions+industrial sources and coal burning were higher in winter.The proportions of biogenic sources+long-range transport,solvent usage,and diesel vehicular emissions were higher in summer.From the surface to 1000 m,the proportion of gasoline vehicular emissions+industrial sources gradually increased.