期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
Optimization for Microbial Degumming of Ramie with Bacillus subtilis DZ_(5) in Submerged Fermentation by Orthogonal Array Design and Response Surface Methodology
1
作者 刘芬 陈杨栋 +2 位作者 朱鹏 曹张军 张兴群 《Journal of Donghua University(English Edition)》 CAS 2023年第5期475-481,共7页
As a kind of natural fiber,ramie fiber has distinctive advantages in textile application,but the application is limited due to the traditional degumming mode.Compared with the traditional degumming process,the microbi... As a kind of natural fiber,ramie fiber has distinctive advantages in textile application,but the application is limited due to the traditional degumming mode.Compared with the traditional degumming process,the microbial degumming process has many advantages.To obtain the optimal conditions for degumming ramie with Bacillus subtilis DZ_(5)(BS DZ_(5)),a combined statistical approach of orthogonal array design(OAD)and response surface methodology(RSM)was used.The influences of initial pH of the bacteria medium,culture temperature,shaking speed,degumming time and inoculum size on submerged fermentation degumming were evaluated by using fractional factorial design.The main factors in the analysis were culture temperature,shaking speed and initial pH.The residual gum mass fraction was used as the optimization index,and the optimal conditions for degumming were determined by central composite design and RSM.Thus with only a limited number of experiments,an optimal ramie microbial degumming condition was found as the culture temperature of 40℃,the initial pH in the culture medium of 8.5,the shaking speed of 205 r/min,the degumming time of 96 h and the inoculum size of 5%.After microbial degumming of ramie under the optimal conditions,there was only 10.6%residual gum by mass in the fiber.In addition,the effective degumming of BS DZ_(5)was also confirmed by a scanning electron microscope(SEM). 展开更多
关键词 microbial degumming OPTIMIZATION RAMIE orthogonal array design(oad) response surface methodology(RSM)
下载PDF
正交设计与均匀设计的初步比较 被引量:21
2
作者 夏之宁 谌其亭 +1 位作者 穆小静 李志良 《重庆大学学报(自然科学版)》 EI CAS CSCD 1999年第5期112-117,共6页
系统研究了试验设计与优化及其在化学中的应用。对广用的正交设计与新颖的均匀设计进行了初步比较,通过有关优化效率及试验次数的比较,指出两者各自的优缺点。作为一项方法或技术,试验设计与优化及其推广应用是项重要工作,宜取长补... 系统研究了试验设计与优化及其在化学中的应用。对广用的正交设计与新颖的均匀设计进行了初步比较,通过有关优化效率及试验次数的比较,指出两者各自的优缺点。作为一项方法或技术,试验设计与优化及其推广应用是项重要工作,宜取长补短,相互促进。 展开更多
关键词 试验设计 优化 正交设计 均匀设计 均衡分散
下载PDF
由二维正投影重建三维实体算法的评述 被引量:14
3
作者 王东泉 《计算机应用与软件》 CSCD 1995年第1期55-60,共6页
近二十年来,由二维正投影视图重建三维实体已成为计算机视觉和CAD/CAM两个不同领域共同关心的一个研究课题。本文综述了1973~1991期间发表的14种算法。文中评述了诸算法的特点,并给出了一个汇总表。
关键词 工程三视图 二维 正投影 三维实体 算法
下载PDF
火龙果砧木与接穗参数的研究 被引量:2
4
作者 戴宏芬 李俊成 +1 位作者 潘玉珠 孙清明 《广东农业科学》 CAS 2021年第1期79-86,共8页
【目的】探究火龙果嫁接技术中砧木与接穗选择的具体参数,以提高嫁接成活率和出芽速度,完善火龙果嫁接技术。【方法】以红水晶6号火龙果为试材,砧木取自不同长度的老熟或绿熟茎蔓,选取砧木在茎蔓中相对位置(砧位)、嫁接方法、接穗芽数... 【目的】探究火龙果嫁接技术中砧木与接穗选择的具体参数,以提高嫁接成活率和出芽速度,完善火龙果嫁接技术。【方法】以红水晶6号火龙果为试材,砧木取自不同长度的老熟或绿熟茎蔓,选取砧木在茎蔓中相对位置(砧位)、嫁接方法、接穗芽数、接穗成熟度等因素,采用混合正交或正交设计进行嫁接试验;根据接穗是否萌芽、出芽时间等分别对砧木长度、质量、砧木质量/长度比、砧木周长、接穗长度等砧穗参数进行多元方差分析。【结果】老熟和绿熟的短茎蔓(可切分两根砧木)嫁接成活率较高,分别为75.0%和87.5%;老熟的长茎蔓(可切分3根砧木)不宜选用单芽接穗;绿熟长茎蔓的中段不宜用做砧木;砧木偏长、砧木质量/长度比较低、成熟度偏嫩、接穗偏长有利于嫁接成活,当砧木较短、较粗、较重、砧木质量/长度比较高、成熟度偏老时接穗萌芽较晚甚至不能萌芽。【结论】初步确定红水晶6号砧木嫁接的基本原则,选取1~2年生茎蔓,优先使用绿熟茎蔓,但避免使用绿熟长茎蔓中段为砧木,砧木长度不低于40 cm,选取生长点附近充实成熟的茎段为接穗,从顶部开始截取接穗进行嫁接,接穗含2芽且长度不低于3 cm,使用平接法为主,嫁接成活率达81.2%,生产实用性较好,对火龙果苗木繁育生产具有参考意义。 展开更多
关键词 火龙果 嫁接 砧木 接穗 成熟度 正交设计
下载PDF
Optimization of the microwave-assisted extraction of phlorotannins from Saccharina japonica Aresch and evaluation of the inhibitory effects of phlorotannin-containing extracts on HepG2 cancer cells 被引量:2
5
作者 何芝洲 陈永顺 +4 位作者 陈永亨 刘浩怀 袁观富 樊亚鸣 陈鲲 《Chinese Journal of Oceanology and Limnology》 SCIE CAS CSCD 2013年第5期1045-1054,共10页
The use of a microwave-assisted extraction(MAE) method for the extraction of phlorotannins from Saccharina japonica Aresch(S.japonica) has been evaluated with particular emphasis on the influential parameters,includin... The use of a microwave-assisted extraction(MAE) method for the extraction of phlorotannins from Saccharina japonica Aresch(S.japonica) has been evaluated with particular emphasis on the influential parameters,including the ethanol concentration,solid/liquid ratio,extraction time,extraction temperature,and microwave power.The MAE procedure was optimized using single-factor design and orthogonal array design(OAD).The content of total phlorotannins in S.japonica was determined using a Folin-Ciocalteu(FC) assay.A maximum total phlorotannin content of 0.644 mg of phloroglucinol equivalent per gram of dry weight plant(mg PGE/g DW) was obtained using the optimized model,which included an ethanol concentration of 55%,solid/liquid ratio of 1:8,extraction time of 25 min,irradiation power of 400 W,and temperature of 60°C.Under similar conditions,the application of a conventional extraction method led to a lower phlorotannin yield of 0.585 mg PGE/g WD.These results demonstrated that the MAE approach provided better results for the extraction of phlorotannins from S.japonica and was a promising technique for the extraction of phenolic compounds from S.japonica and other materials.In addition,screening tests for the inhibitory activity showed that the phlorotannin-containing extracts significantly inhibited the growth of human hepatocellular carcinoma cells(HepG2) by inducing their apoptosis.The morphological changes that occurred during cell apoptosis were characterized using Hoechst33258 staining. 展开更多
关键词 微波辅助提取法 HepG2细胞 人肝癌细胞 提取物 鼠尾藻 粳稻 抑制作用 优化
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部