An on-chip power-on reset circuit with a brown-out detection capability is implemented in a 0. 18 μm CMOS. A pF-order capacitor is charged with a proportional-to-absolute-temperature （PTAT） current from a bandgap r...An on-chip power-on reset circuit with a brown-out detection capability is implemented in a 0. 18 μm CMOS. A pF-order capacitor is charged with a proportional-to-absolute-temperature （PTAT） current from a bandgap reference with limited loop bandwidth and slow start-up feature, to generate a reset signal with high robustness and wide-range supply rise time. An embedded brown- out detector based on complementary voltage-to-current （V-to-I） conversion and current comparison can accurately respond to the brown-out event with high robustness over process and temperature when the supply is lower than 1.5 V and the brown-out duration is longer than 0. 1 ms. The presented design with embedded offset voltage cancellation consumes a quiescent current of 8. 5 μA from a 1. 8 V supply and works over ambient temperature of -40° to 120°.展开更多
Power swing evoked by sudden changes like faults or switching operations will become more and more important for protective relaying, due to the growing load flow in electrical power networks. Unwanted trips of the di...Power swing evoked by sudden changes like faults or switching operations will become more and more important for protective relaying, due to the growing load flow in electrical power networks. Unwanted trips of the distance protection function must be avoided to prevent cascading effects and blackouts in the network. Selective out-of-step-tripping is required to stop unstable power swing and to prevent damage to affected generators. Therefore a reliable method for detection of power swing is presented, which requires no settings for operation. Power swing can be detected from 0.1 Hz up to 10 Hz swing frequency, also during open pole condition and during asymmetrical operation. A blocking logic prevents unselective trips by the distance protection. However, faults that occur during a power swing must be detected and cleared with a high degree of selectivity and dependability. For unstable power swing a flexible out of step tripping function will be proposed. The coordination of power swing detection, distance protection and out of step protection provides a reliable system protection.展开更多
小型棒控压水堆舍弃了可溶硼,并高度依赖控制棒与可燃毒物棒控制堆芯的反应性。为研究控制棒对堆芯关键性能的影响,本文以核动力破冰船用KLT-40模型为对象,以轴向功率偏移、堆芯寿期、燃料利用率与径向功率峰因子为指标,开展长寿期小型...小型棒控压水堆舍弃了可溶硼,并高度依赖控制棒与可燃毒物棒控制堆芯的反应性。为研究控制棒对堆芯关键性能的影响,本文以核动力破冰船用KLT-40模型为对象,以轴向功率偏移、堆芯寿期、燃料利用率与径向功率峰因子为指标,开展长寿期小型棒控压水堆控制棒布置与动作策略设计分析。首先,基于OpenMC程序开发带棒燃耗程序;其次,比较堆芯带控制棒与无控制棒运行时的堆芯寿期等指标;最后,分析不同动作策略对轴向功率偏移等指标的影响。结果表明:控制棒将堆芯寿期从590 EFPDs(等效满功率天,Effective full power days)延长至650~698 EFPDs;低价值棒组优先动作策略使轴向功率偏移程度由−0.69与+0.80分别下降至−0.29与+0.52。因此,要准确计算长寿期压水堆寿期必须采用带控制棒燃耗计算策略,并且通过合理的动作策略能够有效减小控制棒带来的轴向功率偏移。展开更多
Based on the idea of risk evaluation, the existing lightning damage risk assessment methods are reviewed and summarized in this paper. And the power grid lightning damage risk assessment system is established on the b...Based on the idea of risk evaluation, the existing lightning damage risk assessment methods are reviewed and summarized in this paper. And the power grid lightning damage risk assessment system is established on the basis of lightning flashover risk evaluation methodology for transmission lines, and adopts the improved Analytic Hierarchy Process as the core algorithm. It can comprehensively evaluate the risk for transmission lines of regional grid, various sections of a line and each tower of the section, considering much more impact factors, including the running time of line, importance of grades, equipment damage, and the success rate of lightning stroke reclosing and so on. According to the calculation results of the risk assessment of the analytic hierarchy process and lightning flashover risk evaluation, the principles and methods of grade classification for power grid lightning damage risk map are studied, and give typical examples in the paper. It can describe the lightning withstanding ability much more scientifically and provide important references for the manage department of power system.展开更多
This paper uses CT to gain the energy directly from the high-voltage transmission line, to address the problem of power supply for monitoring system in high voltage side of transmission line. The draw-out power coil c...This paper uses CT to gain the energy directly from the high-voltage transmission line, to address the problem of power supply for monitoring system in high voltage side of transmission line. The draw-out power coil can induce voltage from the transmission line, using single-chip microcomputer to analog and output PMW wave to control the charging module, provides a stable 3.4 V DC voltage to the load, and solve the problem of easy saturating of core. The power supply based on this kind of draw-out power coil has undergone the overall testing, and it is verified-showing that it can properly work in a non-saturated status within the current range of 50 - 1000 A, and provide a stable output. The equipment also design protection circuit to improve the reliability to avid the impacts of the impulse current or short-circuit current. It effectively solves the problem of power supply for On-line Monitoring System of Transmission.展开更多
基金Supported by the National Natural Science Foundation of China(6130603761201182)
文摘An on-chip power-on reset circuit with a brown-out detection capability is implemented in a 0. 18 μm CMOS. A pF-order capacitor is charged with a proportional-to-absolute-temperature （PTAT） current from a bandgap reference with limited loop bandwidth and slow start-up feature, to generate a reset signal with high robustness and wide-range supply rise time. An embedded brown- out detector based on complementary voltage-to-current （V-to-I） conversion and current comparison can accurately respond to the brown-out event with high robustness over process and temperature when the supply is lower than 1.5 V and the brown-out duration is longer than 0. 1 ms. The presented design with embedded offset voltage cancellation consumes a quiescent current of 8. 5 μA from a 1. 8 V supply and works over ambient temperature of -40° to 120°.
文摘Power swing evoked by sudden changes like faults or switching operations will become more and more important for protective relaying, due to the growing load flow in electrical power networks. Unwanted trips of the distance protection function must be avoided to prevent cascading effects and blackouts in the network. Selective out-of-step-tripping is required to stop unstable power swing and to prevent damage to affected generators. Therefore a reliable method for detection of power swing is presented, which requires no settings for operation. Power swing can be detected from 0.1 Hz up to 10 Hz swing frequency, also during open pole condition and during asymmetrical operation. A blocking logic prevents unselective trips by the distance protection. However, faults that occur during a power swing must be detected and cleared with a high degree of selectivity and dependability. For unstable power swing a flexible out of step tripping function will be proposed. The coordination of power swing detection, distance protection and out of step protection provides a reliable system protection.
文摘小型棒控压水堆舍弃了可溶硼,并高度依赖控制棒与可燃毒物棒控制堆芯的反应性。为研究控制棒对堆芯关键性能的影响,本文以核动力破冰船用KLT-40模型为对象,以轴向功率偏移、堆芯寿期、燃料利用率与径向功率峰因子为指标,开展长寿期小型棒控压水堆控制棒布置与动作策略设计分析。首先,基于OpenMC程序开发带棒燃耗程序;其次,比较堆芯带控制棒与无控制棒运行时的堆芯寿期等指标;最后,分析不同动作策略对轴向功率偏移等指标的影响。结果表明:控制棒将堆芯寿期从590 EFPDs(等效满功率天,Effective full power days)延长至650~698 EFPDs;低价值棒组优先动作策略使轴向功率偏移程度由−0.69与+0.80分别下降至−0.29与+0.52。因此,要准确计算长寿期压水堆寿期必须采用带控制棒燃耗计算策略,并且通过合理的动作策略能够有效减小控制棒带来的轴向功率偏移。
文摘Based on the idea of risk evaluation, the existing lightning damage risk assessment methods are reviewed and summarized in this paper. And the power grid lightning damage risk assessment system is established on the basis of lightning flashover risk evaluation methodology for transmission lines, and adopts the improved Analytic Hierarchy Process as the core algorithm. It can comprehensively evaluate the risk for transmission lines of regional grid, various sections of a line and each tower of the section, considering much more impact factors, including the running time of line, importance of grades, equipment damage, and the success rate of lightning stroke reclosing and so on. According to the calculation results of the risk assessment of the analytic hierarchy process and lightning flashover risk evaluation, the principles and methods of grade classification for power grid lightning damage risk map are studied, and give typical examples in the paper. It can describe the lightning withstanding ability much more scientifically and provide important references for the manage department of power system.
文摘This paper uses CT to gain the energy directly from the high-voltage transmission line, to address the problem of power supply for monitoring system in high voltage side of transmission line. The draw-out power coil can induce voltage from the transmission line, using single-chip microcomputer to analog and output PMW wave to control the charging module, provides a stable 3.4 V DC voltage to the load, and solve the problem of easy saturating of core. The power supply based on this kind of draw-out power coil has undergone the overall testing, and it is verified-showing that it can properly work in a non-saturated status within the current range of 50 - 1000 A, and provide a stable output. The equipment also design protection circuit to improve the reliability to avid the impacts of the impulse current or short-circuit current. It effectively solves the problem of power supply for On-line Monitoring System of Transmission.
