Optimization of sowing date and seeding rate for high winter wheat yield based on pre-winter plant development and soil water usage in the Loess Plateau,China

Sowing date and seeding rate are critical for productivity of winter wheat(Triticum aestivum L.).A three-year field experiment was conducted with three sowing dates(20 September(SD1),1 October(SD2),and 10 October(SD3)) and three seeding rates(SR67.5,SR90,and SR112.5) to determine suitable sowing date and seeding rate for high wheat yield.A large seasonal variation in accumulated temperature from sowing to winter dormancy was observed among three growing seasons.Suitable sowing dates for strong seedlings before winter varied with the seasons,that was SD2 in 2012–2013,SD3 in 2013–2014,and SD2 as well as SD1 in 2014–2015.Seasonal variation in precipitation during summer fallow also had substantial effects on soil water storage,and consequently influenced grain yield through soil water consumption from winter dormancy to maturity stages.Lower consumption of soil water from winter dormancy to booting stages could make more water available for productive growth from anthesis to maturity stages,leading to higher grain yield.SD2 combined with SR90 had the lowest soil water consumption from winter dormancy to booting stages in 2012–2013 and 2014–2015; while in 2013–2014,it was close to that with SR67.5 or SR112.5.For productive growth from anthesis to maturity stages,SD2 with SR90 had the highest soil water consumption in all three seasons.The highest water consumption in the productive growth period resulted in the best grain yield in both low and high rainfall years.Ear number largely contributed to the seasonal variation in grain yield,while grain number per ear and 1 000-grain weight also contributed to grain yield,especially when soil water storage was high.Our results indicate that sowing date and seeding rate affect grain yield through seedling development before winter and also affect soil water consumption in different growth periods.By selecting the suitable sowing date(1 October) in combination with the proper seeding rate of 90 kg ha–1,the best yield was achieved.Based on these results,we recommend that the current sowing date be delayed from 22 or 23 September to 1 October.

Effect of Heat Stress on Photosynthetic Characteristics of Different Green Organs of Winter Wheat During Grain-filling Stage

Four winter wheat (Triticum aestivum L.) varieties ('JD 8', 'Jing 411','Centurk' and 'Tam 202') were used to study the effect of heat stress on photosynthetic characteristics of flag leaf blade, nag leaf sheath, peduncle, glume, lemma and awn during grain-filling stage. The results showed that heat acclimation during grain-filling stage increased thermotolerance of wheat with significant differences among different green organs. During heat stress, the decreases of the efficiency of primary light energy conversion (F-v/F-m) of PS II and pigment (chlorophyll and carotenoid) content were much slower in peduncle, flag leaf sheath and glume than in nag leaf blade, lemma and ann; and the percentage of decrease in net photosynthetic rate (P-n) of ear was lower than that of the nag leaf blade. The measured photosynthetic parameters (F-v/F-m, P-n and pigment content) of 'JD 8', a relatively heat tolerant variety, declined more slowly than those of the other three varieties during the whole heat stress period.

Effects of Seaweed Bio-organic Fertilizer on Growth and Yield of Winter Wheat

[Objective] This study aimed to investigate the effects of seaweed bio-or- ganic fertilizer on yield and quality of winter wheat. [Method] Seaweed bio-organic fertilizer was applied to leaves of winter wheat according to the dose of 45 kg/hm^2 from jointing stage to maturing stage, and plant height, dry matter accumulation, flag leaf photosynthetic characteristics and grain yield of winter wheat were investigated. [Result] Foliar spraying of seaweed bio-organic fertilizer showed little effect on plant height of winter wheat, thickened stems, promoted dry matter accumulation, in- creased flag leaf photosynthetic rate by 3.16%, and increased yield of winter wheat by 6.85%. [Conclusion] Foliar spraying of seaweed bio-organic fertilizer promoted the intelligent growth, thickened the stems, improved the lodging resistance, significantly increased the panicle weight per plant, and increased the bulk density of winter wheat, as well as improving the physical quality of wheat grain. In addition, foliar spraying of seaweed bio-organic fertilizer promoted the synthesis of chlorophyll and mitigated the decomposition of chlorophyll in winter wheat. Under the background of fertilizer-pesticide double reduction, the test results and data of this study can be promoted in the wheat-growing areas of Shandong Province and even whole China.

“油-稻-稻”三熟制早熟冬油菜氮高效基因型及鉴定指标筛选

【目的】旨在筛选适宜“油-稻-稻”三熟制的氮高效早熟冬油菜基因型及其简易筛选指标。【方法】利用田间小区试验,选用了生育期185 d以下的的适宜“油-稻-稻”三熟制种植的14种早熟冬油菜基因型,进行正常施氮(N_(1))和不施氮(N_(0))处理。根据不同冬油菜基因型氮肥利用率(NUE)的差异,利用树状聚类分析进行分类,形成高、中、低3种氮效率基因型。同时通过逆向溯源的方法,观察分析3种氮效率基因型在不同氮水平条件下的产量构成、主要农艺性状、干物质积累及氮素吸收等方面的表现特征。总结分析出氮高效冬油菜基因型的一些简易判断的指标。【结果】不同氮效率基因型冬油菜在产量形成、主要农艺性状等方面存在显著差异。N1处理下成熟期早熟冬油菜的主要农艺性状的表型值和变异系数基本表现大于N0处理。因此,以N1处理下不同基因型的农艺性状表现作为不同氮效率基因型的鉴别标准。N1处理下,氮高效基因型比氮中效和氮低效基因型产量高、单株角果数多、每角粒数多、株高高、主花序长、一级分枝数多、角果密度高、各部位干物质积累量高、籽粒中氮含量高、氮肥偏生产力、氮肥农学效率、氮肥生理利用率和氮收获指数均较高。【结论】沣油737是适合南方“油-稻-稻”三熟制的氮高效早熟冬油菜;正常施氮条件下,成熟期较多的单株角果数与每角粒数,以及较高株高是判断早熟冬油菜氮高效基因型的简易指标。

Monitoring Winter Wheat Freeze Injury Using Multi-Temporal MODIS Data

Freeze injury is an usual disaster for winter wheat in Shanxi Province, China, and monitoring freeze injury is of important economic significance. The aim of this article is to monitor and analyze the winter wheat freeze injury using remote sensing data, to monitor the occurrence and spatial distribution of winter wheat freeze in time, as well as the severity of the damage. The winter wheat freeze injury was monitored using multi-temporal moderate-resolution imaging spectroradiometer （MODIS） data, combined with ground meteorological data and field survey data, the change of normalized difference vegetation index （NDVI） before and after freeze injury was analyzed, as well as the effect of winter wheat growth recovery rate on yield. The results showed that the NDVI of winter wheat decreased dramatically after the suffering from freeze injury, which was the prominent feature for the winter wheat freeze injury monitoring. The degrees of winter wheat freeze injury were different in the three regions, of which, Yuncheng was the worst severity and the largest freeze injury area, the severity of freeze injury correlates with the breeding stage of the winter wheat. The yield of winter wheat showed positive correlation with its growth recovery rate （r=0.659^＊＊ which can be utilized to monitor the severity of winter wheat freeze injury as well as its impact on yield. It can effectively monitor the occurrence and severity of winter wheat freeze injury using horizontal and vertical profile distribution and growth wheat freeze injury in Shanxi Province. recovery rate, and provide a basis for monitoring the winter

A Dynamic Knowledge Model for Design of Suitable Sowing Date and Sowing Rate in Winter Wheat

Based on research concerning dynamic relationships of winter wheat growth to environments and production conditions, a winter wheat model for selecting suitable sowing date, population density and sowing rate under different varieties, spatial and temporal environments was developed. Case studies on sowing date with the data sets of five different eco-sites, three climatic years and soil fertility levels, and on population density and sowing rate with the data sets of two different variety types, three different soil types, soil fertility levels, sowing dates and grain yield levels indicate a good model performance for decision-making.

Process for improving the ladle free- opening rate for high aluminum steel in continuous casting

Steel 20Mn23AlV is a type of high aluminum steel with a very low ladle free-opening rate. The aluminum composition of 20Mn23AlV ranges from 1.6% to 2.45% ,which is significantly higher than other types of steel. According to the real condition of 40 t ladle in steel-making plant of Baosteel Special Steel Company, previous works show that the key factors affecting the ladle free-opening rate of high aluminum steel in continuous casting are：sand material, accessories baking, ladle nozzle cleaning, the process and amount of adding sand, and the rate of argon stirring during refining. Therefore, improving the ladle filler sand quality, baking all of the raw materials, controlling the addition of ladle filler sand, cleaning the ladle nozzle, and optimizing argon stirring during the refining process can resolve the problem of a low ladle free-opening rate of high aluminum steel caused by the long ladle time of liquid steel.

Identifying the critical phosphorus balance for optimizing phosphorus input and regulating soil phosphorus effectiveness in a typical winter wheat-summer maize rotation system in North China

Phosphorus(P)is a nonrenewable resource and a critical element for plant growth that plays an important role in improving crop yield.Excessive P fertilizer application is widespread in agricultural production,which not only wastes phosphate resources but also causes P accumulation and groundwater pollution.Here,we hypothesized that the apparent P balance of a crop system could be used as an indicator for identifying the critical P input in order to obtain a high yield with high phosphorus use efficiency(PUE).A 12-year field experiment with P fertilization rates of 0,45,90,135,180,and 225 kg P_(2)O_(5)ha^(-1)was conducted to determine the crop yield,PUE,and soil Olsen-P value response to P balance,and to optimize the P input.Annual yield stagnation occurred when the P fertilizer application exceeded a certain level,and high yield and PUE levels were achieved with annual P fertilizer application rates of 90-135 kg P_(2)O_(5)ha^(-1).A critical P balance range of 2.15-4.45 kg P ha^(-1)was recommended to achieve optimum yield with minimal environmental risk.The critical P input range estimated from the P balance was 95.7-101 kg P_(2)O_(5)ha^(-1),which improved relative yield(>90%)and PUE(90.0-94.9%).In addition,the P input-output balance helps in assessing future changes in Olsen-P values,which increased by 4.07 mg kg^(-1)of P for every 100 kg of P surplus.Overall,the P balance can be used as a critical indicator for P management in agriculture,providing a robust reference for limiting P excess and developing a more productive,efficient and environmentally friendly P fertilizer management strategy.

Effect of varying normal stress on stability and dynamic motion of a spring-slider system with rate- and state-dependent friction

Incorporating rate and state friction laws, stability of linearly stable （i.e., with stiffness greater than the critical value） spring-slider systems subjected to triggering perturbations was analyzed under variable normal stress condition, and comparison was made between our results and that of fixed normal stress cases revealed in previous studies. For systems associated with the slip law, the critical mag- nitude of rate steps for triggering unstable slips are found to have a similar pattern to the fixed normal stress case, and the critical velocity steps scale with a/（b - a） when k = kcr for both cases. The rate-step boundaries for the variable normal stress cases are revealed to be lower than the fixed normal stress case by 7 %-16 % for a relatively large ct = 0.56 with （b - a）/a ranging from 0.25 to 1, indicating easier triggering under the variable normal stress condition with rate steps. The difference between fixed and variable normal stress cases decreases when the α value is smaller. In the same slip- law-type systems, critical displacements to trigger instability are revealed to be little affected by the variable normal stress condition. When k 〉 kcr（V,）, a spring-slider system with the slowness law is much more stable than with the slip law,suggesting that the slowness law fits experimental data better when a single state variable is adopted. In stick-slip motions, the variable normal stress case has larger stress drops than the constant normal stress case. The variable normal stress has little effect on the range of slip velocity in systems associated with the slowness law, whereas systems associated with the slip law have a slowest slip velocity immensely smaller than the fixed normal stress case, by ~ 10 orders of magnitude.

Reconstruction of Sub-Decadal Winter Half-Year Temperature during 1651-2010 for the North China Plain Using Records of Frost Date

We extracted 374 pieces of records of frost date from historical documents. Using these records, we reconstructed winter half-year (October to next April) temperature series, with a resolution of 5-year, for the North China Plain during 1651-2010. The results show that the temperature changes in the North China Plain were divided into four phases. With the reference period of 1951-1980, two cold phases, 1651-1700 and 1781-1900, have cold anomaly of 0.83°C and 0.60°C respectively. However, between the two cold phases, 1701-1780 was a relative warm phase with the cold anomaly of 0.36°C referring to the mean of 1951-1980. After the 1900, the climate came into a warm phase. The mean temperature of 1901-2010 was 0.11°C higher than the mean of 1951-1980. During 1651-2010, the 1996-2000 is the warmest 5-year with the warm anomaly of 1.25°C than that of the reference period of 1951-1980.

Effect of cooling rate on evolution of superconducting phases during decomposition and recrystallization of (Bi,Pb)-2223 core in Ag-sheathed tape

The reformation of (Bi,Pb)-2223 from the liquid or melt is very important for a melting process of (Bi,Pb)-2223 tape. By combination of quenching experiment with X-ray diffraction (XRD) analysis, the effect of cooling rate on the evolution of three superconducting phases in the (Bi,Pb)-2223 core of Ag-sheathed tape was investigated. The results show that (Bi,Pb)-2223 reformation from the melt seems to experience different routes during slowly cooling at different rates. One is that (Bi,Pb)-2223 phase reformed directly from the melt, and no Bi-2212 participate in this process. The other is that (Bi,Pb)-2223 is converted from the intermediate product, Bi-2212, which formed from the melt during the first cooling stage. Due to the inherent sluggish formation kinetics of (Bi,Pb)-2223 from Bi-2212, only partial (Bi,Pb)-2223 can finally be reformed with the second route.

Plastic Flow Modeling of Ti-5 Al-2 Sn-2 Zr-4 Mo-4 Cr Alloy at Elevated Temperatures and High Strain Rates

The true stress-sWain relationships of Ti-5A1-2Sn-2Zr-4Mo-4Cr（TC17） alloy with a wide range of strain rates were investigated by tmiaxial quasi-static and dynamic compression tests, respectively. Quasi- static compression tests were carried out with Instron 8874 test machine, while dynamic compression tests were performed with the split Hopkinson pressure bar （SHPB） which was installed with heating device and synchro- assembly system. The dynamic mechanical behaviors tests of TC17 were carded out from room temperature to 800 ℃ at intervals of 200 ℃ and at high sWain rates （5 500-1 9200 s-l）. The stress-strain curves considering temperature-sWain rate coupling actions were obtained. The Johnson-Cook constitutive model was developed through data fitting of the stress-sWain curves. The material constants in the developed constitutive model can be determined using isothermal and adiabatic stress-strain curves at different strain rates. The Johnson-Cook constitutive model provided satisfied prediction of the plastic flow stress for TC17 alloy.

Performance Analysis of Outage Probability and Error Rate of Square M-QAM in Mobile Wireless Communication Systems over Generalized α-μ Fading Channels with Non-Gaussian Noise

This paper derives new and exact closed-form expressions for the average symbol error rate(SER) of square M-ary quadrature amplitude modulation(M-QAM) in wireless communication systems over theα-μfading channels subject to an additive non-Gaussian noise. The obtained expressions take into account static and mobile wireless receivers. In addition, a closed-form expression for the outage probability in mobile networks is obtained. Please note that all derived expressions in this paper a valid for integer and non-integer values of the fading parameters. Analytical results are presented to study the impact of noise shaping parameter, severity of fading, and mobility on the average SER. Monte-Carlo simulations results are also provided to validate the accuracy of the analytical results.

A Diagnostic Analysis of Winter Atmospheric Circulation during the 1982-1983 ENSO Event

In this paper, the winter atmospheric circulation, the convection along the equator and their variations of 1982 and 1983 are investigated. It is suggested that there was a well organized three dimensional structure of anomalies of the atmospheric circulations during 1982 winter which may be related to the variations of the convection in the equatorial region.

NO_3^-/NH_4^+ ratios affect plant growth, chlorophyll content,respiration rate, and morphological structure in Malus hupehensis seedlings

Malus hupehensis （Pamp.） Rehd. is a widely cultivated rootstock in China. We studied the effect of three NO3-/NH4＋ ratios （100/0, 50/50, and 0/100, molar basis） at total nitrogen （N） concentration of 8 mmoL L-1 in a nutrient solution on M. hupehensis seedlings. Plant biomass, NO3- and NH4＋concentrafion, chlorophyll con- tent, respiratory rate, and cellular structure were investi- gated. M. hupehensis seedlings at the NO3-/NH4＋ ratio of 50/50 had the highest level of fresh weight, dry weight, shoot length, and chlorophyll （a, b, and a ＋ b） content, but the lowest respiration rate in the leavesand roots. In addition, thickness and numbers of palisade and spongy tissue cells of the leaves were greater with this treatment than with other treatments. At the NO3-/NH4＋ ratio of 100/0, the leaves and roots had higher NO3- concentration and lower NH4＋ concentration. However, the opposite trend occurred at the NO3-/NH4＋ ratio of 0/100. Chloro- phyll （a, b, and a ＋ b） content was lowest at the NO3-/NH4＋ ratio of 100/0 than at the other ratios. At the NO3-/ NH4＋ ratio of 0/100, oxygen （02） consumption increased in the leaves and roots, and irregular epidermis and cortex cells were observed in the root apical meristematic and mature region. Our results indicated that the NO3-INH4＋ ratio at 50/50 was suitable for growth of M. hupehensis seedling to achieve the highest biomass production and efficiency.

THE BROAD-BAND CCD PHOTOMETRY AND DUST PRODUCTION RATES OF COMET HALE-BOPP

Based upon broad-band CCD observation data of comet Hale-Bopp obtained by a 60cm telescope at Xinglong Station of Beijing Astronomical Observatory during March-August, 1996, the photometric results of comet Hale-Bopp are reported. Using the photometric results, the dust production rate, radius and mass of nucleus of comet Hale-Bopp are estimated as follows: dM/dt～1.5×10 5 kgs -1, R n～35.5km, and M n～5.65×10 16kg.

Diagnostic performance of dynamic contrast-enhanced magnetic resonance imaging parameters and serum tumor markers in rectal carcinoma prognosis

BACKGROUND Rectal carcinoma(RC),one of the most common malignancies globally,presents an increasing incidence and mortality year by year,especially among young people,which seriously affects the prognosis and quality of life of patients.At present,dynamic contrast-enhanced magnetic resonance imaging(DCE-MRI)parameters and serum carbohydrate antigen 19-9(CA19-9)and CA125 Levels have been used in clinical practice to evaluate the T stage and differentiation of RC.However,the accuracy of these evaluation modalities still needs further research.This study explores the application and value of these methods in evaluating the T stage and differentiation degree of RC.AIM To analyze the diagnostic performance of DCE-MRI parameters combined with serum tumor markers(TMs)in assessing pathological processes and prognosis of RC patients.METHODS A retrospective analysis was performed on 104 RC patients treated at Yantai Yuhuangding Hospital from May 2018 to January 2022.Patients were categorized into stages T1,T2,T3,and T4,depending on their T stage and differentiation degree.In addition,they were assigned to low(L group)and moderate-high differentiation(M+H group)groups based on their differentiation degree.The levels of DCE-MRI parameters and serum CA19-9 and CA125 in different groups of patients were compared.In addition,the value of DCE-MRI parameters[volume transfer constant(Ktrans),rate constant(Kep),and extravascular extracellular volume fraction(Ve)in assessing the differentiation and T staging of RC patients was discussed.Furthermore,the usefulness of DCE-MRI parameters combined with serum CA19-9 and CA125 Levels in the evaluation of RC differentiation and T staging was analyzed.RESULTS Ktrans,Ve,CA19-9 and CA125 were higher in the high-stage group and L group than in the low-stage group and M+H Group,respectively(P<0.05).The areas under the curve(AUCs)of the Ktran and Ve parameters were 0.638 and 0.694 in the diagnosis of high and low stages,respectively,and 0.672 and 0.725 in diagnosing moderate-high and low differentiation,respectively.The AUC of DCE-MRI parameters(Ktrans+Ve)in the diagnosis of high and low stages was 0.742,and the AUC in diagnosing moderate-high and low differentiation was 0.769.The AUCs of CA19-9 and CA-125 were 0.773 and 0.802 in the diagnosis of high and low stages,respectively,and 0.834 and 0.796 in diagnosing moderate-high and low differentiation,respectively.Then,we combined DCE-MRI(Ktrans+Ve)parameters with CA19-9 and CA-125 and found that the AUC of DCE-MRI parameters plus serum TMs was 0.836 in the diagnosis of high and low stages and 0.946 in the diagnosis of moderate-high and low differentiation.According to the Delong test,the AUC of DCE-MRI parameters plus serum TMs increased significantly compared with serum TMs alone in the diagnosis of T stage and differentiation degree(P<0.001).CONCLUSION The levels of the DCE-MRI parameters Ktrans and Ve and the serum TMs CA19-9 and CA125 all increase with increasing T stage and decreasing differentiation degree of RC and can be used as indices to evaluate the differentiation degree of RC in clinical practice.Moreover,the combined evaluation of the above indices has a better effect and more obvious clinical value,providing important guiding importance for clinical condition judgment and treatment selection.

High Strain Rate Induced Plasticity-increasing of Metallic Materials under Tension

The effect of strain rate on plasticity has been Investigat-ed for three metallic materials with dynamic tension tech-nique. A phenomenon of high strain induced plasticity -increasing was found for tested materials. The elongation of quenched 30CrMnSiNi2A is 14. 5% under 40 m/s loading rate which is more than two times of the 7 % un-der 0. 5 mm/min. This typic high strain rate induced plasticity - Increasing phenomenon is associated with adiabatic heating, strain twinning and suppression of strain - induced - phase transformation.

“薯-稻-稻”轮作模式下双季稻施肥减量研究

针对冬种马铃薯收获后土壤肥力残留较多,早晚稻施肥量大,造成肥料浪费和利用率低下的现状,开展田间试验,研究"薯-稻-稻"轮作模式下早晚双季稻施肥减量对其农艺性状、产量、肥料利用率和种植效益等的影响。结果表明,当早、晚双季稻的施肥量减少至农民习惯施肥量(T1)的80%(即T2)时,对水稻产量、品质和种植效益及肥料利用率影响不大;但当施肥量减少至农民习惯肥量(T1)的60%(即T3)时,对双季水稻产量、品质和种植效益及肥料利用率影响较大。因此,建议在冬种马铃薯收获后的田块种植早、晚双季稻,其合理施肥量应减少至农民习惯施肥量的80%。

外源6-BA对小麦种子萌发及越冬期植株冻害的缓解作用

为了解外源6-BA缓解越冬期间冬小麦植株冻害的生理机制,以冬小麦品种东农冬麦1号和济麦22为材料,研究了不同浓度外源6-BA处理对冬小麦种子萌发及越冬期间植株膜质过氧化及内源激素的影响。结果表明,外源6-BA提高了两个小麦品种的种子发芽势,且对东农冬麦1号影响明显大于济麦22;10μmol·L-1 6-BA处理显著提高了东农冬麦1号的发芽率,减缓其分蘖节的膜质过氧化。外源6-BA增加了低温后期(12月19日即温度低于-25℃时)济麦22的叶片相对电导率、低温中后期11月4日后即温度低于-10℃时东农冬麦1号分蘖节中ABA含量和ABA/GA值,降低了两个品种植株GA含量及低温中后期东农冬麦1号叶片中ABA含量和ABA/GA值,而对济麦22植株内源激素没有显著影响。说明在越冬期间10μmol·L-16-BA处理可促进种子发芽,调节分蘖节内源激素和膜脂过氧化作用,提高东农冬麦1号抵御低温的能力。