F-structure model of overlying strata for dynamic disaster prevention in coal mine

The rupture and movement scope of overlying strata upon the longwall mining face increased sharply as the exploitation scale and degree growing recently,and the spatial structure formed by fractured strata became much more complex.The overlying strata above the working face and adjacent gobs would affect each other and move cooperatively because small pillar can hardly separate the connection of overlying strata between two workfaces,which leads to mining seismicity in the gob and induces rockburst disaster that named spatial structure instability rockburst in this paper.Based on the key stratum theory,the F-structure model was established to describe the overlying strata characteristic and rockburst mechanism of workface with one side of gob and the other side un-mined solid coal seam.The results show that F-structure in the gob will re-active and loss stability under the influence of neighboring mining,and fracture and shear slipping in the process of instability is the mechanism of the seismicity in the gob.The F-structure was divided into two categories that short-arm F and long-arm F structure based on the state of strata above the gob.We studied the underground pressure rules of different F-structure and instability mechanism,thus provide the guide for prevention and control of the F-structure spatial instability rockburst.The micro-seismic system is used for on-site monitoring and researching the distribution rules of seismic events,the results confrmed the existence and correct of F-spatial structure.At last specialized methods for prevention seismicity and rockburst induced by F-structure instability are proposed and applied in Huating Coal Mine.

Primary study on the ＂θ＂ letter type overlying multi-strata spatial structure of mining face surrounded by mined areas

The overlying strata spatial structure academic viewpoint thinks the primary factor which controls the stope presses is the overlying strata spatial structure movement; the spatial structure above the later period coal pillar surrounded by mined areas is the most complex overlying strata spatial structure and study on its evolution law has the important realistic project significance for strata movement control and production safety. The existing research results indicate that the special structure of the first working face of the mine begins to develop lengthways from stratum movement above mined areas and extends level in the exploitation direction. From existing overlying strata spatial structure fundamental research achievement, the spatial structure above the later period coal column surrounded by mined areas have following characteristic： The spatial structure formation is from the top to the lower and from large to small. According to the findings, a formula with the use of rock layer migration angle delta was put forward to estimate isolated island coal column width on which different stratum structure is gonging to form.

A Study on Dual-Load-Zone Model of Overlying Strata andEvolution Law of Mining Stress

The changeable structure and movement law of overlying strata are the maincontributor to the change of mining stress.Starting from the relevant theory of keystratum and particularly based on the theory of mine ground pressure and strata control,this research proposed a new solution to mining stress problems by establishing adual-load-zone stratum structural model.Elastic foundation beam theory was used tosolve the stress of overlying strata of the dual-load-zones with superposition method,which revised the traditional calculation method of mining stress.The abnormal increaseof lead abutment pressure in the mining area was explained effectively,through which theevolution law of mining stress in the case of hard rock was obtained.The results indicatethat mining stress experiences a drastic change within the range of 50 m ahead of the coalwall due to the collapse of main roof;under the influence of main key stratum andinferior key strata,the influence range of lead abutment pressure is extended up toapproximately 120 m in the working face;this remarkable increase can be attributed tothe excessive length of sagging zone.Results from both the dual-load-zone modelexperiment and field measurement demonstrate high consistency.The model can predictthe influence range of abutment pressure effectively and thus guide the safety productionof mining.

Stability of roof structure and its control in steeply inclined coal seams

To improve the effectiveness of control of surrounding rock and the stability of supports on longwall topcoal caving faces in steeply inclined coal seams, the stability of the roof structure and hydraulic supports was studied with physical simulation and theoretical analysis. The results show that roof strata in the vicinity of the tail gate subside extensively with small cutting height, while roof subsidence near the main gate is relatively assuasive. With increase of the mining space, the caving angle of the roof strata above the main gate increases. The characteristics of the vertical and horizontal displacement of the roof strata demonstrate that caved blocks rotate around the lower hinged point of the roof structure, which may lead to sliding instability. Large dip angle of the coal seam makes sliding instability of the roof structure easier.A three-hinged arch can be easily formed above both the tail and main gates in steeply inclined coal seams. With the growth in the dip angle, subsidence of the arch foot formed above the main gate decreases significantly, which reduces the probability of the roof structure becoming unstable as a result of large deformation, while the potential of the roof structure's sliding instability above the tail gate increases dramatically.