Characteristics of Overpressure Systems and Their Significance in Hydrocarbon Accumulation in the Yinggehai and Qiongdongnan Basins,China

Overpressure systems are widely developed in the central depression and paleo-uplift in the Yinggehai and Qiongdongnan basins. They can be divided into three types according to the origin of abnormally high formation pressure in the reservoirs, i.e. the autochthonous, vertically-transmitted and laterally-transmitted types. The autochthonous overpressure system results from rapid disequilibrium sediment loading and compaction. In the allochthonous overpressure system, the increase of fluid pressure in sandstone originates from the invasion of overpressured fluid flowing vertically or laterally through the conduit units. The autochthonous overpressure system occurs in the deep-lying strata of Neogene age in the central depression of the Yinggehai and Qiongdongnan basins. The vertically transmitted overpressure system is developed in the shallow strata of Late Miocene and Pliocene ages in the diapiric zone of the central Yinggehai basin, and the laterally transmitted overpressure system occurs in the Oligocene strata of paleo-uplifts, such as the structure of Ya-211 in the Qiongdongnan basin. The results indicate that the autochthonous overpressure system is generally a closed one, which is unfavorable for the migration and accumulation of hydrocarbons. In the allochthonous overpressure system, hydrocarbon accumulation depends on the relationship between the formation of overpressure systems and the spatial location and duration of hydrocarbon migration. The interval overlying the overpressure system is usually a favorable hydrocarbon accumulation zone if the duration of fluid expulsion coincides with that of hydrocarbon accumulation.

Formation of overpressure system and its relationship with the distribution of large gas fields in typical foreland basins in central and western China

Based on the data of measured formation pressure, drilling fluid density of key exploration wells and calculated pressure by well logging, combined with the analysis of natural gas geological conditions, the characteristics and formation mechanisms of formation fluid overpressure systems in different foreland basins and the relationship between overpressure systems and large-scale gas accumulation are discussed.(1) The formation mechanisms of formation overpressure in different foreland basins are different. The formation mechanism of overpressure in the Kuqa foreland basin is mainly the overpressure sealing of plastic salt gypsum layer and hydrocarbon generation pressurization in deep–ultra-deep layers, that in the southern Junggar foreland basin is mainly hydrocarbon generation pressurization and under-compaction sealing, and that in the western Sichuan foreland basin is mainly hydrocarbon generation pressurization and paleo-fluid overpressure residual.(2) There are three common characteristics in foreland basins, i.e. superimposed development of multi-type overpressure and multi-layer overpressure, strong–extremely strong overpressure developed in a closed foreland thrust belt, and strong–extremely strong overpressure developed in a deep foreland uplift area.(3) There are four regional overpressure sealing and storage mechanisms, which play an important role in controlling large gas fields, such as the overpressure of plastic salt gypsum layer, the overpressure formed by hydrocarbon generation pressurization, the residual overpressure after Himalayan uplift and denudation, and the under-compaction overpressure.(4) Regional overpressure is an important guarantee for forming large gas fields, the sufficient gas source, large-scale reservoir and trap development in overpressure system are the basic conditions for forming large gas fields, and the overpressure system is conducive to forming deep to ultra-deep large gas fields.

Overpressure origins and evolution in deep-buried strata:A case study of the Jurassic Formation,central Junggar Basin,western China

Overpressure is significant to the exploration and exploitation of petroleum due to its influence on hydrocarbon accumulation and drilling strategies.The deep-burial hydrocarbon reservoirs of Jurassic strata in the central Junggar Basin are characterized by intensive overpressure,whose origins are complex and still unclear.In this study,Bowers'method and sonic velocity-density crossplot method based on well logging data were used as a combination for overpressure judgements in geophysics.Furthermore,the corresponding geological processes were analysed in quality and quantity to provide a rational comprehension of the overpressure origins and the model of overpressure evolution and hy-drocarbon accumulation processes.The results showed that hydrocarbon generation in the Jurassic source rocks led to overpressure in the mudstones,while hydrocarbon generation in Permian source rocks led to overpressure in the sandstone reservoirs in Jurassic strata by vertical pressure transfer.The burial and thermal history indicated that the aquathermal effect of pore fluids by temperature increase in deep strata is also an important origin of overpressure,while disequilibrium compaction may not be the dominant cause for the overpressure in deep-buried strata.Furthermore,the continuous tectonic compression in both the north-south and west-east trends from the Jurassic period to the present may also have enhanced the overpressure in deep strata.Meanwhile,the developed faults formed by intensive tectonic compression led to pressure transfer from source rocks to the Jurassic reservoirs.Overpressured geofluids with hydrocarbons migrated to sandstone reservoirs and aggravated the over-pressure in the Jurassic strata.To conclude,the intensive overpressure in the central Junggar Basin is attributed to the combination of multiple mechanisms,including hydrocarbon generation,the aqua-thermal effect,tectonic compression and pressure transfer.Furthermore,the developed overpressure indicated hydrocarbon migration and accumulation processes and the potential of oil and gas reservoirs in deeply buried strata.We hope this study will provide a systematic research concept for overpressure origin analysis and provide guidance for petroleum exploration and exploitation in deep-buried strata.

Experimental and numerical study on protective effect of RC blast wall against air shock wave

Prototype experiments were carried out on the explosion-proof performance of the RC blast wall.The mass of TNT detonated in the experiments is 5 kg and 20 kg respectively.The shock wave overpressure was tested in different regions.The above experiments were numerically simulated,and the simulated shock wave overpressure waveforms were compared with that tested and given by CONWEP program.The results show that the numerically simulated waveform is slightly different from the test waveform,but similar to CONWEP waveform.Through dimensional analysis and numerical simulation under different working conditions,the equation for the attenuation rate of the diffraction overpressure behind the blast wall was obtained.According to the corresponding standards,the degree of casualties and the damage degree of the brick concrete building at a certain distance behind the wall can be determined when parameters are set.The above results can provide a reference for the design and construction of the reinforced concrete blast wall.

Development of Overpressure in the Tertiary Damintun Depression, Liaohe Basin, Northern China

The Damintun depression is one of the four depressions in the Liaohe basin in northern China, and is a rift basin developed in the Paleogene. This paper discusses in detail the characteristics of pressure and fluid potential of the Damintun depression based on a synthesis of the data from boreholes, well tests and seismic surveys. Data from sonic logs, well tests and seismic velocity measurements are used to study the pressure characteristics of the areas. From the sonic log data, shales can be characterized as normally pressured, slightly overpressured or highly overpressured; from the well test data, the pressure-depth gradient in oil-producing intervals implies hydrostatic pressure in general. Most seismic profiles in the Damintun depression are of sufficiently high quality for seismic velocities to be measured. The fluid pressures, excess pressures and pressure coefficients in 47 representative seismic profiles are predicted using formula calculation methods, and further transformed to fluid potenti

Modeling of the whole process of shock wave overpressure of freefield air explosion

The waveform of the explosion shock wave under free-field air explosion is an extremely complex problem.It is generally considered that the waveform consists of overpressure peak,positive pressure zone and negative pressure zone.Most of current practice usually considers only the positive pressure.Many empirical relations are available to predict overpressure peak,the positive pressure action time and pressure decay law.However,there are few models that can predict the whole waveform.The whole process of explosion shock wave overpressure,which was expressed as the product of the three factor functions of peak,attenuation and oscillation,was proposed in the present work.According to the principle of explosion similarity,the scaled parameters were introduced and the empirical formula was absorbed to form a mathematical model of shock wave overpressure.Parametric numerical simulations of free-field air explosions were conducted.By experimental verification of the AUTODYN numerical method and comparing the analytical and simulated curves,the model is proved to be accurate to calculate the shock wave overpressure under free-field air explosion.In addition,through the model the shock wave overpressure at different time and distance can be displayed in three dimensions.The model makes the time needed for theoretical calculation much less than that for numerical simulation.

A novel artificial intelligent model for predicting air overpressure using brain inspired emotional neural network

Blasting is the live wire of mining and its operations,with air overpressure(AOp)recognised as an end product of blasting.AOp is known to be one of the most important environmental hazards of mining.Further research in this area of mining is required to help improve on safety of the working environment.Review of previous studies has shown that many empirical and artificial intelligence(AI)methods have been proposed as a forecasting model.As an alternative to the previous methods,this study proposes a new class of advanced artificial neural network known as brain inspired emotional neural network(BIENN)to predict AOp.The proposed BI-ENN approach is compared with two classical AOp predictors(generalised predictor and McKenzie formula)and three established AI methods of backpropagation neural network(BPNN),group method of data handling(GMDH),and support vector machine(SVM).From the analysis of the results,BI-ENN is the best by achieving the least RMSE,MAPE,NRMSE and highest R,VAF and PI values of 1.0941,0.8339%,0.1243%,0.8249,68.0512%and 1.2367 respectively and thus can be used for monitoring and controlling AOp.

Effects of Obstacles on Flame Propagation Behavior and Explosion Overpressure Development During Gas Explosions in a Large Closed Tube

AutoReaGas was used for the simulations of premixed gas/air mixtures explosion characteristics in obstacle-filled tubes with a cross-section of 0.2 m×0.2 m and the length of 28 m. Numerical analyses provide a quantitative description of dependence of flame propagation speed and explosion overpressure on obstacles number, blockage ratio and interval distance. Computational results indicate that the obstacles play a significant role in determining the flame transmission speed and explosion overpressure in gas explosions. With the increase of blockage ratio, the explosion overpressure gradually rises. Nevertheless, the flame speed does not always increase along with increasing blockage ratio, but subsequently begins to decrease as the blockage ratio increases to some extend. Also, the interval distance between obstacles strongly influences flame behavior and explosion overpressure. When the obstacle interval distance is equal to inner diameter of the tube, the average flame speed in the obstacle zone and the peak overpressure in tube all reach maximum values.

Characteristics and Genetic Mechanisms of Overpressure in the Depressions of Bohai Bay Basin, China

The distribution and genetic mechanisms of abnormal pressures in the Bohai Bay Basin were systematically analyzed. Abnormal pressures are widely developed in the Bohai Bay Basin, primarily in the Paleogene E2s4, E2s3, Es1, and Ed formations. From the onshore area of the Bohai Bay Basin to the center of the Bozhong area, the top depth of the overpressured zone in each depression increases gradually, the overpressured strata in each depression gradually move to younger formations, and the pressure structure successively alters from single-bottom- overpressure to double-bottom-overpressure and finally to double-top-overpressure. The distribution of overpressured area is consistent with the sedimentary migration controlled by the tectonic evolution of the Bohai Bay Basin, which is closely related to the hydrocarbon-generation capability of active source rocks. The overpressured strata are consistent with the source-rock intervals in each depression; the top of the overpressured zone is synchronous with the hydrocarbon generation threshold in each depression; the hydrocarbon generation capability is positively correlated with the overpressure magnitude in each formation. Undercompaction was the main mechanism of overpressure for depressions with fluid pressure coefficients less than 1.2, whereas hydrocarbon generation was the main mechanism for depressions with fluid pressure coefficients greater than 1.5.

Effects of Overpressured Fluid Flow on Petroleum Accumulation in the Yinggehai Basin

The Yinggehai Basin is a strongly overpressured Cenozoic basin developed in the northern continental shelf of the South China Sea. The flow of overpressured fluids in this basin has given rise to strong effects on petroleum accumulation. (1) The overpressured fluid flow has enhanced the maturation of shallow-buried source rocks, which has caused the source rocks that would have remained immature under the conduction background to be mature for hydrocarbon generation. As a result, the overpressured fluid flow has increased the volume and interval of mature source rocks. (2) The overpressured fluid flow has strong extraction effects on the immature or low-mature source rocks in the shallow parts. This has increased, to some extent, the expulsion efficiency of the source rocks. More importantly, the extraction effects have strongly limited the effectiveness of biomarker parameters from oil and condensate in reflecting the source and maturity of the oil and gas. (3) The flow has caused the sandstones in the shallow parts to get into the late diagenesis stage, and significantly reduced the porosity and permeability of the sandstones. This study confirms that even in sedimentary basins in which no topography-driven groundwater flow systems have ever developed, the cross-formation migration of overpressured fluids and the resultant energy conduction and material exchange can significantly affect the thermal regime, source rock maturation and sandstone diagenesis. As a result, the effects of overpressured fluid flow must be taken into account in analyzing the mechanism of petroleum accumulation.

Behind-plate overpressure effect of steel-encased reactive material projectile impacting thin aluminum plate

Ballistic impact and sealed chamber tests were performed on the steel-encased reactive material projectile(SERMP)to understand its behind-plate overpressure effect when impacting the thin aluminum plates.The reactive material encased with a 1.5 mm thick 30CrMnSiNi2A steel shell was launched onto the initially sealed test chamber with a 3 mm thick 2024-T3 thin aluminum cover plate.Moreover,the overpressure signals in the test chamber were recorded by pressure sensors.The experimental results indicate an unusual behind-plate overpressure effect:as the density of the projectile increases from 6.43 g/cm^(3) to 7.58 g/cm^(3) by increasing the content of tungsten powder,although its total chemical energy decreases,it produces a higher behind-target overpressure at a lower impact velocity.A theoretical model is proposed to predict the reaction length of reactive material inside the projectile based on one-dimensional shock wave theory to understand this unexpected result.In addition,the deviation between the actual energy release and the theoretical calculation results,also the variation of overpressure rise time are analyzed and discussed.As the analyses show,when the SERMP successfully penetrates the cover plate,an increasing density of the reactive material inside the projectile always means that the delaying rarefaction wave effect,an increase of its internal pressure and strain rate levels.These factors lead to the increase of the overpressure limit velocity and reaction extent of the reactive material,while the overpressure rise time decreases.

Numerical investigation of the shockwave overpressure fields of multi-sources FAE explosions

Shockwaves from fuel-air explosive(FAE)cloud explosions may cause significant casualties.The ground overpressure field is usually used to evaluate the damage range of explosion shockwaves.In this paper,a finite element model of multi-sources FAE explosion is established to simulate the process of multiple shockwaves propagation and interaction.The model is verified with the experimental data of a fourfoldsource FAE explosion,with the total fuel mass of 340 kg.Simulation results show that the overpressure fields of multi-sources FAE explosions are different from that of the single-source.In the case of multisources,the overpressure fields are influenced significantly by source scattering distance and source number.Subsequently,damage ranges of overpressure under three different levels are calculated.Within a suitable source scattering distance,the damage range of multi-sources situation is greater than that of the single-source,under the same amount of total fuel mass.This research provides a basis for personnel shockwave protection from multi-sources FAE explosion.

Characteristics,origin and controlling effects on hydrocarbon accumulation of overpressure in foreland thrust belt of southern margin of Junggar Basin,NW China

Aiming at the differential distribution of overpressure in vertical and lateral directions in the foreland thrust belt in the southern margin of Junggar Basin,the study on overpressure origin identification and overpressure evolution simulation is carried out.Based on the measured formation pressure,drilling fluid density and well logging data,overpressure origin identification and overpressure evolution simulation techniques are used to analyze the vertical and lateral distribution patterns of overpressure,genetic mechanisms of overpressure in different structural belts and causes of the differential distribution of overpressure,and the controlling effects of overpressure development and evolution on the formation and distribution of oil and gas reservoirs.The research shows that overpressure occurs in multiple formations vertically in the southern Junggar foreland thrust belt,the deeper the formation,the bigger the scale of the overpressure is.Laterally,overpressure is least developed in the mountain front belt,most developed in the fold anticline belt,and relatively developed in the slope belt.The differential distribution of overpressure is mainly controlled by the differences in disequilibrium compaction and tectonic compression strengths of different belts.The vertical overpressure transmission caused by faults connecting the deep overpressured system has an important contribution to the further increase of the overpressure strength in this area.The controlling effect of overpressure development and evolution on hydrocarbon accumulation and distribution shows in the following aspects:When the strong overpressure was formed before reservoir becoming tight overpressure maintains the physical properties of deep reservoirs to some extent,expanding the exploration depth of deep reservoirs;reservoirs below the overpressured mudstone cap rocks of the Paleogene Anjihaihe Formation and Lower Cretaceous Tugulu Group are main sites for oil and gas accumulation;under the background of overall overpressure,both overpressure strength too high or too low are not conducive to hydrocarbon enrichment and preservation,and the pressure coefficient between 1.6 and 2.1 is the best.

Arterial faults and their role in mineralizing systems

In quartzo-feldspathic continental crust with moderate-to-high heat flow,seismic activity extends to depths of 10-20 km,bounded by isotherms in the 350-450 C range.Fluid overpressuring above hydrostatic in seismogenic crust,is heterogeneous but tends to develop in the lower seismogenic zone(basal seismogenic zone reservoir=b.s.z.reservoir) where the transition between hydrostatically pressured and overpressured crust is likely an irregular,time-dependent.3-D interface with overpressuring concentrated around active faults and their ductile shear zone roots.The term Arterial Fault is applied to fault structures that root in portions of the crust where pore fluids are overpressured(i.e.at> hydrostatic pressure) and serve as feeders for such fluids and their contained solutes into overlying parts of the crust.While arterial flow may occur on any type of fault,it is most likely to be associated with reverse faults in areas of horizontal compression where fluid overpressuring is most easily sustained.Frictional stability and flow permeability of faults are both affected by the state of stress on the fault(shear stress,τ;normal stress,σn),the level of pore-fluid pressure,Pf,and episodes of fault slip,allowing for a complex interplay between fault movement and fluid flow.For seismically active faults the time dependence of permeability is critical,leading to fault-valve behaviour whereby overpressures accumulate at depth during interseismic intervals with fluid discharged along enhanced fault-fracture permeability following each rupture event.Patterns of mineralization also suggest that flow along faults is non-uniform,concentrating along tortuous pathways within the fault surface.Equivalent hydrostatic head above ground level for near-lithostatic overpressures at depth(<1.65×depth of zone) provides a measure of arterial potential.Settings for arterial faults include fault systems developed in compacting sedimentary basins,faults penetrating zones of active plutonic intrusion that encounter overpressured fluids exsolved from magma,together with those derived from contact metamorphism of fluid-rich wallrocks,and/or from regional devolatilisation accompanying prograde metamorphism.Specially significant are active faults within accretionary prisms rooted into overpressured subduction interfaces,and steep reverse faults activated by high overpressures from b.s.z.reservoirs during compressional inversion.

Investigation on the relationship between overpressure and sub-harmonic response from encapsulated microbubbles

Sub-harmonic component generated from microbubbles is proven to be potentially used in noninvasive blood pressure measurement. Both theoretical and experimental studies are performed in the present work to investigate the dependence of the sub-harmonic generation on the overpressure with different excitation pressure amplitudes and pulse lengths. With 4-MHz ultrasound excitation at an applied acoustic pressure amplitude of 0.24 MPa, the measured sub-harmonic amplitude exhibits a decreasing change as overpressure increases; while non-monotonic change is observed for the applied acoustic pressures of 0.36 MPa and 0.48 MPa, and the peak position in the curve of the sub-harmonic response versus the overpres- sure shifts toward higher overpressure as the excitation pressure amplitude increases. Furthermore, the exciting pulse with long duration could lead to a better sensitivity of the sub-harmonic response to overpressure. The measured results are ex- plained by the numerical simulations based on the Marmottant model. The numerical simulations qualitatively accord with the measured results. This work might provide a preliminary proof for the optimization of the noninvasive blood pressure measurement through using sub-harmonic generation from microbubbles.

Effect of Overpressure on Rock Frame and Its Implications for Overpressure Evolution

Overpressure is a hot topic in the study of sedimentary basins. It is important in generation, maturation migration, and accumulation of hydrocarbon, but the effects of overpressure on rock frame have not been investigated. In this study, experiments were carried out to study the effects of overpressure on rock frame structures using five core samples from the Junggar basin, Northwest China. The deformations and velocities for the samples were measured at different effective pressures related to non-equilibrium compaction and fluid expansion overpressure mechanisms. The results show that the effect of overpressure on rock frames gradually increases when the effective pressure drops down to a certain value （called critical pressure）. Moreover, non-equilibrium compaction mechanism has more effects on rock frames than fluid expansion mechanism under the same effective pressure. Furthermore to study rock frame structural changes, we use Kuster and Toksoz＇s expressions to simulate the effective aspect ratios of inclusions a （penny shapes） for different effective pressures. The results show that the a decreases dramatically when the effective pressure decreases from the critical pressure. Changes of a can be interpreted as responses to the rock frame changes when grains conform one another by rotating and self-adjusting. However, different mechanisms of overpressure have different effects on rock frames. The rock frame can be affected more easily by overpressure in shallow regions generated by non-equilibrium compaction mechanism. Once this kind of rock frames are preserved after overpressure releases to a normal hydrostatic pressure, they can be identified by their specific rock frame characters. This method provides a new way to study overpressure release and fluid migration and accumulation.

High-Temperature Overpressure Basin Reservoir and Pressure Prediction Model

Yinggehai Basin locates in the northern South China Sea. Since the Cainozoic Era, crust has several strong tension: the basin subsides quickly, the deposition is thick, and the crust is thin. In the central basin, formation pressure coefficient is up to 2.1;Yinggehai Basin is a fomous high-temperature overpressure basin.YinggehaiBasin’s in-depth, especially high-temperature overpressure stratum has numerous large-scale exploration goals. As a result of high-temperature overpressure basin’s perplexing geological conditions and geophysical analysis technical limitations, this field of gas exploration can’t be carried out effectively, which affects the process of gas exploration seriously. A pressure prediction model of the high-temperature overpressure basin in different structural positions is summed up by pressure forecast pattern research in recent years, which can be applied to target wells pre-drilling pressure prediction and post drilling pressure analysis of Yinggehai Basin. The model has small erroneous and high rate of accuracy. The Yinggehai Basin A well drilling is successful in 2010, and gas is discovered in high-temperature overpressure stratum, which proved that reservoir can be found in high-temperature overpressure stratum. It is a great theoretical breakthrough of reservoir knowledge.

Overpressure origin and its effects on petroleum accumulation in the conglomerate oil province in Mahu Sag, Junggar Basin, NW China

The origin of overpressure and its effect on petroleum accumulation in the large Permian/Triassic conglomerate oil province in the Mahu Sag,Junggar Basin have been investigated based on comprehensive analysis of log curve combinations,loading-unloading curves,sonic velocity-density cross-plot,and porosity comparison data.The study results show that there are two kinds of normal compaction models in the study area,namely,two-stage linear model and exponent model;overpressure in the large conglomerate reservoirs including Lower Triassic Baikouquan Formation and Permian Upper and Lower Wu’erhe Formations is the result of pressure transfer,and the source of overpressure is the overpressure caused by hydrocarbon generation of Permian Fengcheng Formation major source rock.The petroleum migrated through faults under the driving of hydrocarbon generation overpressure into the reservoirs to accumulate,forming the Permian and Triassic overpressure oil and gas reservoirs.The occurrence and distribution of overpressure are controlled by the source rock maturity and strike-slip faults connecting the source rock and conglomerate reservoirs formed from Indosinian Movement to Himalayan Movement.As overpressure is the driving force for petroleum migration in the large Mahu oil province,the formation and distribution of petroleum reservoirs above the source rock in this area may have a close relationship with the occurrence of overpressure.

Formation of inter-salt overpressure fractures and their significances to shale oil and gas: A case study of the third member of Paleogene Shahejie Formation in Dongpu sag, Bohai Bay Basin

Taking the inter-salt organic-rich shales in the third member of Paleogene Shahejie Formation(Es3)of Dongpu sag in Bohai Bay Basin as an example,the origin of overpressure,development characteristics,formation and evolution mechanism,formation stages and geological significance on shale oil and gas of overpressure fractures in the inter-salt shale reservoir were investigated by means of thin section identification,scanning electron microscopy observation,analysis of fluid inclusions,logging data analysis,and formation pressure inversion.The results show that overpressure is universal in the salt-lake basin of Dongpu sag,and under-compaction caused by the sealing of salt-gypsum layer,pressurization due to hydrocarbon generation,transformation and dehydration of clay minerals,and fault sealing are the 4 main factors leading to the occurrence of overpressure.The overpressure fractures are small in scale,with an average length of 356.2μm and an average underground opening of 11.6μm.But they are densely developed,with an average surface density of 0.76 cm/cm2.Moreover,they are often accompanied by oil and gas charging,and thus high in effectiveness.Overpressure fractures were mainly formed during two periods of large-scale oil and gas charging,approximately 25-30 Ma ago and 0-5 Ma ago.Inter-salt overpressure fractures play dual roles as the storage space and migration paths of shale oil and gas.They contribute 22.3%to the porosity of shale reservoir and 51.4%to the permeability.They can connect fracture systems of multiple scales,greatly improving the quality of shale reservoir.During the development of shale oil and gas,inter-salt overpressure fractures can affect the extension and morphology of hydraulic fractures,giving rise to complex and highly permeable volumetric fracture networks,improving hydraulic fracturing effect and enhancing shale oil and gas productivity.