Intensification of bituminous coal and lignite oxidation by copper-based activating additives

The oxidation of lignite and bituminous coal samples modified by 5 wt%(in terms of dry salt)addition of copper salts Cu(NO_(3))_(2),CuSO_(4),and Cu(CH_(3)COO)_(2) was studied.The samples’reactivity was studied by thermogravimetry within a temperature range of 45–600℃ at a heating rate of 2.5℃/min in an oxidizing environment.The introduction of activating additives has resulted in a significant decrease in the temperature of intense oxidation onset(ΔT_(i)=20/94℃),in a reduction in the sample residence time in the volatile matter release region(Δt_(e)=2/22 min)and the total duration of the coal combustible mass oxidation(Δt_(f)=8/14 min).The Friedman method was used to calculate the activation energy values for the oxidation process of the modified samples.The maximum change in activation energy values was observed for the bituminous coal sample.The possible mechanism behind the action of the copper-salt additives,which activate the oxidation of lignite and bituminous coal,is discussed.According to the data of mass spectrometric analysis,the concentration of NOx in the reaction products decreases as the temperature of the activated oxidation process is shifted towards the low-temperature region.

Electron Donating Property and Catalytic Activity ofPerovskite-type Mixed Oxides (ABO_3) Consisting of Rare Earth and 3d Transition Metals

The catalytic activity of Perovskite-type mixed oxides (LaCoO3, PrCoO3 and SmCoO3) for the reduction of cyclohexanone to cyclohexanol with 2-propanol (Meerwein-PonndorfVerley reduction) has been studied. The data have been correlated with the surface electron donor properties of these mixed oxides

Invariance and Noises of Shannon Entropy for Information on Oxidative Activity of DNA in All Living Cells for Medical Diagnostics

We analyze oxidative activity of DNA due to fluorescence of chromosomes inside cells, using flow cytometry method with nanometer spatial resolution. Statistics of fluorescence is presented in histogram as frequency distributions of flashes in the dependence on their intensity and in distributions of Shannon entropy, which was defined on the base of normalized distribution of information in original histogram for frequency of flashes. We show that overall sum of entropy, i.e. total entropy E , for any histogram is invariant and has identical trends of changes all values of E(r) = lnr at reduction of histogram’ rank r. This invariance reflects informational homeostasis of chromosomes activity in multi-scale networks of entropy inside all cells in various samples of blood for DNA inside neutrophils, lymphocytes, inside all leukocytes of human and inside chicken erythrocytes for various dyes, colors and various excitations of fluorescence. Informational homeostasis of oxidative activity of 3D DNA in the full set of chromosomes inside living cells exists for any Shannon-Weaver index of biodiversity of cells, at any state of health different beings. Regulation perturbations in information activity DNA provides informational adaptability and vitality of cells at homeostasis support. Noises of entropy, during regulation of informational homeostasis, depend on the states of health in real time. The main structural reconstructions of chromosomal correlations, corresponding to self-regulation of homeostasis, occur in the most large-scale networks of entropy, for rank r<32. We show that stability of homeostasis is supported by activity of all 46 chromosomes inside cells. Patterns, hidden switching and branching in sequences of averages of H?lder and central moments for noises in regulation of homeostasis define new opportunities in diagnostics of health and immunity. All people and all aerobic beings have one overall homeostatic level for countdown of information activity of DNA inside cells. We noted very bad and dangerous properties of artificial cells with other levels of informational homeostasis for all aerobic beings in foods, medical treatment and in biotechnologies.

Selective and effective oxidation of 5-hydroxymethylfurfural by tuning the intermediates adsorption on Co-Cu-CN_(x)

Co-based catalysts are promising alternatives to precious metals for the selective and effective oxidation of 5-hydroxymethylfurfural(HMF)to the higher value-added 2,5-furandicarboxylic acid(FDCA).However,these catalysts still suffer from unsatisfactory activity and poor selectivity.A series of N-doped carbon-supported Co-based dual-metal nanoparticles(NPs)have been designed,among which the Co-Cu_(1.4)-CN_(x) exhibits enhanced HMF oxidative activity,achieving FDCA formation rates 4 times higher than that of pristine Co-CN_(x),with 100%FDCA selectivity.Density functional theory(DFT)calculations evidenced that the increased electron density on Co sites induced by Cu can mediate the positive electronegativity offset to downshift the dband center of Co-Cu_(1.4)-CN_(x),thus reducing the energy barriers for the conversion of HMF to FDCA.Such findings will support the development of superior non-precious metal catalysts for HMF oxidation.

MIL-101(Cr)-decorated Ti/TiO_(2) anode for electrochemical oxidation of aromatic pollutants from water

Hydroxyl radicals(·OH) generated on anode play a vital role in electrochemical oxidation(EO) of organic pollutants for water treatment. Inspired by the four-electron oxygen evolution reaction(OER), we supposed an anode-selection strategy to stabilize deeply oxidized states(*O and*OOH) which are beneficial to generating·OH. To verify the hypothesis, a candidate anode component(MIL-101(Cr), a well-known metal-organic framework with active variable-valence transition metal centers) was used to coat Ti/TiO_(2)plate to fabricate anodes. Compared to TiO_(2)(101) plane on undecorated anode surface, fast and complete removal of aniline and phenol, and improved energy utilization were achieved on MIL-101(Cr)-coatedTi/TiO_(2)anode. Mechanism investigation, including pollutant degradation pathways, showed the predominate contribution(69.60%–75.13%) of·OH in pollutant mineralization. Density functional theory(DFT)computations indicated Cr site in MIL-101(Cr) was more conducive to stabilizing*O and*OOH, leading to thermodynamical spontaneous generation of·OH. This work opens up an exciting avenue to explore·OH production, and supplies a useful guidance to the development of anode materials for EO process.

Enhanced cycle performance of Li/S battery with the reduced graphene oxide/activated carbon functional interlayer

The high-energy lithium/sulfur(Li/S) battery has become a very popular topic of research in recent years due to its high theoretical capacity of 1672 m Ah/g. However, the polysulfide shuttle effect remains of great concern with a great number of publications dedicated to its mitigation. In this contribution, a three-dimensional(3D) reduced graphene oxide/activated carbon(RGO/AC) film, synthesized by a simple hydrothermal method and convenient mechanical pressing, is sandwiched between the separator and the sulfur-based cathode, acting as a functional interlayer to capture and trap polysulfide species. Consequently, the Li/S cell with this interlayer shows an impressive initial discharge capacity of 1078 m Ah/g and a reversible capacity of 655 m Ah/g even after 100 cycles. The RGO/AC interlayer impedes the movement of polysulfide while providing unimpeded channels for lithium ion mass transfer. Therefore, the RGO/AC interlayer with a well-designed structure represents strong potential for high-performance Li/S batteries.

Immobilized reactor for rapid destruction of recalcitrant organics and inorganics in tannery wastewater

The wastewater discharged from tanneries lack biodegradability due to the presence of recalcitrant compounds at significant concentration. The focal theme of the present investigation was to use chemo-autotrophic activated carbon oxidation(CAACO) reactor, an immobilized cell reactor using chemoautotrophs for the treatment of tannery wastewater. The treatment scheme comprised of anaerobic treatment, sand filtration, and CAACO reactor, which remove COD, BOD, TOC, VFA and sulphides respectively by 86%, 95%, 81%, 71% and 100%. Rice bran mesoporous activated carbon prepared indigenously and was used for immobilization of chemoautotrophs. The degradation of xenobiotic compounds by CAACO was confirmed through HPLC and FT-IR techniques.

Effects of selenium and sulfur on antioxidants and physiological parameters of garlic plants during senescence

A hydroponic study was conducted to determine the effects of selenium（Se： 0, 3, 6 μmol L^-1） on senescence-related oxidative stress in garlic plants grown under two sulfur（S） levels. We evaluated the yields of plants harvested at 160 and 200 days after sowing. Plants grown under a low Se dose（0.3 μmol L^-1） at low S level showed higher yields（12.0% increase in fresh weight yield, 13.7% increase in dry weight yield） than the controls, despite a decrease in chlorophyll concentration. Compared with control plants, the Se-treated plants showed lower levels of lipid peroxidation. The Se-treated plants also showed higher activities of glut athione peroxidase and catalase, but lower superoxide dismutase activities. Changes in Fv/Fm values and proline contents were affected more strongly by S than by Se. On the basis of our results, we can conclude that Se plays a key role in the antioxidant systems in garlic seedlings. It delays senescence by alleviating the peroxide stress, but it can be toxic at high levels. A high S level may increase tolerance to high Se concentrations through reducing Se accumulation in plants.

Reduction of chromium oxides in stainless steel dust

The recovery of metal oxides from stainless steel dust using C（graphite）, SiFe, and Al as reductants was investigated under various conditions. The apparent distribution ratio of Cr（L Cr ′^m/s ） in the recovered metal and residual slag phases was defined as the major performance metric. The results show that the recovery ratio of metals increases as the ratio of CaO ：SiO2 by mass in the residual slag increases to 1.17. The residual content of metals in the slag decreases as the Al2O3 content of the slag is increased from approximately 8wt% to 10wt%. The recovery ratio of Cr increases with increasing L Cr ′^ m/s , and a linear relationship between L Cr ′^m/s and the activity coefficient ratio of CrO in the slag and the recovered metal phase is observed. The combination of C and SiFe or Al as the reducing agents reveals that Si is the more effective coreductant.

Effect of CeO_2 on Crystal Structures and Catalytic Properties of the Mn_2O_3 Catalysts

The manganese-cerium complex oxide catalysts were prepared by coprecipitation.The crystal structures,the desorption properties of surface oxygen and reducibility of these catalysts were investigated by means of X-ray diffraction analysis (XRD),temperature-programmed desopotion-mass spectrography (TPD-MS) and temperature-programmed reduction (TPR).The crystal structure of Mn-O and Mn-Ce-O catalysts are bixbyite-Mn2O3 and γ-Mn2O3 respectively.The presence of CeO2 can not change the position of the feature peaks of Mn2O3 on the TPD or profiles,but can increase evidently the amount of the adsorbed surface oxygen,which are correlated with the catalytic activity for methanol oxidation.The activity of the catalyst is optimum when Mn/Ce atom ratio is 4:1.The presence of CeO2 brings a change of the reducibility,which reveals that there is an interaction between Mn2O3 and CeO2.

Effect of Addition of Sm_2O_3 on Property of CuO-γ-Al_2O_3 Catalyst

Effect of the addition of Sm 2O 3 on CuO γ Al 2O 3 catalyst for CO oxidation reaction was investigated. The result shows that the right amount of Sm 2O 3 can promote the adsorption of the surface oxygen and recovery of CuO γ Al 2O 3 catalyst. Sm 2O 3 plays an important role in change of γ Al 2O 3 phase into θ Al 2O 3 phase. In addition, the right amount of Sm 2O 3(5%) can improve the oxidation activity of the CuO γ Al 2O 3 catalyst. Whereas an excess of Sm 2O 3(10%) makes the CuO crystal in CuO γ Al 2O 3 catalyst become bigger and restrain the oxidation activity of the CuO γ Al 2O 3 catalyst.

Regeneration of Spent Catalyst and Impregnation of Catalyst by Supercritical Fluid

The possibility and feasibility of using supercritical fluid СО2 extraction process have been investigated and described in the book as part of the task of spent catalysts regeneration. The analysis of deactivating compounds has been carried out for industrial catalysts such as: 1) palladium catalyst G-58E of ethane-ethylene fraction hydrogenation;2) nickel/kieselguhr catalyst of process of separating acetylenic compounds from isoprene;3) active aluminum oxide catalyst of methyl phenyl carbinol dehydration process;4) palladium catalyst LD-265 of hydrocarbons hydrogenation process;5) nickel-molybdenum catalysts DN-3531 and Criterion 514 of kerosene hydrotreating process. The results of the study of catalyst deactivating compounds solubility in pure supercritical carbon dioxide and supercritical carbon dioxide are modified with polar additive. The results of the solubility study are described using the Peng-Robinson equation of state. The results of the implementation of the supercritical fluid СО2 extraction process with respect to deactivated industrial catalyst samples have been provided. A comparison of the characteristics of samples of catalysts regenerated using the traditional approach and the SC-CO2 extraction process has been conducted. The possibility of using supercritical fluid CO2 impregnation process in the synthesis of a palladium catalyst has been investigated. The synthesis of palladium chloride-based organometallic complexes has been carried out. The results of the study of solubility thereof in supercritical carbon dioxide have been provided. A dynamic supercritical fluid CO2 impregnation process condition has been implemented. A comparison of the characteristics of palladium catalyst samples synthesized using the conventional approach and SC-CO2 impregnation process has been conducted and presented in the book.

Experimental Design Technique on Removal of Hydrogen Sulfide using CaO-eggshells Dispersed onto Palm Kernel Shell Activated Carbon：Experiment,Optimization,Equilibrium and Kinetic Studies

This study presents the use of chicken eggshells waste utilizing palm kernel shell based activated carbon（PKSAC） through the modification of their surface to enhance the adsorption capacity of H2S. Response surface methodology technique was used to optimize the process conditions and they were found to be： 500 mg/L for H2S initial concentration, 540 min for contact time and 1 g for adsorbent mass. The impacts of three arrangement factors（calcination temperature of impregnated activated carbon（IAC）, the calcium solution concentration and contact time of calcination） on the H2S removal efficiency and impregnated AC yield were investigated. Both responses IAC yield（IACY, %） and removal efficiency（RE, %） were maximized to optimize the IAC preparation conditions. The optimum preparation conditions for IACY and RE were found as follows： calcination temperature of IAC of 880 ℃, calcium solution concentration of 49.3% and calcination contact time of 57.6 min, which resulted in 35.8% of IACY and 98.2% RE. In addition, the equilibrium and kinetics of the process were investigated. The adsorbent was characterized using TGA, XRD, FTIR, SEM/EDX, and BET. The maximum monolayer adsorption capacity was found to be 543.47 mg/g. The results recommended that the composite of PKSAC and Ca O could be a useful material for H2S containing wastewater treatment.

Further study on the synthesis of F-containing porphyrins and their catalytic activity on oxidation of cyclohexene

Reaction of tetrakis(p-allyloxyphenyl)porphyrin and perfluoroalkanesulfonyl bromides gives tetrakis(p-polyfluoroalkoxylphenyl)substituted porphyrins.The yields are over 90%.The synthesis of the metal ion complexes of these F-containing porphyrins is also reported.Preliminary results on the study of the catalytic activity of the manganese(Ⅲ)complexes of various fluorinated porphyrins on oxidation of cyclohexene indicate that the introduction of R_F group into porphyrin contributes to the stability of the catalysts.

Involvements of chloride ion in decolorization of Acid Orange 7 by activated peroxydisulfate or peroxymonosulfate oxidation

The effects of chloride anion （Cl-） （up to 1.0 mol/L） on the decolorization of a model compound,azo dye Acid Orange 7 （AO7）,by sulfate radical （SO4-） based-peroxydisulfate （PS） or peroxymonosulfate （PMS） oxidation under various activated conditions （UV 254 nm /PS,Thermal （70°C/PS,UV 254 nm /PMS,Co 2＋ /PMS） were investigated.Methanol and NH4 ＋ were used as quenching reagents to determine the contributions of active chlorine species （dichloride radical （Cl2-.） and hypochlorous acid （HClO））.The results indicated that the effects of Cl- on the reaction mechanism were different under various activated conditions.For UV/PS and Thermal/PS,the inhibition tendency became more clear as the Cl- concentration increased,probably due to the reaction between Cl- and SO4-.and the generation of Cl2-.or HClO.For UV/PMS,Cl- did not exhibit inhibition when the concentration was below 0.1 mol/L.As Cl- concentration reached to 1.0 mol/L,the decolorization rate of AO7 was,however,accelerated,possibly because PMS directly reacts with Cl- to form HClO.For Co2＋ /PMS,Cl- exhibited a significant inhibiting effect even at low concentration （ 0.01 mol/L）.When Cl- concentration exceeded 0.1 mol/L,the activation of PMS by Co 2＋ was almost completely inhibited.Under this condition,HClO maybe played a major role in decolorization of AO7.The results implicated that chloride ion is an important factor in SO4-.-based degradation of organic contamination in chloride-containing water.

Microstructural Evolution and Oxidation Resistance of Multi-walled Carbon Nanotubes in the Presence of Silicon Powder at High Temperatures

The microstructural evolution and oxidation resistance of multi-walled carbon nanotubes （MWCNTs） by di- rectly heating silicon powder and MWCNTs in a coke bed from 1000 to 1500 ~C are investigated with the aid of X-ray diffraction （XRD）, scanning electron microscopy （SEM）, high resolution transmission electron microscopy （HRTEM） and thermogravimetry-differential scanning calorimetry （TG-DSC）. The results showed that the morphology and microstructure of MWCNTs did not change much after being treated from 1000 ~C to 1200 ~C. An obvious SiC coating was formed on the surface of MWCNTs from 1300 to 1400 ~C. Up to 1500 ~C, nearly all the MWCNTs transformed into SiC nanowires. The oxidation resistance of the treated MWCNTs was improved compared with as-received ones. Non-isothermal kinetics showed that the oxidation activation energy of the treated MWCNTs reached 208 kJ/mol, much higher than 264 k J/tool of as-received ones.

Morphology of Oxide Scale and Oxidation Kinetics of Low Carbon Steel

The oxidation kinetics and composition of oxide scales on low carbon steel （SPHC） were studied during i- sothermal oxidation. Thermogravimetric analyzer （TGA） was used to simulate isothermal oxidation process of SPHC for 240 min under air condition, and the temperature range was from 500 to 900 ℃. Scanning electron microscope （SEM） was used to observe cross-sectional scale morphology and analyze composition distribution of oxide scales. The morphology of oxide scale was classical three-layer structure. Fe2 03 developed as whiskers at the outermost lay- er, and interlayer was perforated-plate Fe3 04 while innermost layer was pyramidal FeO. From the oxidation curves, the oxidation mass gain per unit area with time was of parabolic relation and oxidation rate slowed down. On the ba- sis of experimental data, the isothermal oxidation kinetics model was derived and oxidation activation energy of SPHC steel was 127. 416 kJ/mol calculated from kinetics data.

Characterization of char from high temperature fluidized bed coal pyrolysis in complex atmospheres

The physiochemical properties of chars produced by coal pyrolysis in a laboratory-scale fluidized bed reactor with a continuous coal feed and char discharge at temperatures of 750 to 980 ~ C under N2-based atmospheres containing 02, H2, CO, CH4, and CO2 were studied. The specific surface area of the char was found to decrease with increasing pyrolysis temperature. The interlayer spacing of the char also decreased, while the average stacking height and carbon crystal size increased at higher temperatures, suggesting that the char generated at high temperatures had a highly ordered structure. The char obtained using an ER value of 0.064 exhibited the highest specific surface area and oxidation reactivity. Rela- tively high 02 concentrations degraded the pore structure of the char, decreasing the surface area. The char produced in an atmosphere incorporating H2 showed a more condensed crystalline structure and consequently had lower oxidation reactivity.

Preparation of ZrB_(2)-MoSi_(2) high oxygen resistant coating using nonequilibrium state powders by self-propagating high-temperature synthesis

To achieve high oxygen blocking structure of the ZrB_(2)-MoSi_(2) coating applied on carbon structural material,ZrB_(2)-MoSi_(2) coating was prepared by spark plasma sintering(SPS)method utilizing ZrB_(2)-MoSi_(2) composite powders synthesized by self-propagating high-temperature synthesis(SHS)technique as raw materials.The oxygen blocking mechanism of the ZrB_(2)-MoSi_(2) coatings at 1973 K was investigated.Compared with commercial powders,the coatings prepared by SHS powders exhibited superior density and inferior oxidation activity,which significantly heightened the structural oxygen blocking ability of the coatings in the active oxidation stage,thus characterizing higher oxidation protection efficiency.The rise of MoSi_(2) content facilitated the dispersion of transition metal oxide nanocrystals(5-20 nm)in the SiO_(2) glass layer and conduced to the increasing viscosity,thus strengthening the inerting impact of the compound glass layer in the inert oxidation stage.Nevertheless,the ZrB_(2)-40 vol% MoSi_(2) coating sample prepared by SHS powders presented the lowest oxygen permeability of 0.3% and carbon loss rate of 0.29×10^(6)g·cm^(-2)·s^(-1).Owing to the gradient oxygen partial pressure inside the coatings,the Si-depleted layer was developed under the compound glass layer,which brought about acute oxygen erosion.

Facile synthesis and excellent catalytic activity of gold nanoparticles on graphene oxide

For the first time,Au nanoparticles on graphene oxide（GO-AuNPs） were successfully fabricated without applying any additional reductants,just by the redox reaction between AuCl_4^（-1） and GO.Their structure was characterized by transmission electron microscopy and X-ray powder diffraction.The results show that flower-like AuNPs were successfully dispersed on GO surface.Importantly,they showed a high catalytic activity for the Suzuki-Miyaura coupling reaction in an aqueous medium.