In Vitro Targeted Magnetic Delivery and Tracking of Superparamagnetic Iron Oxide Particles Labeled Stem Cells for Articular Cartilage Defect Repair

To assess a novel cell manipulation technique of tissue engineering with respect to its ability to augment superparamagnetic iron oxide particles （SPIO） labeled mesenchymal stem cells （MSCs） density at a localized cartilage defect site in an in vitro phantom by applying magnetic force. Meanwhile, non-invasive imaging techniques were use to track SPIO-labeled MSCs by magnetic resonance imaging （MRI）. Human bone marrow MSCs were cultured and labeled with SPIO. Fresh degenerated human osteochondral fragments were obtained during total knee arthroplasty and a cartilage defect was created at the center. Then, the osteochondral fragments were attached to the sidewalls of culture flasks filled with phosphate-buffered saline （PBS） to mimic the human joint cavity. The SPIO-labeled MSCs were injected into the culture flasks in the presence of a 0.57 Tesla （T） magnetic force. Before and 90 min after cell targeting, the specimens underwent T2-weighted turbo spin-echo （SET2WI） sequence of 3.0 T MRI. MRI results were compared with histological findings. Macroscopic observation showed that SPIO-labeled MSCs were steered to the target region of cartilage defect. MRI revealed significant changes in signal intensity （P0.01）. HE staining exibited that a great number of MSCs formed a three-dimensional （3D） cell ＂sheet＂ structure at the chondral defect site. It was concluded that 0.57 T magnetic force permits spatial delivery of magnetically labeled MSCs to the target region in vitro. High-field MRI can serve as an very sensitive non-invasive technique for the visualization of SPIO-labeled MSCs.

APPLICATION OF SUPERCRITICAL TECHNIOUE IN PREPARATION OF ULTRAFINE OXIDE PARTICLE

Ultrafine particle (UFP)alumina has been prepared by supereritical fluid drying process of inorganic salt with organic solvent system, which is reported for the first time. UFP-alumina prepared from this system is featured by its hish specific surface area, large pore volume, small perticle size and low bulk density.

Formation of Ultrafine Metal Particles and Metal Oxide Precursor on Anodized Al by Electrolysis Deposition

Nickel was deposited by ac electrolysis deposition in the pores of the porous oxide film of Al produced by anodizing in phosphoric acid. Ultrafine rod-shaped Ni particles were formed in the pores. At the same time a film of Ni oxide precursor was developed on the surface of the porous oxide film. The Ni particles and the Ni oxide precursor were examined by SEM, TEM and X-ray diffraction. The thickness of the barrier layer of the porous oxide film was thin and it attributed to the formation of the metal particles, while the formation of the oxide precursor was associated with the surface pits which were developed in the pretreatment of Al.

In situ characterization of particle formation in spray flame synthesis using wide-angle light scattering

Wide-angle light scattering(WALS)was used for in situ measurements of droplet and nanoparticle size distributions during the synthesis of titania and iron oxide particles from liquid precursor solutions in the standardized SpraySyn burner for spray flame synthesis.Titania was synthesized from titanium tetraisopropoxide(TTIP)and iron oxide from iron(II)nitrate nonahydrate(INN)using ethanol(EtOH)as solvent.Scattering images were taken at heights up to 120 mm above the burner surface and classified into droplet and particle scattering.Droplet size distributions were derived from a sequential analysis of scattering data containing the oscillating Mie pattern,the lognormal size distribution parameters for spherical and fractal particle fractions from a multivariate approach on averaged particle scattering data.The results show that the precursor addition leads to altered evaporation behavior and even droplet disruption probably induced by puffing or micro-explosions compared to pure EtOH.In the case of TTIP(a hygroscopic alkoxide),the synthesis of a large fraction of spheres was observed,while the nitrate INN leads to the formation of mostly fractal aggregates.

Impacts of continuously regenerating trap and particle oxidation catalyst on the NO_2 and particulate matter emissions emitted from diesel engine

Two continuously regenerating diesel particulate filter （CRDPF） with different configurations and one particles oxidation catalyst （POC） were employed to perform experiments in a controlled laboratory setting to evaluate their effects on NO2, smoke and particle number emissions. The results showed that the application of the after-treatments increased the emission ratios of NO2/NOx significantly. The results of smoke emissions and particle number （PN） emissions indicated that both CRDPFs had sufficient capacity to remove more than 90% of total particulate matter （PM） and more than 97% of solid particles. However, the POC was able to remove the organic components of total PM, and only partially to remove the carbonaceous particles with size less than 30 nm. The negligible effects of POC on larger particles were observed due to its honeycomb structure leads to an inadequate residence time to oxidize the solid particles or trap them. The particles removal efficiencies of CRDPFs had high degree of correlations with the emission ratio of NO2/NOx. The PN emission results from two CRDPFs indicated that more NO2 generating in diesel oxidation catalyst section could obtain the higher removal efficiency of solid particles. However this also increased the risk of NO2 exposure in atmosphere.

Roles of SO_2 oxidation in new particle formation events

The oxidation of SO2 is commonly regarded as a major driver for new particle formation（NPF） in the atmosphere. In this study, we explored the connection between measured mixing ratio of SO2 and observed long-term（duration 〉 3 hr） and short-term（duration〈 1.5 hr） NPF events at a semi-urban site in Toronto. Apparent NPF rates（J30） showed a moderate correlation with the concentration of sulfuric acid（[H2SO4]） calculated from the measured mixing ratio of SO2 in long-term NPF events and some short-term NPF events（Category I）（R^2= 0.66）. The exponent in the fitting line of J30~ [H2SO4]nin these events was1.6. It was also found that SO2 mixing ratios varied a lot during long-term NPF events,leading to a significant variation of new particle counts. In the SO2-unexplained short-term NPF events（Category II）, analysis showed that new particles were formed aloft and then mixed down to the ground level. Further calculation results showed that sulfuric acid oxidized from SO2 probably made a negligible contribution to the growth of 〉 10 nm new particles.

Non-Gaussian noise-enhanced stochastic rate oscillations in CO oxidation on nanometer-sized Pd particles

The effect of non-Gaussian colored noise(NGN),mainly its departure q from the Gaussian noise,on the optimal ISRO of CO oxidation on nanometer-sized Pd particles was studied.It was found that the ISRO in the absence of external noise can still be enhanced when the NGN is applied.Specifically,the ISRO varies with changing q and becomes more regular at an appropriate q value,and when q is optimal,the ISRO becomes the most regular.Because the departure q from the Gaussian noise determines the probability distribution function and hence may denote the types of noise,this result shows that different types of external noise can enhance the ISRO of CO oxidation,and non-Gaussian noise may enhance the ISRO more greatly than the Gaussian noise.Therefore,non-Gaussian noise could play more effective roles in the catalytic process of CO oxidation on nanometer-sized Pd particles.

Specific targeting of angiogenesis in lung cancer with RGD-conjugated ultrasmall superparamagnetic iron oxide particles using a 4.7T magnetic resonance scanner

Background Angiogenesis is an essential step for tumor development and metastasis.The cell adhesion molecule αvβ3 integrin plays an important role in angiogenesis and is a specific marker of tumor angiogenesis.A novel αvβ3 integrintargeted magnetic resonance （MR） imaging contrast agent utilizing Arg-Gly-Asp （RGD） and ultrasmall superparamagnetic iron oxide particles （USPIO） （referred to as RGD-USPIO） was designed and its uptake by endothelial cells was assessed both in vitro and in vivo to evaluate the angiogenic profile of lung cancer.Methods USPIO were coated with-NH3＋ and conjugated with RGD peptides.Prussian blue staining was performed to evaluate the specific uptake of RGD-USPIO by human umbilical vein endothelial cells （HUVECs）.Targeted uptake and subcellular localization of RGD-USPIO in HUVECs were confirmed by transmission electron microscopy （TEM）.The ability of RGD-USPIO to noninvasively assess αvβ3 integrin positive vessels in lung adenocarcinoma A549 tumor xenografts was evaluated with a 4.7T MR scanner.Immunohistochemistry was used to detect αvβ3 integrin expression and vessel distribution in A549 tumor xenografts.Results HUVECs internalized RGD-USPIO significantly more than plain USPIO.The uptake of RGD-USPIO by HUVECs could be competitively inhibited by addition of free RGD.A significant decrease in T2 signal intensity （SI） was observed at the periphery of A549 tumor xenografts at 30 minutes （P 〈0.05） and 2 hours （P 〈0.01） after RGD-USPIO was injected via the tail vein.Angiogenic blood vessels were mainly distributed in the periphery of tumor xenografts with positive αvβ3 integrin expression.Conclusions RGD-USPIO could specifically label αvβ3 integrin and be taken up by HUVECs.This molecular MR imaging contrast agent can specifically evaluate the angiogenic profile of lung cancer using a 4.7T MR scanner.

Microstructure and Tribological Behavior of a TiO_2/hBN Composite Ceramic Coating Formed via Micro-arc Oxidation of Ti–6Al–4V Alloy

A composite coating containing hexagonal boron nitride（hBN） particles and titanium oxide（TiO_2） was formed on the surface of Ti-6Al-4V alloy via micro-arc oxidation（MAO）. The effect of quantity of the hBN-particles added into electrolyte on microstructure, composition, and wear behavior of the resulting composite coatings was investigated. Microstructure, phase composition, and tribological behavior of the resulting MAO coatings were evaluated via scanning electron microscopy, X-ray diffraction, and ball-on-disc abrasive tests. The results reveal that the TiO_2/hBN composite coating consisting of rutile TiO_2, anatase TiO_2, and an hBN phase was less porous than particle-free coating. Furthermore, the presence of hBN particles in the MAO coating produced an improved anti-friction property. The composite coating produced in the electrolyte containing 2 g/L of hBN particles exhibited the best wear resistance.The outer loose layer of the MAO coatings was removed by a mechanical polishing process, which led to a significant improvement in the wear resistance and anti-friction properties of the MAO coatings and highlighted an essential lubricating role of hBN particles in the composite coatings. However, wear mechanism of the MAO coatings was not relevant to the presence of hBN particles, where fatigue wear dominated the anti-fraction properties of the MAO coatings with and without hBN particles.

Detection of neural stem cells function in rats with traumatic brain injury by manganese-enhanced magnetic resonance imaging

Background Previously we had successfully tracked adult human neural stem cells （NSCs） labeled with superparamagnetic iron oxide particles （SPIOs） in host human brain after transplantation in vivo non-invasively by magnetic resonance imaging （MRI）. However, the function of the transplanted NSCs could not be evaluated by the method. In the study, we applied manganese-enhanced MRI （ME-MRI） to detect NSCs function after implantation in brain of rats with traumatic brain injury （TBI） in vivo. Methods Totally 40 TBI rats were randomly divided into 4 groups with 10 rats in each group. In group 1, the TBI rats did not receive NSCs transplantation. MnCI2＂4H20 was intravenously injected, hyperosmolar mannitol was delivered to disrupt rightside blood brain barrier, and its contralateral forepaw was electrically stimulated. In group 2, the TBI rats received NSCs （labeled with SPIO） transplantation, and the ME-MRI procedure was same to group 1. In group 3, the TBI rats received NSCs （labeled with SPIO） transplantation, and the ME-MRI procedure was same to group 1, but diltiazem was introduced during the electrical stimulation period. In group 4, the TBI rats received phosphate buffered saline （PBS） injection, and the ME-MRI procedure was same to group 1. Results Hyperintense signals were detected by ME-MRI in the cortex areas associated with somatosensory in TBI rats of group 2. These signals, which could not be induced in TBI rats of groups 1 and 4, disappeared when diltiazem was introduced in TBI rats of group 3. Conclusion In this initial study, we mapped implanted NSCs activity and its functional participation within local brain area in TBI rats by ME-MRI technique, paving the way for further pre-clinical research.