Precision tuning of highly efficient Pt-based ternary alloys on nitrogen-doped multi-wall carbon nanotubes for methanol oxidation reaction

The electrochemical methanol oxidation is a crucial reaction in the conversion of renewable energy.To enable the widespread adoption of direct methanol fuel cells(DMFCs),it is essential to create and engineer catalysts that are both highly effective and robust for conducting the methanol oxidation reaction(MOR).In this work,trimetallic PtCoRu electrocatalysts on nitrogen-doped carbon and multi-wall carbon nanotubes(PtCoRu@NC/MWCNTs)were prepared through a two-pot synthetic strategy.The acceleration of CO oxidation to CO_(2) and the blocking of CO reduction on adjacent Pt active sites were attributed to the crucial role played by cobalt atoms in the as-prepared electrocatalysts.The precise control of Co atoms loading was achieved through precursor stoichiometry.Various physicochemical techniques were employed to analyze the morphology,element composition,and electronic state of the catalyst.Electrochemical investigations and theoretical calculations confirmed that the Pt_(1)Co_(3)Ru_(1)@NC/MWCNTs exhibit excellent electrocatalytic performance and durability for the process of MOR.The enhanced MOR activity can be attributed to the synergistic effect between the multiple elements resulting from precisely controlled Co loading content on surface of the electrocatalyst,which facilitates efficient charge transfer.This interaction between the multiple components also modifies the electronic structures of active sites,thereby promoting the conversion of intermediates and accelerating the MOR process.Thus,achieving precise control over Co loading in PtCoRu@NC/MWCNTs would enable the development of high-performance catalysts for DMFCs.

Revealing interfacial charge redistribution of homologous Ru-RuS_(2) heterostructure toward robust hydrogen oxidation reaction

Precisely tailoring the surface electronic structures of electrocatalysts for optimal hydrogen binding energy and hydroxide binding energy is vital to improve the sluggish kinetics of hydrogen oxidation reac-tion(HOR).Herein,we employ a partial desulfurization strategy to construct a homologous Ru-RuS_(2) heterostructure anchored on hollow mesoporous carbon nanospheres(Ru-RuS_(2)@C).The disparate work functions of the heterostructure contribute to the spontaneous formation of a unique built-in electric field,accelerating charge transfer and boosting conductivity of electrocatalyst.Consequently,Ru-RuS_(2)@C exhibits robust HOR electrocatalytic activity,achieving an exchange current density and mass activity as high as 3.56 mA cm^(-2) and 2.13 mAμg_(Ru)^(-1),respectively.exceeding those of state-of-the-art Pt/C and most contemporary Ru-based HOR electrocatalysts.Surprisingly,Ru-RuS_(2)@C can tolerate 1000 ppm of cO that lacks in Pt/C.Comprehensive analysis reveals that the directional electron transfer across Ru-RuS_(2) heterointerface induces local charge redistribution in interfacial region,which optimizes and balances the adsorption energies of H and OH species,as well as lowers the energy barrier for water formation,thereby promoting theHoR performance.

Boosted Electrocatalytic Glucose Oxidation Reaction on Noble-Metal-Free MoO_(3)-Decorated Carbon Nanotubes

Electrocatalytic glucose oxidation reaction(GOR)has attracted much attention owing to its crucial role in biofuel cell fabrication.Herein,we load MoO_(3)nanoparticles on carbon nanotubes(CNTs)and use a discharge process to prepare a noblemetal-free MC-60 catalyst containing MoO_(3),Mo_(2)C,and a Mo_(2)C–MoO_(3)interface.In the GOR,MC-60 shows activity as high as 745μA/(mmol/L cm^(2)),considerably higher than those of the Pt/CNT(270μA/(mmol/L cm^(2)))and Au/CNT catalysts(110μA/(mmol/L cm^(2))).In the GOR,the response minimum on MC-60 is as low as 8μmol/L,with a steady-state response time of only 3 s.Moreover,MC-60 has superior stability and anti-interference ability to impurities in the GOR.The better performance of MC-60 in the GOR is attributed to the abundant Mo sites bonding to C and O atoms at the MoO_(3)–Mo_(2)C interface.These Mo sites create active sites for promoting glucose adsorption and oxidation,enhancing MC-60 performance in the GOR.Thus,these results help to fabricate more effi cient noble-metal-free catalysts for the fabrication of glucose-based biofuel cells.

RuO_(2)-PdO nanowire networks with rich interfaces and defects supported on carbon toward the efficient alkaline hydrogen oxidation reaction

Interfacial engineering is a promising approach for enhancing electrochemical performance,but rich and efficient interfacial active sites remain a challenge in fabrication.Herein,RuO_(2)-PdO heterostructure nanowire networks(NWs) with rich interfaces and defects supported on carbon(RuO_(2)-PdO NWs/C) for alkaline hydrogen oxidation reaction(HOR) was formed by a seed induction-oriented attachment-thermal treatment method for the first time.As expected,the RuO_(2)-PdO NWs/C(72.8% Ru atomic content in metal) exhibits an excellent activity in alkaline HOR with a mass specific exchange current density(jo,m) of 1061 A gRuPd-1,which is 3.1 times of commercial Pt/C and better than most of the reported nonPt noble metal HOR electrocatalysts.Even at the high potential(~0.5 V vs.RHE) or the presence of CO(5 vol%),the RuO_(2)-PdO NWs/C still effectively catalyzes the alkaline HOR.Structure/electrochemical analysis and theoretical calculations reveal that the interfaces between RuO_(2) and PdO act as the active sites.The electronic interactions between the two species and the rich defects for the interfacial active sites weaken the adsorption of Had,also strengthen the adsorption of OHad,and accelerate the alkaline HOR process.Moreover,OHadon RuO_(2) can spillover to the interfaces,keeping the RuO_(2)-PdO NWs/C with the stable current density at higher potential and high resistance to CO poisoning.

Efficient solar fuel production enabled by an iodide oxidation reaction on atomic layer deposited MoS_(2)

Oxygen evolution reaction(OER)as a half-anodic reaction of water splitting hinders the overall reaction efficiency owing to its thermodynamic and kinetic limitations.Iodide oxidation reaction(IOR)with low thermodynamic barrier and rapid reaction kinetics is a promising alternative to the OER.Herein,we present a molybdenum disulfide(MoS_(2))electrocatalyst for a high-efficiency and remarkably durable anode enabling IOR.MoS_(2)nanosheets deposited on a porous carbon paper via atomic layer deposition show an IOR current density of 10 mA cm^(–2)at an anodic potential of 0.63 V with respect to the reversible hydrogen electrode owing to the porous substrate as well as the intrinsic iodide oxidation capability of MoS_(2)as confirmed by theoretical calculations.The lower positive potential applied to the MoS_(2)-based heterostructure during IOR electrocatalysis prevents deterioration of the active sites on MoS_(2),resulting in exceptional durability of 200 h.Subsequently,we fabricate a two-electrode system comprising a MoS_(2)anode for IOR combined with a commercial Pt@C catalyst cathode for hydrogen evolution reaction.Moreover,the photovoltaic–electrochemical hydrogen production device comprising this electrolyzer and a single perovskite photovoltaic cell shows a record-high current density of 21 mA cm^(–2)at 1 sun under unbiased conditions.

Greatly Enhanced Methanol Oxidation Reaction of CoPt Truncated Octahedral Nanoparticles by External Magnetic Fields

Tunable behavior in electrocatalysis by external multifields,such as magnetic field,thermal field,and electric field,is the most promising strategy to expand the theory,design,and synthesis of state-of-the-art catalysts and the cell in the near future.Here,a systematic investigation for the effect of external magnetic field and thermal field on methanol oxidation reactions(MOR)in magnetic nanoparticles is reported.For Co_(42)Pt_(58)truncated octahedral nanoparticles(TONPs),the catalytic performance in MOR is greatly increased to the maximum of 14.1%by applying a magnetic field up to 3000 Oe,and it shows a monotonical increase with increasing working temperature.The magnetic enhanced effect is closely related to the Co content of Co_(x)Pt_(100-x)TONPs.Furthermore,the enhancement effect under a magnetic field is more obvious for Co_(42)Pt_(58)TONPs annealed at 650℃.First-principle calculation points out that the magnetic fields can facilitate the dehydrogenation of both methanol and water by suppression of entropy of the electron spin and lowering of the activation barrier,where OH_(ad)intermediates on Co sites play a more important role.The application of magnetic fields together with thermal fields in MOR provides a new prospect to manipulate the performance of direct methanol fuel cells,which will accelerate their potential applications.

Rational design ternary platinum based electrocatalysts for effective methanol oxidation reaction

Exploring effective, durable, and affordable electrocatalysts of methanol oxidation reaction(MOR) is of vital significance for the industrial application of direct methanol fuel cells. Herein, an efficient, general,and expandable method is developed to synthesis two-dimensional(2D) ternary Pt Bi M nanoplates(NPLs), in which various M(Co, Ni, Cu, Zn, Sn) is severed as the third component to the binary Pt Bi system. The MOR performance of Pt Bi M NPLs is entirely investigated, demonstrating that both the MOR activity and durability is enhanced with the introduction of the additional composition. Pt3Bi3Zn NPLs shows much higher MOR activity and stability than that of the Pt Bi counterparts, not to mention the current advanced Pt Ru/C and Pt/C catalysts. The prominent performances are attributed to the modulated electronic structure of the surface Pt in Pt Bi NPLs by the addition of Zn, resulting in a weakened affination between Pt and the adsorbed poisoning species(mainly CO) compared with Pt Bi NPLs, verified by density functional theory(DFT) calculations. In addition, the absorbed OH can be generated on the surface of Zn atom due to its favorable water activation properties, thus the CO removal on the adjacent Pt atoms is accelerated, further leading to a high activity and anti-poisoning performance of the resulting Pt_(3)Bi_(3)Zn catalyst. This work provides new insights and robust strategy for highly efficient MOR electrocatalyst with extraordinary anti-poisoning performance and stability.

Recent advances in alkaline hydrogen oxidation reaction

The development of highly efficient electrocatalysts toward hydrogen oxidation reaction(HOR)under alkaline media is essential for the commercialization of alkaline exchange membrane fuel cells(AEMFCs).However,the HOR kinetics in alkaline is two to three orders of magnitude slower than that in acid.More critically,fundamental understanding of the sluggish kinetics derived from the p H effect is still debatable.In this review,the recent development of understanding HOR mechanism and rational design of advanced HOR electrocatalysts are summarized.First,recent advances in the theories focusing on fundamental understandings of HOR under alkaline electrolyte are comprehensively discussed.Then,from the aspect of intermediates binding energy,optimizing hydrogen binding energy(HBE)and increasing hydroxyl binding energy(OHBE),the strategies for designing efficient alkaline HOR catalysts are summarized.At last,perspectives for the future research on alkaline HOR are pointed out.

Nitrogen vacancies enriched Ce-doped Ni_(3)N hierarchical nanosheets triggering highly-efficient urea oxidation reaction in urea-assisted energy-saving electrolysis

Urea oxidation reaction (UOR),which has favorable thermodynamic energy barriers compared with oxygen evolution reaction (OER),can provide more cost-effective electrons for the renewable energy systems,but is trapped by its sluggish UOR kinetics and intricate reaction intermediates formation/desorption process.Herein,we report a novel and effective electrocatalyst consisting of carbon cloth supported nitrogen vacancies-enriched Ce-doped Ni_(3)N hierarchical nanosheets (Ce-Ni_(3)N @CC) to optimize the flat-footed UOR kinetics,especially the stiff rate-determine CO_(2)desorption step of UOR.Upon the introduction of valance state variable Ce,the resultant nitrogen vacancies enriched Ce-Ni_(3)N @CC exhibits an enhanced UOR performance where the operation voltage requires only 1.31 V to deliver the current density of 10 mA cm^(-2),which is superior to that of Ni_(3)N @CC catalyst (1.36 V) and other counterparts.Density functional theory (DFT) results demonstrate that the incorporation of Ce in Ni_(3)N lowers the formation energy of nitrogen vacancies,resulting in rich nitrogen vacancies in Ce-Ni_(3)N @CC.Moreover,the nitrogen vacancies together with Ce doping optimize the local charge distribution around Ni sites,and balance the adsorption energy of CO_(2)in the rate-determining step (RDS),as well as affect the initial adsorption structure of urea,leading to the superior UOR catalytic performance of Ce-Ni_(3)N @CC.When integrating the Ce-Ni_(3)N catalyst in UOR//HER and UOR//CO_(2)R flow electrolyzer,both of them perform well with low operation voltage and robust long-term stability,proofing that the thermodynamically favorable UOR can act as a suitable substitute anodic reaction compared with that of OER.Our findings here not only provide a novel UOR catalyst but also offer a promising design strategy for the future development of energy-related devices.

Improved hydrogen oxidation reaction under alkaline conditions by Au–Pt alloy nanoparticles

This work demonstrates the outstanding performance of alloyed Au1 Pt1 nanoparticles on hydrogen oxidation reaction(HOR)in alkaline solution.Due to the weakened hydrogen binding energy caused by uniform incorporation of Au,the alloyed Au1Pt1/C nanoparticles exhibit superior HOR activity than commercial PtRu/C.On the contrary,the catalytic performance of the phase-segregated Au2Pt1/C and Au1Pt1/C bimetallic nanoparticles in HOR is significantly worse.Moreover,Au1Pt1/C shows a remarkable durability with activity dropping only 4% after 3000 CV cycles,while performance attenuation of commercial PtRu/C is high up to 15% under the same condition.Our results indicate that the alloyed Au1Pt1/C is a promising candidate to substitute commercial PtRu/C for hydrogen oxidation reaction in alkaline electrolyte.

Simple Preparation of Crystal Co_3(BTC)_2·12H_2O and Its Catalytic Activity in CO Oxidation Reaction

Crystalline metal-organic framework cobalt （II） benzenetricarboxylate C%（BTC）2·12H2O （MOF-Co） has been prepared using solvothermal method. The reaction of cobalt （II） nitrate and 1,3,5-benzenetriearboxylic （BTC） acid in a mixed solution of N,N-dimethylformarnide （DMF）/C2H5OH/H2O （1：1：1, v/v） at low temperature for short reaction times produced this crystalline compound. Compared with traditional hydrothermal method, a mixed solution method for the synthesis of crystalline metal complex was found to be highly efficient. After water molecules were removed from this metal complex, its exposed nodes served as active sites. When this MOF-Co was employed in the oxidation of CO, it showed good catalytic properties causing 100% conversion of CO to CO2 at low temperature of 160 ℃.

Hydrogen evolution-assisted one-pot aqueous synthesis of hierarchical trimetallic PdNiRu nanochains for hydrazine oxidation reaction

A hydrogen evolution-assisted one-pot aqueous approach was developed for facile synthesis of trimetallic Pd Ni Ru alloy nanochain-like networks（Pd Ni Ru NCNs） by only using KBHas the reductant, without any specific additive（e.g. surfactant, polymer, template or seed）. The products were mainly investigated by transmission electron microscopy（TEM）, X-ray diffraction（XRD） and X-ray photoelectron spectroscopy（XPS）. The hierarchical architectures were formed by the oriented assembly growth and the diffusioncontrolled deposition in the presence of many in-situ generated hydrogen bubbles. The architectures had the largest electrochemically active surface area（ECSA） of 84.32 mgPdthan Pd Ni nanoparticles(NPs,65.23 mgPd), Pd Ru NPs(23.12 mgPd), Ni Ru NPs（nearly zero）, and commercial Pd black(6.01 mgPd), outperforming the referenced catalysts regarding the catalytic characters for hydrazine oxygen reaction（HOR）. The synthetic route provides new insight into the preparation of other trimetallic nanocatalysts in fuel cells.

Robust copper nanocrystal/nitrogen-doped carbon monoliths as carbon monoxide-resistant electrodes for methanol oxidation reaction

Noble metal-based electrocatalysts present high activities for methanol oxidation reaction(MOR),but are limited by their high cost,low stability and poor resistance to carbon monoxide(CO) poisoning.The development of active and stable non-noble metal electrocatalysts for MOR is desired,but remains a challenge.Herein,we report a simple strategy to make copper nanocrystal/nitrogen-doped carbon(Cu/N-C)monoliths,which can serve as active and robust electrodes for MOR.Copper nanocrystals were electrochemically deposited onto a conductive polyaniline hydrogel and calcined to form Cu/N-C monolith,where the active copper nanocrystals are protected by nitrogen-doped carbon.Owing to their extremely high electrical conductivity(1.25 × 10^(5) S cm^(-1)) and mechanical robustness,these Cu/N-C monoliths can be directly used as electrodes for MOR,without using substrates or additives.The optimal Cu/N-C(FT)@500 monolith shows a high MOR activity of 189 mA cm^(-2) at 0.6 V vs.SCE in alkaline methanol solution,superior to most of reported Cu-based MOR catalysts.Cu/N-C(FT)@500 also presents a better stability than Pt/C catalyst in the long-term MOR test at high current densities.Upon carbon monoxide(CO) poisoning,Cu/N-C(FT)@500 retains 96% of its MOR activity,far exceeding the performance of Pt/C catalyst(61% retention).Owing to its facile synthesis,outstanding activity,high stability and mechanical robustness,Cu/N-C(FT)@500 monolith is promising as a low-cost,efficient and CO-resistant electrocatalyst for MOR.

Characteristics of Oxidation Reaction of Rare-Earth Chlorides in Eutectic Chloride Melt

Oxidation reaction of rare earth chlorides(Ce/Pr/Nd/EuCl3) in a LiCl-KCl eutectic molten salt was carried out using an oxygen sparging method. Regardless of the sparging time and the molten salt temperature, oxychlorides (NdOCl, PrOCl) and oxides(CeO, Eu2O3, PrO2) were formed as a oxidation products(i.e. precipitates) by the reaction with oxygen. The conversion efficiency of the rare earth elements to the precipitates increases with the sparging time and the molten salt temperature. In the conditions of 650 ℃ of a molten salt temperature and 420 min of a sparging time, the values of the conversion efficiency of the used rare earth chlorides were over 99.9%. Information on the hydrodynamics of an oxygen-molten salt two phase flow system is essential since its hydrodynamics strongly affect the oxidation reaction of rare earth elements in an eutectic chloride melts.

Two-dimensional bimetallic coordination polymers as bifunctional evolved electrocatalysts for enhanced oxygen evolution reaction and urea oxidation reaction

Two-dimensional coordination polymers(CPs) have aroused tremendous interest as electrocatalysts because the catalytic performance could be fine-tuned by their well-designed coordination layers with highly accessible and active metal sites.However,it remains great challenge for CP-based catalysts to be utilized for electrocatalytic oxidation reactions due to their inefficient activities and low catalytic stabilities.Herein,we applied a mixed-metal strategy to fabricate two-dimensional Co_xNi_(1-x)-CPs with dual active sites for electrocatalytic water and urea oxidation.By metal ratio regulation in the twodimensional layer,an optimized Co_(2/3)Ni_(1/3)-CP exhibits a water oxidation performance with an overpotential of 325 mV at a current density of 10 mA cm^(-2) and a Tafel slope of 86 mV dec^(-1) in alkaline solution for oxygen evolution reaction.Importantly,a lower potential than that of commercial RuO_(2) is observed over20 mA cm^(-2).Co_(2/3)Ni_(1/3)-CP also displays a potential of 1.381 V at 10 mA cm^(-2) for urea oxidation reaction and a Tafel slope of 124 mV dec^(-1).This mixed-metal strategy to maximize synergistic effect of different metal centers may ultimately lead to promising electrocatalysts for small molecule oxidation reaction.

A Pt/MnV_(2)O_(6) nanocomposite for the borohydride oxidation reaction

Problems associated with carbon support corrosion under operating fuel cell conditions require the identification of alternative supports for platinum-based nanosized electrocatalysts.Platinum supported on manganese vanadate(Pt/MnV_(2)O_(6))was prepared by microwave irradiation method and characterized using X-ray diffraction,Fourier-transform infrared spectroscopy,X-ray photoelectron spectroscopy,scanning electron microscopy with energy dispersive spectroscopy,and transmission electron microscopy.The borohydride oxidation reaction(BOR)on Pt/MnV_(2)O_(6) was studied in highly alkaline media using voltammetry,chronoamperometry,and electrochemical impedance spectroscopy.BOR electrocatalytic activity of Pt/MnV_(2)O_(6) was also compared with that of commercial Pt/C(46 wt%Pt)electrocatalyst.The apparent activation energy of BOR at Pt/MnV_(2)O_(6) was estimated to be 32 k J mol^(-1) and the order of reaction to be 0.51,indicating that borohydride hydrolysis proceeds in parallel with its oxidation.Long-term stability of Pt/MnV_(2)O_(6) under BOR typical conditions was observed.A laboratory-scale direct borohydride fuel cell assembled with a Pt/MnV_(2)O_(6) anode reached a specific power of 274 W g^(-1).Experimental results on Pt/MnV_(2)O_(6) were complemented by DFT calculations,which indicated good adherence of Pt to MnV_(2)O_(6),beneficial for electrocatalyst stability.

A rational design of bimetallic PdAu nanoflowers as efficient catalysts for methanol oxidation reaction

Methanol fuel cells have been intensively developed as clean and high-efficiency energy conversion system due to their high efficiency and low emission of pollutants.Here,we developed a simple aqueous synthetic method to prepare bimetallic PdAu nanoflowers catalysts for methanol oxidation reaction(MOR)in alkaline environment.Their composition can be directly tuned by changing the ratio between Pd and Au precursors.Compared with commercial Pd/C catalyst,all of the PdAu nanoflowers catalysts show the enhanced catalytic activity and durability.In particular,the PdAu nanoflowers specific activity reached 0.72 mA/cm^(2),which is 14 times that of commercial Pd/C catalyst.The superior MOR activity could be attributed to the unique porous structure and the shift of the d-band center of Pd.

A QUANTITATIVE STUDY ON ENHANCEMENT OF TYPE Ⅱ PHOTOSENSITIZED OXIDATION REACTION RATE BY HEAVY WATER

A method for quantitative evaluating the enhancement of the rate of Type Ⅱ photosensitized oxidation by D_2O was suggested. The effect of substrate concentration on this process was also discussed.

Rhodium Nanoparticle-Loaded Carbon Black Electrocatalyst for the Glycerol Oxidation Reaction in Alkaline Medium

Rhodium nanoparticle-loaded carbon black (Rh/CB) was prepared by a wet method, and its activity and durability for glycerol oxidation reaction (GOR) in alkaline medium were compared with Pt, Pd and Au nanoparticle-loaded CB (Pt/CB, Pd/CB and Au/CB). In the cyclic voltammogram of the Rh/CB electrode, the redox waves due to hydrogen adsorption/desorption and the surface OH monolayer formation/reduction were observed at more negative potentials than the Pt/CB and Pd/CB electrodes. The onset and peak potentials of the GOR current densities for the Rh/CB electrode were ca. –0.55 and –0.30 V vs. Hg/HgO, respectively, which were 0.10 and 0.20 V more negative than the Pt/CB electrode whose GOR activity was the best, indicating that Rh was a fascinating metal for reducing the overpotential for GOR. In the electrostatic electrolysis with the Rh/CB and Pt/CB electrodes, the decrease in the GOR current density in the former with time was suppressed compared to that in the latter, suggesting that the tolerance to poisoning for the Rh/CB electrode was superior to that for the Pt/CB electrode.

PtAg Nanoparticle Electrocatalysts for the Glycerol Oxidation Reaction in Alkaline Medium

To improve the activity for glycerol oxidation reaction (GOR) of Pt, PtAg (mole ratio of Pt/Ag = 3 and 1) alloy nanoparticle-loaded carbon black (Pt/CB, PtAg(3:1)/CB, PtAg(1:1)/CB) catalysts were prepared by a wet method. The resultant catalysts, moreover, were heat-treated in a N2 atmosphere at 200°C. The alloying of Pt with Ag for each PtAg/CB was confirmed by X-ray diffractometry and electron dispersive X-ray spectrometry. The heat-treatment did not change the crystal structure of the PtAg alloys and increased their particle size. X-ray photoelectron spectroscopy exhibited that stabilizers were completely removed from the PtAg alloy surface, and the Pt4f and Ag3d doublets due to metallic Pt and Ag, respectively, shifted to lower binding energies, supporting the alloying of Pt with Ag. Both PtAg/CB electrodes had two oxidation waves of glycerol irrespective of heat-treatment, which was different from the Pt/CB electrode. The onset potential of the first oxidation wave was -0.60 V, which was 0.20 V less positive than that for the Pt/CB electrode, indicating the alloying of Pt with Ag greatly improved the GOR activity of Pt. The heat-treated PtAg(3:1)/ CB electrode improved the GOR current density of the second oxidation peak. In the potentiostatic electrolysis at -0.1 and 0 V for both PtAg/CB electrodes, the ratio of oxidation current density at 60 min to that at 5 min (j60/j5), an indicator of the catalyst deterioration, at 0 V was higher than that at -0.1 V, because the adsorbed oxidation intermediates were greatly consumed at the larger overpotential. The heat-treatment of the PtAg(3:1)/CB electrode increased the j60/j5 value at -0.1 V but decreased that at 0 V. This could be attributed to the formation of high-order oxidation intermediates which might have stronger poisoning effect.