Invariance and Noises of Shannon Entropy for Information on Oxidative Activity of DNA in All Living Cells for Medical Diagnostics

We analyze oxidative activity of DNA due to fluorescence of chromosomes inside cells, using flow cytometry method with nanometer spatial resolution. Statistics of fluorescence is presented in histogram as frequency distributions of flashes in the dependence on their intensity and in distributions of Shannon entropy, which was defined on the base of normalized distribution of information in original histogram for frequency of flashes. We show that overall sum of entropy, i.e. total entropy E , for any histogram is invariant and has identical trends of changes all values of E(r) = lnr at reduction of histogram’ rank r. This invariance reflects informational homeostasis of chromosomes activity in multi-scale networks of entropy inside all cells in various samples of blood for DNA inside neutrophils, lymphocytes, inside all leukocytes of human and inside chicken erythrocytes for various dyes, colors and various excitations of fluorescence. Informational homeostasis of oxidative activity of 3D DNA in the full set of chromosomes inside living cells exists for any Shannon-Weaver index of biodiversity of cells, at any state of health different beings. Regulation perturbations in information activity DNA provides informational adaptability and vitality of cells at homeostasis support. Noises of entropy, during regulation of informational homeostasis, depend on the states of health in real time. The main structural reconstructions of chromosomal correlations, corresponding to self-regulation of homeostasis, occur in the most large-scale networks of entropy, for rank r<32. We show that stability of homeostasis is supported by activity of all 46 chromosomes inside cells. Patterns, hidden switching and branching in sequences of averages of H?lder and central moments for noises in regulation of homeostasis define new opportunities in diagnostics of health and immunity. All people and all aerobic beings have one overall homeostatic level for countdown of information activity of DNA inside cells. We noted very bad and dangerous properties of artificial cells with other levels of informational homeostasis for all aerobic beings in foods, medical treatment and in biotechnologies.

Characterization of apparent sulfur oxidation activity of thermophilic archaea in bioleaching of chalcopyrite

The apparent sulfur oxidation activities of four pure thermophilic archaea, Acidianus brierleyi （JCM 8954）, Metallosphaera sedula （YN 23）, Acidianus manzaensis （YN 25） and Sulfolobus metallicus （YN 24） and their mixture in bioleaching chalcopyrite were compared, which were characterized indirectly by the evolution of the cells concentration, pH value and sulfate ions concentration in solution. The results show that the mixed culture contributed significantly to the raising of leaching rate, which suggests that the mixed culture had a higher sulfur oxidation activity than the pure culture. Meanwhile, the results also indicate that the changes of parameters characterizing the sulfur oxidation activity of thermophilic archaea are often influenced by many factors, so it is hard to reflect accurately the specific sulfur oxidation activities among the different sulfur-oxidizing microbes when bioleaching chalcopyrite at different conditions. Accordingly, an efficient method to characterize microbial sulfur oxidation activity appears to be desirable.

Electrochemically reduced graphene oxide with enhanced electrocatalytic activity toward tetracycline detection

An electrochemically reduced graphene oxide sample, ERGO_0.8v, was prepared by electrochemical reduction of graphene oxide （GO） at -0.8 V, which shows unique electrocatalytic activity toward tetracycline （TTC） detection compared to the ERGO-12v （GO applied to a negative potential of-1.2 V）, GO, chemically reduced GO （CRGO）-modified glassy carbon electrode （GC） and bare GC electrodes. The redox peaks of TTC on an ERGO-0.8v-modifled glass carbon electrode （GC/ERGO-0.8v） were within 0-0.5 V in a pH 3.0 buffer solution with the oxidation peak current correlating well with TTC concentration over a wide range from 0.1 to 160 mg/L Physical characterizations with Fourier transform infrared （FT-IR）, Raman, and X-ray photoelectron spectroscopies （XPS） demonstrated that the oxygen-containing functional groups on GO diminished after the electrochemical reduction at -0.8 V, yet still existed in large amounts, and the defect density changed as new sp2 domains were formed. These changes demonstrated that this adjustment in the number of oxygen-containing groups might be the main factor affecting the electrocatalytic behavior of ERGO. Additionally, the defect density and sp2 domains also exert a profound influence on this behavior. A possible mechanism for the TTC redox reaction at the GC/ERGO-0.8v electrode is also presented. This work suggests that the electrochemical reduction is an effective method to establish new catalytic activities of GO by setting appropriate parameters.

Bacterial oxidation activity in heap leaching

Bioleaching of sulfide minerals by bacteria, mainly Thiobacillus ferrooxidans(T.f.) and Thiobacillus thiooxidans, plays an important role in hydrometallurgy because of its economic and environmental attractions. The surveys of production process and the bacterial oxidation activity in the heap bioleaching were investigated. The results show that pH value is high, bacteria biomass and ferric concentration are low, generation time (above 7.13 h) is long in leachate, and less bacteria are adsorbed on the ores. The bacteria in the leachate exposing on the surface and connecting with mineral, have much faster oxidation rate of Fe(Ⅱ) and shorter generation time, compared with those which are in the reservoir for a long time. There is diversity for oxidation activity of Fe(Ⅱ), while there is no diversity for oxidation of sulfur. So it is advisable to add sulfuric acid to degrade pH value to 2.0, add nutrients and shorten recycling time of leachate, so as to enhance bacteria concentration of leachate and the leaching efficiency.

Electron Donating Property and Catalytic Activity ofPerovskite-type Mixed Oxides (ABO_3) Consisting of Rare Earth and 3d Transition Metals

The catalytic activity of Perovskite-type mixed oxides (LaCoO3, PrCoO3 and SmCoO3) for the reduction of cyclohexanone to cyclohexanol with 2-propanol (Meerwein-PonndorfVerley reduction) has been studied. The data have been correlated with the surface electron donor properties of these mixed oxides

SnO_2 nano-sheet as an efficient catalyst for CO oxidation

Polycrystalline SnO2 fine powder consisting of nano-particles （SnO2-NP）, SnO2 nano-sheets （SnO2-NS）, and SnO2 containing both nano-rods and nano-particles （SnO2-NR＋NP） were prepared and used for CO oxidation. SnO2-NS possesses a mesoporous structure and has a higher surface area, larger pore volume, and more active species than SnO2-NP, and shows improved activity. In contrast, although SnO2-NR＋NP has only a slightly higher surface area and pore volume, and slightly more active surface oxygen species than SnO2-NP, it has more exposed active （110） facets, which is the reason for its improved oxidation activity. Water vapor has only a reversible and weak influence on SnO2-NS, therefore it is a potential catalyst for emission control processes.

A binder-free, flexible cathode for rechargeable Na-O_2 batteries

Rechargeable Na-O2 batteries have attracted significant attention as energy storage devices owing to their theoretically high energy storage capacity and the natural abundance of sodium. However, practical applications of this type of battery still suffer from low specific capability, poor cycle sta- bility, instable electrolytes, and unstable polymer binders. Herein, we report a facile method of synthesizing binder free and flexible cathodes with C0304 nanowire arrays vertically grown onto carbon textiles. When employed as a cathode for Na-O2 batteries, this cathode exhibits superior performance, including a reduction of charge overpotential, high specific capacity （4687 mAh/g）, and cycle stability up to 62 cycles. These enhanced performance can be attributed to the synergistic effect of the porosity and catalytic activity of the C0304 nanowire catalyst.

Enhanced cycle performance of Li/S battery with the reduced graphene oxide/activated carbon functional interlayer

The high-energy lithium/sulfur(Li/S) battery has become a very popular topic of research in recent years due to its high theoretical capacity of 1672 m Ah/g. However, the polysulfide shuttle effect remains of great concern with a great number of publications dedicated to its mitigation. In this contribution, a three-dimensional(3D) reduced graphene oxide/activated carbon(RGO/AC) film, synthesized by a simple hydrothermal method and convenient mechanical pressing, is sandwiched between the separator and the sulfur-based cathode, acting as a functional interlayer to capture and trap polysulfide species. Consequently, the Li/S cell with this interlayer shows an impressive initial discharge capacity of 1078 m Ah/g and a reversible capacity of 655 m Ah/g even after 100 cycles. The RGO/AC interlayer impedes the movement of polysulfide while providing unimpeded channels for lithium ion mass transfer. Therefore, the RGO/AC interlayer with a well-designed structure represents strong potential for high-performance Li/S batteries.

Catalytic Performance of Carbon Materials Supported Pd Nanoparticles in Selective Hydrogenation of Acetylene

Pd/C catalysts were prepared by deposited Pd nanoparticles （NPs） on different carbon supports including activated carbon （AC）, graphite oxide （GO）, and reduced graphite oxide （rGO） using sol-immobilization method. Through transmission electron microscopy, powder X-ray di raction, and X-ray photoelectron spectroscopy, the role of the carbon supports for the catalytic performances of Pd/C catalysts was examined in selective hydrogenation of acetylene. The results indicate that Pd/AC exhibited higher activity and selectivity than Pd/GO and Pd/rGO in the gas phase selective hydrogenation of acetylene. Thermal and chemical treatment of AC supports also have some effect on the catalytic performance of Pd/AC catalysts. The differences in the activity and selectivity of various Pd/C catalysts were partly attributed to the metal-support interaction.

Immobilized reactor for rapid destruction of recalcitrant organics and inorganics in tannery wastewater

The wastewater discharged from tanneries lack biodegradability due to the presence of recalcitrant compounds at significant concentration. The focal theme of the present investigation was to use chemo-autotrophic activated carbon oxidation(CAACO) reactor, an immobilized cell reactor using chemoautotrophs for the treatment of tannery wastewater. The treatment scheme comprised of anaerobic treatment, sand filtration, and CAACO reactor, which remove COD, BOD, TOC, VFA and sulphides respectively by 86%, 95%, 81%, 71% and 100%. Rice bran mesoporous activated carbon prepared indigenously and was used for immobilization of chemoautotrophs. The degradation of xenobiotic compounds by CAACO was confirmed through HPLC and FT-IR techniques.

Relationship Between Iron Oxides and Surface Charge Characteristics in Soils

The relationship between iron oxides and surface charge characteristics in variable charge soils ( latosol and red earth ) was studied in following three ways. ( 1 ) Remove free iron oxides ( Fed ) and amorphous iron oxides ( Feo ) from the soils with sodium dithionite and acid ammonium oxalate solution respectively. ( 2 ) Add 2% glucose ( on the basis of air-dry soil weight ) to soils and incubate under submerged condition to activate iron oxides, and then the mixtures are dehydrated and air-dried to age iron oxides. ( 3 ) Precipitate various crystalline forms of iron oxides onto kaolinite. The results showed that free iron oxides ( Fed ) were the chief carrier of variable positive charges. Of which crystalline iron oxides ( Fed-Feo ) presented mainly as discrete particles in the soils and could only play a role of the carrier of positive charges, and did little influence on negative charges. Whereas the amorphous iron oxides ( Feo ) , which presented mainly as a coating with a large specific surface area, not only had positive charges, but also blocked the negative charge sites in soils. Submerged incubation activated iron oxides in the soils, and increased the amount of amorphous iron oxides and the degree of activation of iron oxide, which resulted in the increase of positive and negative charges of soils. Dehydration and air-dry aged iron oxides in soils and decreased the amount of amorphous iron oxides and the degree of activation of iron oxide, and also led to the decrease of positive and negative charges. Both the submerged incubation and the dehydration and air-dry had no significant influence on net charges. Precipitation of iron oxides onto kaolinite markedly increased positive charges and decreased negative charges. Amorphous iron oxide having a larger surface area contributed more positive charge sites and blocked more negative charge sites in kaolinite than crystalline goethite.

Effects of selenium and sulfur on antioxidants and physiological parameters of garlic plants during senescence

A hydroponic study was conducted to determine the effects of selenium（Se： 0, 3, 6 μmol L^-1） on senescence-related oxidative stress in garlic plants grown under two sulfur（S） levels. We evaluated the yields of plants harvested at 160 and 200 days after sowing. Plants grown under a low Se dose（0.3 μmol L^-1） at low S level showed higher yields（12.0% increase in fresh weight yield, 13.7% increase in dry weight yield） than the controls, despite a decrease in chlorophyll concentration. Compared with control plants, the Se-treated plants showed lower levels of lipid peroxidation. The Se-treated plants also showed higher activities of glut athione peroxidase and catalase, but lower superoxide dismutase activities. Changes in Fv/Fm values and proline contents were affected more strongly by S than by Se. On the basis of our results, we can conclude that Se plays a key role in the antioxidant systems in garlic seedlings. It delays senescence by alleviating the peroxide stress, but it can be toxic at high levels. A high S level may increase tolerance to high Se concentrations through reducing Se accumulation in plants.

Self-reaction of initial active groups in coal

For further understanding of self-heating of coal, we tested the reactions of seven different ranks of coal under inert atmosphere. In the test, 50-gram of coal sample ranged from 0.18 mm to 0.38 mm was put into a special designed copper reaction vessel and let pure nitrogen to flow into the coal sample from the bottom at a rate of 100 mL/min. The programmed temperature enclosure was run at a programmed rate of 0.8 ~C/min. The concentration of the carbon oxides and the coal temperature were tested. The results show that the coal reactions under inert atmosphere can generate CO and C02. The reactions under inert atmosphere are affected by coal ranks, initial pore structure of coal and sulfur content. For low ranks of coal, the productions of carbon oxides are piecewise. The coal temperature is lower than the surrounding temperature throughout the reactions under inert atmosphere, but it rises quickly and reaches a crossing point temperature in the later stage under dry-air atmosphere. Based on the analysis, it indicates the self-reaction of initial active groups exists in the self-heating of coal besides the reactions in the two parallel reactions model. Spontaneous combustion of coal is due to both the oxidation heat accumulation and the chain reaction. A new reaction model of self-heating of coal was orooosed.

Reduction of chromium oxides in stainless steel dust

The recovery of metal oxides from stainless steel dust using C（graphite）, SiFe, and Al as reductants was investigated under various conditions. The apparent distribution ratio of Cr（L Cr ′^m/s ） in the recovered metal and residual slag phases was defined as the major performance metric. The results show that the recovery ratio of metals increases as the ratio of CaO ：SiO2 by mass in the residual slag increases to 1.17. The residual content of metals in the slag decreases as the Al2O3 content of the slag is increased from approximately 8wt% to 10wt%. The recovery ratio of Cr increases with increasing L Cr ′^ m/s , and a linear relationship between L Cr ′^m/s and the activity coefficient ratio of CrO in the slag and the recovered metal phase is observed. The combination of C and SiFe or Al as the reducing agents reveals that Si is the more effective coreductant.

Catalytic synthesis of diethyl carbonate with supported Pd-Cu bimetallic nanoparticle catalysts:Cu(Ⅰ) as the active species

Cupric oxide （CuO） and copper-cuprous oxide （Cu-Cu2O） nanoparticles were prepared by a simple hydrothermal method for the synthesis of diethyi carbonate （DEC） from ethanol. During these syntheses, varying NaOH and glucose concentrations were applied to explore and pinpoint the active species. It was found that PdCl2/CuO and PdCI2/Cu-Cu2O both catalysts exhibited good thermal stability and morphology. The results of catalytic tests showed that the catalysts prepared with 5 mol/L NaOH show superior catalytic performances because of their lower extent of agglomeration. It is noteworthy that the PdC12/Cu-Cu2O catalysts were the most active, especially the PdCl2/Cu-Cu2O catalyst prepared with 10 mmol glucose and having a higher Cu2O concentration. In Pd（ll）-Cu（II） （PdCl2/CuO） catalysts, there is an induction period, during which Pd（II） is reduced to Pd（0）, that must occur prior to electron transfer between Pd and Cu, and this can slow the catalytic reaction. To further pinpoint the active species, PdCl2/Cu-Cu2O catalysts with different Cu2O contents were prepared by controlling the dosages of glucose. The maximum DEC yield obtained with these catalysts was 151.9 mg.g-1.h-1, corresponding to an ethanol conversion of 7.2% and 97.9% DEC selectivity on an ethanol basis. Therefore, it was concluded that Cu＋ was the active species in this catalytic system, possibly because a higher proportion of Cu＋ reduces the Pd2＋ concentration and limits the CO oxidation side reaction, thus increasing DEC selectivity. In addition, Cu＋ promotes electron transfer between Pd and Cu without an induction period, which could also promote the catalytic activity.

Effect of CeO_2 on Crystal Structures and Catalytic Properties of the Mn_2O_3 Catalysts

The manganese-cerium complex oxide catalysts were prepared by coprecipitation.The crystal structures,the desorption properties of surface oxygen and reducibility of these catalysts were investigated by means of X-ray diffraction analysis (XRD),temperature-programmed desopotion-mass spectrography (TPD-MS) and temperature-programmed reduction (TPR).The crystal structure of Mn-O and Mn-Ce-O catalysts are bixbyite-Mn2O3 and γ-Mn2O3 respectively.The presence of CeO2 can not change the position of the feature peaks of Mn2O3 on the TPD or profiles,but can increase evidently the amount of the adsorbed surface oxygen,which are correlated with the catalytic activity for methanol oxidation.The activity of the catalyst is optimum when Mn/Ce atom ratio is 4:1.The presence of CeO2 brings a change of the reducibility,which reveals that there is an interaction between Mn2O3 and CeO2.

An examination of active sites on Au-Ag bimetallic catalysts based on CO oxidation over Au/Ag_2O and a comparison to Ag-contaminated Au powder

There are two theories regarding the origin of the remarkable synergistic effect observed in Au‐Ag bimetallic catalysts when applied to various oxidative reactions. One is based on the importance of the contact interfaces between AgOx regions and the surface of the bulk Au as active working sites, while the other holds that charge transfer from Ag to Au in a surface Au‐Ag alloy causes the catalytic activity. One key point in examining these theories and determining the origin of the synergy in‐volves determining whether or not Ag exists as an oxide or as a metallic alloy on the Au surface. To confirm that enhanced activity results from contact between Ag2O and Au nanoparticles （NPs）, a comparative study of catalytic CO oxidation over Au/Ag2O and Ag2O was performed in the present work, using a closed recirculation reaction system. A reaction mixture consisting of a stoichiometric composition of CO and O2 （CO/O2=2/1） was supplied to both catalysts and the resulting pressure decrease rates were tracked, from which the amounts of gas consumed as well as the quantity of CO2 produced were determined. The steady state reactions of both Au/Ag2O and Ag2O did not lead to any meaningful difference in the rate of pressure decrease during the oxidation. The pressure decrease over both catalysts was attributed to the reduction of surface lattice O on Ag2O by CO. The results obtained for Au/Ag2O are in good agreement with previous data resulting from the use of Ag‐contaminated Au powder （Ag/Au‐b） having an oxidized surfaces. This finding suggests that the perimeters between AgOx zones and the bulk Au surface may not function as active sites during CO oxidation. A review of previous results obtained with Ag/Au‐b specimens having so‐called steady state surfaces indicates that AgOx species in such materials are reduced to the 0 state to form a Ag‐Au alloy that provides the active sites.

Effect of Addition of Sm_2O_3 on Property of CuO-γ-Al_2O_3 Catalyst

Effect of the addition of Sm 2O 3 on CuO γ Al 2O 3 catalyst for CO oxidation reaction was investigated. The result shows that the right amount of Sm 2O 3 can promote the adsorption of the surface oxygen and recovery of CuO γ Al 2O 3 catalyst. Sm 2O 3 plays an important role in change of γ Al 2O 3 phase into θ Al 2O 3 phase. In addition, the right amount of Sm 2O 3(5%) can improve the oxidation activity of the CuO γ Al 2O 3 catalyst. Whereas an excess of Sm 2O 3(10%) makes the CuO crystal in CuO γ Al 2O 3 catalyst become bigger and restrain the oxidation activity of the CuO γ Al 2O 3 catalyst.

Intensification of bituminous coal and lignite oxidation by copper-based activating additives

The oxidation of lignite and bituminous coal samples modified by 5 wt%(in terms of dry salt)addition of copper salts Cu(NO_(3))_(2),CuSO_(4),and Cu(CH_(3)COO)_(2) was studied.The samples’reactivity was studied by thermogravimetry within a temperature range of 45–600℃ at a heating rate of 2.5℃/min in an oxidizing environment.The introduction of activating additives has resulted in a significant decrease in the temperature of intense oxidation onset(ΔT_(i)=20/94℃),in a reduction in the sample residence time in the volatile matter release region(Δt_(e)=2/22 min)and the total duration of the coal combustible mass oxidation(Δt_(f)=8/14 min).The Friedman method was used to calculate the activation energy values for the oxidation process of the modified samples.The maximum change in activation energy values was observed for the bituminous coal sample.The possible mechanism behind the action of the copper-salt additives,which activate the oxidation of lignite and bituminous coal,is discussed.According to the data of mass spectrometric analysis,the concentration of NOx in the reaction products decreases as the temperature of the activated oxidation process is shifted towards the low-temperature region.

Analysis of CO_3O_4/ Mildly Oxidized Graphite Oxide(mGO)Nanocomposites of Mild Oxidation Degree for the Removal of Acid Orange 7

In this study,a series of Co_3O_4/ mildly oxidized graphite oxide(mGO) nanocatalysts(Co_3O_4/ mGO-l,Co_3O_4/ mGO-2 and Co_3O_4/mGO-3) were synthesized through solvothermal method and used as a mediator for the heterogeneous peroxymonosulfate(PMS)activation.The performance of CO_3O_4 / mGO/PMS system was investigated using acid orange 7(AO7).Results showed that Co_3O_4/mGO-3 had the best degradation efficiency of AO7 and the removal rate was above 90%in about 6 min.The phenomenon indicated the catalytic activity of Co_3O_4/mGO composites was related to the oxidation degree of graphite oxide(GO).In addition,experiments showed the content of Co_3O_4 had an effect on the catalytic activity.The composites were characterized with X-ray powder diffraction(XRD),FTIR,Raman,X-ray photoelectron spectroscopy(XPS) and transmission electron microscopy(TEM).According to the charactrization and synergistic catalytic mechanism,the generation of Co—OH complexes found to be the initial step to activate PMS in the heterogeneous system of Co_3O_4/mGO hybrid.