Very low density lipoprotein (VLDL) was incubated with CuCl2(10 μmol/L) at room temperature for 24 hours.The thiobarbituric acid reactive substance (TBARS) was much higher and the electrophoretic mobility was much fa...Very low density lipoprotein (VLDL) was incubated with CuCl2(10 μmol/L) at room temperature for 24 hours.The thiobarbituric acid reactive substance (TBARS) was much higher and the electrophoretic mobility was much faster in VLDL after incubation with CuCl2 than that in VLDL without incubation with CuCl2.It demonstrated that VLDL was oxidatively modified by Cu2+. Endothelial cells were pretreated with normal VLDL ( N-VLDL ) and oxidatively modified VLDL (OVLDL) and then the adhesion of monocyte to endothelial cells was assayed. We observed that O-VLDL at all the concentrations used enhanced monocyte adhesion to endothelial cells significantly. The results suggest that oxidative modification of VLDL may play a role in the early stage of atherogenesis by increasing monocyte adhesion to endothelial cells.展开更多
A novel sensor for ocean electric field testing has been fabricated by polyacrylonitrile-based on carbon fibers with electro-chemical oxidation.The surface profile characteristics of the carbon fibers were characteriz...A novel sensor for ocean electric field testing has been fabricated by polyacrylonitrile-based on carbon fibers with electro-chemical oxidation.The surface profile characteristics of the carbon fibers were characterized by scanning electron microscope,Fourier transform infrared spectra and contact angle.Cyclic voltammetry and Tafel curves have been used to study its electro-chemical performances.Two identical electrodes in sea water as the electric field sensor will swiftly respond to applied electric field which causes positive and negative ions to move in opposite direction,resulting in a electric potential difference(ΔE).Test result indicates that the offset potential is typically below 1 m V with a drift of 60-170μVd^-1.Typical self noise level is 1.07 nV√Hz^(1/2)@1 Hz.The electric field response indicates that the modified electrode pair shows better response to AC sine signal of amplitude and frequency(5 mV and 1 mHz)respectively than its blank.The electric field response model of the modified electrodes is creatively presented according to its electric double layer capacitance and Faraday pseudo-capacitance.Many advantages of the carbon fiber electric field electrode will make it have potential application prospect.展开更多
In this study, compounded surface modification technology-high current pulsed electron beam (HCPEB) + micro-plasma oxidation (MPO) was applied to treat ZK60 Mg alloys. The characteristics of the microstructure of...In this study, compounded surface modification technology-high current pulsed electron beam (HCPEB) + micro-plasma oxidation (MPO) was applied to treat ZK60 Mg alloys. The characteristics of the microstructure of ZK60 Mg alloy after single MPO and HCPEB+MPO compounded treatment were investigated by SEM. The results showed that the density of the ceramic layer of HCPEB+MPO-treated ZK60 Mg alloy was improved and defects were reduced compared to that under MPO treatment alone. Surface modified layer of ZK60 Mg alloys treated by HCPEB+MPO was divided into three zones, namely the top loose ceramic zone, middle compact zone and inside HCPEB-induced melted zone. Corrosion resistance of ZK60 Mg alloy before and after the compounded surface modification was measured in a solution of 3.5% NaCl by potentiodynamic polarization curves. It was found that the corrosion current density of ZK60 Mg alloys could be reduced by about three orders of magnitude, from 311μA/cm^2 of the original sample to 0.2μA/cm^2 of the HCPEB+MPO-treated sample. This indicates the great application potential of the HCPEB+MPO compounded surface modification technology in improving the corrosion resistance of ZK60 Mg alloys in the future.展开更多
Adsorption can be used to recover effectively the volatile organic gases(VOCs)in the exhaust gas from factories through using an appropriate adsorption bed.Due to form a physical or chemical bond,adsorption occurs bet...Adsorption can be used to recover effectively the volatile organic gases(VOCs)in the exhaust gas from factories through using an appropriate adsorption bed.Due to form a physical or chemical bond,adsorption occurs between the porous solid medium and the liquid or gas multi component fluid mixture.The regeneration capa-city of the adsorbent is as important as the adsorption capacity and it determines the economics of the adsorption system.The regeneration of adsorbent can be realized through changing the pressure or temperature of the system.Here,activated carbon samples from coconut shell were prepared and characterized.Benzene or formal-dehyde in the mixed air was used as the adsorption object,and the adsorption experiment was carried out in a U-shaped bed.Discussed how adsorption was affected by activated carbon type,adsorbate and temperature.The results show that oxidation modifed activated carbon can increase the adsorption effect of form aldehyde,but will reduce the ad sorption effect of benzene,because their ad sorption mechanism is different.At 30℃,the saturated adsorption apacity of AC-0 for benzene is 437.0 mg/g.and that of AC-1 for formaldehyde is 670.5 mg/g.In the experimental range,it is found that the adsorption capacity increases with the decrease of temperature,and their changes are very consistent with the ftted ExpDecay1 function.展开更多
A simple method for the magnetic modification of various types of powdered agglomerate forming dia- magnetic materials was developed. Magnetic iron oxide particles were prepared from ferrous sulfate by microwave assis...A simple method for the magnetic modification of various types of powdered agglomerate forming dia- magnetic materials was developed. Magnetic iron oxide particles were prepared from ferrous sulfate by microwave assisted synthesis. A suspension of the magnetic particles in water soluble organic solvent (methanol, ethanol, propanol, isopropyl alcohol, or acetone) was mixed with the material to be modified and then completely dried at elevated temperature. The magnetically modified materials were found to be stable in water suspension at least for 2 months.展开更多
Ischemic preconditioning(IPC)is a potential intervention known to protect the heart against ischemia/reperfusion injury,but its role in the no-reflow phenomenon that follows reperfusion is unclear.Dihydrotanshinone I(...Ischemic preconditioning(IPC)is a potential intervention known to protect the heart against ischemia/reperfusion injury,but its role in the no-reflow phenomenon that follows reperfusion is unclear.Dihydrotanshinone I(DT)is a natural compound and this study illustrates its role in cardiac ischemic injury from the aspect of IPC.Pretreatment with DT induced modest ROS production and protected cardiomyocytes against oxygen and glucose deprivation(OGD),but the protection was prevented by a ROS scavenger.In addition,DT administration protected the heart against isoprenaline challenge.Mechanistically,PKM2 reacted to transient ROS via oxidization at Cys423/Cys424,leading to glutathionylation and nuclear translocation in dimer form.In the nucleus,PKM2 served as a co-factor to promote HIF-1a-dependent gene induction,contributing to adaptive responses.In mice subjected to permanent coronary ligation,cardiac-specific knockdown of Pkm2 blocked DT-mediated preconditioning protection,which was rescued by overexpression of wild-type Pkm2,rather than Cys423/424-mutated Pkm2.In conclusion,PKM2 is sensitive to oxidation,and subsequent glutathionylation promotes its nuclear translocation.Although IPC has been viewed as a protective means against reperfusion injury,our study reveals its potential role in protection of the heart from no-reflow ischemia.展开更多
Fabrication of silicon carbide(SiC)ceramics by digital light processing(DLP)technology is difficult owing to high refractive index and high ultraviolet(UV)absorptivity of SiC powders.The surface of the SiC powders can...Fabrication of silicon carbide(SiC)ceramics by digital light processing(DLP)technology is difficult owing to high refractive index and high ultraviolet(UV)absorptivity of SiC powders.The surface of the SiC powders can be coated with silicon oxide(SiO_(2))with low refractive index and low UV absorptivity via high-temperature oxidation,reducing the loss of UV energy in the DLP process and realizing the DLP preparation of the SiC ceramics.However,it is necessary to explore a high-temperature modification process to obtain a better modification effect of the SiC powders.Therefore,the high-temperature modification behavior of the SiC powders is thoroughly investigated in this paper.The results show that nano-scale oxide film is formed on the surface of the SiC powders by short-time high-temperature oxidation,effectively reducing the UV absorptivity and the surface refractive index(nʹ)of the SiC powders.When the oxidation temperature is 1300℃,compared with that of unoxidized SiC powders,the UV absorptivity of oxidized SiC powders decreases from 0.5065 to 0.4654,and a curing depth of SiC slurry increases from 22±4 to 59±4μm.Finally,SiC green bodies are successfully prepared by the DLP with the the oxidized powders,and flexural strength of SiC sintered parts reaches 47.9±2.3 MPa after 3 h of atmospheric sintering at 2000℃without any sintering aid.展开更多
Calcium-based desulfurization ash(CDA)is mainly produced in dry and semi-dry flue gas desulfurization processes.The property of CDA is extremely unstable because its main component,calcium sulfite,makes it difficult t...Calcium-based desulfurization ash(CDA)is mainly produced in dry and semi-dry flue gas desulfurization processes.The property of CDA is extremely unstable because its main component,calcium sulfite,makes it difficult to be directly applied to the field of building materials.The modification of desulfurization ash can be realized by high-temperature oxidation and wet oxidation.After modification,CDA can be widely used in building materials.Hydrothermal oxidation has broad development prospects because it can complete the oxidation of CDA and the removal of impurity elements at the same time.CDA can be used to prepare high value-added products of calcium sulfate whiskers and ecological rubber fillers.展开更多
In this work,a modification method of H_(3)PO_(4)plus H_(2)O_(2)(PHP)was introduced to targetedly form abundant oxygenated functional groups(OFGs)on biochar,and methylene blue(MB)was employed as a model pollutant for ...In this work,a modification method of H_(3)PO_(4)plus H_(2)O_(2)(PHP)was introduced to targetedly form abundant oxygenated functional groups(OFGs)on biochar,and methylene blue(MB)was employed as a model pollutant for adsorption to reflect the modification performance.Results indicated that parent biochars,especially derived from lower temperatures,substantially underwent oxidative modification by PHP,and OFGs were targetedly produced.Correspondingly,approximately 21.5-fold MB adsorption capacity was achieved by PHP-modified biochar comparing with its parent biochar.To evaluate the compatibility of PHP-modification,coefficient of variation(CV)based on MB adsorption capacity by the biochar from various precursors was calculated,in which the CV of PHP-modified biochars was 0.0038 comparing to0.64 of the corresponding parent biochars.These results suggested that the PHP method displayed the excellent feedstock compatibility on biochar modification.The maximum MB adsorption capacity was454.1 mg/g when the H_(3)PO_(4)and H_(2)O_(2)fraction in PHP were 65.2%and 7.0%;the modification was further intensified by promoting temperature and duration.Besides,average 94.5%H_(3)PO_(4)was recovered after 10-batch modification,implying 1.0 kg H_(3)PO_(4)(85%)in PHP can maximally modify 2.37 kg biochar.Overall,this work offered a novel method to tailor biochar towards OFGs-rich surface for efficient adsorption.展开更多
Objective To study the activity of Puerarin (Pue) in scavenging oxygen free radical (OFR) and its inhibitory effect on the oxidative modification of low density lipoprotein (LDL). Methods Riboflavin-light system was...Objective To study the activity of Puerarin (Pue) in scavenging oxygen free radical (OFR) and its inhibitory effect on the oxidative modification of low density lipoprotein (LDL). Methods Riboflavin-light system was used to generate superoxide anion, and Fenton reaction to generate hydroxyl free radical to study the activity of Pue in scavenging OFR. Hydrogen peroxide-induced hemolysis was used to study the effect of Pue on erythrocyte hemolysis and malondialdehyde (MDA) production. And ultraviolet ray and cupric sulfate were used to cause the oxidative modification of LDL for studying the inhibitory effect of Pue on LDL oxidative modification. Results (1) Pue could, at concentration of 0. 01 – 1.0 mmol/L, scavenge superoxide anion radical and at concentration of 7.5–75μmol/L scavenge hydroxyl radical in a concentration dependent manner. (2) Pue could, at concentration of 0.1–10 mmol/L, inhibit significantly oxidative hemolysis and MDA production of erythrocyte induced by hydrogen peroxide. (3) Pue of 0.01–1.0 mmol/L could inhibit the oxidative modification of LDL in a concentration dependent manner. Conclusion Pue has an anti-peroxidation effect and shows a potential effect in preventing atherosclerosis.展开更多
In recent decades, magnetic iron nanoparticles (NPs) have attracted much attention due to properties such as superparamagnetism, high surface area, large surface-to-volume ratio, and easy separation under external m...In recent decades, magnetic iron nanoparticles (NPs) have attracted much attention due to properties such as superparamagnetism, high surface area, large surface-to-volume ratio, and easy separation under external magnetic fields. Therefore, magnetic iron oxides have potential for use in numerous applications, including magnetic resonance imaging contrast enhancement, tissue repair, immunoassay, detoxification of biological fluids, drug delivery, hyperthermia, and cell separation. This review provides an updated and integrated focus on the fabrication and characterization of suitable magnetic iron NPs for biotechnological applications. The possible perspective and some challenges in the further development of these NPs are also discussed.展开更多
Pd@Zr/Ce O2 core-shell catalyst prepared by hydrothermal method was applied in CO oxidation reaction, exhibiting high CO oxidation activity at low temperature.XRD(X-ray diffraction) analysis demonstrated that the re...Pd@Zr/Ce O2 core-shell catalyst prepared by hydrothermal method was applied in CO oxidation reaction, exhibiting high CO oxidation activity at low temperature.XRD(X-ray diffraction) analysis demonstrated that the remarkable enhancement of catalytic performance was found to depend on the presence of more oxygen vacancies in the core-shell structure, which contributed higher content of and ready release of active oxygen species at low temperature, confirmed by H2-TPR(temperature programed reduction) results.Interestingly, introducing a small amount of zirconium(0.5 wt.%) exhibited a significant improvement of catalytic activity because the introduction of Zr further improved the amount of crystal defects and promoted the migration of oxygen species.展开更多
Mciro-arc oxidation(MAO)was used to coat porous films on the surface of a Zr-based bulk metallic glass sample.The compressive test results indicated that,compared with the as-cast sample,the MAO treated one exhibite...Mciro-arc oxidation(MAO)was used to coat porous films on the surface of a Zr-based bulk metallic glass sample.The compressive test results indicated that,compared with the as-cast sample,the MAO treated one exhibited higher deformation capacity,associated with multiple shear bands with higher density on the side surface and well-developed vein patterns with smaller size on the fractured surface.The pore in the MAOed film and the matrix/coating interface initiated the shear bands and impeded the rapid propagation of shear bands,thus favoring the enhanced plasticity of the MAO treated sample.The obtained results demonstrated that MAO can be considered as an effective method to finely tune the mechanical performance of monolithic bulk metallic glasses.展开更多
The phytohormone auxin plays a pivotal role in governing plant growth and development.Although the TRANSPORT INHIBITOR RESPONSE1/AUXIN SIGNALING F-BOX(TIR1/AFB)receptors function in both the nucleus and cytoplasm,the ...The phytohormone auxin plays a pivotal role in governing plant growth and development.Although the TRANSPORT INHIBITOR RESPONSE1/AUXIN SIGNALING F-BOX(TIR1/AFB)receptors function in both the nucleus and cytoplasm,the mechanism governing the distribution of TIR1/AFBs between these cellular compartments remains unknown.In this study,we demonstrate that auxin-mediated oxidation of TIR1/AFB2 is essential for their targeting to the nucleus.We showed that small active molecules,reactive oxygen species(ROS)and nitric oxide(NO),are indispensable for the nucleo-cytoplasmic distribution of TIR1/AFB2 in trichoblasts and root hairs.Further studies revealed that this process is regulated by the FERONIA receptor kinase–NADPH oxidase signaling pathway.Interestingly,ROS and NO initiate oxidative modifications in TIR1C140/516 and AFB2C135/511,facilitating their subsequent nuclear import.The oxidized forms of TIR1C140/516 and AFB2C135/511 play a crucial role in enhancing the function of TIR1 and AFB2 in transcriptional auxin responses.Collectively,our study reveals a novel mechanism by which auxin stimulates the transport of TIR1/AFB2 from the cytoplasm to the nucleus,orchestrated by the FERONIA–ROS signaling pathway.展开更多
文摘Very low density lipoprotein (VLDL) was incubated with CuCl2(10 μmol/L) at room temperature for 24 hours.The thiobarbituric acid reactive substance (TBARS) was much higher and the electrophoretic mobility was much faster in VLDL after incubation with CuCl2 than that in VLDL without incubation with CuCl2.It demonstrated that VLDL was oxidatively modified by Cu2+. Endothelial cells were pretreated with normal VLDL ( N-VLDL ) and oxidatively modified VLDL (OVLDL) and then the adhesion of monocyte to endothelial cells was assayed. We observed that O-VLDL at all the concentrations used enhanced monocyte adhesion to endothelial cells significantly. The results suggest that oxidative modification of VLDL may play a role in the early stage of atherogenesis by increasing monocyte adhesion to endothelial cells.
基金supported by the National Defense Science and Technology Innovation Zone Project(No.18-H863-05-ZT-001-018-09)
文摘A novel sensor for ocean electric field testing has been fabricated by polyacrylonitrile-based on carbon fibers with electro-chemical oxidation.The surface profile characteristics of the carbon fibers were characterized by scanning electron microscope,Fourier transform infrared spectra and contact angle.Cyclic voltammetry and Tafel curves have been used to study its electro-chemical performances.Two identical electrodes in sea water as the electric field sensor will swiftly respond to applied electric field which causes positive and negative ions to move in opposite direction,resulting in a electric potential difference(ΔE).Test result indicates that the offset potential is typically below 1 m V with a drift of 60-170μVd^-1.Typical self noise level is 1.07 nV√Hz^(1/2)@1 Hz.The electric field response indicates that the modified electrode pair shows better response to AC sine signal of amplitude and frequency(5 mV and 1 mHz)respectively than its blank.The electric field response model of the modified electrodes is creatively presented according to its electric double layer capacitance and Faraday pseudo-capacitance.Many advantages of the carbon fiber electric field electrode will make it have potential application prospect.
基金supported by Liaoning BaiQianWan Talents Program of China (No. 2008921028)Doctoral Fund of Ministry of Education of China (No. 200801451082)
文摘In this study, compounded surface modification technology-high current pulsed electron beam (HCPEB) + micro-plasma oxidation (MPO) was applied to treat ZK60 Mg alloys. The characteristics of the microstructure of ZK60 Mg alloy after single MPO and HCPEB+MPO compounded treatment were investigated by SEM. The results showed that the density of the ceramic layer of HCPEB+MPO-treated ZK60 Mg alloy was improved and defects were reduced compared to that under MPO treatment alone. Surface modified layer of ZK60 Mg alloys treated by HCPEB+MPO was divided into three zones, namely the top loose ceramic zone, middle compact zone and inside HCPEB-induced melted zone. Corrosion resistance of ZK60 Mg alloy before and after the compounded surface modification was measured in a solution of 3.5% NaCl by potentiodynamic polarization curves. It was found that the corrosion current density of ZK60 Mg alloys could be reduced by about three orders of magnitude, from 311μA/cm^2 of the original sample to 0.2μA/cm^2 of the HCPEB+MPO-treated sample. This indicates the great application potential of the HCPEB+MPO compounded surface modification technology in improving the corrosion resistance of ZK60 Mg alloys in the future.
基金The authors acknowledge the financial support from the National Natural Science Foundation of China(Grants Nos.21978287 and 21906139)Henan Province Key Research and Development and Promotion Special(No.182102311016).
文摘Adsorption can be used to recover effectively the volatile organic gases(VOCs)in the exhaust gas from factories through using an appropriate adsorption bed.Due to form a physical or chemical bond,adsorption occurs between the porous solid medium and the liquid or gas multi component fluid mixture.The regeneration capa-city of the adsorbent is as important as the adsorption capacity and it determines the economics of the adsorption system.The regeneration of adsorbent can be realized through changing the pressure or temperature of the system.Here,activated carbon samples from coconut shell were prepared and characterized.Benzene or formal-dehyde in the mixed air was used as the adsorption object,and the adsorption experiment was carried out in a U-shaped bed.Discussed how adsorption was affected by activated carbon type,adsorbate and temperature.The results show that oxidation modifed activated carbon can increase the adsorption effect of form aldehyde,but will reduce the ad sorption effect of benzene,because their ad sorption mechanism is different.At 30℃,the saturated adsorption apacity of AC-0 for benzene is 437.0 mg/g.and that of AC-1 for formaldehyde is 670.5 mg/g.In the experimental range,it is found that the adsorption capacity increases with the decrease of temperature,and their changes are very consistent with the ftted ExpDecay1 function.
文摘A simple method for the magnetic modification of various types of powdered agglomerate forming dia- magnetic materials was developed. Magnetic iron oxide particles were prepared from ferrous sulfate by microwave assisted synthesis. A suspension of the magnetic particles in water soluble organic solvent (methanol, ethanol, propanol, isopropyl alcohol, or acetone) was mixed with the material to be modified and then completely dried at elevated temperature. The magnetically modified materials were found to be stable in water suspension at least for 2 months.
基金supported by the National Key R&D Program of China(2019YFC1711000)the National Natural Science Foundation of China(No.81421005)the“111”Project(B16046)from the Ministry of Education of China and the State Administration of Foreign Experts Affairs of China。
文摘Ischemic preconditioning(IPC)is a potential intervention known to protect the heart against ischemia/reperfusion injury,but its role in the no-reflow phenomenon that follows reperfusion is unclear.Dihydrotanshinone I(DT)is a natural compound and this study illustrates its role in cardiac ischemic injury from the aspect of IPC.Pretreatment with DT induced modest ROS production and protected cardiomyocytes against oxygen and glucose deprivation(OGD),but the protection was prevented by a ROS scavenger.In addition,DT administration protected the heart against isoprenaline challenge.Mechanistically,PKM2 reacted to transient ROS via oxidization at Cys423/Cys424,leading to glutathionylation and nuclear translocation in dimer form.In the nucleus,PKM2 served as a co-factor to promote HIF-1a-dependent gene induction,contributing to adaptive responses.In mice subjected to permanent coronary ligation,cardiac-specific knockdown of Pkm2 blocked DT-mediated preconditioning protection,which was rescued by overexpression of wild-type Pkm2,rather than Cys423/424-mutated Pkm2.In conclusion,PKM2 is sensitive to oxidation,and subsequent glutathionylation promotes its nuclear translocation.Although IPC has been viewed as a protective means against reperfusion injury,our study reveals its potential role in protection of the heart from no-reflow ischemia.
基金supported by grants from the Key Project Fund for Science and Technology Development of Guangdong Province (2020B090924003)the National Natural Science Foundation of China (51975230)Major Special Projects of Technological Innovation in Hubei Province (2019AAA002).
文摘Fabrication of silicon carbide(SiC)ceramics by digital light processing(DLP)technology is difficult owing to high refractive index and high ultraviolet(UV)absorptivity of SiC powders.The surface of the SiC powders can be coated with silicon oxide(SiO_(2))with low refractive index and low UV absorptivity via high-temperature oxidation,reducing the loss of UV energy in the DLP process and realizing the DLP preparation of the SiC ceramics.However,it is necessary to explore a high-temperature modification process to obtain a better modification effect of the SiC powders.Therefore,the high-temperature modification behavior of the SiC powders is thoroughly investigated in this paper.The results show that nano-scale oxide film is formed on the surface of the SiC powders by short-time high-temperature oxidation,effectively reducing the UV absorptivity and the surface refractive index(nʹ)of the SiC powders.When the oxidation temperature is 1300℃,compared with that of unoxidized SiC powders,the UV absorptivity of oxidized SiC powders decreases from 0.5065 to 0.4654,and a curing depth of SiC slurry increases from 22±4 to 59±4μm.Finally,SiC green bodies are successfully prepared by the DLP with the the oxidized powders,and flexural strength of SiC sintered parts reaches 47.9±2.3 MPa after 3 h of atmospheric sintering at 2000℃without any sintering aid.
基金This work was supported by the National Natural Science Foundation of China(Grant No.51704004).
文摘Calcium-based desulfurization ash(CDA)is mainly produced in dry and semi-dry flue gas desulfurization processes.The property of CDA is extremely unstable because its main component,calcium sulfite,makes it difficult to be directly applied to the field of building materials.The modification of desulfurization ash can be realized by high-temperature oxidation and wet oxidation.After modification,CDA can be widely used in building materials.Hydrothermal oxidation has broad development prospects because it can complete the oxidation of CDA and the removal of impurity elements at the same time.CDA can be used to prepare high value-added products of calcium sulfate whiskers and ecological rubber fillers.
基金the National Natural Science Foundation of China(No.21978183)。
文摘In this work,a modification method of H_(3)PO_(4)plus H_(2)O_(2)(PHP)was introduced to targetedly form abundant oxygenated functional groups(OFGs)on biochar,and methylene blue(MB)was employed as a model pollutant for adsorption to reflect the modification performance.Results indicated that parent biochars,especially derived from lower temperatures,substantially underwent oxidative modification by PHP,and OFGs were targetedly produced.Correspondingly,approximately 21.5-fold MB adsorption capacity was achieved by PHP-modified biochar comparing with its parent biochar.To evaluate the compatibility of PHP-modification,coefficient of variation(CV)based on MB adsorption capacity by the biochar from various precursors was calculated,in which the CV of PHP-modified biochars was 0.0038 comparing to0.64 of the corresponding parent biochars.These results suggested that the PHP method displayed the excellent feedstock compatibility on biochar modification.The maximum MB adsorption capacity was454.1 mg/g when the H_(3)PO_(4)and H_(2)O_(2)fraction in PHP were 65.2%and 7.0%;the modification was further intensified by promoting temperature and duration.Besides,average 94.5%H_(3)PO_(4)was recovered after 10-batch modification,implying 1.0 kg H_(3)PO_(4)(85%)in PHP can maximally modify 2.37 kg biochar.Overall,this work offered a novel method to tailor biochar towards OFGs-rich surface for efficient adsorption.
文摘Objective To study the activity of Puerarin (Pue) in scavenging oxygen free radical (OFR) and its inhibitory effect on the oxidative modification of low density lipoprotein (LDL). Methods Riboflavin-light system was used to generate superoxide anion, and Fenton reaction to generate hydroxyl free radical to study the activity of Pue in scavenging OFR. Hydrogen peroxide-induced hemolysis was used to study the effect of Pue on erythrocyte hemolysis and malondialdehyde (MDA) production. And ultraviolet ray and cupric sulfate were used to cause the oxidative modification of LDL for studying the inhibitory effect of Pue on LDL oxidative modification. Results (1) Pue could, at concentration of 0. 01 – 1.0 mmol/L, scavenge superoxide anion radical and at concentration of 7.5–75μmol/L scavenge hydroxyl radical in a concentration dependent manner. (2) Pue could, at concentration of 0.1–10 mmol/L, inhibit significantly oxidative hemolysis and MDA production of erythrocyte induced by hydrogen peroxide. (3) Pue of 0.01–1.0 mmol/L could inhibit the oxidative modification of LDL in a concentration dependent manner. Conclusion Pue has an anti-peroxidation effect and shows a potential effect in preventing atherosclerosis.
文摘In recent decades, magnetic iron nanoparticles (NPs) have attracted much attention due to properties such as superparamagnetism, high surface area, large surface-to-volume ratio, and easy separation under external magnetic fields. Therefore, magnetic iron oxides have potential for use in numerous applications, including magnetic resonance imaging contrast enhancement, tissue repair, immunoassay, detoxification of biological fluids, drug delivery, hyperthermia, and cell separation. This review provides an updated and integrated focus on the fabrication and characterization of suitable magnetic iron NPs for biotechnological applications. The possible perspective and some challenges in the further development of these NPs are also discussed.
基金Project supported by the Introduction of Talent and Technology Cooperation Plan of Tianjin
文摘Pd@Zr/Ce O2 core-shell catalyst prepared by hydrothermal method was applied in CO oxidation reaction, exhibiting high CO oxidation activity at low temperature.XRD(X-ray diffraction) analysis demonstrated that the remarkable enhancement of catalytic performance was found to depend on the presence of more oxygen vacancies in the core-shell structure, which contributed higher content of and ready release of active oxygen species at low temperature, confirmed by H2-TPR(temperature programed reduction) results.Interestingly, introducing a small amount of zirconium(0.5 wt.%) exhibited a significant improvement of catalytic activity because the introduction of Zr further improved the amount of crystal defects and promoted the migration of oxygen species.
基金the financial support from the National Natural Science Foundation of China(Grant Nos.51371065,51671070,51671067,51671071)the Opening Funding of AWJ-16-Z02 in the State Key Laboratory of Advanced Welding and Joining,China
文摘Mciro-arc oxidation(MAO)was used to coat porous films on the surface of a Zr-based bulk metallic glass sample.The compressive test results indicated that,compared with the as-cast sample,the MAO treated one exhibited higher deformation capacity,associated with multiple shear bands with higher density on the side surface and well-developed vein patterns with smaller size on the fractured surface.The pore in the MAOed film and the matrix/coating interface initiated the shear bands and impeded the rapid propagation of shear bands,thus favoring the enhanced plasticity of the MAO treated sample.The obtained results demonstrated that MAO can be considered as an effective method to finely tune the mechanical performance of monolithic bulk metallic glasses.
基金supported by grants from the National Natural Science Foundation of China(32230009,31770307,31972863)the Science and Technology Innovation Plan Of Shanghai Science and Technology Commission(20ZR1416500).
文摘The phytohormone auxin plays a pivotal role in governing plant growth and development.Although the TRANSPORT INHIBITOR RESPONSE1/AUXIN SIGNALING F-BOX(TIR1/AFB)receptors function in both the nucleus and cytoplasm,the mechanism governing the distribution of TIR1/AFBs between these cellular compartments remains unknown.In this study,we demonstrate that auxin-mediated oxidation of TIR1/AFB2 is essential for their targeting to the nucleus.We showed that small active molecules,reactive oxygen species(ROS)and nitric oxide(NO),are indispensable for the nucleo-cytoplasmic distribution of TIR1/AFB2 in trichoblasts and root hairs.Further studies revealed that this process is regulated by the FERONIA receptor kinase–NADPH oxidase signaling pathway.Interestingly,ROS and NO initiate oxidative modifications in TIR1C140/516 and AFB2C135/511,facilitating their subsequent nuclear import.The oxidized forms of TIR1C140/516 and AFB2C135/511 play a crucial role in enhancing the function of TIR1 and AFB2 in transcriptional auxin responses.Collectively,our study reveals a novel mechanism by which auxin stimulates the transport of TIR1/AFB2 from the cytoplasm to the nucleus,orchestrated by the FERONIA–ROS signaling pathway.