Structure-dependent re-dispersibility of graphene oxide powders prepared by fast spray drying

The graphene oxide powder(GOP)obtained from the spray drying process often exhibits poor redispersibility which is considered due to the partial reduction of GO sheets.The reduction of drying temperature can effectively increase the redispersibility of GOP,but result in a decreased drying efficiency.Herein,we found that the redispersibility of GOP is strongly affected by its microstructure,which is determined by the feed concentration.With the increase of feed concentration,the GO nanosheet assembly varies from the disordered stacking to relatively oriented assembly,making the morphology of the GOP transform from balllike(the most crumpled one)to flakelike(the least crumpled one),and the 0.8 mgml 1 is the threshold concentration for the morphology,structure,and redispersibility change.Once the feed concentration reaches 0.8 mg ml 1,the appearance of the nematic phase in droplet ensures the relatively oriented assembly of GO sheets to form the layered structure with a low crumpling degree,which greatly improves the polar parts surface tension of the solid GOP,making the GOP easier to form hydrogen bonding with water during the redispersion process,thus stabilizing dispersion.This work provides useful information for understanding the relationships between the morphology,microstructure,and final redispersibility of GOPs.

Buckling analysis of embedded graphene oxide powder-reinforced nanocomposite shells

In this study,the buckling analysis of a Graphene oxide powder reinforced(GOPR)nanocomposite shell is investigated.The effective material properties of the nanocomposite are estimated through Halpin-Tsai micromechanical scheme.Three distribution types of GOPs are considered,namely uniform,X and O.Also,a first-order shear deformation shell theory is incorporated with the principle of virtual work to derive the governing differential equations of the problem.The governing equations are solved via Galerkin’s method,which is a powerful analytical method for static and dynamic problems.Comparison study is performed to verify the present formulation with those of previous data.New results for the buckling load of GOPR nanocomposite shells are presented regarding for different values of circumferential wave number.Besides,the influences of weight fraction of nanofillers,length and radius to thickness ratios and elastic foundation on the critical buckling loads of GOP-reinforced nanocomposite shells are explored.

Oxidation Properties of Silver Alloy Powders and Microstructures of Oxidized Powders for Making Electrical Contact Composites

The oxidation properties of silver alloy powders and microstructures of oxidized powders have been investigated by thermo gravity analysis(TGA), scanning electron microscopy(SEM) and wave dispersive X ray spectroscopy(WDEX). Ag Sn RE alloy powders have been oxidized completely at 610 ℃ within 60 min, with an external pure silver scale forming around each oxidized particle. It is useful to produce electrical contact composites. The excellent oxidation properties of Ag Sn RE alloy powders are attributed to the ideal microstructure of the oxidized powders.

Review on Enhancement of Nitridation of Si Powder

This paper reviewed the effect of powder characteristics and additives including metals,rare earth oxides,and ZrO2 on nitridation of Si powder.The decrease of particle size of Si powder increased nitridation.Most of metal additives inhibited nitridation,while some metal additives such as Fe,Cu,Cr,and Ca increased nitrida—tion.Otherwise,the addition of metals might lead to the degradation of physical and mechanical properties of Si3N4.All the rare earth oxides,especially CeO2 and Eu2O3,showed nitridation enhancing effect.In addition,ZrO2 with small particle size showed a stronger enhancing effect.

Empirical Study of Classification Process for Two-stage Turbo Air Classifier in Series

The suitable process parameters for a two-stage turbo air classifier are important for obtaining the ultrafine powder that has a narrow particle-size distribution, however little has been published internationally on the classification process for the two-stage turbo air classifier in series. The influence of the process parameters of a two-stage turbo air classifier in series on classification performance is empirically studied by using aluminum oxide powders as the experimental material. The experimental results show the following: 1) When the rotor cage rotary speed of the first-stage classifier is increased from 2 300 r/min to 2 500 r/min with a constant rotor cage rotary speed of the second-stage classifier, classification precision is increased from 0.64 to 0.67. However, in this case, the final ultrafine powder yield is decreased from 79% to 74%, which means the classification precision and the final ultrafine powder yield can be regulated through adjusting the rotor cage rotary speed of the first-stage classifier. 2) When the rotor cage rotary speed of the second-stage classifier is increased from 2 500 r/min to 3 100 r/min with a constant rotor cage rotary speed of the first-stage classifier, the cut size is decreased from 13.16 μm to 8.76 μm, which means the cut size of the ultrafine powder can be regulated through adjusting the rotor cage rotary speed of the second-stage classifier. 3) When the feeding speed is increased from 35 kg/h to 50 kg/h, the 'fish-hook' effect is strengthened, which makes the ultrafine powder yield decrease. 4) To weaken the 'fish-hook' effect, the equalization of the two-stage wind speeds or the combination of a high first-stage wind speed with a low second-stage wind speed should be selected. This empirical study provides a criterion of process parameter configurations for a two-stage or multi-stage classifier in series, which offers a theoretical basis for practical production.

Temperature Dependence and P/Zn Ratio in Phosphoric Acid Treatment of Zinc Oxide

Zinc oxide, which has photocatalytic activity, is used as white pigment for cosmetics. A certain degree of sebum on the skin is decomposed by ultraviolet radiation in sunlight. In this work, zinc oxide was shaken with phosphoric acid to synthesize a white pigment for cosmetics. Zinc oxide was set with 0.1 mol/L of phosphoric acid at P/Zn = 1/1 and 1/2, and then shaking in hot water for 1 h. The chemical composition, powder properties, photocatalytic activity, color phase, and smoothness of the obtained powder were studied. The P/Zn ratio in preparation had an effect on the reaction between phosphoric acid and zinc oxide. The photocatalytic activity of zinc oxide was inhibited by phosphoric acid treatment. The obtained samples had enough high reflectance at the visible light region.

Magnetic modification of diamagnetic agglomerate forming powder materials

A simple method for the magnetic modification of various types of powdered agglomerate forming dia- magnetic materials was developed. Magnetic iron oxide particles were prepared from ferrous sulfate by microwave assisted synthesis. A suspension of the magnetic particles in water soluble organic solvent （methanol, ethanol, propanol, isopropyl alcohol, or acetone） was mixed with the material to be modified and then completely dried at elevated temperature. The magnetically modified materials were found to be stable in water suspension at least for 2 months.

Au nanospheres modified boron-doped diamond microelectrode grown via hydrogen plasma etching solid doping source for dopamine detection

Boron doped diamond(BDD)electrode is a promising electrochemical material for detecting dopamine level in the human’s body.In this work,we developed a new doping source-graphite and solid boron oxide powders to synthesize BDD film with microwave plasma chemical vapor deposition,so as to avoid using toxic or corrosive dopants,such as boroethane and trimethylborate.The synthesized BDD film is pinhole free and with high doping density of 8.44×10^20 cm^-3 calculated from the Raman spectroscopy.Subsequently,Au nanospheres were decorated on the surface of BDD film to improve electrochemical performance of the BDD film.The Au nanoparticles modified BDD electrode demonstrates an excellent electrochemical response,a high sensitivity(in the range of 5μM-1 m M),and a low detection limit(~0.8μM)for detecting dopamine.

Asymmetry ratio as a parameter of Eu^3＋ local environment in phosphors

Study of the local environment of certain ion is quite a complex problem. Due to the unique luminescent properties, Eu^3＋ ions can be used as a structural probe. In this paper, effect of doping concentration,excitation wavelength and excitation mechanism on asymmetry ratio was systematically studied using Y3Al5O12：Eu^3＋, YVO4：Eu^3＋ and Y2O3：Eu^3＋nanophosphors. The asymmetry ratio gives information about the local surrounding and environmental changes around the Eu^3＋ ions. Asymmetry ratios of YAG：Eu^3＋and YVO4：Eu^3＋ nanopowders were calculated using standard technique and the obtained average values were found to be 0.75 and 8.2, respectively. However, it is found that standard method of asymmetry ratio calculation is suitable only for samples where all Eu^3＋ ions occupy one site. The ＂multisite model＂ of asymmetry ratio calculation was developed and used for Y2O3：Eu^3＋ nanocrystalline powders. Average value of asymmetry ratio for Eu^3＋ ions occupied ＂normal＂ sites is 6.0 and for Eu^3＋ ions occupied ＂defect＂sites is 2.3.